The "C" in G18C stands for compensated, not all Glock 18's are compnsated, but they are all fully automatic. Compensation is very helpful with a cyclic rate of 1200 rpm though.
slide gets stuck on hammer cocking wheel thing, my KWJ 32 glock does the same, but its has so many parts cracked (shot maybe 4000bbs throu it) outter barrel cracked at part you mentioned, internal hammer cracked, Slide vents cracked, but it held up well for 4 years.
Hi i have my we g17 that i got last week ago i cleaned it today (I don't play in the field so i only use it for target practice) I put maybe too much silicon oil and the accuracy decreased from straight to going either left or right then suddenly it goes straight. I have checked the nub if it is straight and yes but the bbs go left or right. Any tips on how to maintain accuracy?
New subscriber I like your detailed videos. I have the G19 gen 4 in tan. It will NOT fit in serpa holster for a glock 19 Gen 4. I spent a good 5 minutes of panic trying to get it un holstered. I ended up getting a serpa for a glock 21 and it works great. I have used it for about 6 months now and the paint is chipping everywhere, no big deal for me but others may care. My slide is starting to stick would polishing the outer barrel fix this? it was a real chore for me to get one too I live in Georgia and airsplat would not ship it here I had to get it shipped to family in PA and the they sent it to me. Apparently glock is suing everyone or threatening to who sells these in the US. glock is located in Smyrna GA so I guess they didn't want to poke the bear. I put together a real nice kit for this, I can use it with both the toy and a real glock. All I do is change the holster. the kit is a 5.11 brokos belt serpa 2 holster with one 5.11 dual mag pistol pouch, and 5.11 dual mp5 mag pouch, along with a condor dump pouch. This kit works great ! I can run the toy with 2 extra pistol mags and 2 of the extended magazines. A quick holster change and it runs Glock 19 Gen 4 with 2 g17 mags and 2 of the 33 round happy sticks. Next step is a custom holster to run both of them along with a tlr-1s light.
Excellent review this inspired me to buy my own. It should arrive any day nowww! Btw how long does one can of grren gas last? And I got a gaurder outer barrel but where can I buy most of the internal upgrades for this gun.
Hey! i appreciate the comment :) and im glad i convinced you to get one youll be very happy with the purchase! and to answer some of your questions on the green gas it depends on what size bottle you buys there are different sizes so some big ones hold more and small ones have less. and for internal uprades evike.com still has ALOT so id get em quick before they stop selling them and also ehobbyasia.com as even more i have some guarder on the way from them as we speak :)
Ray Palacio thanks bro! :) im gonna try my best to provide info no one has on youtube or preovide more indepth and easy to understand information! and fixes, repairs, modifications, installments. if you get more guarder parts for your glock and get stumped let me know man ill try my best to assist you!
Great video dude but I have a question can you tell me exactly how you took off the orange tip on your Glock because I just purchased mine from the same website you got yours from it just came in please get back with me ASAP ?????
thanks bro! and i used a white crayon which is a quicker and cheaper alternative but works just as good as anything else. and as for upgrades i have a bunch of guarder coming for this pistol all tokyo marui from ehobbyasia.com so ill be making video soon on how to install all of those on WE pistols glocks only pretty much lol
what holster/magazine do you use? I am thinking about getting this sidearm and want to know about the accessories first. If you could provide a link that would be greatly appreciated!
William W If your after a solid plastic kind of thing go for a blackhawk serpa glock 17/22/31 holster, really good holster with a nice release button catch to make sure its nice and secured :)
Hello, how are you? I live in Brazil so I'm sorry for English because I'm using a translator. Recently I got a similar model, great GBB, but I found your magazine retainer very light, with little pressure with it ejects it, I found that a negative point, I wonder if your pistol also is this or if mine came with some defect? Thank you.
are those regular threads in the barrel? Cause when i bought mine today the first thing i did was take the orange tip off and i was kind of disappointed with the threads or whatever those are. Help please?
