Yup, I wish EVERY instructional RUclips video was like this. Quick, to the point, no stupid 40 second intro, no bad music, no pointless drama or storytelling. This is the good stuff! Now, tell me what that knife is called and where I can get one! Thanks!
Why is every other video 5 minutes longer? This gets to the point and explains what you need to know. Awesome. Thanks for the video, my garage looks great now.
Many thanks, I’m doing this for a friend tomorrow and have never done it before. 3 minutes later and I have all the confidence in the world. Great job!
Wow - that is SO much more straightforward than the directions on the packages of cove base!! Seeing it done is worth a thousand words - ALL instructional youtube videos should be this to-the-point and well shot - some of them have good info but the video is so bad it's useless. Not this one! Thanks a million - this makes is a whole lot less intimidating to do!
I will be replacing some highly amateur wall base I installed about 10 years ago, and I only wish I had seen this tutorial before that first attempt. Thanks!
Thank you for such clear and concise instructions. I watched your video yesterday morning and then installed rubber trim for the first time in our kitchen with so many funky corners. It looks great and was so easy. Thank you!
Thank you! Widow here trying to figure stuff out for the first time. Thank you for making this easy to follow. Lesson--can't trust the adhesive that comes on these, it doesn't stick by itself 😄
Thanks for this video: informative and to-the-point. I had a new garage floor installed recently, and wanted to apply some gray cove base along two sections of drywall to give the garage a nice, finished look and keep water away from the drywall when I clean the floor. The finished product looks great. Your video helped me make short work of the job.
I gotta say this is the first how to video that got it right. This the exact way to install cove base. Some butchers use hot glue guns to get the outside corners to stay. Thats because they don’t know what the hell they are doing. Some will even make a slit on the bottom toe of the base on the outside corner to help it stay again that’s a big no no. Well done video my man keep it up. And I’m sure you’d rather work with the 120ft rolls makes for a cleaner looking job and faster also. After some time we all know how those cove base seams shrink up and gap. Well done my man. 👍👍👍👍👍
Good video. The guy who installed my cove base had some special skills. Like computers and model trains. But not cove base. So tore it off and did my self after this informative video
I just recently started doing this for a commercial contractor I’m working with. He showed me how to do it in a few minutes and I’ve been doing it ever since. I’m a drywall contractor but hey if I’m taking down walls I’m also replacing the rubber base as well now! And the contractor couldn’t be more happier.
The glue spreads more even with a base adhesive nozzle and you don't have to keep going back and forth I some time do my outside c corners one pice like u did depending on the kind of wall but more then often after time your corner is round at the top or off with your notch if u notch the top so I make two pieces and scribe one side with a vyinl tool divider, and it's a perfect corner and it's just as fast or maybe faster for some people your outside corner looks ok but I always see you tubers useing a carpet blade that's awesome cause I only use a utility knife, sheet rock knife it's easier to mark the corner and I scrape the wall and Mark it at the same time as I run my blade against the wall for my scribe line
Boom, boom, boom, you are very good and thank you. Why are there no longer professional tradesmen as you are, here in Brooklyn, NY, who we can call to do such jobs in our homes as years ago? I would call you in a heartbeat. Thank you, David.
Got my base ordered for pickup and gonna tackle this over the weekend. With this basement remodel DIY I have had to teach me self how to build walls, how to hang and mud drywall, how to run electrical and how to paint walls so they don’t look like crap. Down to the last few steps now and hoping I can get this down as well.
Just finished adding vinyl wall case to my garage for the very first time using these tips. Didn't turn out all that bad. Not as good as this but it was definitely much easier with this guide.
Don’t know if you’ve made a video on this yet but when you’re using a roll how do you properly measure to get your corner? Perfect. I may be overthinking this.
Use the right snozzel for this application. You won't have glue coming up out the top. And it's an even application so you don't have uneven glue telepathic through your rubber base.
