A tip for the tyvek because I hate working with that sound. I take cheap spring clamps and clamp a few the lower edge so that it keeps it from blowing up. Easy way the weight it down. Love the vids.
Thank you for your commitment to excellence and showing your tricks and tips. I really appreciate the time and trouble you go through to make these videos.
The Crazy Fixer ;-) It's always a pleasure to watch your videos as you are quite professional, skilled and put much care about what you do. Great respect for people like you. Thumbs up is not an option. It's compulsory :-))) Greetings from Italy
Marco Tassiano con tutti quei alberi abbattuti in Trentino è l'abilità di questo esperto si potrebbero risolvere i problemi dei terremotati in una stagione.
I feel better with those beams than the last two houses where you propped the floor joist on 2×4 then built the floor out on that. I know either way works.
So glad that you are back TCF, I was getting worried about you. Your videos are brilliant and one of the best sites on line. Stay safe when you get higher on this series.
Palaside to the rescue! Is that the same work horse that you used for the last build? It took a hell of a beating! At least it's a bit warmer on this one!but we have some crappy weather coming this way! Stay safe! You might have half of the home built before those guys come cut those pockets! You might have to do that too!
No shit, rt?... I hope they were fired real quick for screwing that up, and /or the engineer if these were the actual specs and no one bothered to do basic math... it's like this all the time tho, looks good on paper, then when you tell them it is physically impossible to do it that way, the framers are left to figure it out...
@@Engineer9736 out of context... He is just "wrong on size" he mentioned previously. He did not mention ordering wrong supplies. Don't be so "fake news" fact is fact... Who ordered wrong size? In structural construction there is big difference between 9" or 12" beams and might not passtructural inspection.
@@olegk11 you should see the painters try to explain why vaulted ceilings and corners fail. And that if they want the drywall fixed they might catch the crew headed south down the ole broken trail. btw the trail was last referenced in Young Guns for those that dont know.
Your one hell of a framer props man who taught you and how long have u been framing? Ive been framing for a little under 2 yrs now and i hope to have my own company in the future great job thoe man
@@dubloduce I agree with you, that looks like a Stiletto. Probably the model "TB15MC TiBone 15-Ounce Titanium Milled-Face Hammer". You can make up your own mind checking the link below: www.amazon.ca/Stiletto-TB15MC-15-Ounce-Titanium-Milled-Face/dp/B00079R1YM
This reminds me that he has a video where he talks about his tools, and on the video description he put a link for each tool. My tool belt tour (Starting where he talks about his hammer) ruclips.net/video/8Jr43ps1KQM/видео.html Stiletto TB15SC TiBone 15-Ounce Titanium Smooth Face Hammer (Curved Handle) amzn.to/2DdV9HM
The reason for plywood on sill yes it’s not pressure treated but it’s a fire block so technically it can’t be pressure treated someone was actually thinking ahead for once
Hey crazy....u don't need to worry about dewalt .they only want people to buy but when it comes to pay or sponsor good workers there's always excuses .... But like i said before u drink ur beers with ur sweet and work !!!!!!? So drink more. Whoop,, whoop
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
"The Crazy Framer" the best and most exciting DIY/Home Renovation/Construction show not on TV
Never thought about making things so the inspector can see what you did. Great idea.
In the south code is adhesive, nails and carriage bolts
I'm surprised theres no liquid nail or something when doing those 3 and 2 ply beams...
I'm force into bed for a couple of days and these series just cheer me up. Great service.
Another excellent day with Crazy! With a new tape, too! 😁
Your tips for getting things done by yourself are genius! If you have came up with these on your own hats off!
From framer to framer. Good job man. Keep it up. I know it's not easy working on your own! Stay safe!
Look at that new shiny tape measure
Lots of forethought with experience driven techniques makes for a job well done.
The precision of your measurements is remarkable! I’m glad you’re back! #TCF
A tip for the tyvek because I hate working with that sound. I take cheap spring clamps and clamp a few the lower edge so that it keeps it from blowing up. Easy way the weight it down. Love the vids.
Nice beam trick!