Yes the threads are reversed and kinda crappy they might be gunked with the adhesive you would need to buy a thread adapter if your trying to fit like a suppressor or something
hey i was curious about how propane works in this gun if it dries it out really quick or functions properly also just curious about how long a can of green gas will last?
well propane will always be harsh on the seals since its a dry gas. but green gas since its with silicone its better on the gun an lubricates internals as you fire. and not sure maybe like 1000 shots? depends on the size of the green gas can.
I have this gun and i recently went out to shoot it and i noticed that my mag only shot about 10 rounds then it would run out of gas. I live in Arizona and the temperature was about 65 degrees. Is the weather the problem? My mag has no leak.
it could just be weather maybe? but not sure 65 isnt too cold ive had full mags last at 30 F it could be maybe a small leak maybe...try propane it has more pressure than green gas and should last alot longer
Nice vid dude! Hey I was wondering, how well does this perform in coldish weather? 70F-Below? Really want to get this pistol but I'm out of Colorado and it gets pretty cold out here. Any help would be much appreciated!
well being that its green gas powered, youll notice the performance will begin to be affected im gonna say at about 50 degree farenhiet. but for anything around 40 to 30 degrees it wont cycle the bb's well and the mag pretty much empties itelf haha unless you have a large indoor cqb place to go to itll be fine during winter but outside wont work so well. Hope this helps! if you have more questions let me know :D
FrozenSoldierAirsoft Co yea no problem bro! if you have anymore questions ill be on here once and a while haha i might post a video today hopefully lol
heres a picture of it.. change the DOT s4.postimgDOTorg/tdzqo9djh/Whats_App_Image_2016_08_15_at_3_00_24_PM.jpg its the gen 3 version btw so it cant be "newer"
What do you think chances are of getting it past customs, I hear when importing to the US you risk the chance of having it seized by customs because of the Glock copyrights
i know with California it can be an issue from what i heard... but i live in Chicago one of the busiest airports in the US and it got through just fine. they tape off everything to hide the trades and have oranges tips. they also flip the boxes inside out to cover an g markings.
yo i have a g17 gen4 im trying to sell but for some reason its "illegal" to sell on ebay and at my local pawn, if ur interested in it hmu on kik - kyrodesigns
MindOfLJ yea its illegal to sell this at a pawn shop.... pawn shops sell real guns for us real men. no real adult who wants an actual firearm is gonna buy a toy...
They stopped selling it. The clossest you will get to a airsoft Glock currently is the APS ACP. They carry a bunch of them on evike. There is also the KWA ATP but it is pretty far from the real Glock in my opinion. www.evike.com/products/44356/
both will work great! TM is gonna last much longer tho and downside to a TM is its all plastic where as WE is metal out of the box ... but its crap metal .but if you have the money you can uprade a TM to be a true beast with metal parts at most for full upgrade on the TM will be like 150 to 200 dollars which isnt horrible if you have that only sidearm. at htis point for you... its gonna be how much you want to spend. hope this helps a bit.
FantasticKoala It’s because Australia thinks that a airsoft gun is a “Firearm” but it’s a toy and they also think that It is “Violent and dangerous” but they don’t cause any damage at all and airsoft is just fun to play with and even if it’s realistic, that’s the point! Australia really needs to fix their minds and make air soft legal..
well lets just say ive had this for 5 years now and of course i modified it extensively, but before i did i know i fired at least several thousand bb's on stock parts and they still all worked fine.
this is what i use now -- www.evike.com/products/38419/ this gas i buy it from a local airsoft shop like 5min away from me. but i switched to propane since its more affordable for me. i still keep green gas in my arsenal just to kinda cleanse the guns with green gas once in a while. But using propane you need some form of silicon so it doesnt ruin your gun.
