Updated note, you can achieve a very similar result without using the solidify modifier, feel free to skip that step if you computer is struggling, it will significantly reduce the number of verts in the scene.
Picked up Blender about a week ago, and on behalf of newcomers like me, I would like to say thank you for such easy step-by-step tutorials! I appreciate a "bite-sized" tutorial, that ends out with a great animation to show for it. Keep it up!
I have no experience at all creating visuals, and only had knew very little of the basics to use Blender. I thought it would be impossible of my skill level to understand and recreate these visual, but I actually did! Gave me a huge boost to continue learning and try to create better visuals in Blender, like this trippy visual. Your pacing and explanations is amazing, seriously amazing tutorial!!!
Nice tutorial man! For anyone having trouble with the Edge Split, in v2.92 of blender you should select Faces & Edges by Vertices in the drop down menu.
@@santiagomiranda1197 Could you be a bit more specific, what exactly is it that you are having trouble with? And which version of Blender are you using?
Amazig! This is so helpful especially because I need something like this for my thesis! THANK YOU SO MUCH! Keep on doing - you deserve to get more followers!
I love this but I cant seem to locate the camera settings re focal length etc? I have ti type N and go to view but I thought they should come up on the right side as in your video? Help please! x
Great video. Wish you were a little bit slower when it came to describing what you were doing When you were clicking different functions but otherwise great video
So apparently using the bisect x y and z makes my blender crash when it renders. Did you have this problem aswel? I don't know why it crashes, because it should be handling the render just fine. This because it plays very smoothly and doesn't lagg at al in viewport.
I'm not too sure, if you're computer isn't too powerful that might be the issue, try rendering as an image sequence rather than a video codec, at least then if it crashes halfway through the animation you can pick up where you left off
@@NebMotion I have tried that aswell, sadly that didn't work either. It got to 7 frames the first time then when i tried to start it from there it kept on crashing aswell. Thanks for the fast reply though, I have rendered it without the bisect. It still looks cool hahaha
I'm having a hard time with the edge split, I'm looking at the search menu and I've clicked the clear seam that I think you're selecting but it seems as though my sphere isn't reacting to it when I use the smooth modifier!
One problem 🖐️...my animation doesn't play in loop, after completing one cycle and start of another cycle it's taking some sort of pause or something in between this cycle which break the loop... what should I do
Sounds like a duplicate frame issue, if your first keyframe is set at 1 make sure you last keyframe is 1 after the end frame so you do not render rhe same frame at the start and end
@@NebMotion Yes, tried in 3 times. On the animation timeline the frame 1 - 121 get linked together so there's a whole orange line going across. Unlike the tutorial. Don't know what i'm doing wrong.
@@NebMotion I've just tried a different tutorial - the simple abstract cube animation and it works for this. I should figure it out if not i'll send it to you :)
when i render it. it plays super fast. dont think you mentioned anything about this in the vid. im like day 2 new at blender. i know photoshop, and illistrator and the old dreamweaver.
@@linusgoblin thank you I would try it but wiped my pc for clean install with all the new hardware. I'll remake it and if I have same issues I'll try this . Thanks for the respones
***UPDATE*** I Figured it out! :) Great Tutorial. But I am having trouble when rendering. When I render animation it shows a black screen. I've tried multiple methods but I can't seem to fix the problem. If anyone can help I would appreciate It...
I'm having a strange behaviour following this tutorial : It works with 2.83LTS but not with 2.90.1 or 2.92 alpha Furthermore the edge split modifier doesn't appear in the modifier list in 2.83 while it does in 2.9x, but there it has no effect. Any one else ? However the result is great !! Thanks for that !
I'm not using a modifier for edge split in this one, you can access it in edit mode by hitting F3 and searching, make sure you have all vertices selected
Yup, I like to explain the reasons why in each video for anyone who is new to blender who will be using default template, also motion blur does not render on the first frame if you set to 0
Updated note, you can achieve a very similar result without using the solidify modifier, feel free to skip that step if you computer is struggling, it will significantly reduce the number of verts in the scene.
@hybriddc For anyone having trouble with the Edge Split, in v2.92 of blender you should select Faces & Edges by Vertices in the drop down menu
Picked up Blender about a week ago, and on behalf of newcomers like me, I would like to say thank you for such easy step-by-step tutorials! I appreciate a "bite-sized" tutorial, that ends out with a great animation to show for it. Keep it up!
No prob, good luck on your journey
These tutorials are insanely well done and majorly underrated. I hope this channel grows like crazy, because it deserves to.
thanks Micah, I hope so too!
Very informative content dude , struggling with creating bleder visuals for my music . Glad to have such channels keeping the community informed.
thank you!
I have no experience at all creating visuals, and only had knew very little of the basics to use Blender. I thought it would be impossible of my skill level to understand and recreate these visual, but I actually did! Gave me a huge boost to continue learning and try to create better visuals in Blender, like this trippy visual.
