Dude, beautiful truck! FYI - that coolant pipe can absolutley be removed with the engine/trans still in, just pull the valve cover off and you can access the bolt that holds the pipe to the head, then you have to find the two bolts underneath the intake plenum and it should come right off. That pipe uses an o-ring to attach to the intake, you can pick one up at LC Engineering for cheap Can't wait to see more of this truck man, keep up the good work!
I’ll have to look into that, I figured it might be possible, but man I REALLY didn’t want to take that intake off again after needing to swap because of the broken bolt. I’m glad you’re enjoying the truck so far!
I’m envious. Which says a lot since I currently have a 2024 F150 RCSB 4X4 V8 - Lifted with some additional nice mods. I love my F150 but years ago I had an 88 Toyota 4x4 truck. My wife told me not to sell it but I did not listen. She was right. I’ve regretted it ever since. I had an 06 Tundra for 16 years and an 18 4Runner for a few years and even got my daughter an 07 Tacoma for her first car. But I’ve always missed that damn 88 Toyota. Great job. I’m looking forward to future videos.
I went to a local junkyard and got the bench seats and console out of a same model 4runner for 100 and put them in my 93 instead of the split bench. Way more comfortable and you only have to make a slight modification to the mounting brackets to get it to work
That stuck bolt reminded me of the nightmare I went through a few months ago to remedy a broken lower suspension arm bolt. At first I tried different bolt extractors with heat applied which also ended up braking and made the situation worse because those extractors are made of hardened steel. So I ended having to buy a titanium tipped drill bit set to drill it and the bolt out from the other end. Which then required having to order a titanium tipped tap to tap new threads. From that experience I learned that I would had been better to just gone straight to drilling and tapping the moment I felt the bolt extractor not budging the bolt.
same shit happened to me on my 02 Camry. It needed new struts on the rear and the bolts for the lower (control arms? not quite sure what the right name is lmao) bolts were VERY STUCK on the left side. pipe on a torque wrench? nope. impact? nope. chisel? nope. blue flame torch? nope. finally, an angle grinder was the last ditch effort that just barely got them to move. not quite sure what actually caused them to be THAT stuck but it was a multi-day problem
Stoked! Great intro video! I’ve had a 94 ext cab that’s been my daily and basically a farm truck and I’m ready to dig into it and fix some things up and dial it in. It’s moving past farm truck and into something I get an offer on almost every time I drive it. Need to take care of these old trucks!
Hey man, I just found your channel recently and have been super impressed by the quality of your videos. I would’ve guessed you had hundreds of thousands, if not millions, of subscribers! Keep up the great work and I can’t wait to see you go far on this RUclips journey!
I love my 93 2wd, I had to do some work to it cuz it’s had some abuse. But she runs good now. Either way the 2wd I was very satisfied with how it handled. Put on some beefy shocks and she will corner. My plan for it is to put an LS1 with the 4L60 in it. I have the not so common auto trans that has a giant slipping issue. When it’s colder then 35 out it won’t even go into gear until it’s warm.
We bought one brand new at Beck Toyota in Greenwood Indiana in 1993, same exact truck. At 247K it developed a transmission problem, sure wish I had have kept it. Great little truck.
I battled with a sheared off bolt in my 22re Tstat housing just a couple weeks ago. Snapped my extractor off in it, too. After burning up multiple metal drills bits, I ended up using a ceramic/glass drill bit and it cut through the bolt almost effortlessly. I re tapped and helicoiled and all good.
Love your energy and positiveness, thats a good looking clean project truck, if there’s one person who can fix the truck it’s you, you know your trucks, hope you can get it running right.
I just keep the way it is , just fix the interior. Good job. Love watch your videos. i have had my eye on one of these trucks for a very long time, but not luck😢
My dad used to have a truck exactly like that. My whole family called it lil’ red and I would love to get another one so I could have a lil red of my own
Dude, can I like this video twice? lol Great find, so happy to hear you plan to keep it as your daily. I had a 93’ in green that originally belonged to my dad, it was 2WD though. I hope you restore the paint and polish a bit.