Well originally these are made with threaded barrel to put on a mock suppressor, but in the US they thread on a plastic orange tip which when removed reveals the threads. hopefully that answered your question?
no thats not what i meant,i own a g18 too and i live in the uk i mean the wear on the outer barrel on mine too has like sivler rings at the end of the barrel
ooh okay i gotcha yeah thats just the metal on metal rubbing. i upgraded my outer barrel on my g18c to guarder it looks so nice and man good luck breaking that thing. the funny thing is that i originally bought it for my g17. everything fit together perfectly on the 18c
should i look into it now? i just got the gun but the ring are already forming bad at the end of the barrel. and my g19 barrel cracked at the chamber like you said. but its alot harder for me to get parts in my country i found someone on ebay that located g19 parts but its very expensive
well i just know the reputation of these parts of not being so good thats why i bought one. have you ordered from any hong kong retailers? thats where i order all my parts at this point since here in the states no US airsoft retailers that sell WE parts or upgrades.
i got that from evike.com 2-3 years ago. not too sure if they have it now, i would check out the hong kong retailers at this point ehobbasia.com and airsoftglobal.com both good companies where i order anyting glock related. just shipping is pricey but their guns are a bit cheaper because of the pricey freight. hope this helps.
Great vid! This mightve been the first review ive ever seen, that actually seemed to focus on relevant stuff and not some dude pretending he's handling a real firearm. Oh and about that TM-compatibility: Is that 100% applicable? I just ordered a G17 and after seing your video i was mainly concerned about finding an aluminium replacement nozzle. Apparently RA-tech doesnt produce those, so will the actual TM-nozzle fit the G17?
thanks bro i really appreciate the comment! :D and for TM-WE compatiability its gonna be a snug fit but with patience and filing of parts it can be done! i have this glock17 in the video which i coverted pretty much to a TMglock lol took a couple days but i made it work :D as for nozzle i have a spare TM guarder nozzle ready but i didnt change it yet since the WE nozzle is still pretty good and works great! and iv used this gun alot and stock nozzle still works! WE isnt all bad as people saylol just proper and extra care is required for this brand. and if your having a tough time finding parts i got EVERYTHING from Ehobbyasia.com Best site ever for parts! i recomend it hopefully this helped! :)
Max Cherepenin Yeah, true dat :D I actually have a PDW which i kinda built up for C02 usage (i live in germany and the temperature down here is waaaay below gas-capabilites) so i guess i was kinda stuck on metal parts. Anyhow, fingers crossed for the WE nozzle, and i totally agree: The newer generation WEs are actually pretty reliable but you never know, Just thinking about the older SCARs and that abomination of a buttplate (im pretty sure thats the wrong phrase, but i hope you know what im talking about, that frigging plastic plate between the receiver and the stock) gives me the shivers haha Anyhow, keep up the good work!
Oh! Your from Germany that's awesome bro! :D but yea I do like WE a lot because of the many custom options they have. Also WE's reputation isn't the greats haha buuuuuuut... You can upgrade WE to outperform alot of higher up airsoft companies like KWA! ;D and other companies lol
well this could be due to something broken in your mag release button have you had a chance to take it apart? also putting thin tape on each side or one side of the mag can also keep in there.
The "C" in G18C stands for compensated, not all Glock 18's are compnsated, but they are all fully automatic. Compensation is very helpful with a cyclic rate of 1200 rpm though.
Thanks!!...Very interresting to know that!
The sight holes on the back of the mag would look pretty cool filled in with brass color.
8 years later they still don’t have it 😂
slide gets stuck on hammer cocking wheel thing, my KWJ 32 glock does the same, but its has so many parts cracked (shot maybe 4000bbs throu it) outter barrel cracked at part you mentioned, internal hammer cracked, Slide vents cracked, but it held up well for 4 years.
where do you get the extendo clips?
