You are a life saver!! After midnight stuck in a parking lot, tow can’t come for another hour. Hot and humid. Took us just a couple of minutes to get it in gear. Thank you SO much!!
Dude you're doing too much work ...take the battery side plate off that's holding the pcm or tcm... unscrew the shift cable two screws that are holding it to the transmission and pull it up to you.... the part you can get at autozone its a g.m part dorman part number 14055.. its in the help me section. They will tell you at autozone that its a dealer part only but its NOT my eye test knew they didn't know. I had my broken shift bushing in my hand and compared it to the dorman part 14055 and i bought the part. I put a little oil for lube used my pliers and pressed it in and it worked perfectly. So to anyone with this issues YOU'RE WELCOME IN ADVANCE ✊🏿 the part costed about 20 dollars at autozone.
Hi man, not sure whether you will see this. But, thank you. I purchase Dorman part #14055 (Use the transparent one, not the white one). I managed to put the cable back on the axis. (I didn't remove the battery. But, I modified the bushing a little bit.)
@xiaoyuhao5151 glad it worked bro... I don't have the car anymore gave it to my uncle, car still runs great had about 107k on it but the bushing is still holding strong 💪🏽
Thanks, I bought the part 14055 for $17.55 at autozone, unbolted the cable, and the part fit with a little help with a screwdriver and a pliers, was done in less than an hour. Thank you too! I'm so happy 👍
No need to take the battery tray out, just the side piece thats held in with 3 #10 bolts. Remove the 2 "13 bolts that secures the shifter cable on to of the transmission, and change the piece of shii bushing and snap it back in place, also wouldn't hurt to slip a zip tie over it.
You should be getting millions of views.I just got my dodge dart gt back from dealer for this same recall but now right headlight isn't working strangely. Do you know any reason this occurred.I really enjoyed your video very educational.
Lifesaver. Thank you. Just for emergencies, you can put the shift cable back on. It may work for an emergency situation. If not, you have to manually shift the gear by moving the elbow-shaped thing (under the battery) forward or backward to shift the gear. Most importantly, if you have a dart, go to the Dodge dealer. This is a recall #v34. They will take care of it. If you have to deal with it by yourself like the previous comment "Dorman #14055 (transparent one. Do not put it on the male part (you will find it hard to remove), before you put in the female part(the ring at the end of the cable). You may need to modify a head of it to make it in.)" worked in my dart.
And u don’t need to take off all that stuff to do it all u need to do is unscrew the bolts on the trans cable so u can pull it next to the battery trey to put bushing your doing all the extra work for nothing
I got stuck at a light yesterday because my care wouldn’t go it got stuck and when i tried to go it just rev. It would let me go into each gear but not go. I got a service transmission thing showing up all my gears are flashing when i move my shifter up and down through them all. Idk if this is the issue that i need to fix or if it’s something else
That sounds like a different issue, I would get the code read by autozone for free and they will be able to tell exactly what is wrong based on the service transmission code it’s throwing. They will be able to tell you the part you need and how much
Thanks wife called 20min later i watched this and got her home parts store $16 done so what im out $25 gas and bushing lol cheaper than hook and shop cost
Is this normal to happen repeatedly?....I've changed it twice in four days because it was broken, and the one I changed today a couple of hours ago just broke .... what am I doing wrong?
You are a life saver!! After midnight stuck in a parking lot, tow can’t come for another hour. Hot and humid. Took us just a couple of minutes to get it in gear. Thank you SO much!!
how could you possibly do this at midnight without the tools in the product that he shows that cost 30 bucks?
Because you can pull the lever into drive or whatever position you need it
Been waiting 2 hours for a tow, I’m hopping out and doing this now in the rain. Big thanks👍🏾
Dude you're doing too much work ...take the battery side plate off that's holding the pcm or tcm... unscrew the shift cable two screws that are holding it to the transmission and pull it up to you.... the part you can get at autozone its a g.m part dorman part number 14055.. its in the help me section. They will tell you at autozone that its a dealer part only but its NOT my eye test knew they didn't know. I had my broken shift bushing in my hand and compared it to the dorman part 14055 and i bought the part. I put a little oil for lube used my pliers and pressed it in and it worked perfectly. So to anyone with this issues YOU'RE WELCOME IN ADVANCE ✊🏿 the part costed about 20 dollars at autozone.
Hi, I'm following the instructions, so the part autozone have it, but it looks a bit different
@@danieldiab8685 it will work..use it... mine is still on the car and it has no issues.
Hi man, not sure whether you will see this. But, thank you. I purchase Dorman part #14055 (Use the transparent one, not the white one). I managed to put the cable back on the axis. (I didn't remove the battery. But, I modified the bushing a little bit.)