That’s what I was thinking I’ve just got so good over the years of doing it that I know how to score of the tip of the tube for it to come out perfect and the right amount of pressure on the squeezing yeah I’ll be flying through base like it’s nothing lol took me a while to learn though it’s a lot more than people think to make it look pretty
Shane Gorombolyi thanks for checking it out! That way works well too, the only Potential downside to that is if the inside corner is jacked up you have to take a little more time to shape the factory edges to match the wonky wall
This is great of you’re in a hurry and don’t care about perfection. But if you want to do a any job, you’ll watch several videos to make a determination as to what’s important to you. Other pro’s will scribe the corner, trim each edge (basically like here, but more precisely), and hot glue that corner to keep it from puckering until the adhesive takes hold. And that’s why other videos are longer. But it’s up to you. Certainly this is good enough for many. Just my two cents.
I hope you still monitor comments/questions on your older videos. I want to install a cove base in my garage. I never noticed that the concrete is higher as it approaches the garage door and is well over 4 inches. This changes everything! How would you recommend installing that will still look nice without using cove base that is extremely tall in height?
Yup, I wish EVERY instructional RUclips video was like this. Quick, to the point, no stupid 40 second intro, no bad music, no pointless drama or storytelling. This is the good stuff! Now, tell me what that knife is called and where I can get one! Thanks!
Thought the same thing. Looks like its what is called a Roberts Carpet Tools 10-220 Cut and Jam Carpet Knife
@@cgrest thanks for naming the tool!
So we no need rollers to buy?
Totally agree. He needs to do more videos.
I am installing wall base tomorrow, thank you for this straight to the point vid...no science, just get it done.
Why is every other video 5 minutes longer? This gets to the point and explains what you need to know. Awesome. Thanks for the video, my garage looks great now.
Lol, ikr. They walk around saying follow me as they show half the house or commercial building with a shaky camera.
I think RUclips algorithms boost videos of certain lengths so that's why there is so much filler and BS in other videos.
This video is perfect though.
Here, here... what more do you need. The other vid was a bit painful.
Thank you! I wish all tutorials were done like this, simple and right to the point, good job 👍
💯
This is easily one of the best tutorials I've ever seen. Thank you!
thank you very much! I am a elder woman working to get every corner of my old house clean and livable/lovable and easy to clean. .
Totally agree with prior reviewers. Straightforward and comprehensive without waisting time. Thumbs Up!
Bro!!!! You are the MAN!!!!!! Now this is how explanation videos should be done! 🙌🏽💪🏽🤙🏽
Bro, this video is PERFECTION. I have NEVER installed wall base a day in my life, I followed your instruction and my building looks amazing!!!🔥🔥
Thanks for checking it out, glad it helped Much appreciated!!
Don't ever stop making videos let this be the norm for an instruction vid
Straight to the point. Now that's how you get her done. I appreciate you not holding back the tricks of the trade
Many thanks, I’m doing this for a friend tomorrow and have never done it before. 3 minutes later and I have all the confidence in the world. Great job!
How did it go?
Wow - that is SO much more straightforward than the directions on the packages of cove base!! Seeing it done is worth a thousand words - ALL instructional youtube videos should be this to-the-point and well shot - some of them have good info but the video is so bad it's useless. Not this one! Thanks a million - this makes is a whole lot less intimidating to do!
This is GREAT STRAIGHT TO THE POINT VIDEO!! 👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾 very informative THANK YOU!!!!!
I used this exact video to do my walls.. and it was my first time!! came out amazing THANK YOU
I will be replacing some highly amateur wall base I installed about 10 years ago, and I only wish I had seen this tutorial before that first attempt. Thanks!
Liked bc of the short video. Straight to the point
Good video, quick and to the point. I've watched it 3 times to get the finer points.
awesome video brother been a carpenter for 30+ years and need a reminder every now and then. Thanks again
Easy instructions and straight to the core. Wish all tutorial videos were as cool as yours man, thanks! 👊🏻👍🏻
Short and sweet. Thank you for a great video, loved it!
Michael! Your video is a FANTASTIC help. Thank you!
Thank you for such clear and concise instructions. I watched your video yesterday morning and then installed rubber trim for the first time in our kitchen with so many funky corners. It looks great and was so easy. Thank you!
Thank you, no bs , straight to the point!