Second video I've watched and you're giving me the confidence to buy one and fix to keep myself lol definitely afraid of head gasket job but I think I could do it
Those early HiLuxes are magnificent vehicles. Here in Australia I had a dual cab 4x4 for 7 years, only repair was a radiator A$165. Teenage daughter wrote it off on a dirt road using a tree as a brake. 😢
! Dashcam (Front+ inside + Rear Camera), LED Front Light Upgrade: Lasfit, Auxbeam, Novsight etc But the All in one option that looks just like a Normal Bulb with everything Built in like the Fan and LED Drivers etc So you don't have to fuss with with extra Wires and the box. Fix the AC While you can, It's a MUST!, Light Tinted Glass A Wallmart Stereo Upgrade with some cheap but decent speakers, radio and Subwoofer. If there is Budget Left, Maybe some Auxillary lights like a Lightbar or ditch lights etc.
recline ranch old bolts&aluminum don't play well drill and tap timekeep on wrenching love the old toyotas projects great production great channel my friendly dave st portland, oregon
if I would have just drilled it out completely I probably could have gotten it out, but after the easy out broke off in there the hardened steel of that made it almost impossible to drill any more.
@ like I said I had a 85 22R and a 4x2 92 22RE. I have to say I have first gen Tacoma with 346K. That should say something about those motors too. That Tacoma has by passed the other motors I did have
I recently subscribed to your channel and I’ve been hooked. Even watching a lot of your previous content. Love your enthusiasm for the old trucks. This one is solid like you said. Looking forward to your 2025 content!
The 1990s Toyota had the best body style the only thing that I would add to this truck is maybe a roll bar with some lights on it great job putting it back together your positive attitude and the way you stay calm no matter what is awesome
TRY TO GET A JAPANESE HILUX CHROME OR BLACK ROLL OVER BAR CAME FOR LN 107 AND LN 109.. WELL SORRY IT MIGHT NOT AS IT IS DESIGNED TO MOUNT OVER THE FENDERS IN THE BED AND YOU GOT AN EXTENDED BED.
I've always wondered why the parking lamp housings are flipped between the two-wheel drive and four-wheel drive version of the pickup. I kind of like the look of them when the four-wheel drive versions better.
@@redlineranch. Yeah my dad had the '92 red two-wheel drive version and a guy at our church had a '94 dark gray 4x4 version and as a young child Even though both were single cabs, I much preferred the front end look of my dad's friend from the church's pick up and it was also cool having to step up higher to get into it.
I like the way it is right now, I've never owned a toyota pickup but I'd drive that one. I wouldn't change anything. Just fix the interior up as much as you can and drive the wheels off it.
I hear you, it’s got that classic look to it, the next thing on the table for this truck is getting the engine mechanical completely wrapped up and cleaning up the interior as best as possible!
@ you can do it... build you a really nice one.. take your time.. no rush... you build it' one part at A Time.. you know where they go. I wish I had your Car knowledge🍀😀
the R series is great, but nothing is truly bulletproof. The reason the 22RE got such a legendary reputation was because the 3.0 was so bad. The Nissan 4 cylinders of the same era as well as the ford 4 cylinder from pre '95 was also just as reliable in my opinion.
Nice 1993 4x4 Toyota Truck ! What is the yellow car? Citroen Deux Chevaux (Two Horses)? I see the previous owner left their Service Manuals - nice ! I used to have the two volume service manuals for my 1993 4x2 Toyota Truck also.
It’s actually a Subaru 360! I plan to build it on the channel, but it’s on the back burner right now, it’s on Suzuki samurai solid axles and I’ve been building it for about 5 years now off and on, but mostly off lol it’s probably only got two or three weeks of actual work into it and it’s just been sitting other than that
With the termostat cover issue and the leak from the heater hoses prompted me to take a look at my own 5th generation Toyota Hilux and l did chane the thermostat on my Hilux for a 95 degree one when it did have an 85 degree termostat is because 5 yea4s l had to change the radiator the original one sprung a leak driving home one time and the radiator is more efficient than the original one and my Hilux ran cool even in 40 degree days with the air-conditioning running and l don't have a fan shroud and my Hilux still runs cool even with the air-conditioning running as for the hester hoses both come in and out the left hand side of the block and look very easy to access maybe the original heater hoses l don't know if its something to do with the fact that l live in Australia and as you know we have right hand drive and on the lefy hand side there is not much but the right hsnd side is crowded with the brake and clutch master cylinders and the carburator also the steering column
id leave that truck bog stock how you have it and just use it as a daily driver with the odd bit of 4wd. either that or go all out and do a trophy truck like build on it
i have the same truck, 91, wish it had better paint but it only has 161k miles and runs perfectly. i really dont wanna get rid of it. its rust free but its so slow
I’m working on it! I should have some soon, I want to make sure its quality and worth while before I try to sell any! Have any design styles you would like to see?
