Battlefield 2042 SEASON 3 PRO Settings Guide ( Best Visibility and Performance )
HTML-код
- Опубликовано: 20 сен 2024
- Here are the BEST settings for Battlefield 2042. Gain an advantage over your opponents using these settings!
🎮Catch me live on Twitch! / silk
👀 Follow my Twitter! - / silkoce
🎮 Join the lads on Discord! -
/ discord
Silk uses ADVANCEDgg to stay focused ingame!
advanced.gg/?r...
#Battlefield2042 #BF2042 #BF
______________________________________________________________________
Battlefield 2042 marks the return to the iconic all-out warfare of the franchise. Adapt and overcome dynamically-changing battlegrounds with the help of your squad and a cutting-edge arsenal. With support for 128 players*, prepare for unprecedented scale on vast environments. Take on massive experiences, from updated multiplayer modes like Conquest and Breakthrough to the all-new Battlefield Hazard Zone.
battlefield 5,battlefield v,battlefield,ultimate tryhard battlefield 4 optimisation guide,battlefield 4,battlefield 5 best settings,battlefield 5 settings,battlefield 1,battlefield 4 settings guide 2021,battlefield 1 settings guide,battlefield 2042,battlefield 5 ultimate tryhard guide,battlefield 6,battlefield 4 settings 2021,battlefield settings,battlefield v settings guide,battlefield 5 settings guide,battlefield 4 guide
_______________________________________________________________________
An alternative control scheme for players that are used to WASD or joystick flying controls:
W pitch down, S pitch up;
A and D roll;
Mouse yaw and pitch (rifle aim);
Space throttle up +afterburner, Shift throttle down/airbrakes.
This scheme has carried me from bf4 to 2042, as well as Warthunder and Squad. All of the aircraft's rotations are controlled with the 3 fingers on wasd, so its very intuitive to learn and create smooth maneuvers like you would with a joystick. I'd recommend new pilots try it out!
Be aware that you might have to fuck around with inverted controls and then switching key and mouse bindings to get things to work correctly, so definitely hop in a portal server first.
This is for helicopters as well yes?
I'll check this out because my roll sens keeps going from 0 to 100. I either have to swipe my mouse across my damn house to roll or I sneeze and barrel into the sun
Genius!
@@GamerDadKain this is so true, i can't get the sens for mouse and keyboard on aircrafts and some vehicles, its hard! any tips? sens is so low i can't even rotate 45º
@@pav1ui dont know if this answers your question, but silk mentioned he plays with a DPI of 1600 and this makes the rifle aim easier (because it should be faster). I hope this helps
Your bf4 optimization back in the day and settings became my default on all battlefields. You also got me onto Freethy which I thank you for. I haven't even played 2042 yet. Got a nice new PC build arriving any day now so I'l be using your settings for sure. They've always worked wonders in the past for a decent amount of extra frames when I couldn't afford new hardwar, which is all i care about on PC Especially for online fps games. Cheers Silk thumbs up bruv.
Really appreciate the support man it's good to know that these videos help people. FR33THY is an absolute hidden gem. I wish I knew about him earlier and I could've spent my money so much better.
@@SilkOCE Yeah man. Freethy is pure gold. Helped me a bunch with the stuff that matters but you led me to his channel regarding sweet fx or something for bf4.
Anyway I really apprecire the reply from you man. You're also a hidden gem yourself.
An absolute joy to watch believe me.
Oh and just to clarify for anybody else who may read this.
Uniform Soldier Aiming with Coefficient setting at 0% instead of %133 is a must and 100% makes you better at aiming.
All games needs this.
Take it easy Silk thanks dude.
Theres no reason to run Texrture filtering on low. Anisotropic flitering should always be set to 16x aka Ultra. cleans up the image without any real FPS hit. The game looks much better if effects are turned up as well with HBAO on and lighting. running on low feels unnessary since the last update.
I dont know why but on my pc setting texture filtering and aniso filtering from medium to ultra reduces my fps by 30 to 40.
I have an amd rx 6800
theres no need for low setting anymore
Then you make a video
@@commandertoothpick8284 tak diindahkan saat 77 itu 78u mm mm 6
Preach 🙏
Great guide. For those who wonder why that specific range of FOV: Battlefield's FOV is Vertical FOV, so 74 BF FOV is like the classic 90 FOV on CoD or whatever. On older BF games, the setting would tell you what was going to be in horizontal FOV.. so that's why you shouldn't go lower than 74 and higher than 98. 120 vertical fov is HELL
68 vertical fov is 100 horizontal.
74 vertical is 106 horizontal.