Thank you!!
dude... this vid helped me so day-uummm much you dont even know. thanks for shooting the tips only a pro would know. you are the man, peace CEB.....
So helpful. Thank you for taking the time to share your wisdom!
Wow! To the point ,concise and chock-full of very useful information. Thank you!
Thank you! Widow here trying to figure stuff out for the first time. Thank you for making this easy to follow. Lesson--can't trust the adhesive that comes on these, it doesn't stick by itself 😄
I like the El boom boom . Very helpful... And to the point.
Excellent, fast paced and informative, Just what I needed! THANK YOU!
Thanks for this video: informative and to-the-point. I had a new garage floor installed recently, and wanted to apply some gray cove base along two sections of drywall to give the garage a nice, finished look and keep water away from the drywall when I clean the floor. The finished product looks great. Your video helped me make short work of the job.
great stuff: your speech cadence reminds me of the guy from 'gas station encounters'
Nice tutorial man, quick and to the point. Wish others would follow this format!
I gotta say this is the first how to video that got it right. This the exact way to install cove base. Some butchers use hot glue guns to get the outside corners to stay. Thats because they don’t know what the hell they are doing. Some will even make a slit on the bottom toe of the base on the outside corner to help it stay again that’s a big no no. Well done video my man keep it up. And I’m sure you’d rather work with the 120ft rolls makes for a cleaner looking job and faster also. After some time we all know how those cove base seams shrink up and gap. Well done my man. 👍👍👍👍👍
Everything I needed to know. Inside corners and outside corners. Straights I can figure out on my own. Excellent bideo
Amazing how the best help videos just get right to the point a show the work. Also like the let's do it twice to really detail the technique.
Great video! Straight to the point; absolutely wonderful! Thank you!
Dude. Thank you so much. Love the channel wish you the best. Awesome videos man.
Good video. The guy who installed my cove base had some special skills. Like computers and model trains. But not cove base. So tore it off and did my self after this informative video
I just recently started doing this for a commercial contractor I’m working with.
He showed me how to do it in a few minutes and I’ve been doing it ever since.
I’m a drywall contractor but hey if I’m taking down walls I’m also replacing the rubber base as well now! And the contractor couldn’t be more happier.
The glue spreads more even with a base adhesive nozzle and you don't have to keep going back and forth I some time do my outside c corners one pice like u did depending on the kind of wall but more then often after time your corner is round at the top or off with your notch if u notch the top so I make two pieces and scribe one side with a vyinl tool divider, and it's a perfect corner and it's just as fast or maybe faster for some people your outside corner looks ok but I always see you tubers useing a carpet blade that's awesome cause I only use a utility knife, sheet rock knife it's easier to mark the corner and I scrape the wall and Mark it at the same time as I run my blade against the wall for my scribe line
Thanks for being so quick and too the point! I'm handy enough but never used this stuff. Answered the two questions I had right off the hop. Thanks!
Thank you. Very articulate and concise.
This is a great explanation. Well done. Thanks
Great Job! Simple & direct. I appreciate the short video. Thanks
Thank you,my dude. Right to it, clear and concise. 🙌
Boom, boom, boom, you are very good and thank you. Why are there no longer professional tradesmen as you are, here in Brooklyn, NY, who we can call to do such jobs in our homes as years ago? I would call you in a heartbeat. Thank you, David.
Wow dude! You are the bomb. This is the last part that I have to finish in my bathroom and you made it so easy. Thank you for your expertise!
Great job. Clear, concise and straight to the point.
Well done, no BS straight to the point.
Got my base ordered for pickup and gonna tackle this over the weekend. With this basement remodel DIY I have had to teach me self how to build walls, how to hang and mud drywall, how to run electrical and how to paint walls so they don’t look like crap. Down to the last few steps now and hoping I can get this down as well.
Thank you very much I tried your methods today and worked great!!
huge thanks! you explained perfectly and made it look simple
Excellent video! You make me feel like I could do it!👍😊⭐️
Thanks for the info man!!! 👍🏼👍🏼
Super video Was a lot of help got the cove installed perfectly subscribed
I have to do 30 to 40 units of this crap 🤬 I’m a flooring installer but wasn’t too sure how to do corners. This video was helpful. Thanks!