I like those specific and technical details and helps
Thank you for your commitment to excellence and showing your tricks and tips. I really appreciate the time and trouble you go through to make these videos.
The Crazy Fixer ;-)
It's always a pleasure to watch your videos as you are quite professional, skilled and put much care about what you do.
Great respect for people like you.
Thumbs up is not an option. It's compulsory :-)))
Greetings from Italy
Marco Tassiano con tutti quei alberi abbattuti in Trentino è l'abilità di questo esperto si potrebbero risolvere i problemi dei terremotati in una stagione.
Giovanni Fiorentino Idea buonissima ma, in quanto tale, da noi non fattibile, causa inettutidine di coloro che governano.
My favorite part of the day is watching your videos, awesome job
very good... those beams are seriously heavy
Hi Crazy, another enjoyable episode you make everything look so easy in your execution of work.
very glad to see u back in action ! keep up the good work ! All the best from Romania !!!
Salut
I have learned a lot watching you. Love your videos!
Love the videos love learning from you !!! ❤️ U 🙋♀️
Love your videos crazy ass ! Your neighbor from Michigan
Beam trick is quite good thanks for sharing
Another New Project, Teaching 101 ‼️👍👍 Vinny 🇺🇸
Thanks for making my day. Have a great evening relaxing.
Time for a beer, love it!
I feel better with those beams than the last two houses where you propped the floor joist on 2×4 then built the floor out on that. I know either way works.
So glad that you are back TCF, I was getting worried about you. Your videos are brilliant and one of the best sites on line. Stay safe when you get higher on this series.
Looking great my friend
The contrast in weather from season 2 is kind of funny.
I thumbs up before the video also, excited for the new build, thanks
Awesome video! Thanks for explaining the details.
Palaside to the rescue! Is that the same work horse that you used for the last build? It took a hell of a beating! At least it's a bit warmer on this one!but we have some crappy weather coming this way! Stay safe! You might have half of the home built before those guys come cut those pockets! You might have to do that too!
Without 5 layers of clothes, you’re a lot skinnier
Wrought iron , cock , and ribs !! Thats what he is made of !!
i guess it is kind of randomly asking but does anyone know of a good website to watch newly released series online ?
Keep it coming your a great framer
Who ordered wrong size beams?
Who made wrong size concrete pockets?
It's ok..CrazyFramer will fix all
No shit, rt?... I hope they were fired real quick for screwing that up, and /or the engineer if these were the actual specs and no one bothered to do basic math... it's like this all the time tho, looks good on paper, then when you tell them it is physically impossible to do it that way, the framers are left to figure it out...
@@danielguy2156 the worst end of the stick goes to drywall team. Sometimes framers wrong too.
6:46 He says literally that he was wrong himself on the beam size. So the only mistake is the concrete. Don’t be so drama queen.
@@Engineer9736 out of context... He is just "wrong on size" he mentioned previously. He did not mention ordering wrong supplies.
Don't be so "fake news" fact is fact... Who ordered wrong size?
In structural construction there is big difference between 9" or 12" beams and might not passtructural inspection.
@@olegk11 you should see the painters try to explain why vaulted ceilings and corners fail. And that if they want the drywall fixed they might catch the crew headed south down the ole broken trail. btw the trail was last referenced in Young Guns for those that dont know.
Good working 👍👍👍👍
Best series
Good to see another house
good idea, the beam Solo trick
The ol paslode pulling its weight. What a beast. Just like you crazy! 😏💪
thanks for your videos
Your one hell of a framer props man who taught you and how long have u been framing? Ive been framing for a little under 2 yrs now and i hope to have my own company in the future great job thoe man
man, you're excellent
I wish I could like these vids more than once..
The trick how to put in the beam alone - 👍
I'm building a hotel and watching you on lunch break.
Lol building.
I appreciate all the knowledge and tips you share with us brotha. Thank you, keep the videos coming please.
I thought we'll see the hitachi nail gun on this series.
However the dewalt should be good in this weather right?
I love how you still feel the need to prove you aren't being sponsored by DeWalt. 😂
Using the force now.
here we go... eatin dinner and catching up
Got to admit... I flinched a little at 10:15
Hey mate, what brand hammer is that you use?
