I love Kira and Athrun ,my favorite sence of Gundam Seed is in episode 40, when the ship Kusanagi is launching, Freedom hold on to the ship then reach his hand out to catch Justice. Another sence is when Kira and Athrun stand face to face to each other, behind them is Freedom and Justice, that's epic
I have this guy...I just haven't had much time to build him. I also have strike freedom but it is a pain in the ass to try and pose...especially with the wings. On mine, not sure if it's done this with everyone else, the wings would always wind up flopping down, falling off, and pieces went everywhere. Great review for the original Freedom. Now I know what I'll be getting into when I finally build him.
If your looking for something to be played with, you can always get the Freedom Gundam MSIA, which is basically an action figure roughly 1/144 size, but less detail that you would get from a model since these are mass produced.
Dear rrobbert 184 i love your review of the mg freedom it is one of my favorite mg's besides the mg god, wing, destiny. Just 3 month's ago i bought the ng freedom gundam since then i have been working on getting the mg freeom gundam
The 1/100 non-grade Freedom Gundam actually does have the gray parts on the head. i was quite impressed with that. tho overall i'm glad my sis got it in a grab-bag and gave it to me for free...i miss the full burst mode :(
The peg connecting the wings to the back pack tend to be quite fragile. It's probably the highest stressed point of the whole kit. Mine 1st broke on the left. Repaired it with superglue. Then the other side broke. It's now in a fixed pose, never to move again!
awesome review! also, I have a question. how are the Wing joints? i mean, in my HG 1/144 Freedom, the joints that are attached to the back, started to weaken already on its 2nd month, which is really disappointing.
when I look at this and than look at my custom painted MG Wing Zero "Hikaru Special" on my shelf, I really wanna kitbash and make a hybrid I did a sketch of years ago :p
whats the main difference between the freedom and the strike freedom besides the strike having 2 beam rifels that differ from the freedoms single beam rifles, and the wing design?
@TK4541 Well the Strike freedom is much worse in that aspect. And the railguns are actually railguns since they did not penetrate phase shift armor in the series. And remember this series was made with the purpose of attempting an attempt at something similar to the Gundam Wing series, yet at the same time be a huge mix of previous gundam series for various reasons.
I made this in 5 hours..It was really worth the time. Nothing really wrong...but on mine the right arm seems to be not fully in place...and i tried to push the arm in the socket as much as i can but no luck ;d Stickers for the rifle absolutely suck...so i just colored it with a blue gundam marker..and IT LOOKS JUST AS GOOD :D
I noticed that my infinite justice mg's forehead(Small red part) has a small words "ZGMF-X19A" however the freedom does not have it:(( isit an error on bandai or the freedom kit is just old?
The Strike Freedom has the more appealing build and colors, at least in my opinion. the Freedoms wings look cooler, but the Strike Freedoms wings have detachable funnel/dragoon lasers, which is always cool. I personally prefer the look of the Freedom, but even so the Strike Freedom does have the higher cool factor. I hope that helps.
@suburiboy you should watch seed, some hate the story, but one thing is for sure, Music and gundam designs are pretty much up there on the number 1 list.
Well, frankly speaking. One time i was passing by a department store which sells the Gundam Model kit. I saw the 1/100 No Grade Force Impulse Gundam from GSD for the first time. I take a look at it, i was like, is this somehow the "upgrade" of Freedom? Because, the design of its body, but different color, was similar to the Freedom!
i have built the realgrade version of the freedom gundam, only one problem. The shoulder armor pieces are VERY loose. You could shake the model and the armor would turn sideways XD
i like your reviews theyre awesome! you forgot to mention that the sabers can combine! (looks like the darth maul light saber from starwars) other than that awesome!
PLEASE RESPOND! What is your favorite 1/144 model? I accidentally bought a stand for a 1/144 and don't want it to go to waste. I got it from Amazon and don't want to go through the hassle of shipping it back!