Some extended MAGS on Kyairsoft
@@solofixsubliminals5661 i couldnt find any
Is their anywere I can find one of these ??? Pls respond man I need help finding one of these plsssss 😩
@Henry Lubkeman jk army
Defcon airsoft have these
It don't have to be licensed by clock it's already got a serial number on the side they should be at Ellis airsoft by it putting the database
The glock 17 gen 5 l bought in Australia has glock trademarks where they should be it's a double bell brand
Cuz from a typewriter each time you type you got to hit the space button that move it and it would have ejected like it was just like a gun
Between stock TM glock17 and WE g17, which one do you think is better when comes to long term durability?(I'm wondering which one should I get)
Hi i have my we g17 that i got last week ago i cleaned it today (I don't play in the field so i only use it for target practice) I put maybe too much silicon oil and the accuracy decreased from straight to going either left or right then suddenly it goes straight. I have checked the nub if it is straight and yes but the bbs go left or right. Any tips on how to maintain accuracy?
New subscriber I like your detailed videos.
I have the G19 gen 4 in tan.
It will NOT fit in serpa holster for a glock 19 Gen 4. I spent a good 5 minutes of panic trying to get it un holstered. I ended up getting a serpa for a glock 21 and it works great.
I have used it for about 6 months now and the paint is chipping everywhere, no big deal for me but others may care. My slide is starting to stick would polishing the outer barrel fix this?
it was a real chore for me to get one too I live in Georgia and airsplat would not ship it here I had to get it shipped to family in PA and the they sent it to me. Apparently glock is suing everyone or threatening to who sells these in the US.
glock is located in Smyrna GA so I guess they didn't want to poke the bear. I put together a real nice kit for this, I can use it with both the toy and a real glock. All I do is change the holster.
the kit is a 5.11 brokos belt serpa 2 holster with one 5.11 dual mag pistol pouch, and 5.11 dual mp5 mag pouch, along with a condor dump pouch. This kit works great !
I can run the toy with 2 extra pistol mags and 2 of the extended magazines. A quick holster change and it runs Glock 19 Gen 4 with 2 g17 mags and 2 of the 33 round happy sticks. Next step is a custom holster to run both of them along with a tlr-1s light.
I've been trying to find gen4 mags for the G series pistols because I'm left handed and wanted to change the mag release.
Just the mags? They are easily accessable, are you located in the United States?
Yes., though I was referring to mags that are ambidextrous. But I found some at airsoft global.
Try lubricating the outside of the barrel. It works on my firearms.
Nice! What exactly did you do to white up the markers and signs?
Excellent review this inspired me to buy my own. It should arrive any day nowww! Btw how long does one can of grren gas last? And I got a gaurder outer barrel but where can I buy most of the internal upgrades for this gun.
Hey! i appreciate the comment :) and im glad i convinced you to get one youll be very happy with the purchase! and to answer some of your questions on the green gas it depends on what size bottle you buys there are different sizes so some big ones hold more and small ones have less. and for internal uprades evike.com still has ALOT so id get em quick before they stop selling them and also ehobbyasia.com as even more i have some guarder on the way from them as we speak :)
if you have more questions just leave a comment :) and also if oyu like the content and want more info videos definetly subscribe!
Ray Palacio thanks bro! :) im gonna try my best to provide info no one has on youtube or preovide more indepth and easy to understand information! and fixes, repairs, modifications, installments. if you get more guarder parts for your glock and get stumped let me know man ill try my best to assist you!
Great video dude but I have a question can you tell me exactly how you took off the orange tip on your Glock because I just purchased mine from the same website you got yours from it just came in please get back with me ASAP ?????
Well did you ever figure it out
@@clearly_2967 prolly didn't
What kind of sorcery did you use to get the white crayon to ACTUALLY write?
Haha none really, just used a regular crayon .
Nice vids dude...btw how u colored the mark? By liquid paper or what? Mine full black,still searching for upgrading the internal part,have u done it?
thanks bro! and i used a white crayon which is a quicker and cheaper alternative but works just as good as anything else. and as for upgrades i have a bunch of guarder coming for this pistol all tokyo marui from ehobbyasia.com so ill be making video soon on how to install all of those on WE pistols glocks only pretty much lol
H
Now that’s some soft air
Narwabicorn dead 💀
Good review but I think the reason the slide stops half way is the hammer.
yea that or the recoil spring might be weak since i use this alot it might be worn down.
yeah i fixed that problem long ago with a new hammer set up!
