15 years of intrusion/card access/camera installs and tomorrow I'm programming my first dmp xr150/550 (that's what the box says) so thank you for this helpful video
Hi, In the communications section, is DD (digital dialer) or Contact ID where I would enter the phone number for my central station? I am looking at possibly taking over the monitoring for one of the Fire alarm Panels.
Thanks for explaining each step. Do you have any video for zone setup for motion sensor? Looks like I mis configured it and now my system is always in not ready state.
if you program zones 1-10 they wire to the main control board but if you are above that if depends on if you have your expansion on the keybus or the LX bus where to put the zone is the hardest thing to learn on this panel. using the LX bus is the easiest if you program the expander to 00 that would start your zones at 500. If its on the keybus if you address it to 05 the zones would start at 51-54 but you have to program the device in device programming if its a 8 zone expander both 05 and 06 would be set to a expander. you more than likely have if programed to the wrong zone keybus zones are in groups of 4 if it is a 8 zone expander the first 4 would be 51-54 the next 4 would be 61-64 if you use the LX bus it is easier to keep track of and you wouldn't use device addresses. but the expander would need a seperate wire wiring to the LX bus DMP allows you to wire expansion zones multiple ways to help the installer.let me know if this clears up your issue
I have a building with a 150fc, I need to access the programming code. Any idea how I can get that without calling the company that installed it and get charged out of the nose to have them change the program code. Will a reset put it back to factory default?
Hey Alarm Shark- Thanks for this video. I've been out of the business for 20 years, but recently purchased a home with an XR150 that is not programmed properly (motion detectors are set up as perimeter devices). I need to change the programming, but the local dealer wants $500 minimum service call. Any chance you know someone who could help me through it via phone for $$? Thanks
thanks! Ive worked with honeywell longer than DMP but I put DMP in my house for a reason, It's wireless is superior and the XR panels can do access control a much better system. Nothing wrong with honeywell its dependable. DMP is simple once you work with it I have other videos check them out and please subscribe!
I worked in a school big district and all they used was the xr550 with a bunch of zone expanders/734s, push release door buttons, HID proximity sensors,etc....But the most annoying thing was they want everything on a schedule and constantly change their mind what times they wanted. Or people would conflict with others. They wanted these local alarms installed by the entrances of the doors, so if I kid went out, they would know about it. And then they'd want them deactivated because it would disrupt the teachers , and then they would want them to reactivate it, and disconnected and reactivated
Thanks for this. I’m a DSC tech and just started working for a company that is a DMP dealer. This helps.
Same
15 years of intrusion/card access/camera installs and tomorrow I'm programming my first dmp xr150/550 (that's what the box says) so thank you for this helpful video
Thank you. You can support the channel by subscribing thanks
Thanks for taking the time to add the table of contents so I could get exactly where I needed to. Very helpful video!
Was doing my 1st XR 550 today, watching this vid was helpful Can’t say thank u enough Looking forword for the advance program
How did that Project go?
@@lowvoltageghost888 It went pretty good got everything working as it should
Great video I'm also an installer, you made my day with zone descriptions in panel. Never thought to Hit the soft keys to get the letters to come up.
Thank you. You can support the channel by subscribing thanks
a lot of help for a 1 year tech. nice refresher for some small things. very interested in the advanced programming video that i’m going to watch now..
Thanks for watching. Subscribe for future content
Love the step by step approach, and in depth detail with programming. Thanks for the tip..
I have other vids on this panel check them out and please subscribe
Nice video! 👍🏻
Helpful and very well done! Thanks for posting it.
Appreciate the videos. Its a nice refresher as a low voltage tech.
No problem. Sub for more future content have a good day
Wow man you are the best ! Bless your soul
!
Great video. Very informative.
Thank you
I am getting mine tomorrow! :)
I chose this panel for my house as in 25 years its my favorite panel
Excellent video
Thanks I have others on this panel please check them out and subscribe
Looks more user friendly to program than Honeywell panels.
It is especially with Alpha
The video is excellent 👍
thanks I am planning to make a video of it doing access control
Wow! Thank you sir
you are welcome
Wow thankyou. Looking for advance programming of DMP setup
It is available thanks for watching
Looks like 1980s tech! Reminds me of Radionics!
Great job man!
Thanks I have others on this panel please check them out and subscribe
Done
Hi,
In the communications section, is DD (digital dialer) or Contact ID where I would enter the phone number for my central station? I am looking at possibly taking over the monitoring for one of the Fire alarm Panels.
Thanks for explaining each step. Do you have any video for zone setup for motion sensor? Looks like I mis configured it and now my system is always in not ready state.
if you program zones 1-10 they wire to the main control board but if you are above that if depends on if you have your expansion on the keybus or the LX bus where to put the zone is the hardest thing to learn on this panel. using the LX bus is the easiest if you program the expander to 00 that would start your zones at 500. If its on the keybus
if you address it to 05 the zones would start at 51-54 but you have to program the device in device programming if its a 8 zone expander both 05 and 06 would be set to a expander. you more than likely have if programed to the wrong zone keybus zones are in groups of 4 if it is a 8 zone expander the first 4 would be 51-54 the next 4 would be 61-64 if you use the LX bus it is easier to keep track of and you wouldn't use device addresses. but the expander would need a seperate wire wiring to the LX bus DMP allows you to wire expansion zones multiple ways to help the installer.let me know if this clears up your issue
I made a new video just for you ..advanced zone programming check it out and subscribe for future content
I have a building with a 150fc, I need to access the programming code. Any idea how I can get that without calling the company that installed it and get charged out of the nose to have them change the program code. Will a reset put it back to factory default?
My DMP XR, 20 on the keypad when I said it to perimeter when it’s on the countdown, it beeps like it does in all mode. How can I fix that?
How can we get remote notifications from the unit? Their software (APP) requires a login.
Can I email you a question?
Hey Alarm Shark- Thanks for this video. I've been out of the business for 20 years, but recently purchased a home with an XR150 that is not programmed properly (motion detectors are set up as perimeter devices). I need to change the programming, but the local dealer wants $500 minimum service call. Any chance you know someone who could help me through it via phone for $$? Thanks
Did you get any help? I am in the same boat
how do you set the time?
That is in the User menu hit command until you see the menu
How do I delete the password 99 In the dmp 500
looks more user frindly to program than hneywell panels
For sure yes..especially with codes and alpha programming
Old Honeywell Service Tech ..... DMP is my weak spot .... You make it look simpler ...😅
thanks! Ive worked with honeywell longer than DMP but I put DMP in my house for a reason, It's wireless is superior and the XR panels can do access control a much better system. Nothing wrong with honeywell its dependable. DMP is simple once you work with it I have other videos check them out and please subscribe!
I worked in a school big district and all they used was the xr550 with a bunch of zone expanders/734s, push release door buttons, HID proximity sensors,etc....But the most annoying thing was they want everything on a schedule and constantly change their mind what times they wanted. Or people would conflict with others.
They wanted these local alarms installed by the entrances of the doors, so if I kid went out, they would know about it. And then they'd want them deactivated because it would disrupt the teachers , and then they would want them to reactivate it, and disconnected and reactivated
The video is excellent 👍
thanks