@Seekingtrue ok one in gundam seed the dragoon sysyem used by the providence was a hard to control system and the freedom barly beat it and in gundam seed and seed destiny there were only 4 gundams made with a dragoon pack so not everyone could use it they were used by strong pilots only acception to that is the akatsuki and he was able to use it cuz it was a diff operating system made for naturals and it was only one sided on the grunt suits not against the destiny witch thats how i think a
do you think you can open that certain part of the leg and super glue it. you probably get mad sometimes when ever you try to pose it. oh and i'm not a real fan of gondum by the way. but i still think thier cool
@steveMCHS then you obviously didnt pay attention to the "new" dragoon system, which was stupid because the computer did all the work and didn't involve piloting skills at all.
5:31 "The grey is built in, but if you buy the 1/100 you dont get the grey i beleive." Im confused, the reveiew is for the 1/100, isnt it? Does the grey already come on the head peice?
I'm planning to buy one this christmas.. can somebody help me. I want a burst mode freedom gundam.. like this one here.. what I must consider first ? any suggestion are acceptable. thanks ! :) have a nice day !
Hope you ended up being happy about getting your wish but i guess i hope more you didn't die within the 3 years of you posting this and you replying...
i finally got around to built the freedom yesterday :P it was an incrediby underwhelming build in my opinion. it was just boring, nothing special at all. that might be because i have built some newer MGs though. and it has quite a lot of flaws! the ankles are extremely lose, the connection between the torso and the waist is too lose when you have the back pack on and its generally awkward to pose... i fully painted it though and put on the decals, that way it looks very awesome on my shelf^^
i love how the lining is so simple, yet well placed, it just looks perfect!!!
We need a MG Freedom Gundam ver. Remastered for 2014
+김건우 I can't wait for the 2.0 to come out
now 2018 and the 2.0 is very amazing
Rrobbert184: The railguns are actually the guns located at the hips and the ones on the wings are the plasma cannons.
This was my first MG, and its a really good one for that because it does not need a whole lot of panel lining to look amazingly good.
I love Kira and Athrun ,my favorite sence of Gundam Seed is in episode 40, when the ship Kusanagi is launching, Freedom hold on to the ship then reach his hand out to catch Justice. Another sence is when Kira and Athrun stand face to face to each other, behind them is Freedom and Justice, that's epic
I have this guy...I just haven't had much time to build him. I also have strike freedom but it is a pain in the ass to try and pose...especially with the wings. On mine, not sure if it's done this with everyone else, the wings would always wind up flopping down, falling off, and pieces went everywhere. Great review for the original Freedom. Now I know what I'll be getting into when I finally build him.
If your looking for something to be played with, you can always get the Freedom Gundam MSIA, which is basically an action figure roughly 1/144 size, but less detail that you would get from a model since these are mass produced.
The Full Burst Mode variant of this was my first MG kit and it was actually really easy for me, just took a bit longer than I do now with MG kits.
Dear rrobbert 184 i love your review of the mg freedom it is one of my favorite mg's besides the mg god, wing, destiny. Just 3 month's ago i bought the ng freedom gundam since then i have been working on getting the mg freeom gundam
Splendidly done! This is by far the best video you've done so far.
5 stars...
This is a great kit , I am building this one now and it is turning out nice.
The 1/100 non-grade Freedom Gundam actually does have the gray parts on the head. i was quite impressed with that. tho overall i'm glad my sis got it in a grab-bag and gave it to me for free...i miss the full burst mode :(
The peg connecting the wings to the back pack tend to be quite fragile. It's probably the highest stressed point of the whole kit. Mine 1st broke on the left. Repaired it with superglue. Then the other side broke. It's now in a fixed pose, never to move again!
yeah, the hip cannons are railguns.
Xiphias railguns
Took me 11 hours to build but it was all worth it. I enjoyed every moment of it
@Seekingtrue it still takes piloting skills cuz it is still tricky to use it even says that when your first see the the legend gundam
i have a tip for the booster for the legs in front like the outside part of the booster colour it gray
rrobert184, the "seals" that you mentioned are applied with water? or the decals are the ones that need water?
This is soo awesome, so all of the parts are snap together? no glue required??
I just bought the limited edition. cant wait to build it
Nice review on the model. One thing I wanna point out is that the guns on Freedom's wings are positron cannons, not railguns.
This gundam is easily the best design in the last decade.
awesome review!
also, I have a question. how are the Wing joints?
i mean, in my HG 1/144 Freedom, the joints that are attached to the back, started to weaken already on its 2nd month, which is really disappointing.