Your pacing and explanations is amazing, seriously amazing tutorial!!!
Thank you so much
you're a GENIUS this is SICK
thank you
how to make it react with the music ?
Bake sounds to F-curves, I do not have a tutorial on it yet but im sure you can find one
@@NebMotion thankyou man,found it
Awesome video! Very Helpful and well explained...you deserve definitely more followers
Thank you!!
Nice tutorial man! For anyone having trouble with the Edge Split, in v2.92 of blender you should select Faces & Edges by Vertices in the drop down menu.
Thanks, I'm going to copy this onto my pinned comment for visibility
I have a problem with this, the edge split. Can you explain me plis
@@santiagomiranda1197 Could you be a bit more specific, what exactly is it that you are having trouble with? And which version of Blender are you using?
That's really cool! I appreciate the tutorial!
No problem!
Amazig! This is so helpful especially because I need something like this for my thesis! THANK YOU SO MUCH! Keep on doing - you deserve to get more followers!
thank you!!
Working on this one right here this tek is crazy!! 🎉
Yeee
i had to click on it, i had to :'D :'D :'D best music, best visuals, nice dude!!! happy trippy festivals to you :)
Glad you enjoyed it!
Thank you so much for the tutorial, I so want to learn to create these phenomenal clips.
No problem at all
Amazing tutorial, thanks for sharing this knowledge!
No problem at all!
I made one and posted it on my channel. Came out super sick, thanks!
Very cool!
Need to make a video for one of my songs and this is such a great tutorial for what I’d like to do. Thanks dude!
That's great! Let me know once you've finished, I'd love to see what you come up with from this
Thanks mate! Great tutorial! 👍😃👍
No prob
That's awesome. Just the kind of thing I'm interested in. Thank you so much.
I'm glad you enjoyed!
Thank you bro this helped me out alot!
No prob
Very nice tutorial!
Thanks
honestly thanks dude
No probs
Nice!!
Thanks
great tutorial!
thanks
LOOOOOOOOVED IT 😍🧡🧡🧡
:D
Sick!
Yeee
Thanks Neb! x
no problem :)
Really cool
Thank you!
Just to say on setting keyframe you can right click on factor x
In blender 3.1.2 this modifier for spliting doesnt work, im looking all the time what you do, but i cant see sphere is spliting ... -.-"
have you added the smooth modifier? the split starts to take effect once you add that and play with the parameter
Thank you for sharing this! You are awesome. Liked, subscribed, and followed on Instagram.
Thank you
Great Stuff!!!!
Thanks
Great ! Merci beaucoup Vincent France
No problem
I love this but I cant seem to locate the camera settings re focal length etc? I have ti type N and go to view but I thought they should come up on the right side as in your video? Help please! x
You need to have the camera selected in order for it to show up on the right side menu
@@NebMotion Duh!! Thanks Neb x
Have you done any B3D mandelbulb 3D videos?
i havent worked that out yet sorry
COOL
Yeahhhh
could you utilize the same kaleidoscope technique on a video in blender?
Yeah I got some ideas I've been fucking Round with
i hit render befor saving it crashed and now cant open and have to start from last save pont......
always save before rendering! Blender can easily crash if there are a lot of calculations in the scene.
@@NebMotion thanks for the quick reply.
Great, thank you
No problem
Great video. Wish you were a little bit slower when it came to describing what you were doing When you were clicking different functions but otherwise great video
So apparently using the bisect x y and z makes my blender crash when it renders. Did you have this problem aswel? I don't know why it crashes, because it should be handling the render just fine. This because it plays very smoothly and doesn't lagg at al in viewport.
I'm not too sure, if you're computer isn't too powerful that might be the issue, try rendering as an image sequence rather than a video codec, at least then if it crashes halfway through the animation you can pick up where you left off
@@NebMotion I have tried that aswell, sadly that didn't work either. It got to 7 frames the first time then when i tried to start it from there it kept on crashing aswell. Thanks for the fast reply though, I have rendered it without the bisect. It still looks cool hahaha
i dont see the edge split
F3 and search edge split
@@NebMotion i got it thank you. just finished the animation, rendering right now.
@@NebMotion also thank you very much for the tutorial, my animation looks SICK
@@elias6113 no problem I'm glad
What if i pressed A and G on the whole thing then it went black what do i do
If in doubt Ctrl z
@@NebMotion legend thanks for replying so fast wow
I'm having a hard time with the edge split, I'm looking at the search menu and I've clicked the clear seam that I think you're selecting but it seems as though my sphere isn't reacting to it when I use the smooth modifier!
Before you select edge split ensure you are in edit mode and have all vertices selected, A is the shortcut to select everything
@@NebMotion I'll try that soon when I get the chance thank u :)
@@NebMotion omg I got it I just hadnt noticed the vertices specifically werent selected! Thanks a lot man love your videos
@@auracle420 no problem, happy to help!
