had the same problem with 1214 tried everything from check the box for simulation , to update the plc sim (this last one cause the plc sim to dont open anymore) , and the problem was the plcsim ver, suggest to download the plc sim current ver from the page of siemens
To run the simulation, you have to go to the menu and click on start simulation. Your problem is not the simulation, is the Device. I have the same problem with my device which is not accepting the IP address change.
For everybody which have this problem: The problem is because of an incompatibilty between the simulator and the choosen PLC. Try to choose a PLC 1500 1511-1 PN and choose also in the Simulator a PLC 1500.
It happened with me and i lost some few hours to understand. So the solution is simple you must use the last version of de firmware. Try use S7 1200 CPU1214 DC/DC/DC V4.4
I had this problem too and acoording to comments when I did it worked my case too. You should change select version higher 4.0 . Consequently your program required 4.0 later to work well. Have a nice work.
an interface is not available for an online connection to the configured access node......sir would please help me to solve this prblm even i have set the pc/pg interface though it is not working
I read that TIA portal wont work on windows 10 with PLC Sim unless its updated to SP1. I have the same problem, except I cant even open the "Extended Download to Device" window, it skips straight to Load, which proceeds to give me those same errors. Trying the SP1 and seeing if that fixes it.
Firstly, My os is Wİndows 8.1. I have Tia Portal V14 SP1 version and using PLC Sim's virtual plc. And I don't prefer executing PLCSim program by directly clicking shortcut, instead, just click the "start simulation" symbol on the Tia Portal. I had some issues regarding to PLCSim. After some steps I solved the issue that about plcsim configuring and downloading. The error wasn't exact same error (aborted error) but it was some other error like synchronization and configuration problems. 1. I introduced Tia Portal and PLCSim exe files to my virus programme as secure application (if you use windows security wall you can do the same thing also). 2. Using Tia Portal shortcut file, I reached target directory. On there, after Shift+Right Click combination, clicked "open command window here" tab. Copied the exe file name (Siemens.Automation.Portal) paste it on window and run it. That's all . After it open, you can close the command window and start using Tia Portal. Not sure that which step is the effective one . I hope it would be helpful to someone.
Sir, i update PLCSIM V14 SP1. But now,when i m trying to simulator it says 'You can simulate cpu of s7 1200 series with firmware version 4.0 or higher ". How can i solve this?
Hello pete i experienced that alot in my tia portal v13 if tia portal v13 sp1. i only installed what is in the package of sp1. if i download something that is not part in sp1. my plcsim always in error. i think whats in the package of version u stick to that.
Hello Sir, To my knoweldge PLCSIM V14 works with only those CPU that have a firmware version of 4.0 or greater. You can try with any with firmware of >= 4.0. Hope this will solve the problem. But I'm stuck with PLCSIM V13. Can you help me on that. How to simulate in V13 of PLCSIM.
i am having the same issue, but when Start the PLCSIM software, i compile adn the run the simulator through the ICON given in TIA Portal, and then it goes online and everything works fine. I dunno the science behind it tho. Well guess this Comment is lil too late for ya.
hello, I have one question When I run the simulation, I click load after the search is finished. I am getting "the selected online target could not be reached" error.Please, ı have project can u help me ?? But ı have uninterrupted internet and I am wired not wifi
I had this problem. I found the solution in the Siemens forum. "The most likely cause of this error is an incorrect firmware version. PLCSIM supports simulation of the S7-1200 firmware version V4.0 and later. If the CPU in your project is an older firmware version, then attempting to download this to PLCSIM will result in the described error. " I changed the firmware version and it works!
In the top menu click online and then simulate -> start. I had the same issue two weeks ago, make sure the plc sim and step 7 is up to date, once I installed all the updates it worked.
I got it working by updating the software, but if you are using a crack version... not sure what happens when you attempt to update. Here is the next video: ruclips.net/video/0hv6Fn31Zks/видео.html
@@PeteVree hi i have TIA v14 and windows10. I have the same problem. i trying to update the software there is an error of (unable to connect to the server)?
Solved the problem : support.industry.siemens.com/tf//ww/en/posts/error-downloading-to-plcsim-v13/178147/?page=0&pageSize=10, by a re-compile. Right Click on CPU_name, go to "Compile", Hardware (Rebuild All) and then Software (Rebuild All). And problem gets resolved.
siemens=10 days to connect pc with plc////////////OMRON =first hour connect PC-PLC, run ladder control PLC-Inverter,they dont charger for upgrade and easy and stronger then siemens.....i spent money with siemens and its not worthy it.....
it all depends on where you live and market share. Allen Bradley owns most of the market in North America, Siemens owns Europe, Omron & Mitsubishi are prevalent in Asia. If a $1200 trainer gets you a $70K job... it's worth it.
Go to project properties (above "Add new device")> Protection: and switch on "Support simulation during block compilation"
thanks, your comment saved me a lot of time
Thank you !!!!
thanx broo
I did but don't work... any other solution?
