Aloha and good 👍 evening 🌙🌚 Rob. This is a fantastic installation that requires patience, tact, and steadiness. This installation looks 👀 awesome as you have many features at the tip of the grab handle. Awesome ✨ video 📼 Rob.🤜🤛📼🐕🐶🤙🎓💪👀🤲🌟🔅🔍👍😎🤠😇💰🤓🏡😄🙌👐⛅
Hey Rob, I am installing my Voswitch JL800 in my 2023 Gladiator Sport. I remember one video somewhere that recommended connecting the red control wire to fuse F53, Wireless Speaker. However, I just discovered that the people who installed my winch used that fuse already. My question is: Does it matter what fuse I use? If I find any key-powered fuse, can I just use any one of them? OR should I splice my control wire to the winch control wire to share the connection to Wireless Speaker? I like your comments to not overthink this install. It's incredibly easy to install! I just need to be sure I don't cause future problems by using the wrong fuse that works with the key. (I know it's keyless, so I guess I should say "Accessory-activated" fuse).
I don't do anything comment wise much but this has really helped me decide to try this product. I'm just on the fence about the 8 or the 4 switch version? Thanks and they should sponsor you.
Good choice! I like the switch location and looks with your installation. I went with the 6 switch Voswitch and to be honest with the low installation location behind the shifter and with these old eyes I have a hard time reading the labels on the switches. Nice install.
Nice! I literally just installed the same thing on mine. The grab handle location is much better than behind the shifter. Don't forget to clean your MAF Sensor (for the rough idle). 😁
@ geofftentwo: Agreed! I’m not a fan of having to look around or reach around the shifter. If you have the factory auxiliary switches there already, the benefits of being to set the switch from momentary to toggle is neat, but I like the JL400’s location much better.
Thanks for the helpful vid! When you unbolted the Grab handle & trim- were there also clips holding it in place? Also, what do you use to fill the extra space in the firewall grommet that you drilled out? The Voswitch JL400 is by far one of the sleekest switch setups I have seen and I can't wait to install mine.
Great video! I helped my cousin install this over the weekend. We got power to the switch and everything but we weren’t able to turn on his Baja design pods once they were connected. Everything was connected correctly. Any suggestions? Thank you
HA this video is exactly what Ive been wanting to see! I just ordered one of these to go with some Diode Dynamics pod lights. going to be 4 of them to wire up (to two switches). Have no idea what Im doing but hey, its only a 60k vehicle right? lol
@ Phelan DeLuna: Sorry, but Mopar/Jeep does NOT run include a wiring harness for the factory auxiliary switch plate unless you bought the factory auxiliary switch option. If you choose to install Mopar auxiliary switch package yourself, not only do you have to run the harness, but you have to actually add straggler pin wires to existing connectors. After all that is done, the vehicle has to be reflashed to recognize the factory auxiliary switch plate.
@ Phelan DeLuna: Ah. Now I see the source of confusion. Yes, there is a fusebox and wiring near the battery, however, none of it pertains to the factory auxiliary switches. All of the factory switch-specific wiring is in the harness that is not in the vehicle unless that package is ordered.. In effect, the addition wiring, cost and effort to install the factory auxiliary switches is actually greater than the Voswitch.
Hey Rob. No smoke! That’s funny. 🙂
Lol! It would have been a bummer😬
Very cool install, Rob, looks stealthy, high-end custom, plus it's in the line of sight when driving, makes more sense than under the steering wheel.
All positives so far. Works great too👍
Fantastic switch just installed the 120 which is a 12 switch setup in my 22 gladiator looks factory
Aloha and good 👍 evening 🌙🌚 Rob. This is a fantastic installation that requires patience, tact, and steadiness. This installation looks 👀 awesome as you have many features at the tip of the grab handle. Awesome ✨ video 📼 Rob.🤜🤛📼🐕🐶🤙🎓💪👀🤲🌟🔅🔍👍😎🤠😇💰🤓🏡😄🙌👐⛅
Hoping for the 2024 grab handle switch kit
It’s a great setup.
Hey Rob, I am installing my Voswitch JL800 in my 2023 Gladiator Sport. I remember one video somewhere that recommended connecting the red control wire to fuse F53, Wireless Speaker. However, I just discovered that the people who installed my winch used that fuse already. My question is: Does it matter what fuse I use? If I find any key-powered fuse, can I just use any one of them? OR should I splice my control wire to the winch control wire to share the connection to Wireless Speaker? I like your comments to not overthink this install. It's incredibly easy to install! I just need to be sure I don't cause future problems by using the wrong fuse that works with the key. (I know it's keyless, so I guess I should say "Accessory-activated" fuse).