@@redlineranch. I really like the hoody in your video. It’s simple and not too over the top. Plus it’s like free advertising for you lol! Solid channel man I love it
@ sweet! I appreciate the feedback, I want to make sure whatever I put out is stuff that people actually want to wear and is also quality enough to stand up to being worked in!
Dude, beautiful truck!
FYI - that coolant pipe can absolutley be removed with the engine/trans still in, just pull the valve cover off and you can access the bolt that holds the pipe to the head, then you have to find the two bolts underneath the intake plenum and it should come right off. That pipe uses an o-ring to attach to the intake, you can pick one up at LC Engineering for cheap
Can't wait to see more of this truck man, keep up the good work!
I’ll have to look into that, I figured it might be possible, but man I REALLY didn’t want to take that intake off again after needing to swap because of the broken bolt. I’m glad you’re enjoying the truck so far!
@@redlineranch. He's right, you can pull that line. 1/4 drive wobbles are really helpful for the connection to the manifold.
I’m envious. Which says a lot since I currently have a 2024 F150 RCSB 4X4 V8 - Lifted with some additional nice mods. I love my F150 but years ago I had an 88 Toyota 4x4 truck. My wife told me not to sell it but I did not listen. She was right. I’ve regretted it ever since. I had an 06 Tundra for 16 years and an 18 4Runner for a few years and even got my daughter an 07 Tacoma for her first car. But I’ve always missed that damn 88 Toyota. Great job. I’m looking forward to future videos.
id love more details - such as time spent on each vehicle, costs, etc. I think that's interesting to hear!
Love your Can Do attitude young man!! Keep on kicking ass in life! Timmy C Arizona
Thanks! anything is possible if you just commit and set your mind to it!
Uhh buy a. Chase tap from auto parts worth the bucks to use factory fresh torque specs
@@gerry-p9x the bolt was broken in the intake before I got the truck unfortunately
@redlineranch. Yeah bummer sometimes worth it just pitch the part and used good used one
I went to a local junkyard and got the bench seats and console out of a same model 4runner for 100 and put them in my 93 instead of the split bench. Way more comfortable and you only have to make a slight modification to the mounting brackets to get it to work
@@JHamSandwhich did that mid 60s. With Chevelle pulled buckets outa. Corvair and into car
That stuck bolt reminded me of the nightmare I went through a few months ago to remedy a broken lower suspension arm bolt. At first I tried different bolt extractors with heat applied which also ended up braking and made the situation worse because those extractors are made of hardened steel. So I ended having to buy a titanium tipped drill bit set to drill it and the bolt out from the other end. Which then required having to order a titanium tipped tap to tap new threads. From that experience I learned that I would had been better to just gone straight to drilling and tapping the moment I felt the bolt extractor not budging the bolt.
Use repeated freeze thaw cycles of dry ice and heat buy chunk co2. And let doak
same shit happened to me on my 02 Camry. It needed new struts on the rear and the bolts for the lower (control arms? not quite sure what the right name is lmao) bolts were VERY STUCK on the left side. pipe on a torque wrench? nope. impact? nope. chisel? nope. blue flame torch? nope. finally, an angle grinder was the last ditch effort that just barely got them to move. not quite sure what actually caused them to be THAT stuck but it was a multi-day problem
Stoked! Great intro video! I’ve had a 94 ext cab that’s been my daily and basically a farm truck and I’m ready to dig into it and fix some things up and dial it in. It’s moving past farm truck and into something I get an offer on almost every time I drive it. Need to take care of these old trucks!
Hey man, I just found your channel recently and have been super impressed by the quality of your videos. I would’ve guessed you had hundreds of thousands, if not millions, of subscribers! Keep up the great work and I can’t wait to see you go far on this RUclips journey!
Yes, he is very good.
I love my 93 2wd, I had to do some work to it cuz it’s had some abuse. But she runs good now. Either way the 2wd I was very satisfied with how it handled. Put on some beefy shocks and she will corner. My plan for it is to put an LS1 with the 4L60 in it. I have the not so common auto trans that has a giant slipping issue. When it’s colder then 35 out it won’t even go into gear until it’s warm.
We bought one brand new at Beck Toyota in Greenwood Indiana in 1993, same exact truck. At 247K it developed a transmission problem, sure wish I had have kept it. Great little truck.