I love this suit but I don't know if they have a ver 2.0 in the works. They did for the Strike.
awesome!
thanks alot! also, its a single joint right?
I really want this kit, even If It Is old, I actually prefer older kits to the newer ones because they are much sturdier.
when I look at this and than look at my custom painted MG Wing Zero "Hikaru Special" on my shelf, I really wanna kitbash and make a hybrid I did a sketch of years ago :p
whats the main difference between the freedom and the strike freedom besides the strike having 2 beam rifels that differ from the freedoms single beam rifles, and the wing design?
the old videos are way better without having so much parts , just the review in one video
@TK4541 Well the Strike freedom is much worse in that aspect. And the railguns are actually railguns since they did not penetrate phase shift armor in the series. And remember this series was made with the purpose of attempting an attempt at something similar to the Gundam Wing series, yet at the same time be a huge mix of previous gundam series for various reasons.
i keep imagining the build srtike with the backpack of the freedom
where do u get ur gundams? im a big fan of both the show and the models, but it is really expensive in the area that i live in.
do u still need something like super glue or cement ? do u still need crafting tools just for this set ??
I made this in 5 hours..It was really worth the time.
Nothing really wrong...but on mine the right arm seems to be not fully in place...and i tried to push the arm in the socket as much as i can but no luck ;d
Stickers for the rifle absolutely suck...so i just colored it with a blue gundam marker..and IT LOOKS JUST AS GOOD :D
Can I ask? Is it possible for the Lupus Beam Rifle to be attached to the back of the Freedom?
my first MG was Heavy Arms EW and it was fairly easy IMO just alot of inner frame work as far as the legs and i love him to death haha
I noticed that my infinite justice mg's forehead(Small red part) has a small words "ZGMF-X19A" however the freedom does not have it:(( isit an error on bandai or the freedom kit is just old?
The Strike Freedom has the more appealing build and colors, at least in my opinion. the Freedoms wings look cooler, but the Strike Freedoms wings have detachable funnel/dragoon lasers, which is always cool. I personally prefer the look of the Freedom, but even so the Strike Freedom does have the higher cool factor. I hope that helps.
@rrobbert184 after watch this and watch again and again ,again i wanna ask,,are you put the decal ???for awsomenness
Am I better to get the mg freedom gundam or the mg strike freedom gundam? Which would you recommend moreso?
@suburiboy you should watch seed, some hate the story, but one thing is for sure, Music and gundam designs are pretty much up there on the number 1 list.
hey i saw the gundam seed series but i forgot who pilots the freedom , i think it was kira and if so, how did he get this mobile suit? lol i forgot
I think it'll be the easy kit from MG that good for beginner. Although the blue wing are floppy but i think this is the good kit for beginner
robert what the diffrent betwwen MG and 1/60 freedom??
I saw another MG Freedom Gundam at a local toy shop
Something like a seed destiny varient, Is that new?
trying to decide between freedom and force impulse which one is better?
What did you use to line the panels? which pens?
im not sure which to get. This MG Freedom, or the MG Strike Freedom Full Burst mode?
Will the MG Freedom Wings fit on the MG Strike Freedom?
does the freedom MG has the same height as the strike freedom MG?
Well, frankly speaking. One time i was passing by a department store which sells the Gundam Model kit. I saw the 1/100 No Grade Force Impulse Gundam from GSD for the first time.
I take a look at it, i was like, is this somehow the "upgrade" of Freedom? Because, the design of its body, but different color, was similar to the Freedom!
@Seekingtrue how is it a rip off of the hi nu gundam because they both have a dragoon systems and there blue?
Can I please have an personal opinion. Which fundamental looks cooler freedom or freedom strike? Plzz answer
im super confused on whether i should get mg freedom or mg strike freedom fbm
I built mine in 7 hours! Not counting the still unapplied decals. :3
are they hard to do or easy
no, the upper (Waist) body just rotate left and right, the newest version of MG have a lot of mobility in the waist
i have built the realgrade version of the freedom gundam, only one problem. The shoulder armor pieces are VERY loose. You could shake the model and the armor would turn sideways XD
how do u paste the zaft sticker? Wet and paste? pls tell me 0.0
this is your best vid and review by far awesome job sir
i like your reviews theyre awesome! you forgot to mention that the sabers can combine! (looks like the darth maul light saber from starwars) other than that awesome!