It doesn’t work
Got 'er going after a few hours of updates. I'll try to post tomorrow with an update. =)
Based on the comments below, there is no issue with V15.
im having the same problem can you please share how did you fix it
hey i have the same issue, can you share how you solve it?
hello did you have the answer for this, pls help
Full Siemens TIA Portal PLC Programming Course available here: petevree.thinkific.com/courses/siemens-tia-portal-plc-programming
The issue is the difference between CPU Tian Portal and PLC_SIM. You have to choose the same PLC. It will work fine. For is ok.
had the same problem with 1214 tried everything from check the box for simulation , to update the plc sim (this last one cause the plc sim to dont open anymore) , and the problem was the plcsim ver, suggest to download the plc sim current ver from the page of siemens
I have TİA Portal V15.1 I couldn't connect from device to plcsim thanks to you I got it :)
To run the simulation, you have to go to the menu and click on start simulation. Your problem is not the simulation, is the Device. I have the same problem with my device which is not accepting the IP address change.
I had the same issue and changed device just now, it is running, thank you.
I had the same problem, thank you so much for the help :)
For everybody which have this problem: The problem is because of an incompatibilty between the simulator and the choosen PLC. Try to choose a PLC 1500 1511-1 PN and choose also in the Simulator a PLC 1500.
Hi Guys, just for notice IP of the simulated CPU and PG should never be the same!!
What do you have to do is: go to the window of DIVICE > PLC (plc dc/dc ) > comile> software> rebuildy all.
It happened with me and i lost some few hours to understand. So the solution is simple you must use the last version of de firmware. Try use S7 1200 CPU1214 DC/DC/DC V4.4
I had this problem too and acoording to comments when I did it worked my case too. You should change select version higher 4.0 . Consequently your program required 4.0 later to work well. Have a nice work.
Click on "start simulation" icon =>select check box on pop-up =>OK then try to download
THANKS!!!!, YOU JUST SAVE MY SEMESTER
an interface is not available for an online connection to the configured access node......sir would please help me to solve this prblm even i have set the pc/pg interface though it is not working
I read that TIA portal wont work on windows 10 with PLC Sim unless its updated to SP1. I have the same problem, except I cant even open the "Extended Download to Device" window, it skips straight to Load, which proceeds to give me those same errors. Trying the SP1 and seeing if that fixes it.
ewan matheson do u know how to update to sp1?
i am having the same issue, but i am working with CPU S7-1500, not PLC Sim, show what should i do now to fix this problem? Thanks You
Firstly, My os is Wİndows 8.1. I have Tia Portal V14 SP1 version and using PLC Sim's virtual plc. And I don't prefer executing PLCSim program by directly clicking shortcut, instead, just click the "start simulation" symbol on the Tia Portal.
I had some issues regarding to PLCSim. After some steps I solved the issue that about plcsim configuring and downloading. The error wasn't exact same error (aborted error) but it was some other error like synchronization and configuration problems.
1. I introduced Tia Portal and PLCSim exe files to my virus programme as secure application (if you use windows security wall you can do the same thing also).
2. Using Tia Portal shortcut file, I reached target directory. On there, after Shift+Right Click combination, clicked "open command window here" tab. Copied the exe file name (Siemens.Automation.Portal) paste it on window and run it. That's all . After it open, you can close the command window and start using Tia Portal.
Not sure that which step is the effective one . I hope it would be helpful to someone.
When I am trying to start plc sim 14, it is showing error ' the computer must be restart before using s7 plc sim' .
What can I do??
That is a bug for tia v14 . please turn off the plcsim and start the plcsim again in the menu bar and there you go .
I had done all that and it doesn’t work .. please give explanations if you can do it
type of the pg/pc interface is teleservice What is the cause?
don't change the plc address and start the simulation directely without the download button.
Thank You
Sir, i update PLCSIM V14 SP1. But now,when i m trying to simulator it says 'You can simulate cpu of s7 1200 series with firmware version 4.0 or higher ". How can i solve this?
Does Hegamurl's video provide any insight? ruclips.net/video/N2wXhAKSupo/видео.html
Hello,
I have everything upto date but download to thr device still not working
even when i enabled library blocks support in the project properties
try to start s7plcsim program with administrator rights
Hello pete i experienced that alot in my tia portal v13 if tia portal v13 sp1. i only installed what is in the package of sp1. if i download something that is not part in sp1. my plcsim always in error. i think whats in the package of version u stick to that.
Hello Sir,
To my knoweldge PLCSIM V14 works with only those CPU that have a firmware version of 4.0 or greater. You can try with any with firmware of >= 4.0. Hope this will solve the problem. But I'm stuck with PLCSIM V13. Can you help me on that. How to simulate in V13 of PLCSIM.
Mr Jubaer...did u get the solution of problem u r facing on V13?