I just got this pistol what upgrades do you recommend?
r those bullets reusable
plz reply
i mean yeah you can. I wouldn't advise it as it could damage your gun.
LMAO I aint heard that since middle school yeeaars ago hahaha
Yea you can, you're supposed to duh!!
secular randi yes you can but I don't the pellets smash a bit so shooting it again could damage the gun but your choice
GhoST_ XxFlamesxX well you should not lol
what holster/magazine do you use? I am thinking about getting this sidearm and want to know about the accessories first. If you could provide a link that would be greatly appreciated!
William W If your after a solid plastic kind of thing go for a blackhawk serpa glock 17/22/31 holster, really good holster with a nice release button catch to make sure its nice and secured :)
What’s the difference between the abs we 26 GBB and the we g26 gen4 with plastic frame? I want to get a g26 but I dont know which is better
Hello, how are you? I live in Brazil so I'm sorry for English because I'm using a translator. Recently I got a similar model, great GBB, but I found your magazine retainer very light, with little pressure with it ejects it, I found that a negative point, I wonder if your pistol also is this or if mine came with some defect? Thank you.
hmm sounds like a defective pistol. Mines needs to be pressed pretty good to eject the mag.
yeah if you ordered it recently it should be under some kind of warranty i would give them a call and see if they can do anything about it.
Okay, I'll get in touch with them about the warranty, thank you very much.
On you're future reviews can you please fire off a few rounds to show us how it performs?
+kyle greninger normally i make a seperate video of that.
+Max Cherepenin ok thanks for letting me know
Well good if mine comes with a logo OB peeled off less than a month so there's my eyes on IM have it on
Can I use WE Co2 mag on this? It says it supports the Glock series ut are they Co2 guns? or just the standard GBBs. I can't find any WE co2 guns
I have the same gun and have no idea what the numbers in the back of the mag are for
Did you ever find out if Marui parts are compatible, I just ordered one and I want to know where I can get parts for it just in case.
yeah alot of the parts are, some i did have to modify to fit. alot of sanding.
any recommendations for internal upgrades?
How did this man use 11min on talking about what is metal and what is plastic?😂😂😂
some people might need to know lol you would be surprised how many questions i get on a daily basis regarding the materials of these replicas.
Just change the video title to: "What people might need to know about the WE G17 Airsoft"😂
It’s a review, it’s what he does.
are those regular threads in the barrel? Cause when i bought mine today the first thing i did was take the orange tip off and i was kind of disappointed with the threads or whatever those are. Help please?
Yes the threads are reversed and kinda crappy they might be gunked with the adhesive you would need to buy a thread adapter if your trying to fit like a suppressor or something
Hi max! Do you know how long the stock hammer, sear and valve knocker will last? Or they wear out fast?
Since the making of this video, I still have the same parts and they work just fine.
@@MaxCherepenin how often do you use it?, btw, thanks for the reply!!
Not much nowadays but for the first 4 years basically all the time lol. well over 10k rounds.
@@MaxCherepenin so, there's no really a need to upgrade the hammer parts?
hey i was curious about how propane works in this gun if it dries it out really quick or functions properly also just curious about how long a can of green gas will last?
well propane will always be harsh on the seals since its a dry gas. but green gas since its with silicone its better on the gun an lubricates internals as you fire. and not sure maybe like 1000 shots? depends on the size of the green gas can.
I want to get one tell me how I get one
I have this gun and i recently went out to shoot it and i noticed that my mag only shot about 10 rounds then it would run out of gas. I live in Arizona and the temperature was about 65 degrees. Is the weather the problem? My mag has no leak.
it could just be weather maybe? but not sure 65 isnt too cold ive had full mags last at 30 F it could be maybe a small leak maybe...try propane it has more pressure than green gas and should last alot longer
Did ya add synthetic grease to lubricate places with lot of friction
You can if it’s needed, but very little.
what is the name of that gas and where did you get it. Cuz i got the gun a while back and i cant find that gas anywhere
Do they make 50 rounds for Glock 19x co2?