78 vertical is 110 horizontal.
@@jb8478 It also depends on your aspect ratio, but no, 74 vertical is 90 for 16:9. In battlefield 4 you can actually see both values in the slider
I'm surprised DICE haven't just straight up removed the Future Frame Rendering setting as that only worked on DX11 in previous titles (it was just their menu naming for Pre-Rendered Frames/Render Ahead command). It has no effect in DX12.
I've found that I can get away with running higher texture and texture filtering settings with no loss to performance due to having a lot of VRAM, so if you want things to look a little better you can do that.
What is vram please
@@Pensioner1203 video memory on your gpu
Nvidia Reflex + Boost does not cap your GPU usage.
The boost part forces your GPU to use max clocks all the time so it won't downclock when not being used much to save power. It basically does the same thing as "prefer maximum performance" in the Nvidia control panel. This can lead to better overall performance and smoothness but will give higher temps on the GPU but not by much.
Wrong...
Does not one person in this comments section know what reflex mode actually does?? 😂😂
@@eillswim I am not talking about Reflex, I was talking about the "Boost" part of Reflex+Boost.
The boost just forces max GPU clocks and turns off any c-states the GPU uses to save power.
Reflex takes over the swap chain of the game, allowing the driver to take control of how finised frames are displayed to the monitor and how to organise the frame que more efficiently using the reflex API, reducing latency.
This is why a lot of people don't bother using the reflex+boost and just use reflex on its own to save power.
I'm tracking targets and popping melons so much easier , after setting the uniform soldier aiming coefficient to 0%. Thank you, silk!!
It's a game changer for me
Just switched this on for myself and already ive noticed a HUGE difference! Once again thank you mr @SilkOCE
Thanks man, amazing video - changed some of the colours to assist my own eyesight and works a lot better. I found myself constantly shooting at my teammates with the default colour, but now can distinguish them much better ;) Keep up the great work and vids.
Glad it helped!
console commands:
cs
WorldRender.LightFilledCsPathEnable 0
WorldRender.TransparencyShadowmapsEnable 0
WorldRender.MotionBlurEnable 0
This video changed my life. Just picked the game up and was doing well but now I’m running 100 fps and the game feels so good.
I’m still getting used to the chipper controls. I consider myself a pretty good pilot but this makes hitting infantry with the mini gun so easy. Just need to rewire my brain in oh shit moments.
Idk why people complain about higher CPU load, its literally what improves performance. They made the game take better use of your CPU, which is why so many, including me have had serious FPS improvements, i earned about 40+ frames after the update
Exactly. I want my PC being fully utilized
answers that question I am seeing about 20% more cpu usage since update 3.0 and this explains it
Cute pfp
We need a minimalistic HUD i see alot of things in my hud bro to much color
Only reason to complain about higher CPU load if you're being bottlenecked due to the changes. If your CPU bottlenecking you, the changes could have made it much worse.
The ADS field of view change felt like aim hacks, Thanks!
Dude, I’ve never played these games on a PC, but I can’t get over how much more aim control you get from a mouse, it is so hard to aim like that on a controller
yeah, i was used to warzone's aim assist, this game is way less agressive with it
This helped so much I am using a gts 1070 rand this fixed a lot of my fps issues
Came for the tips... Pleased to see your absolutelly fire wallpaper
Game is on sale atm. Might actually get it. With all the negative reviews. Did not think it was worth it. We'll see.
Keep the videos coming! Loved your BF4 Content
Edit: ok not first comment, third is fine lol
I'm so happy I found this.
I have the same type of color blindness, I did a test and it seems that either the red/green colorblindness does something with yellow because I found in many of the tests I'm less sensitive to red/green and more senetive to yellows, so to me enemies are also always yellow.
Now the Deuteranomaly colorblind mode in Battlefield 4 (that I'm just recently getting into), has the squad color a similar color to the yellowish enemy colors, that's bloody stupid.
This game allows you to set everything yourself and this is the solution, because everyone is a little different, and on some maps you want something else.
Having set modes for colorblindness is silly, since the experience of color is a subjective experience measured through instruments that are not human eyes when we try to define an objective definition.
We can't accurately translate what we see to "oh that's 230 nanometer wavelength" no we can't so let people tweak it themselves.
Thank you this helped me so very much!
