Damaged corner bead repaired with THE DRYWALL DOCTOR First Aid Kit
HTML-код
- Опубликовано: 27 авг 2024
- look for the first aid kit at thedrywallphd.com
THE DRYWALL DOCTOR®
Is now a registered trademark owned by Ray Anderson
Please be careful when performing any actions on these videos
do them at your own risk
**Like our stuff? Here's small and big ways to show support**
SUBSCRIBE here! bit.ly/2yPbgYK
(We also love comments, "thumbs up" and shares :-)
Join our CROWD FUNDING effort on Patreon
/ thedrywalldoctor
*If you do this right (or even if you do it wrong too), please feel free to share! This is a community so your experiences only make this place a better resource for those who want to do their best drywall work!
Proverbs 22:29 NIV Do you see someone skilled in their work? They will serve before kings; they will not serve before officials of low rank.
Leave a comment below or email us at thedrywallphd@gmail.com
I’ve been pulling mud for over 20 years and I still get something out of your videos. Thank you for the tips!!!
Damaging one's own home just to show people how to fix it is awesome! I subbed and liked.
These videos will always get a like from me for the simple act of you destroying your home with a baseball bat. Thank you so much for sacrificing your time and property to show us some stuff!
This dude has some mad skills. One truly has to wonder, just how many holes he has already punched and fixed up in that house that his wife has never known about. I get the feeling if his wife were out of town for a long weekend with family, he could probably demolish huge sections of the house and have them all spotlessly repaired before she even got back.
Don’t mess with it, just leave it alone. Truer words have never been spoken. Also, put it on thin and leave it , walk away 👍
Those knives are fine for a home owner that is not slinging mud every day 👍 great job doc, that kit is awesome for all home owners. The only thing wrong with your kit is That I will be losing patch work to all the folks that learn from you and have your kit , I don’t know the cost of the kit but I’m sure it’s cheaper than the 350.00 I would charge for that repair. 🥴 WOW I just went to your web site and I can’t believe that you are basically selling all the tools and supplies at cost. Great job Doc your a true American
It’s me again Doc, I have been thinking about this video all week ? Because I do this work every day. And if a homeowner or anybody had to buy 3 knives, a bag of hot mud, a roll of level line , mesh tape, nails or screws etc that would be approximately 75 to 100 bucks? A roll of level line on Amazon is 40 bucks , and that fiber fuse tape your using is top of line and that goes from 11.00 to 14.00 a roll on Amazon. Your a real American gentleman, teaching and making this patch super cheap for anyone to do there own repairs. Should I tell your wife that I believe your losing money on your kits 😂😂, I’m sure your bride knows your heart 👍👍👍
Don’t get too tired my friend.. take it easy and while you are in Florida take vantage to enjoy the ocean good fish foods and also fishing 🎣 God bless you.
Ya had me at "Don't tell my Wife" when the mud hit the baseboard.... after taking an aluminum bat and smashing her walls.. yer killin me here LOL 👍😎✊
hahaha... I missed the beginning. Can't believe you did that to your house. Good real life damage example. Can't tell you how many corner beads I've seen that look like that. Now I know how it got that way.
Miss ur videos doc!!! U r an inspiration to me, love ur work…
Don't forget to toroughly clean the container immediately after you're done with your hot mud!
Quit messing around and get that bedroom done for your wife! ;D
You're even an ace with those plastic knives... impressed!
Enjoy your trip to Florida. Hope you will give us a video or two of your work there... with a few shots of the ocean to rub it in! :)
Just to point out a trap I myself got caught in... 4:50 Zinsser Bulls Eye 1-2-3 primer is very good primer and excellent for the galvanized steel of metal corner bead. BUT, not the spray can version. The spray can version is different in that it is not recommended on galvanized steel.
THANKS FOR ALL YOUR GOOD VIDEO. LUV TOO WATCH YOURS WITH A LOTS OF EXPERIENCE. IM A GOOD TAPERS FROM MONTRÉAL.
As always informative vid, thank you.
Nice job! Nice kit! Just what rhe doctor ordered!
Love his channel...
Just pull that whole corner bead right off and put a new one on
It's a first aid kit promotional video I don't have 12 feet of level line to replace the whole piece. The first aid kits just for patching
Im right with your comments for only one but its a demo... but i did that kind of repairs for 12 metal corner cut after water damage on first 2 feet and you save a lot of time to work like that..... open mind bro
you can just clean semi gloss paint with TSP.....it will get dust off and dull the surface for new taping mud to stick....faster than waiting 4 primer to dry, absolutley though nothing will stick to a dirty dusty surface.....that goes for anything in construction
Lol wow nice kit doc...
Another great video. Would an oscillating tool work better for cutting the bead? That way you wouldn't be prying out on it in order to cut.
Yup. I would have that sharp and overlapped
i prefer using a hack saw to remove damaged area
When the Drywall Doctor breaks out the baseball bat. 👍
If u have time could u show us how u would fix a scratch in a knife. Thanks.
Sand it out
I use green lid mud for 3 coats n then blue top mud to finish, n I still can see where my joints,,why?
Use the green lid mud just to tape then switch to the blue lid for topping and skimming.
Is the 45 minute mud plaster base like 20 minute hot mud? And does 45 minute mud sand the same as 20
Minute mud?
Yes and yes
@@THEDRYWALLDOCTOR1 thanks big daddy!
can you use fibafuse instead of the mesh tape?
Yes
Fibafuse seems to be itchier with little fiberglass fibers than the mesh tape, in my opinion. Otherwise it works fine. Be careful and don't sand it too much.
You didn’t show from closeup
It looks a bit bumpy I guess
No you can't even tell it was damaged
Where can we purchase the first aid kit? The link doesn't seem to be working :( am I too late?
No your not to late send a check or money order to THE DRYWALL DOCTOR
309 N. Prospect St Wheaton IL 60187
Make the check out to THE DRYWALL DOCTOR. $75 should cover all costs for the kit, shipping and handling costs. Please include your name and address so I know where to send it. Thanks. I think the price may double by the end of the year. But that would include shipping and handling.
Why dont you just cut it with a hacksaw ?? Or replace the hole bead ??
It's my first aid kit and it doesn't have 10' of be in it sorry
How's it going Ray? You been laying low
Yea I've been tired and not filming much heading to Florida to work on a ocean condo next week.
@@THEDRYWALLDOCTOR1 👍
Florida? Wow! "SunRay"
I can do this twice as fast and sharper than this... I'll challenge this...
Yikes don’t use tin snips 🤦🏻♂️. Use a hack saw much cleaner cut 😂