@xiaoyuhao5151 glad it worked bro... I don't have the car anymore gave it to my uncle, car still runs great had about 107k on it but the bushing is still holding strong 💪🏽
Thanks, I bought the part 14055 for $17.55 at autozone, unbolted the cable, and the part fit with a little help with a screwdriver and a pliers, was done in less than an hour. Thank you too! I'm so happy 👍
No need to take the battery tray out, just the side piece thats held in with 3 #10 bolts. Remove the 2 "13 bolts that secures the shifter cable on to of the transmission, and change the piece of shii bushing and snap it back in place, also wouldn't hurt to slip a zip tie over it.
I'm literally stuck at a car wash
On goddd mee too widd minee
@@jaybeezzywe saw
Q
Thank you, I was able to fix it myself, save towing costs, and ease my mind. Love your channel. Thanks again 👍
I got frustrated with the battery tray and just used a hole saw on the bottom of the tray lol.
You should be getting millions of views.I just got my dodge dart gt back from dealer for this same recall but now right headlight isn't working strangely. Do you know any reason this occurred.I really enjoyed your video very educational.
Garnet Kelly could be that a ground wire wasn’t put back properly or just double check and make sure it doesn’t just need a new bulb
Lifesaver. Thank you. Just for emergencies, you can put the shift cable back on. It may work for an emergency situation. If not, you have to manually shift the gear by moving the elbow-shaped thing (under the battery) forward or backward to shift the gear. Most importantly, if you have a dart, go to the Dodge dealer. This is a recall #v34. They will take care of it. If you have to deal with it by yourself like the previous comment "Dorman #14055 (transparent one. Do not put it on the male part (you will find it hard to remove), before you put in the female part(the ring at the end of the cable). You may need to modify a head of it to make it in.)" worked in my dart.
this video helped me, thanks brotha
Glad I could help
Yooo. Thank you!!! Worked on my 2012.
You’re Life saver.
literally saved my day, thank you!
thx for the help - also is it safe to say that shifting gently and slowly w the shifter gear could go a long way in this never happening?
Thank you. I was just trying to know for sure which direction the blushing went.
Same for 2014's, fyi. Thanks man!
thank you so much mine just started having this problem! liked and subscribed
AWESOME, Thank you for sharing your knowledge really appreciate it 👍🏽
I’ve got ponytail holders holding mine together for about a year now.
Do you still have the pony tail holders there because that's all I have and I am having the same issue right now
Trip3x is that still working for you? Could you share how, mine broke twice after replacing it.
And u don’t need to take off all that stuff to do it all u need to do is unscrew the bolts on the trans cable so u can pull it next to the battery trey to put bushing your doing all the extra work for nothing
I got stuck at a light yesterday because my care wouldn’t go it got stuck and when i tried to go it just rev. It would let me go into each gear but not go. I got a service transmission thing showing up all my gears are flashing when i move my shifter up and down through them all. Idk if this is the issue that i need to fix or if it’s something else
That sounds like a different issue, I would get the code read by autozone for free and they will be able to tell exactly what is wrong based on the service transmission code it’s throwing. They will be able to tell you the part you need and how much
You can still check under the hood and make sure the cable still attached
Great vid, very informative thank you bro
This video saved me alot!!! Thanks dude!!!
Thanks wife called 20min later i watched this and got her home parts store $16 done so what im out $25 gas and bushing lol cheaper than hook and shop cost
Is this normal to happen repeatedly?....I've changed it twice in four days because it was broken, and the one I changed today a couple of hours ago just broke .... what am I doing wrong?
Make sure it snaps all the way in and that you’re not installing it upside down
2 years later first time seeing December 18 2022
So helpful
Is this the automatic trans? Cus mine is a 13 dart sxt that won’t go into reverse
Yes this is the automatic
Awesome man thank you so much you safe me a lot of money and time
Thank you ❤️
Did u get any codes on the obd reader ?
No I did not
This literally just happened to me about 45 min ago
Thank you so much 💓
Great video !!!
do I have to take off all of these things first?
To move the car into gear no. But to fix the bushing yes
Haha I had this problem 😭😭😭
Where do we order the exact cable from?
The cable I’m not sure but the bushing is from bushingfix.com
This just happen to me & I don’t know where to start
Just went on a 6 hours trip stuck in drive lol
where can I buy the lil piece
Bushingfix.com
where did you buy it?
I don’t remember of the top of my head I’m pretty sure it’s on the packaging in the video
Bushingfix.com
Me pasó justo eso, but I dont know how this name it.
dodge is junk