I battled with a sheared off bolt in my 22re Tstat housing just a couple weeks ago. Snapped my extractor off in it, too.
After burning up multiple metal drills bits, I ended up using a ceramic/glass drill bit and it cut through the bolt almost effortlessly. I re tapped and helicoiled and all good.
Love the vid, you get right to the point and get it running. You don't drag it out. Another great vid! Love that truck. My favorite yota by far.
Love your energy and positiveness, thats a good looking clean project truck, if there’s one person who can fix the truck it’s you, you know your trucks, hope you can get it running right.
Thanks for the encouragement, this one is a real sweet looking truck, I'm gonna tackle it one step at a time till it’s dialed in!
Esperamos más videos de tu bonita adquisición 👍
Saludos desde 🇲🇽
I just keep the way it is , just fix the interior. Good job. Love watch your videos. i have had my eye on one of these trucks for a very long time, but not luck😢
full driveline in working order is incredible ! i want one so bad
Great project Toyota and glad it is beeing saved😎🇳🇴
My dad used to have a truck exactly like that. My whole family called it lil’ red and I would love to get another one so I could have a lil red of my own
Dude, can I like this video twice? lol Great find, so happy to hear you plan to keep it as your daily. I had a 93’ in green that originally belonged to my dad, it was 2WD though. I hope you restore the paint and polish a bit.
Second video I've watched and you're giving me the confidence to buy one and fix to keep myself lol definitely afraid of head gasket job but I think I could do it
Man I want a truck like that ! I miss my 1990…..should have never let it go !
I live watching these videos. Keep up the good work.
some bucket seats and a decent stereo and its good to go. i daily the same truck (1990), they are best little trucks you can get
Love the videos! I just got a 92 Toyota pick up with a TDI swap. Almost identical to this truck just white.
Amazing job as always. Just waiting for that long road trip on that one !
Those early HiLuxes are magnificent vehicles. Here in Australia I had a dual cab 4x4 for 7 years, only repair was a radiator A$165. Teenage daughter wrote it off on a dirt road using a tree as a brake. 😢
Super classic truck. I'd keep it the way it is. Nice job man!
You and Steinfab should do a collab
that could defiantly be cool!
Needs a safari bar lights. Roll bar killer. Stereo w nav system😊😊
Very cool truck. You did a great job.
There is that Stout for sale in the San Luis valley. I am sure you've seen it on marketplace.
I have seen it, its a little out of my price range, but man is it tempting!
been watching you and I am so amazed at how much you know and are able to fix the problem, ,,,,,,,,,in Roswell
! Dashcam (Front+ inside + Rear Camera), LED Front Light Upgrade: Lasfit, Auxbeam, Novsight etc But the All in one option that looks just like a Normal Bulb with everything Built in like the Fan and LED Drivers etc So you don't have to fuss with with extra Wires and the box. Fix the AC While you can, It's a MUST!, Light Tinted Glass A Wallmart Stereo Upgrade with some cheap but decent speakers, radio and Subwoofer. If there is Budget Left, Maybe some Auxillary lights like a Lightbar or ditch lights etc.
Great find! Get the interior complete-ish and It’s perfect as is. Love those scsb with camper shells for the pups. 🤘
Thanks, it's definitely going to be a fun build, first up is definitely getting the interior wrapped up as best as possible!
Full rebuild on this little truck. From the chassis all way up.
recline ranch old bolts&aluminum don't play well drill and tap timekeep on wrenching love the old toyotas projects great production great channel my friendly dave st portland, oregon
if I would have just drilled it out completely I probably could have gotten it out, but after the easy out broke off in there the hardened steel of that made it almost impossible to drill any more.
if the tap dont disappear its pretty common that the 22r and re worn timing chain guides can give that tapping sound.
Thanks for that! Looks very promising.. 🖐🏽
Great episode! Brought back wonderful memories of my ‘90 4x4. What a fantastic truck. Where can I get a Hilux hat like that?
Awesome video I learned a lot 👏🏽👏🏽👏🏽
You got this thing Running before A 28:44 Video was Over..👻😄
That’s always the goal!
22R and 22RE are legendary. Had an 85.
I agree, they are legendary
@ like I said I had a 85 22R and a 4x2 92 22RE. I have to say I have first gen Tacoma with 346K. That should say something about those motors too. That Tacoma has by passed the other motors I did have
Awesome decision for a project truck!
I've got a '92 with a 22r, 4x4, that switched out to bucket seats and automatic with console.