I select CPU which version is greater than 4 but didn’t work
em gặp lỗi: " error while loading loading has been aborted" khi load chương trình xuống mong anh giúp đỡ
i am having the same issue, but when Start the PLCSIM software, i compile adn the run the simulator through the ICON given in TIA Portal, and then it goes online and everything works fine.
I dunno the science behind it tho. Well guess this Comment is lil too late for ya.
hello, I have one question
When I run the simulation, I click load after the search is finished. I am getting "the selected online target could not be reached" error.Please, ı have project can u help me ?? But ı have uninterrupted internet and I am wired not wifi
try to start s7plcsim program with administrator rights
Sir my HMI is KTP 600 BASIC DP and its stuck in bootloader ,please help me how to fix it
Faced same Issue just updated CPU from the add devices list from v2 to V4 and its working everything fine without do any other change
Firmware issue.
Rt chick cup-change device-change firmware
I have win 8.1 , you are right it seems that v14 have a problem , but when I installed the v14sp1 it worked fine, thanks again to propose this issue
I had this problem. I found the solution in the Siemens forum.
"The most likely cause of this error is an incorrect firmware version. PLCSIM supports simulation of the S7-1200 firmware version V4.0 and later. If the CPU in your project is an older firmware version, then attempting to download this to PLCSIM will result in the described error. "
I changed the firmware version and it works!
i had the same problem. But it's with the S7-1500. Can you help me how to solve it?
How to change the firmware of PLc s 1200 in V13?
I alr change it to the higher than V4.0 but it doesn’t work
Yes...now its working
Just chose a processor which has having V4.0 or above when selecting CPU.
you have to create a project at PLC Sim too
The same problem exactly, thank you for vedio , I wish I have seen it before
Hello problem is firmware 1200 CPU , You must install firmware 4.0
hi
it's working with me , but with TIA PORTAL V15
Hardware is required for simulation?
No. Although there may be certain limitations with the PLC Sim vs. using actual hardware
Hi Pete
I got the same problem
how did you solve yours?
go to the help menu, installed software, and update your tia portal... should work after that
Set pg in control panel to plcsim
When I get back I can send you images of you want
In the top menu click online and then simulate -> start. I had the same issue two weeks ago, make sure the plc sim and step 7 is up to date, once I installed all the updates it worked.
Thank you. After updating everything worked great.
my problem, when run progam , logic "normaly open" , i change to modify 1 (ON), but not work.., can you help me..
I face same problem. Is it create any problem when update because i use crack version?
I got it working by updating the software, but if you are using a crack version... not sure what happens when you attempt to update. Here is the next video: ruclips.net/video/0hv6Fn31Zks/видео.html
have the same problem. did you finally solve your problem ?
I updated the TIA software and everything worked fine.
@@PeteVree hi i have TIA v14 and windows10. I have the same problem. i trying to update the software there is an error of (unable to connect to the server)?
@@Learning_Oasis26 same :/
Using the Simulation option works very well even if you have loading issues with PLCSIM V14
you should also want to see the set pg pc interface.
hi ı have the same problem how can ı solve it?
try to start s7plcsim program with administrator rights
Try clicking simulate directly from TIA portal instead of launching PLCSIM manually.
Ok. I'll give it a try. Thanks
The stimulation symbol is not selectable
Hey bro i hav e same problem how u handle it
try to start s7plcsim program with administrator rights
Just go to your doccuments delete the Siemens directory and restart the simulator it should work...
I'll keep this in mind if it happens again.
I have the same problem. Somebody send some solution in details please
try to start s7plcsim program with administrator rights
thx for the video,it really help.
I have some back up program in plc.. Having same problem. How can i keep the same programme and Access plc sim
Thank you, it worked for me.
How about trying V15
Many thanks 🎉😢❤😊 4:53
Solved the problem
: support.industry.siemens.com/tf//ww/en/posts/error-downloading-to-plcsim-v13/178147/?page=0&pageSize=10,
by a re-compile.
Right Click on CPU_name, go to "Compile", Hardware (Rebuild All) and then Software (Rebuild All).
And problem gets resolved.
Thankkkkkksssssss alottttt!
Many thanks 🎉😢❤😊
I am using V14 without SP1 and is working well
but not for communication between many interfaces
i need plcsim v14,pls give me.
THANKS A TON
Thanks you so much
Como arreglaste tu problema? Saludos de Peru
Tuve que actualizar el software TIA ... funcionó bien después de eso.
ruclips.net/video/0hv6Fn31Zks/видео.html
change the version
I also got this problem, so now I can work anything with simulation
Ty it work for me
Thanks
siemens=10 days to connect pc with plc////////////OMRON =first hour connect PC-PLC, run ladder control PLC-Inverter,they dont charger for upgrade and easy and stronger then siemens.....i spent money with siemens and its not worthy it.....
it all depends on where you live and market share. Allen Bradley owns most of the market in North America, Siemens owns Europe, Omron & Mitsubishi are prevalent in Asia. If a $1200 trainer gets you a $70K job... it's worth it.
LIkE
thanks