For Co2 Glock 19, I’d say no right now. The only one I found was sold out, www.evike.com/products/39429/
Yes
How many mags will it take to empty one full gas tank ( I don't really know how to word this I'm more used to c02)
with green gas or propane right around 30-50 rounds if its warmer you will have maximum results with gas efficiency.
Nice vid dude! Hey I was wondering, how well does this perform in coldish weather? 70F-Below? Really want to get this pistol but I'm out of Colorado and it gets pretty cold out here. Any help would be much appreciated!
well being that its green gas powered, youll notice the performance will begin to be affected im gonna say at about 50 degree farenhiet. but for anything around 40 to 30 degrees it wont cycle the bb's well and the mag pretty much empties itelf haha unless you have a large indoor cqb place to go to itll be fine during winter but outside wont work so well. Hope this helps! if you have more questions let me know :D
Max Cherepenin
and thank you for watching! :)
Thanks Man! And no problem, it touched up on some very key details :)
FrozenSoldierAirsoft Co yea no problem bro! if you have anymore questions ill be on here once and a while haha i might post a video today hopefully lol
you operate very operationally
thank you !
Max Cherepenin what was the code
Nigga wtf.
Damm. A budget Glock for only $80 on the website? That’s a good ass deal. Might wanna pick up that gun.
hi could you give me a link for that laser with the cable, it looks awesome.
Where dog to get the mag and great vidio
ARE THOSE BLACK BBS MIXED WITH WHITE OR AM I ABOUT TO HAVE A STROKE
Its white and black lol
hello,
do you know if TM mags work in the we g17?
yes they work just the same as we mags.
hi i just bought the WE glock 17 but it does not have the G logo on the slider.. why is that?
hmm it maybe some form of newer generation of we tech g pistol. this is the first time i have heard of that.
heres a picture of it.. change the DOT
s4.postimgDOTorg/tdzqo9djh/Whats_App_Image_2016_08_15_at_3_00_24_PM.jpg
its the gen 3 version btw so it cant be "newer"
shoulda got the new generation glock 18 the nozzles last and has the option for semi
could you get a link to a store that sells these? i havent been able to find one
www.airsoftglobal.com place in HK freight is expensive becasuse its an international retailer but one of the relaible websites i order from.
Max Cherepenin thanks
What do you think chances are of getting it past customs, I hear when importing to the US you risk the chance of having it seized by customs because of the Glock copyrights
i know with California it can be an issue from what i heard... but i live in Chicago one of the busiest airports in the US and it got through just fine. they tape off everything to hide the trades and have oranges tips. they also flip the boxes inside out to cover an g markings.
I got mine of jkarmy.com
I have been subscribed for a long time I think for 2 or 3 years
nice man! i appreciate that you still enjoy my content! thank you so much!
so did you get it over seas or at airsplat??
airsplat originally, now for united states customers its only available overseas.
Max Cherepenin ok thankyou for replying so fast good video btw👌🏽
thank you so much for watching!
I have a ksc g18c what could I sell it for? I bought it new from ehobby asia for 200$
Where did you get that laser sight? Name?
Do you know if army panda gear is a trustworthy website, is really like to get a glock 17
yo i have a g17 gen4 im trying to sell but for some reason its "illegal" to sell on ebay and at my local pawn, if ur interested in it hmu on kik - kyrodesigns
MindOfLJ yea its illegal to sell this at a pawn shop.... pawn shops sell real guns for us real men. no real adult who wants an actual firearm is gonna buy a toy...
Max, is this sold out? I wanna buy one badly
yeah for the website i bought this from before no longer carries it. Go to airsoftglobal.com and they have many there.
Max Cherepenin Thanks man
Max Cherepenin yo bro did u find or buy one ?
Atom Lord yo bro did u find or buy one anywere ? Pls let me know bro I'm looking to buy one as well .
GloBoyE the black ones are sold out www.airsoftglobal.com/shop/index.php?main_page=product_info&products_id=17630
how come i cant find this gun on airsplat?