I recently subscribed to your channel and I’ve been hooked. Even watching a lot of your previous content. Love your enthusiasm for the old trucks. This one is solid like you said. Looking forward to your 2025 content!
Thanks for the sub! Glad you’re enjoying the content! I’m working on some cool things for 2025!
Put running boards on it, they look great with them!
Running boards could be a cool look for sure!
That truck is an awesome find.
I know, I was pretty happy about it!
cool vid I bought one of those brand new in 93 I still miss it You gotta put a roll bar on it bro
The 1990s Toyota had the best body style the only thing that I would add to this truck is maybe a roll bar with some lights on it great job putting it back together your positive attitude and the way you stay calm no matter what is awesome
Thanks man! I'm always trying to stay positive and enjoy the process. The roll bar and lights look is a classic for Toyotas!
TRY TO GET A JAPANESE HILUX CHROME OR BLACK ROLL OVER BAR CAME FOR LN 107 AND LN 109.. WELL SORRY IT MIGHT NOT AS IT IS DESIGNED TO MOUNT OVER THE FENDERS IN THE BED AND YOU GOT AN EXTENDED BED.
Been loving your videos dude. Keep posting!
More on the new/ old truck I want to see you pull that motor 👍
nice video dude keep it up and i wish you a happy and nice new year
Wow! Quite the jigsaw puzzle! That generation of Toyota PU definitely was the Pinnacle.
It's definitely one of the best generations! Luckily I know them very well so I had a good idea of how to put it together!
I've always wondered why the parking lamp housings are flipped between the two-wheel drive and four-wheel drive version of the pickup. I kind of like the look of them when the four-wheel drive versions better.
That’s an interesting one, it’s probably just a styling thing, but the 4x4 definitely look better in my opinion
@@redlineranch. Yeah my dad had the '92 red two-wheel drive version and a guy at our church had a '94 dark gray 4x4 version and as a young child Even though both were single cabs, I much preferred the front end look of my dad's friend from the church's pick up and it was also cool having to step up higher to get into it.
That red is gorgeous 😍
ISNT IT! this truck looks SOOOO good!
Hydrolocking -- is the word of the day :D
That’s a scary word!
AC!!!! Definitely AC. And a double Din touch sceen Android Audio and Apple carplay Stereo 😮😊..
That's a great idea, and I’m sure AC would be a game changer! I'm thinking about getting a new radio for it sooner than later!
@redlineranch. ruclips.net/video/ZhJ3PzJGLAU/видео.htmlsi=SMU3T8dGK1a7FPxZ
THATS A VIDEO ON HOW TO DO IT
I like the way it is right now, I've never owned a toyota pickup but I'd drive that one. I wouldn't change anything. Just fix the interior up as much as you can and drive the wheels off it.
I hear you, it’s got that classic look to it, the next thing on the table for this truck is getting the engine mechanical completely wrapped up and cleaning up the interior as best as possible!
You need a big white marker board above the work bench.
Love these toyota pickup vids
Thanks! I really enjoy making them too!
while heating the snapped bolt always douse it in PB blaster to cool it, then heat again and so fourth
Good thought! I’ll try that next time
You can Make it run.. We believe in you. We have seen your auto mechanic skillz... Your on the A-list... not joking or being sarcastic.🍀🍀🍀🍀🍀😀
Thanks for the support, it means a lot! I’m just trying to build the coolest Toyotas possible and make the best content possible while I’m at it!
@ you can do it... build you a really nice one.. take your time.. no rush... you build it' one part at A Time.. you know where they go. I wish I had your Car knowledge🍀😀
Wipe on some Vice Grip clear coat.
Love the video happy for you bro 💯👍great job on the editing and voice over 👍
Glad you enjoyed it! Always looking to improve the editing and production, its all about making everyone better than the last!
great vid, although I did shed a tear when you disengaged 4WD and kept driving without unlocking the hubs.
Man I’m jealous I would buy that truck from you … you can’t find those around here anymore they are all gone and rusted, keep up the great work!
Thanks man! I'm really enjoying working on it and hopefully it will turn out great!
Just stumbled on Video! This is awesome cool
Always look forward to seeing your videos
Love these old Toyotas. Unfortunately they are long gone here in Nova Scotia, Canada, or any other north east region
Yeah, it’s pretty sad haw easily these trucks rusted away, it’s definitely one of their worst traits
I love the 5th gen pickups.