Yo this actually helped me a lot man found out a lot of things that I “”should”” be running just one question when is the dcs settings guide
Surely fr33thy makes a DCS one
Thx for putting the commands in the description!
future frame rendering makes your game a bit more smooth but make it have more input delay
right on time dude thanks
Interesting how you can't see enemies' red names on green backgrounds but choose to have a red crosshair
The reason for that is every other colour was giving me weird hitmarker colours in heli. I want purple ideally
@@SilkOCE same here. I went with yellow…
Upgraded to a 5800X3D from a 10700K. Went from 80-100 fps to 160-200fps… I can’t believe my eyes 🥺
@xperia 3080ti
lucky... i am still on a 2600... have to play at 4k just to play without stuttering
some people need to understand, that depending on your computer and the game, running graphics on Low can actually make the game run worse. On my 1650, ive noticed that i get better on 2042 with medium graphics than i do with low.
Good settings but for me personally on rtx3070, I have textures set to ultra, texture filter on high, nvidia image scaling sharpening to 40% in the nvidia control panel. Lose 2 fps with this setup but the visibility is SUPREME.
Interesting. I might trial some different settings for vis but with a 3080Ti on 1440p I don't actually have much GPU headroom
@@SilkOCE I used to play in low @1440p but found it was too blurry at long ranges. Those setting I used fixes that with hardly any performance drop. Just try it, you probably lose 1fps :)
Thank you man, I'm so dumb when it comes to settings lol
Thanks bro!
Thank You so much! The console commands were the final piece I needed to get the game playable!
My graphics are so weird like my render distance seems so off things look blurry from far away and they won’t look clear until I’m up close
Great vid thanks helped a lot!
I'm not here for the frames, getting +130 in ultra, i'm here for a better visibility, like in dark places n dark skins for example
yea
okay
Future frame rendering increases input lag by design. Keep that off and use dlss instead to gain some fps. Also low graphical settings will affect visibility in especially long range.
This was very helpful, big thanks!
Half expected Benny hill music playing while showin multiple newest PC parts being added to a website's cart... 😜
why does the texture of everything looks like shit and grainy, I feel like my hits tickle people, i feel like im always not hitting my targets even though i clearly am but, i have random bullets feeling like gravity is just yanking them down or go completely off into space.
Nice bro. Major difference for me.
Give these settings a chance..... I went up 40 to 50 kills with bots (advance level). Now is time to try online with real people xD
0:25, man just landed and you ripped his ass xD
can't believe you've done this bro, lost 20 FPS, kids crying thanks x
How do you more the kill feed from top right to bottom left?
If you have a 144Hz monitor, put that lock on 142/143 FPS. It's better for muscle memory. I'll issue 200 FPS as useless, you have to wait for the server response anyway.
What's your source for fullscreen having less input lag? That used to be the case in older versions of windows, but in newer versions of 10 and 11 borderless fullscreen is the preferred way to play as it has been optimized to have the same input lag as fullscreen from my understanding (and thats how it feels).
Yeah with the new optimized way of using the flip model it should be similar unless there is a issue specially with the game.
depends on what is on your desktop, if you use borderless fullscreen and use a fcking 4K 60 fps movie as wallpaper that shit will also be loaded the entire time, looking at all those weird weebs with their half naked anime bitch as background.
If you have a basic bg and your desktop isnt over filled with shit there shouldnt be much of an inpact, but there is one should be minor tho, but noticeable at least for my part
Used to be the case for dx11 and older games, not anymore with dx12
ay ty ty man :D
Just played a few hours on default and was only getting 60-70 fps. After your recommendations and applying another guys cfg I'm getting 120+ and that "uniform soldier aiming coefficient to 0%" part is night and day for my aim. I can actually hit targets now...
Hello Silk, what about the new settings Shadow Filtering
new sub G
ty!
Hey Silk, just curious - with your sensitivity settings are you still rocking 1600 DPI? and 6/20 windows Mouse point speed?
That what I been running amd is been going great since I switch to 1600 dpi 6/window
yep 1600 dpi and 6 windows
Is the in game fps counter shown in this video an external tool? The fps counter I get is the ugly ass one on the right side of the screen.
I can not believe you aren't using DLSS. I keep DLSS on balanced. Game still looks good and I get a HUGE FPS boost. Using a 13600k with a 3070 and it pushes me to about 165fps. If I put DLSS on performance the game starts to look worse but I get over 200 FPS...
This Settings are Awesome, what do you say, i have a 4090, is all of low and dlss off here good? what do you mean because the visibil of the enemies.
POGCHAMP I can finally go pro
how did get your in game colors like that in the beginning of the video? Is that from Gforce Exp page and what are the filters for it
bro u forgot to show your hud settings but thanks for everything else please could you do an update of your in heli hud settings where you have it closer to middle when u get chance thanks
Using Sweetfx helps with visibility too.
lost about 20 fps but it was way more consistent an smooth so its a win in my book
Ur game looks alot more colourful or does it just look like it
Does the console settings save if it type it console? Or I most type in those commands everytime I start up game?