+Aztech jitter cause its illegal
They stopped selling it. The clossest you will get to a airsoft Glock currently is the APS ACP. They carry a bunch of them on evike. There is also the KWA ATP but it is pretty far from the real Glock in my opinion.
www.evike.com/products/44356/
+ehrlich3399 yea just gonna get one on armypanda they got a lot of glocks
+Aztech jitter are you sure they can import to America without customs seizing it?
Aztech jitter No he can't be sure. Customs can seize it or not, no telling what. Hes taking a risk.
you do any steel bb or pellet guns?
i have in the past but not for a while.
Where do u get the fuckin mag extensionnnnn *ROARSS* na for real i really need one i already ordered my glocm
Glock
haha on evike.com
Hi I have a G26. How do you adjust the Hop up on the G models
I want one to buy how much for it and where do i get it? Answer my comment plz
Where did you get that gun app
we g17 or tokyo marui g17 ; other than the cost, which one is better?
(I will be using green gas)
both will work great! TM is gonna last much longer tho and downside to a TM is its all plastic where as WE is metal out of the box ... but its crap metal .but if you have the money you can uprade a TM to be a true beast with metal parts at most for full upgrade on the TM will be like 150 to 200 dollars which isnt horrible if you have that only sidearm. at htis point for you... its gonna be how much you want to spend. hope this helps a bit.
+Max Cherepenin can you send me a link to the gun
When you do anther video can you leave the Website too buy the guns at plz
Check out my glock playlist , i have tons of videos there to show where to buy these.
Aw you are so lucky :(..In Australia airsoft is illegal so I can’t get one :(
Why don't they make airsoft guns legal in Australia?
FantasticKoala It’s because Australia thinks that a airsoft gun is a “Firearm” but it’s a toy and they also think that It is “Violent and dangerous” but they don’t cause any damage at all and airsoft is just fun to play with and even if it’s realistic, that’s the point! Australia really needs to fix their minds and make air soft legal..
@@fariborz1981 Dang that sucks. I really hope they change that!
FantasticKoala Mhm.
I started playing with 11 Years.
Do you want to sell it
Originally where the Glock came from it eventually came from the the typewriter
Do a tutorial on how to color in the bullet count on the back of the mag!
how is the durability on these? how much did you shoot it?
well lets just say ive had this for 5 years now and of course i modified it extensively, but before i did i know i fired at least several thousand bb's on stock parts and they still all worked fine.
Test the 110$ umerex m&p 40 smith and Wesson blowback
Joey Perry replica airguns done did that shit
duddee, have you considered getting rid of it, i would trade my sr25 for it!!
Ahhh unfortunately not ! I'm a huge glock fanatic 😁
.how did you take the orange tip off? I tried and it didn't work
you kinda have to just wiggle it arounf not to hard tho lol that sounded dirty but yea dont force it or itll break lmao
Is there any difference between the G17 vs G19 other than the size?
literally nothing lol. The size difference is the only thing.
What green gas do you buy?? Can u put a link for me
this is what i use now -- www.evike.com/products/38419/ this gas i buy it from a local airsoft shop like 5min away from me.
but i switched to propane since its more affordable for me. i still keep green gas in my arsenal just to kinda cleanse the guns with green gas once in a while. But using propane you need some form of silicon so it doesnt ruin your gun.
PLEASE tell me where u got that laser pointer
+Aggressive_ Studios walmart lol
why does the barrel start forming rings at the tip with usage?
Well originally these are made with threaded barrel to put on a mock suppressor, but in the US they thread on a plastic orange tip which when removed reveals the threads. hopefully that answered your question?
no thats not what i meant,i own a g18 too and i live in the uk i mean the wear on the outer barrel on mine too has like sivler rings at the end of the barrel
ooh okay i gotcha yeah thats just the metal on metal rubbing. i upgraded my outer barrel on my g18c to guarder it looks so nice and man good luck breaking that thing. the funny thing is that i originally bought it for my g17. everything fit together perfectly on the 18c
should i look into it now? i just got the gun but the ring are already forming bad at the end of the barrel. and my g19 barrel cracked at the chamber like you said. but its alot harder for me to get parts in my country i found someone on ebay that located g19 parts but its very expensive
well i just know the reputation of these parts of not being so good thats why i bought one. have you ordered from any hong kong retailers? thats where i order all my parts at this point since here in the states no US airsoft retailers that sell WE parts or upgrades.
