Make sure that the rubber pad is still between the brake and the deck before you screw tight :) If you lost the rubber pad or its damaged, exchange it to any other rubber material so there is no metal on metal :)
Thanks for the video. I bought other wheels same size but now the brake is on the wheel. Can I bent the brake so it fits or do I brake the metal by doing this?
@@ChilliScooterTV yes a Chili pro scooter. We managed to get it right but the distance between the break and wheel is minimum. Different than it was before. Also the second screw underneith can get tight anymore but don't think it is necessary?
Wahrscheinlich stimmt dann irgendetwas mit der Kompression nicht. Vermutlich ist die Kompressionsschraube zu locker. Könnte aber auch sein, dass die Klemme nicht richtig aufsitzt und festgezogen ist. Schwer zu sagen auf die Entfernung ✌
No, many breaks have different screws. Better take a brake from the same brand as from your deck :) To find the screws just cut two straight lines in your griptape, lift it up and see where the screws are. When your done, you can just press the griptape back down :)
@@randomaccount5525 This looks like a typical two bolt break. Our break should fit on your scooter :) www.chilli-proscooter.de/p/chilli-flex-brake-100/110mm-black
my scooter break keeps going loose like an hour after i tighten it how do i fix it
Try to use "LockTide" on the screws or make them even tighter
Can i use my scooter without a break?
You can but be careful with your shoes :D
@@ChilliScooterTV thank you
What is that blue stuff you put on the screw?
Thats Loctite :) This prevents the screw from loosening so easily
My brakes are vibrating causing unpleasant noise even when I screwed them in tightly. How do I fix that?
Make sure that the rubber pad is still between the brake and the deck before you screw tight :) If you lost the rubber pad or its damaged, exchange it to any other rubber material so there is no metal on metal :)
@@ChilliScooterTV thank you very much for help I will try that
Thanks for the video. I bought other wheels same size but now the brake is on the wheel. Can I bent the brake so it fits or do I brake the metal by doing this?
wich Scooter you have? is it a Chilli?
@@ChilliScooterTV yes a Chili pro scooter. We managed to get it right but the distance between the break and wheel is minimum. Different than it was before. Also the second screw underneith can get tight anymore but don't think it is necessary?
How did you get to own your own scooter shop
Ich habe mein Headset umgebaut und alles wie in den Videos gemacht aber meine Bar wackelt immer 🛴
Wahrscheinlich stimmt dann irgendetwas mit der Kompression nicht. Vermutlich ist die Kompressionsschraube zu locker. Könnte aber auch sein, dass die Klemme nicht richtig aufsitzt und festgezogen ist. Schwer zu sagen auf die Entfernung ✌
Can you put any brake on a scooter? Also, how will you know where to cut the griptape?
No, many breaks have different screws. Better take a brake from the same brand as from your deck :)
To find the screws just cut two straight lines in your griptape, lift it up and see where the screws are. When your done, you can just press the griptape back down :)
@@ChilliScooterTV Thanks for the info
@@ChilliScooterTV I have a North Arrowhead scooter and I can't get much information about it since it's not available anymore.
@@randomaccount5525 This looks like a typical two bolt break. Our break should fit on your scooter :)
www.chilli-proscooter.de/p/chilli-flex-brake-100/110mm-black
@@ChilliScooterTV Thanks, I'll look into buying it
Hallo
How to get slighted brake's off
Are the screws ok?
If not, try to use a bigger Torx/Star-Bit and a hammer, this works every time.
Greets, Dustin.