Here’s my install video: ruclips.net/video/tIsmDtKY0Os/видео.htmlsi=EmjtQtnx6sR4PNF7
I used your video to help me install this but I did it through the windshield. Great video, thanks!
Smart move!! Thanks for watching 👍
Looks awesome rob 🎉
Thanks👍
I don't do anything comment wise much but this has really helped me decide to try this product. I'm just on the fence about the 8 or the 4 switch version? Thanks and they should sponsor you.
Ya hear that Voswitch? Email me😂
Rob. That is so sweet. The tacome needs a grab handle with that. Heck all pickups need it.
It’s too cool. What a great product 👍
That is a really sweet setup Rob.
IT’s too awesome! Love the look👍
Awesome product. What size bolt did you use for the bracket to bolt to the body?looks like you used 1 OE bolt.
No idea🤔🤔
Good choice! I like the switch location and looks with your installation. I went with the 6 switch Voswitch and to be honest with the low installation location behind the shifter and with these old eyes I have a hard time reading the labels on the switches. Nice install.
Thanks👍
I meant is it the JL 400 switch kit that comes with the switch for Harry the grab handle set up?
See the video description 👍
Looks sweet. If I didn't have the factory aux switches, I'd jump on those too.
It’s pretty cool👍
Nice! I literally just installed the same thing on mine. The grab handle location is much better than behind the shifter. Don't forget to clean your MAF Sensor (for the rough idle). 😁
@ geofftentwo: Agreed! I’m not a fan of having to look around or reach around the shifter. If you have the factory auxiliary switches there already, the benefits of being to set the switch from momentary to toggle is neat, but I like the JL400’s location much better.
That is quite a switch controller. The price is great and it is much simpler to set up vs the dash mount type. 👍
Absolutely! So simple and looks great too👍
Thanks for the helpful vid! When you unbolted the Grab handle & trim- were there also clips holding it in place? Also, what do you use to fill the extra space in the firewall grommet that you drilled out? The Voswitch JL400 is by far one of the sleekest switch setups I have seen and I can't wait to install mine.
Great video! I helped my cousin install this
over the weekend. We got power to the switch and everything but we weren’t able to turn on his Baja design pods once they were connected. Everything was connected correctly. Any suggestions? Thank you
Double check your wiring. No reason it shouldn't work.
HA this video is exactly what Ive been wanting to see! I just ordered one of these to go with some Diode Dynamics pod lights. going to be 4 of them to wire up (to two switches). Have no idea what Im doing but hey, its only a 60k vehicle right? lol
Lol! I recommend you watch this video over and over and over....😂
That is slick!
It’s pretty cool👍
Can you shoot me the part # or model # of the Voswitch unit? I want yo get it is it the JL 100 unit? Thanks🤙Harry in Fl.
Seen you had a off color bolt in the box under the hood. Did the holes line up or did you have to drill a new hole for the bracket.
I did not drill any holes.
If you add even more than you currently have switches for, you can buy the Jeep aux switches to put in, the wiring is already there for it...
Nope, the wiring was not there.
@@robmotiveplus did your mother buy it used, or new?
The wiring should already be there, unless someone took it out...very odd
@ Phelan DeLuna: Sorry, but Mopar/Jeep does NOT run include a wiring harness for the factory auxiliary switch plate unless you bought the factory auxiliary switch option. If you choose to install Mopar auxiliary switch package yourself, not only do you have to run the harness, but you have to actually add straggler pin wires to existing connectors. After all that is done, the vehicle has to be reflashed to recognize the factory auxiliary switch plate.
@@trashrelocationengineer6472 the wiring in the front at the battery is there.
Yes, you have to buy the switches and harness for inside and connect it
@ Phelan DeLuna: Ah. Now I see the source of confusion. Yes, there is a fusebox and wiring near the battery, however, none of it pertains to the factory auxiliary switches. All of the factory switch-specific wiring is in the harness that is not in the vehicle unless that package is ordered.. In effect, the addition wiring, cost and effort to install the factory auxiliary switches is actually greater than the Voswitch.
Awesome mod
Pretty cool👍
I got one love it
It’s awesome 👍
What cable puller is that.
Like it, going to buy one.
I’m so glad I found this. So much better than the aux switch install IMO👍
I like it pretty neat
It’s too cool. Love that it’s integrated into the grab handle👍
Skipped right over the part that would’ve explained how to remove the plastic grab handle on the a pillar….
Well why did you do that?