One problem 🖐️...my animation doesn't play in loop, after completing one cycle and start of another cycle it's taking some sort of pause or something in between this cycle which break the loop... what should I do
Sounds like a duplicate frame issue, if your first keyframe is set at 1 make sure you last keyframe is 1 after the end frame so you do not render rhe same frame at the start and end
Not working... I applied the same
@@NebMotion I followed your tutorial step by step as it is but results are different... your end render is in loop but my is messed up
@@049harshrathore8 without seeing the file it's hard to help, feel free to send to me and I'll have a look when I have some free time
@@NebMotion thanx for reply, but last question...wher should I share files with you
How do I save my animation as a video that I can share?
This is explained at the end of the video
Thanks!
How can I put this in a VR headset? What are there steps I need to take? Thanks
How can we animate this to music?
Bake sounds to F-Curves, I will make a tutorial on this
@@NebMotion That would be amazing. Thank you!
here m8 am thinking of getting in 2 visuals.. do u recommend a programe for beginer > dont mind paying 4 it..cheers
Blender for sure and it's free
Just follow my tuts they're beginner friendly
Background for some reason won’t change colors when I attempt to change it :/ any suggestions?
this is an intense software
it's amazing
I LOVE YOU
I love you too i really do
I tried to follow this tutorial, I am on a mac and I found the shortcuts too confusing to follow. I am also really new to blender which does not help.
Sorry to hear that, hot keys are very important for your workflow in blender so I would suggest taking some time to learn them!
I followed everything... Why is my cube not rotating?
I'm not sure sorry, did you definitely key in the rotation parameters?
@@NebMotion Yes, tried in 3 times. On the animation timeline the frame 1 - 121 get linked together so there's a whole orange line going across. Unlike the tutorial. Don't know what i'm doing wrong.
@@rahrtist sorry it's hard to help without seeing the project file, feel free to send it to me I'll take a look
@@NebMotion I've just tried a different tutorial - the simple abstract cube animation and it works for this. I should figure it out if not i'll send it to you :)
@@rahrtist thanks, just let me know always happy to help!
Thanks alot such a great Tutorial ?
my setup: ryzen5 3600
1660super
16gb RAM
i wish i could help but i'm not sure, try rendering still frames
My render is looking very blurry when I click "Render Image"
When I do "Render Animation" - it's completely black. Can someone help me with this?
Try turn off motion blur if you are rendering a still frame. No idea why your screen goes black when you render animation
detail down how much?
i dropped it fully
Sorry I don't understand
when i render it. it plays super fast. dont think you mentioned anything about this in the vid. im like day 2 new at blender. i know photoshop, and illistrator and the old dreamweaver.
Does it play at the same speed as my one? Make sure you're at 24fps, if you're set to a higher frame rate you'll need to extend the end frame
You can put time remapping at 50 and end frame at 240 for a quick 2x slow
@@linusgoblin thank you I would try it but wiped my pc for clean install with all the new hardware. I'll remake it and if I have same issues I'll try this . Thanks for the respones
***UPDATE***
I Figured it out! :)
Great Tutorial. But I am having trouble when rendering. When I render animation it shows a black screen. I've tried multiple methods but I can't seem to fix the problem. If anyone can help I would appreciate It...
glad to hear you worked it out, what was the problem?
@@NebMotion I had to go into view and then click on viewport render animation. That fixed the problem.
I'm having a strange behaviour following this tutorial :
It works with 2.83LTS but not with 2.90.1 or 2.92 alpha
Furthermore the edge split modifier doesn't appear in the modifier list in 2.83 while it does in 2.9x, but there it has no effect.
Any one else ?
However the result is great !!
Thanks for that !
I'm not using a modifier for edge split in this one, you can access it in edit mode by hitting F3 and searching, make sure you have all vertices selected
Now it is in Mesh menu -> Split -> Faces & Edges by Vertices
@@no___nie legend
just set your first time frame at 0 and save default blnd file so next time you can just type 120 and not go all the bother to make 1-121
Yup, I like to explain the reasons why in each video for anyone who is new to blender who will be using default template, also motion blur does not render on the first frame if you set to 0
@@NebMotion This is probably why my last animation had a big flicker I couldnt figure out where tf it was
@@vantablacknl yeah took me ages to realise this! I think it might be fixed now but my habit is to always start from 1
Man thats cool as fuck. Do you make music videos as well?
Yeah man drop me a dm on insta I'll share some links
Ooooh! NOT that elusive edge split!! Lol x
Lol!
i dont found edge split in portuguese ...
That link is broken by the way but never fear I will find you on Instagram! lol x
thanks for reporting that! will fix
Rosie confira o SET do Invasiohm no showcase PsyAlliance Brasil - Bloco dos Fritos - Belo Horizonte - MG 👌 ruclips.net/video/eqCPi2sTDcQ/видео.html
my pc died at 7:52