Thanks bro
I thought uniform soldier aiming is based off the height divided by width of your moniter?
I've stopped watching when i saw all graphics settings on low.
Cmon mate..
vSYNC makes my game smoother
how do you change your mouse bindings? everytime i click mouse section to keybind it autoselects mouse 5
Why would you turn off DLSS if you are looking for higher frame rates?
I find it to be distracting and when I tested it there was no gains
How did you get those more vivid colors in the game?
ハイライト: 15:20
Thanks!!
Whenever I’m in a jet I have to drag my mouse a long way across my pad just to make turns how can I fix
what gamemode you are playing?
how do you change the keybinds cause i literally cannot make my mouse settings like you have or how i want cause it wants me to make everything left click for mouse
Hate people who staright away set everything on low for the sake of competitive experience. I want the game to look as good as it plays, plain and simple. Why the hell did i pay for an rtx3070 if i wanted to play a game on low settings😊
hey Slik what fps counter is that ?
what are you running. copied all the settings and running a 3080ti 5800x and custom settings with most high to very high and get 120ish fps and with your settings get 235-140 not sure how your getting 168 fps
Future Frame rendering doesn't work in this battlefield
The highest FPS I have is in non combat and its 16 FPS, the highest FPS I got in combat is 6 FPS. And its very clear for me that enemys are nerby because my FPS drop and I when I aim I have 2 FPS.
What do you do to increase saturation? Colors are more vivid in your game
We will never know. I’m guessing he just edited the videos saturation
Hello, try changing them from nvidia control panel if you want it applied to games
Try changing it on the nvidia control panel or you can use digitalvibrance which I use on all games.
@@rudyceehee8738 change in control panel or digital vibrance
In nvidia control panel-digital color smth like that called options -to max at right need change).
Are you sure that 1.5 on 1600 dpi is 34cm/360?
the settings helped a bit, but my game still gets heavy frame tears in high action areas sadly
Change in my documents/bf2042/profsafeprof(opened with notepad), then find under render and change value from 1 to 0 ..enlighten to 0, shadow quality both setings to 0, dx12 set to 1, and significant quality set to 0...you will lower graphic quality by little,not much,but this config will give you great boost and you would be able to play it without tearing
Just noticed your windows mouse setting is 5/10 not 6/10 I wouldn't touch it now, but.. :)
Shouldn’t matter as I have raw input on but thanks I’ll double check!
Also windows mouse should be /11 not /10
How did you change your main screen background?
take a shot every time "objectively" is said
Absolutely smashed by the end
So is the game worth getting now?
gonna try and see if this work. im playing with Ryzen 7 2700X - Radeon Rx580 Nitro+ 16GB RAM and there are moments where my game goes to 10-20 fps or something. only game its happening at :/
Please do a video on console sensitivity please mate
I play on 32x9 can you tell me how you got your hud more closely together
Guys I got problem its my first time playing this game my problem is when I want to go back to menu after the match it will stay black screen but sometimes not always but it s so annoying any solution pls
Hi can someone help me with this problem that I am stuck in a empty lobby when ever I start my game it’s been a month. What should I do
I literally cannot play this game with any settings. I have RTX 2060 i5-9600k 16gb ram and all i can get is 40fps and it doesnt even feel like 40fps and it feels like my ping is like 300 but i know its really like 30. I have tried every setting..
Must be your CPU overheating ngl, try turning on future frame rendering
Get a better cpu
I personally just can't play without at least high Texture Filtering and High AA because If I play at lowest settings there are literally several cm big squares around the edges, on top of that the games seems to be rendered in 480p. I don't know what kind of fucked up spaghetti code Dice released in this installment but even with all settings Ultra without DLSS or any upscaling the game looks like it is rendered in 720p and then upscaled to 1080p. Very frustrating
if i turn the DLSS on i got like 35 more fps...but the image its a bit blur even if i go for quality why is that?
rtx cards: ffr off, dlss on, reflex + boost
i dont see the sense of playing with more fps than better graphics
How to move minimap more to center?
how do you bind yaw to mouse? Nothing happens when i move my mouse
Just a thought. Could it work to put those console commands in the PROFSAVE_profile? I mean i reads other settings from there.
How do I lower the sens while I'm knocked
So you still can't turn off AA?
I hate it...
how do you run reversed vertical for jet and standard for heli? it seems to toggle both at once
How did u enable fps counter
which mode is this
Can you add the commands for the console in your description?