Cheers
It looks like a Stiletto
@@dubloduce I agree with you, that looks like a Stiletto. Probably the model "TB15MC TiBone 15-Ounce Titanium Milled-Face Hammer".
You can make up your own mind checking the link below:
www.amazon.ca/Stiletto-TB15MC-15-Ounce-Titanium-Milled-Face/dp/B00079R1YM
This reminds me that he has a video where he talks about his tools, and on the video description he put a link for each tool.
My tool belt tour (Starting where he talks about his hammer)
ruclips.net/video/8Jr43ps1KQM/видео.html
Stiletto TB15SC TiBone 15-Ounce Titanium Smooth Face Hammer (Curved Handle)
amzn.to/2DdV9HM
@@JMartin2006 much appreciated
popping those bands will definitely make you dance
You can work alone on a construction site in Ontario without any problems???
Thanks . What happened to your pneumatic framing nail gun?
How come you didn't put any glue on any of the beams mr. Holmes would do it like that and he's a good contractor in Canada
Crazy worker= cool.
What work boots do you wear I just ordered a pair of thorogoods 8" moc toe what are your thoughts on these
He wears DC skate shoes.
Christopher Dobbin I got those boots on now. There the best boot I have ever had
@@hammertime7349 they are, I have one lace up pair, fit when I did scaffolding. Three pull up one, summer and winter pairs
@@hammertime7349 did you guys find the boot slightly tight on the width when you first got them do they stretch out
The neighbourhood reminds me of Bonnie Doon.
3" shim? Sounds like on my projects.
You don't glue up the beam and nail or screw?
Not necessary, just nails are pretty much the standard for lumber headers.
wow this is so close to where i live
that tyvek house wrap is the worst paper to use. doesnt breath and holds water.
Crazy framer is it possible you could make the videos little longer?
Fresh tape!
aint that a nice spring day
Machine!!!
Andrew Barker work animal!!!!
two days to get a beam in ?????????????????????
Paslode way to go.
The reason for plywood on sill yes it’s not pressure treated but it’s a fire block so technically it can’t be pressure treated someone was actually thinking ahead for once
Can I have a beer now?
How long have you had your Stiletto?
Where is Canada do you work?
Someone should hook this dude up with a nice tool belt.
Did you buy 2 tapes and throw 1 on the dashboard?
The forearms of a god
It's okay Mr. Engineer I'll fix your mistakes, I'm a carpenter!!!
Can anyone remember the video he has where he talks about removing wall braces?
You're supposed to start with "it's time for a beer"... Not end with it.
That answers that question. The dewalt is still left in the truck.
So why build solo? don't like working with people or just for the videos?
Both
If you don't give this dudes videos a thumbs up you've never worked hard in your life
Make sure you dont skip those adds 👌
Aloha always nice to see you back start framing
@1:58 i thought you fell
👍👍🥑🥑
Bitchin idea to set those beams!
Hey crazy....u don't need to worry about dewalt .they only want people to buy but when it comes to pay or sponsor good workers there's always excuses .... But like i said before u drink ur beers with ur sweet and work !!!!!!? So drink more. Whoop,, whoop
Best part of my day!! Except can you shoot a nail in the direction of that barking dog please.
Josh Dirkson *hears wimpering right after and barking stops*
Best construction based RUclips channel out there awesome man ur tha tits
Why not get a crew and smash up some monsters
Keep it small, keep it all
True
At least it’s not a steal beam
Why do you frame alone. I've built with 1 guy before and damn near killed us.
It’s pretty clear he looks comfortable framing by himself so no point of him paying a second guy unless he wanted to speed up the job
Must be nice not having to wear 5 hoodies.
Must be nice now to not be freezing your ass off or have your POS tools not freezing up on you.
Just my opinion. Duct Tape down the tyvek for the neighborhood.
!;-)
Awww, WELL LOOK @ Uuuu 👈🏼
WITH UR PRETTY PINK 👈🏼 PENCIL ✍🏼 .....
😁 Snickering ......
( KNUCKLE👊🏽BUMP ) The Crazy Framer....
First!