Thank you for the easy how to video. This makes it very simple to make those cuts. Fortunately we only have inside corner cuts.
Awesome! Just what I was looking for! Thanks....
Get yourself a 3" base tip from literally any flooring store. you've got a boat load more adhesive then necessary.
Best video on the subject. Thanks
that little slice at the top of the outside corner would bug the hell out of me but other than that, flawless.
Really good video - right to the point. What adhesive would you recommend?
Thank you for this great video! Can I use this vinyl wall base for tile floor?
Thank you for your tutorial. 👍🏼You also did a great job on your video. Thanks again.
Thanks for checking it out!!
Excellent tutorial. !
Just finished adding vinyl wall case to my garage for the very first time using these tips. Didn't turn out all that bad. Not as good as this but it was definitely much easier with this guide.
hi excellent video thank you, for a bathroom would you caulk under the lip part that sits on floor to stop water from getting behind or under wall?
I love the look of this. Might replace my existing molding with it
Thanks for this! Just did it last night and worked great.
Don’t know if you’ve made a video on this yet but when you’re using a roll how do you properly measure to get your corner? Perfect. I may be overthinking this.
Great video! Great tips. Thank you!
Great job explaining this, thank you sir.
Amazing tutorial. Thank you sooooo much.
Very good and clear explanation. Thank you.
Use the right snozzel for this application. You won't have glue coming up out the top.
And it's an even application so you don't have uneven glue telepathic through your rubber base.
That’s what I was thinking I’ve just got so good over the years of doing it that I know how to score of the tip of the tube for it to come out perfect and the right amount of pressure on the squeezing yeah I’ll be flying through base like it’s nothing lol took me a while to learn though it’s a lot more than people think to make it look pretty
This video was a game changer
Thank you
Thanks Mike outside corners give me a headache you make it look easy
mat lane thank you! Hopefully this strategy helps a little on the next one
They are easy to make especially if you use the right knife
Awesome quick to the point thank you sir
Very informative and to the point. Thank you!
Thank you, quick and to the point!
Nice ive never seen inside corners done that way, the dudes that taught me would just butt them tight after 45-ing the other peices bottom corner
Shane Gorombolyi thanks for checking it out! That way works well too, the only Potential downside to that is if the inside corner is jacked up you have to take a little more time to shape the factory edges to match the wonky wall
Thank so much I was almost there just didn't shave the corners off alittle
Please can you share what that hand tool is that youre using? its awesome!
thanks man this really would have been a nightmare without your help
This is great of you’re in a hurry and don’t care about perfection. But if you want to do a any job, you’ll watch several videos to make a determination as to what’s important to you. Other pro’s will scribe the corner, trim each edge (basically like here, but more precisely), and hot glue that corner to keep it from puckering until the adhesive takes hold. And that’s why other videos are longer. But it’s up to you. Certainly this is good enough for many. Just my two cents.
Perfect video. Thanks.
F'n awesome bro... Thanks for the tips.
Very informative and funny but how, and what paint do i use to paint my existing moldings??
Thank you! Do you think I can use this for our garage too?
Absolutely!!
I love how I’m sitting here on someone’s job watching this dude because I have no idea what I’m doing
I hope you still monitor comments/questions on your older videos. I want to install a cove base in my garage. I never noticed that the concrete is higher as it approaches the garage door and is well over 4 inches. This changes everything! How would you recommend installing that will still look nice without using cove base that is extremely tall in height?
great job very to the point,such a relief
Thx Dude that was quite impressive!
Great video, short and sweet. Too bad I installed some vinyl cove base THEN watched this. Grrr. Oh well, the rest of the job will look good!
Nice. Very helpful, thank you
What’s going to happen to the wall when you need to take that trim off to change out the flooring?😊 Does it pull off clean?
OUTSTANDING! Thank you. VERY much appreciated.
I like your style!
Dustin Strzesak thanks for connecting and the feedback! Much appreciated!
Are you in the carpet/ flooring game?
You save the night bro straight to the point I love it sub and like kepp it straight to the point TRUST ME PEOPLE LOVE IT NOT JUST ME