Personally I think rear turn signals are very important on a bike. I think the Fender Eliminator looks pretty sick but those turn signals don't look that effective
Not bad, I did go by your list but ended up changing alot. Like the tst flush mounts i made sure the type i got and had to do a small mod to the bike but ended up with small scratches do to bad fit. I have a vid in my profile but its old, and horrible lol. I have the 2019 CBR300R Red/White so it was tricky on the route i wanted to go in mods for this bike. I'll make a better list and video when i finish the headlights in a couple weeks. I just ordered the red demon eyes, gonna be a pain to install. I did order a 2015+ rear seat cowl but was wrong color red, couldnt find the red i needed and the paint is very expensive. 200 to color match or 350 for the exact paint. Not worth it for a 160 part from honda. But wanted it cause of the gen honda front seat as they have a lower one in carbon. And added the rear tire hugger from honda done in carbon. I tried to keep most in gen honda upgrade parts and the CBR themed from the handle grips to frame slider is all cbr themed. Even the red wheel tape is cbr themed and was a pain to do. I did em gloss black but have two others that are reflective red, one being in paint reflective and the other used from same material as a stop sign decal but didnt use em. Good work on your bike, I liked that black and gold you did. Also you lowered the front end 1 inch, where did you buy that from?
Yo may i ask something got same bike cbr 300r 2016 and i found the handlebars as u have. I just have one question did you buy just the handlebar grips or hablebar grips and throttle control tube? because i found the same grips and they have the option to buy them with throttle control tube. Do i need the control tube or just the grips? Can you please tell me what u did? Thanks
@@wheeliebars Everyone keeps telling me to not mod my 300r, why would you polish a turd is what they say. I love my little 300, yeah I wish I were a little faster but honestly I ride my 300 like a 600. I keep up with my buddies on litre bikes for the most part... (instagram is whippinghauss if you wanna check it out)
Okay. Maybe It's something up with the current model's. Per the 2020 model 300r, I have to bend the license plate inward to get the holes to line up. But, I did see this in one of Hotbodies installation videos. I could not get a license plate frame to line up. I would not mind to drill another hole, but, the eliminator is short so there is no excess material to drill another hole. I gave up and going to return it. I had issues with the license plate light and indicators as well. I can't seem to find one that I like.
perfect Gmaer I appreciate it, i’ve put a bit of work into it haha. I really wish I could find a way to get rid of the ugly exhaust and still have a good sound
hello! what are the torque specs on the 2017 CBR 300 r, for the chain adjustment/rear tire replacement and or where would I look for no bullshit information on said bike.
Is this a joke? Every mod here is ridiculous or the reasons are bad. The windscreen adds wind protection though. Should have bought better tires, braided brake lines, and maybe a dyno-tune.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
You know you can put limks to the parts on Amazon and get a commission for it right??👍👍 Great vídeo. Well explained!!
First mod I would do is to get rid of the stock exhaust mufler, and get a nice lightweight one. Second - 150/60 17 rear tire .
Is that the widest tire the 300 can hold?
Looks nice !
Witch brand of led lights will work best for my Honda cbr300r year 2022 ? I want to change all the front lights to l-E-D any tips ?
Personally I think rear turn signals are very important on a bike. I think the Fender Eliminator looks pretty sick but those turn signals don't look that effective
Hi! Where did you get the white rim tape? Is it reflective?
hi bro, can you tell me where can I buy the rear &front turn light?
What year is your bike ??
Not bad, I did go by your list but ended up changing alot. Like the tst flush mounts i made sure the type i got and had to do a small mod to the bike but ended up with small scratches do to bad fit.
I have a vid in my profile but its old, and horrible lol.
I have the 2019 CBR300R Red/White so it was tricky on the route i wanted to go in mods for this bike. I'll make a better list and video when i finish the headlights in a couple weeks.
I just ordered the red demon eyes, gonna be a pain to install.
I did order a 2015+ rear seat cowl but was wrong color red, couldnt find the red i needed and the paint is very expensive. 200 to color match or 350 for the exact paint. Not worth it for a 160 part from honda. But wanted it cause of the gen honda front seat as they have a lower one in carbon. And added the rear tire hugger from honda done in carbon.
I tried to keep most in gen honda upgrade parts and the CBR themed from the handle grips to frame slider is all cbr themed. Even the red wheel tape is cbr themed and was a pain to do. I did em gloss black but have two others that are reflective red, one being in paint reflective and the other used from same material as a stop sign decal but didnt use em.
Good work on your bike, I liked that black and gold you did.
Also you lowered the front end 1 inch, where did you buy that from?
How did you change the color?
Yo may i ask something got same bike cbr 300r 2016 and i found the handlebars as u have. I just have one question did you buy just the handlebar grips or hablebar grips and throttle control tube? because i found the same grips and they have the option to buy them with throttle control tube. Do i need the control tube or just the grips? Can you please tell me what u did? Thanks
I wish my 300 was this nice
Bryan Johnson couple hundred dollars would do the trick haha
@@wheeliebars Everyone keeps telling me to not mod my 300r, why would you polish a turd is what they say. I love my little 300, yeah I wish I were a little faster but honestly I ride my 300 like a 600. I keep up with my buddies on litre bikes for the most part... (instagram is whippinghauss if you wanna check it out)
What size are your rear tire
Did you have to bend your license plate frame to get it to fit with the Hotbodies? Drilled another hole?
It’s been so long I barely remember, but I do remember it fit fine but the turn finals wouldn’t stay
Okay. Maybe It's something up with the current model's. Per the 2020 model 300r, I have to bend the license plate inward to get the holes to line up. But, I did see this in one of Hotbodies installation videos. I could not get a license plate frame to line up. I would not mind to drill another hole, but, the eliminator is short so there is no excess material to drill another hole. I gave up and going to return it. I had issues with the license plate light and indicators as well. I can't seem to find one that I like.
good looking bike
perfect Gmaer I appreciate it, i’ve put a bit of work into it haha. I really wish I could find a way to get rid of the ugly exhaust and still have a good sound
@@wheeliebars I have Leo Vince LV-10 and it sounds great to me. Quite loud but idc
Hi pls can you give me the Link for the fender elimator. Nice video
11-13 HONDA CBR250R: Hotbodies Racing TAG Fender Eliminator Kit (GLOSS BLACK) www.amazon.com/dp/B005ER3BE6/ref=cm_sw_r_cp_api_i_QOuKCbM1NGSAF
Are you from Chattanooga??
Where did u get your fairings?
Pablo Diablo they’re oem. Came on the bike. Never have found aftermarket fairings for it
@@wheeliebars I bought the same handlebar grips. What steps did take to install
hello! what are the torque specs on the 2017 CBR 300 r, for the chain adjustment/rear tire replacement and or where would I look for no bullshit information on said bike.
ringhunter 100 you’ll have to look in a service manual, can be found on google
Link to the ram mount please?
Ever heard of google lol
@@LunchBXcrue wtf is a google
What year is that CBR?
shanquella Bandy 2015
Is this a joke? Every mod here is ridiculous or the reasons are bad. The windscreen adds wind protection though. Should have bought better tires, braided brake lines, and maybe a dyno-tune.
Mike Cronis wouldn’t spend that kind of money on a bike I might have 6 months man, in fact i’m glad I didn’t because I sold it a long time ago
@@wheeliebarslol.
Russian Sound Track ? shit jack..