I thought it was the 3.0L V6 that had the head gasket issues from that era? The 22RE is supposed to be bulletproof?
the R series is great, but nothing is truly bulletproof. The reason the 22RE got such a legendary reputation was because the 3.0 was so bad. The Nissan 4 cylinders of the same era as well as the ford 4 cylinder from pre '95 was also just as reliable in my opinion.
Love the videos that you make, keep up with the amazing work. You could put a V8 or an supra engine in it, and a pre-runner kit on it as well.👍
Thanks! A V8 swap sounds like a ton of fun for something!
5:17 "absolutely rust free" *looks at my rusty Hardbody from Virginia*
Me: Must be nice 🙃
Nice 1993 4x4 Toyota Truck ! What is the yellow car? Citroen Deux Chevaux (Two Horses)? I see the previous owner left their Service Manuals - nice ! I used to have the two volume service manuals for my 1993 4x2 Toyota Truck also.
It’s actually a Subaru 360! I plan to build it on the channel, but it’s on the back burner right now, it’s on Suzuki samurai solid axles and I’ve been building it for about 5 years now off and on, but mostly off lol it’s probably only got two or three weeks of actual work into it and it’s just been sitting other than that
Rollbar and overhead lights!
Pioneer Bluetooth radio with kicker speakers, a 2 inch exhaust with high flow cat and flowmaster flow fx muffler
I like where your head is at!
love those trucks....hard to find 4x4 in decent condition.
Great work!
Nice pickup
With the termostat cover issue and the leak from the heater hoses prompted me to take a look at my own 5th generation Toyota Hilux and l did chane the thermostat on my Hilux for a 95 degree one when it did have an 85 degree termostat is because 5 yea4s l had to change the radiator the original one sprung a leak driving home one time and the radiator is more efficient than the original one and my Hilux ran cool even in 40 degree days with the air-conditioning running and l don't have a fan shroud and my Hilux still runs cool even with the air-conditioning running as for the hester hoses both come in and out the left hand side of the block and look very easy to access maybe the original heater hoses l don't know if its something to do with the fact that l live in Australia and as you know we have right hand drive and on the lefy hand side there is not much but the right hsnd side is crowded with the brake and clutch master cylinders and the carburator also the steering column
id leave that truck bog stock how you have it and just use it as a daily driver with the odd bit of 4wd. either that or go all out and do a trophy truck like build on it
my old boss drove an old Toyota t100, that thing could climb like mad
13:11 the mechanics sisyphus enbodyment.
I'm willing to pay to have mr Redline Ranch clean shaven! Yeah!
Or even just a trim
A bit ironic that someone named Harry wants someone else to shave
Hahahah noted!
The kid's great, but that beard is about as patchy as an old ATV tire!
i have the same truck, 91, wish it had better paint but it only has 161k miles and runs perfectly. i really dont wanna get rid of it. its rust free but its so slow
They can definitely be pretty darn slow especially compared to modern cars, but man are they sweet trucks!
You do realize you have the SR5 instrument cluster. Not the cluster that came with this truck!
I was wondering if you sell these trucks after you finish fixing them 🤔
I got a 94 toyota pickup from old folk with 71 thousand miles on it 5 speed but only 2 wheel drive for 1000 dollars!!!
Happy New Year
Happy New Year to you too!
grailed toyota pickup. super sweet video
I’m so glad you enjoyed it! I’m pumped about this truck
Why aren't you running red coolant?
Good stuff
Put a light bar on it
This truck is epic man! Do you sell merch? I’d love to buy a t shirt
I’m working on it! I should have some soon, I want to make sure its quality and worth while before I try to sell any!
Have any design styles you would like to see?
@@redlineranch. I really like the hoody in your video. It’s simple and not too over the top. Plus it’s like free advertising for you lol! Solid channel man I love it
@ sweet! I appreciate the feedback, I want to make sure whatever I put out is stuff that people actually want to wear and is also quality enough to stand up to being worked in!
roll bar and lights
That’s always a classic Toyota look!
I'm looking for a 4×4 toyota 5 speed with blown motor
At 212,000 that's a decent deal.
If the red truck body wasn’t in such good shape I would think body swap with the blue hilux ,,,
That’s a good thought! A 4x4 hilux would be SWEET!
Ran and drove ended up putting starter in it!!
That is sweet!
thanks! im super excited about it!
I have one just like that . But needs a motor.
Do u do rebuild motor for other people.