How to Block Sand PRIMER (Like a PRO!!!!) * For Beginners*
HTML-код
- Опубликовано: 26 авг 2024
- In this video I show you how to block sand primer on this 1968 Camaro using homemade sanding blocks with 600 grit sandpaper. This is the method that I have used for 18 years, and it works very well!!! This process works well for sanding filler as well using coarser grit sandpaper. Once you learn the blocking process you can be more confident on getting super straight body work. I hope yall enjoy this video, please Subscribe, Like also Share out this video. The link for the products is listed below. These are affiliate links for my amazon account, they are available to you at no cost. When you click on my link and purchase a product the channel receives a small percentage of the sale. Have a blessed day God Bless AC Designs Garage.
mirka dry guide coat amzn.to/3yFpSau
3m 600 grit wet dry sandpaper amzn.to/3J2ek5O
3m soft sanding block amzn.to/3q7P7y9
paint stir sticks (to make the stiff block) amzn.to/3sjwYA5
Gopro hero 10 black amzn.to/3yGgJhP
scott shop towels amzn.to/3p9B9MY
Just want to say thank you that for the tip for the paint. Sticks. I actually had one and I put it against the side of my quarter panel right near the wheel arch and I've been blocked sending it and it's kind of tricky right there. So l ended up doing the tip you. Had explained about the paint stick and it showed me a couple of high spots. And so I thank you for your help.
Awesome so glad it helped!!!!
Yeah, I also seen a quick brief.Look at one of your videos how you show how you mix paint cans with a saw pretty cool
can you tell me all the grits you used from start to finish thanks
Yeah no problem, here are all the grits from start to finish 80, 180 ,320 ,600 wet. Here is the full process, we blasted the car then I 80 grit the car all over then put epoxy primer on, then started the body work. I would sand with 80 where I would put filler then block it with 80grit.next step before primer I block it with 180 grit. Next high build 2k primer it heavy then 180grit block then primer it again then 320 grit, next finally 600 wet lol. Thanks for the question!!!
Very nice work I subscribed look forward to more
Awesome, thank you for your support!!!!!!
Great video! Makes me want to get me '69 Z28 back on the road. I shouted you guys out tonight at the end of my video. Have a Merry Christmas!!!
Awesome get that thing out and burn up the road!! I subscribed to your channel ,cant wait to watch some of your videos!!!
Hope yall have a Blessed CHRISTmas!!!!!
@@ACDesignsGarage Thanks! I'm gonna put some serious time into it over the holidays... Hope to do a first start video...
@@ACDesignsGarage God bless you and the same to you... We need to keep Christ in Christmas!!!
@@EdgeofEternityBillCameron thanks brother yes we do!!!!!
great video!
Thank you very much !!!!!
Great video. Can tell you spent the time on body work as smooth as that primer sands out. Do you just spray a single coat of 2K primer for the 180 grit then another single coat for 180 & 320 to finish? Thanks for taking the time to show your process.
Thank you!! It usually works out that way. If you can get it straight with out cutting through the primer with the 180 you can do it all in one heavy coat, I prefer to hammer it heavy, block it as straight as I can get it then hammer another 2k on then 320 it then step up to 600 wet then go to a coat of sealersealer
Hello sir. Appreciate the video. If you're answering questions, I got one for ya... I'm done with my body work and ready to spray the final coat of primer for finish sanding. Do you thin your final coat of primer? I can't imagine sanding it with 600. Did you say you started with 300?
Thank you for the question!!! This is how I usually do all my body work/primer.#1 first coat of primer over raw body filler, I like to spray a light coat of flat black spray paint to use as the guide coat to show the lows and s ratches, I sand it with 180 grit on a block till its flat. #2 highbuild prime again, I cut the top off with 180 then switch to 320 grit dry on a block with guide coat till no imperfections show up.#3 highbuild prime the last time, I cut it with 320 dry just to get the peel out then use 400 to 600 wet on a block with guide coat to get all scratches out. Then shoot a coat of sealer then start painting. I usually never over reduce the primer. Sorry if this was to long, hope it helps!!!
Thanks so much for the great reply! I have a follow up for ya- So I've got my final coat of urethane primer sanded to 400. In your opinion, how important is a "sealer" coat at this point? It must go on awfully smooth to not have a need to sand it before spraying base (I would imagine but have no clue). @@ACDesignsGarage
Nice!!,What was the brand name of that guide coat you used? Thanks.
Mirka, i put a amazon link you can click on in the description below if you want to check it out. I love this stuff but its messy lol. Thanks for the comment 👍
And people wonder why a good paint job is 10-20k its a lot of WORK.
Hahahaha so true. They call it body WORK for a reason lol.
Thankfully there are good folk like you that help make it a little less so. Just found your channel today and I'm very thankful since I also will be doing a '68!
@@Huskeroni awesome glad to have you in our little hot rod family, feel free to request anything you'd like to see, ill try to make it happen!!!