So you don't have to paint a MG?
@raiser188
different in scale and MG have internal skeleton. 1/60 don't have.
is the shiny verison good?
5 Stars man, great review, makes me more excited about getting my own when it arrives :D
About how much extra detailing did the model need?
PLEASE RESPOND!
What is your favorite 1/144 model? I accidentally bought a stand for a 1/144 and don't want it to go to waste. I got it from Amazon and don't want to go through the hassle of shipping it back!
@Seekingtrue ok one in gundam seed the dragoon sysyem used by the providence was a hard to control system and the freedom barly beat it and in gundam seed and seed destiny there were only 4 gundams made with a dragoon pack so not everyone could use it they were used by strong pilots only acception to that is the akatsuki and he was able to use it cuz it was a diff operating system made for naturals and it was only one sided on the grunt suits not against the destiny witch thats how i think a
do you think you can open that certain part of the leg and super glue it. you probably get mad sometimes when ever you try to pose it. oh and i'm not a real fan of gondum by the way. but i still think thier cool
@steveMCHS then you obviously didnt pay attention to the "new" dragoon system, which was stupid because the computer did all the work and didn't involve piloting skills at all.
did anybody use superglue for the innerframe and the wings?
Where do u buy gundam at
5:31 "The grey is built in, but if you buy the 1/100 you dont get the grey i beleive."
Im confused, the reveiew is for the 1/100, isnt it? Does the grey already come on the head peice?
Can't wait 2 build it but need 2 wait till Dec. ;(
keep up the good work please tell me where u can get them plz plz plz
Full burst mode? U forgot to split the dark and blue panel of wings
@sammers587 you dont need any tipe of glue or cement
this gundam is so beautiful
ill get this along with Nu Gundam Mg
I really wish a mg freedom gundam Ver. Remaster!
I'm planning to buy one this christmas.. can somebody help me. I want a burst mode freedom gundam.. like this one here.. what I must consider first ?
any suggestion are acceptable. thanks ! :) have a nice day !
@6Baltej6 yes. all master grades, real grades and perfect grades have cockpits.
I just bought this one.my top right top wing keeps falling apart lol help
Tre Tucker super glue....
he doesnt come with beam sabers?
+jaycolewwe he does
+blinktv909 ok cool
@TK4541 how is it over powered for no reason
RG kit has better details and color separation, I wish they make ver. 2.0 for this MG.
I see... I don't have RG kits. Too much details on a small unit and looks somewhat toyish.
Hope you ended up being happy about getting your wish but i guess i hope more you didn't die within the 3 years of you posting this and you replying...
because the dragoons don't work on earth in Gundam Seed. The wings would give him more weapons on earth. Just a thought.
@IceyTea95 : all master grades are in 1/100 scale. and the 1/144 ones are high grades nowadays.
It´s fun Because Freedom Head have The Strike Gundam Head Layout,Which is nearly impossible because ZAFT Never Acquired the Strike Gundam
even if this kit is kinda old its badass badass
I wish I had enough experience to be brave enough to build this... haha. I've only built 2 HG kits so far.
the clear parts one just comes with an extra box with clear armour parts
why did you own a kyrios
@Lollerman117 MG Freedom the Strike Freedom was just a replacement for the freedom-.- I hate the Dragoon update
Is there MG Justice? not Infinite Justice...
i finally got around to built the freedom yesterday :P
it was an incrediby underwhelming build in my opinion. it was just boring, nothing special at all. that might be because i have built some newer MGs though.
and it has quite a lot of flaws! the ankles are extremely lose, the connection between the torso and the waist is too lose when you have the back pack on and its generally awkward to pose...
i fully painted it though and put on the decals, that way it looks very awesome on my shelf^^
have u noticed that that gundam and gundam zero are quite alike kindof
where are you?
@steveMCHS the Hi-Nu has funnels not dragoons. And it is a rip off because the concept is pretty obviously a reimaging the design from the Hi-Nu.
i strated whit a 00Q ive got 6 new mg till that day they are easy
we really need Ver 2.0 FOR MG FREEDOM GUNDAM
I like Strike Freedom, but my favorite gundam is Rx-78-2 from Mobile Suit Gundam 0079; I like gundams looking that way.