I subbed to you hey do you do BB guns?
I used to have some but mainly just airsoft
hey guys stop making fun of him
hey can i keep it
how is white crayon filling holding up?
still on to this day i had it on that slide for like 7 months at least
thanks man
Good to see someone else who likes the glock it's just a great pistol
Where did u get the extended clip
i got that from evike.com 2-3 years ago. not too sure if they have it now, i would check out the hong kong retailers at this point ehobbasia.com and airsoftglobal.com both good companies where i order anyting glock related. just shipping is pricey but their guns are a bit cheaper because of the pricey freight. hope this helps.
you can get the we g17 gen 4 and you can get the extended clip at armypanda.com
Great vid! This mightve been the first review ive ever seen, that actually seemed to focus on relevant stuff and not some dude pretending he's handling a real firearm. Oh and about that TM-compatibility: Is that 100% applicable? I just ordered a G17 and after seing your video i was mainly concerned about finding an aluminium replacement nozzle. Apparently RA-tech doesnt produce those, so will the actual TM-nozzle fit the G17?
thanks bro i really appreciate the comment! :D and for TM-WE compatiability its gonna be a snug fit but with patience and filing of parts it can be done! i have this glock17 in the video which i coverted pretty much to a TMglock lol took a couple days but i made it work :D as for nozzle i have a spare TM guarder nozzle ready but i didnt change it yet since the WE nozzle is still pretty good and works great! and iv used this gun alot and stock nozzle still works! WE isnt all bad as people saylol just proper and extra care is required for this brand. and if your having a tough time finding parts i got EVERYTHING from Ehobbyasia.com Best site ever for parts! i recomend it hopefully this helped! :)
Max Cherepenin Yeah, true dat :D I actually have a PDW which i kinda built up for C02 usage (i live in germany and the temperature down here is waaaay below gas-capabilites) so i guess i was kinda stuck on metal parts. Anyhow, fingers crossed for the WE nozzle, and i totally agree: The newer generation WEs are actually pretty reliable but you never know, Just thinking about the older SCARs and that abomination of a buttplate (im pretty sure thats the wrong phrase, but i hope you know what im talking about, that frigging plastic plate between the receiver and the stock) gives me the shivers haha
Anyhow, keep up the good work!
Oh! Your from Germany that's awesome bro! :D but yea I do like WE a lot because of the many custom options they have. Also WE's reputation isn't the greats haha buuuuuuut... You can upgrade WE to outperform alot of higher up airsoft companies like KWA! ;D and other companies lol
Will the g series mag work in an raven eu g17
how llong did it take for it to ship
What do you use two different colour bbs?!
this was a while back i mixed my black and white .2 gram devils bbs in one container lol
where did you purchase your magazine at
evike.com
Max Cherepenin can I buy your for 70
Hey bro how do I get the white trademarks?
what laser sight is that
Are the we glocks tm compatible
Where do you order parts from
you should polish your outer barrel it'll cycle like butter
Is there any way to prevent the mag falling our many thanks
well this could be due to something broken in your mag release button have you had a chance to take it apart? also putting thin tape on each side or one side of the mag can also keep in there.
ok will have a look really appreciate it
sure thing man happy holidays!
+Max Cherepenin you to have a great Christmas
thanks! you as well!
may I ask you this gun is made in taiwan?
Where did you buy it
Where can i buy this plz leave a link
Would you recommend this gun to your viewers
definitely!
Thnx
Swit airsoft has an upgraded version for $125
Nice video keep up the good work
Should i get all black for £50?