remove sportster primary cover

Поделиться
HTML-код
  • Опубликовано: 27 авг 2024

Комментарии • 34

  • @kristinemadley681
    @kristinemadley681 Месяц назад

    Thanks for making video and listing tools, I'm having trouble replacing my chain tensioner on my 01 sporty

  • @Kaptain13Gonzo
    @Kaptain13Gonzo 2 года назад

    My starter just died. Very informative. Have to watch again. Maybe I can do this myself. Need a bike lift and a couple bits and pieces, plus a new starter.

  • @jeffbriggs4268
    @jeffbriggs4268 11 месяцев назад

    I observed several good tips in this video! Thanks!!!

  • @dicksongil391
    @dicksongil391 3 года назад +1

    Thank You so much for making my life easier. Short and to the point!

  • @serviceproper
    @serviceproper 3 года назад +8

    Why didn’t you remove the handlebars, front wheel and rear taillight too? Lol, you removed a bunch of shit that was unnecessary.

  • @oheyjay1677
    @oheyjay1677 4 года назад +1

    Hey so I’m struggling to put the primary cover the top part seems to be flush but the bottom doesn’t. Even when I’m putting the bolts back it still doesn’t seem to be flush. What might be the problem ?

    • @tomgarrett687
      @tomgarrett687 4 года назад

      The primary chain adjuster is in the way. Maybe push up on it with a small screwdriver then push cover in...

  • @towelie4625
    @towelie4625 2 года назад +1

    I'm here cause I dropped an Alan key in my inspection cover while checking my chain tension....

  • @MINECRAFT123257
    @MINECRAFT123257 2 года назад

    Thank you so much!

  • @renerodriguez6300
    @renerodriguez6300 3 года назад

    Does it matter where u put the primary screws back in? I'ma replace em w the chromes anyways

    • @bleugate
      @bleugate 2 года назад +1

      Absolutely Yes. You don’t want to crack anything.

    • @renerodriguez6300
      @renerodriguez6300 2 года назад

      @@bleugate thanks bit the bike wasn't rebuild anymore but thanks for reply 👍

  • @pampa696
    @pampa696 5 лет назад +1

    Nice work Dude, thanks for share this

  • @terryedge3423
    @terryedge3423 Год назад

    Thank you Sir Gteat video but could use some music Even without its great again thank you !

  • @bobnolen7611
    @bobnolen7611 2 года назад

    Most camera’s & phone camera’s have audio today. Please upgrade!

  • @marvelharris9540
    @marvelharris9540 6 лет назад

    Did you have to disconnect the clutch assembly on the handle bar?

    • @valleyrider8620
      @valleyrider8620  5 лет назад

      yes about 30 seconds into the vid

    • @sammy60164
      @sammy60164 5 лет назад

      I think he had the same question as me, but I think he (and I) was asking, do you HAVE to remove it, or can you just leave the cable attached and remove the whole cover with it

    • @tomgarrett687
      @tomgarrett687 4 года назад +1

      You can loosen the cable and leave it attached to the cover, but remove the adjuster under the derby cover..

  • @Ramonmendez56
    @Ramonmendez56 4 года назад +1

    at 3:04 how would you be able to place it in 5th without the shifter ?

  • @familiahuapeleon2937
    @familiahuapeleon2937 6 лет назад

    Hi have question is same cover 04 or 05 need replace both cover for Chrome but myself try replace thanks

  • @davidbrooks4285
    @davidbrooks4285 11 месяцев назад

    All that just to remove the crank case? Screw that I’ll pay Harley to do it

  • @richardvega9720
    @richardvega9720 5 лет назад

    Why did you remove the cover was the gasket leaking?

    • @valleyrider8620
      @valleyrider8620  5 лет назад

      no my battery wouldn't hold a charge anymore because the stator wasn't working anymore. I upgraded the clutch pack and replaced the regulator since I was there. My heads are leaking but I've been putting off the new gaskets for years now. Some year I'll be having a good time replacing the gaskets and some of the oil lines that leak all over.

    • @richardvega9720
      @richardvega9720 5 лет назад

      I recently bought my nightster and there was a major oil leak, I noticed the drain hose coming from the oil tank had a cut so I replaced it and that stopped most of it, the primary drain plug is not leaking or the derby cover, the primary gaskets seems ok, is there anything else I should look at for a leak,its minimal maybe residual from tank hose but I don't know?

  • @jamesbennett9654
    @jamesbennett9654 2 года назад

    Are we really watching a player mechanic?

  • @LarryIden-sx2ki
    @LarryIden-sx2ki Год назад

    No volume

  • @PhilTownsend-pp5vx
    @PhilTownsend-pp5vx Год назад

    And no sound wtf

  • @MakeMoneyTeam33
    @MakeMoneyTeam33 2 года назад

    Did anyone else get this video without any volume?

  • @timsuchomel5524
    @timsuchomel5524 2 года назад

    No sound

  • @jackkiplinger9399
    @jackkiplinger9399 2 года назад

    use time lapse.