DJI Digital FPV - My Overview, Thoughts + Menus & Settings
HTML-код
- Опубликовано: 13 сен 2024
- Taking a look at the new DJI Digital FPV System for FPV Drones and giving you a complete overview as well as looking at the settings and menus.
To Support the channel you can use the below affiliate links to order the DJI FPV System
DJI Digital FPV System click.dji.com/...
Bangood DJI FPV www.banggood.c...
Order a Secretlabs Chair you can get it from bit.ly/2QFJ2YL
Bangood www.banggood.c...
Amazon DJI FPV amzn.to/2TZqMMw
Mad’s Product Pic’s Amazon Store www.amazon.com...
Thank you for watching and please do Subscribe, Like and Share our videos, we have over 150 videos on this channel talking about many things DJI, Drone and RC so please do go check them out. Above are some affiliate links to the products seen in this video and some trusted vendors. If you have found the video useful I would be grateful for your support by purchasing via these links, this adds no additional cost to you and it help us to keep making videos like this one.
Finally I have been asked for other ways for users to support and they are listed below too.
Support us on Patreon / madrc
Paypal Donate mad_rc@icloud.com
Follow us on Twitter now @madrc1
Thank you for your support its massively appreciated and again please do subscribe, like and share.
Music: www.bensound.co...
#DJI
#FPV
#Droneracing
#Ocusync
#Drone
#Photography
Hi Everyone, I hope the info in this video has been helpful to you, I would really appreciate it if you would subscribe to the channel. If you would also like to support me in what I do below is link to the DJI Digital FPV System on the DJI Store, this is an affiliate link and by using this you are helping me continue to run my channel and keep making videos like this.
click.dji.com/ALwcdoCMalut8lJpGkIA9w?pm=link&as=0001
Thank you for watching and as I said please do Subscribe, Like and Share :)
I have released an FCC hack for this, see my other video here
ruclips.net/video/u0e0mB6EEyY/видео.html
I also just want to confirm some things on this I did not go into detail on in the video around CE and FCC Modes.
The System Range DJI State upto 4km in FCC Mode and 0.7km in CE Mode, Region setting is not user selectable and is set by DJI Assistant for FPV Series automatically when you connect the system, your location is detected based on your internet connection location.
Can I change from FCC to CE after its been set ?
Yes, If you move to a FCC location from CE simply turn on your Goggles and Air unit and allow them to connect and display video, connect the Air unit to DJI Assistant for FPV Series and it will detect if your internet connection location is in a FCC Country and it will change to FCC Mode automatically.
How can I tell if I am in FCC or CE ?
FCC Mode has 8 Available channels, CE Mode has 4.
Can I use the new DJI FPV Goggles with DJI Drones ?
No, the new goggles are only designed to be used with the new FPV Air System only.
Can I Use DJI FPV Goggles with Analog ?
Yes however there is no analog receiver in the goggles and you would have to connect to an external receiver to the goggles via AV in.
Can I use my own RC with the DJI FPV System ?
Yes you can use your own receiver and transmitter as long as they are on different frequency’s.
Can I manually switch between Mode 1 and Mode 2 on my DJI FPV Remote Controller?
Yes. However, it is not recommended. By detaching the remote controller and manually switching between Mode 1 and Mode 2, you will not be covered by DJI official warranty if the remote controller were to break.DJI offer two flight modes for you to choose from when purchasing the DJI FPV Remote Controller, Mode 1 and Mode 2.
Is the DJI FPV Air Unit compatible with third-party cameras?
No, Only the DJI FPV Camera is compatible with the system.
What Flight controllers are compatible with the DJI FPV System ?
Any controllers that supports SBus and UART with MSP on Betaflight, to use the new DJI HDL 7ms RC connection you need Betaflight 4.1.0 for HDL and telemetry via the MSP Protocol.
So it will be very easy to switch the system to FCC mode: Just use an VPN to the US and connect the system to the DJI assistant, right?
The activation is a 1 time thing right? Does it have internal clock battery that will prompt you to reactivate after a certain no of days and or update to a new fw?
@@Guilefpv this
No once activated it done.
@@MadRC So there's no problem ordering from EU vendors i guess?
I just received my set of DJI, connected to US via VPN, launched app, and activated all components to 700mW without any issues :) GL :)
Its good to see a company like DJI interested in FPV. Can only be a good thing.
EU Stock is now available as of today click.dji.com/ALwcdoCMalut8lJpGkIA9w?pm=link&as=0001
Very thorough. Thank you!
Thanks, all my questions answered, nice and concise.
Amazing, you covered every detail and it didn't became boring ... briljant! ¶ ;-)
Help so much great man
I'm very interested in the RC settings mode. Instead of diving into BF, it appears you can do it ALL in the goggles! Is that the case?? If so, can you do a more detailed dive into those settings?
It’s basically communicating with Betaflight so there are none in the RC it’s self and it’s all setting the BF controls via the goggles menus. Great idea for a video thanks.
@@MadRC Agreed! No one I know of has really delved into a 'soup-to-nuts' DJI goggle exploration.
Yea, Checkered Flag Films, I’d also like a deeper explanation on that.
Really good and detailed review. Is it possible to get the full 4 kilometer range if a unit is purchased and registered in the UK, but flown in the US on a trip there, or is it permanently locked to the CE 0.7 kilometre range?
Im 1 year late, perhaps it still helps you. You can change it up to 1200mw altought its illegal. 700mw is also switchable and its super easy.
Beeeeetah flight
Great review
Thank you 👍👍
Thanks
Mad RC Do we need the DJI remote controller in order to change PIDs and Rates etc via the DJI goggles? Or can we change them when using a Taranis and the DJI goggles?
How does the system check for the current location and did you find a way to get around the limitations?
ruclips.net/video/u0e0mB6EEyY/видео.html
Hello Mads Tech, thanks so much for putting out this video, I couldn’t find any good or useful info. on all the goggle menu options until I found your video, I too k 3 pages of notes writing down all the important options. The only one I’m not completely understanding is the POWER LIMIT, I’m just concerned that if I’m in the middle of a flight and the unit gets hot, will it just shutdown and leave me blind? If you could explain that function just a bit more I’d really appreciate it. Thanks again.
No it will never fully shut down unless it’s literally on fire. It simply reduces output or allow it to cool. We have had many years of use of this now and it’s not something you even need to be concerned with. It’s main goal is to stop overheating while on the ground.
@@MadRC Thanks very much.
Question... does it have quad audio to the goggles? I like to hear my motors. Thanks for the info and the vid, great job.
No sadly not.
i just got the setup and connected it to my quad. everything works but it only shows 1 bar of signal when the quad is right beside me. when i walk like 5 meters away, the connection totally breaks off. does anybody know what's wrong?
The antennas are plugged in..
great overview subscribed! 👍
Hello, What would Endpoint setting mean in the settings?
Comprehensive 👍
player channel 1-7 racing, 8 public whats the different? when i use public signal always not good
Thanks for going through the menu.
the variable latency that stingerswarm documented is a complete deal killer for me. (over 300ms)
even highish latency can be tolerable, but only if it is consistent.
thanks bruva,waiting on my controller for full set up,beginner btw cheers
No problem thanks man.
i'm getting a problem with my new setup where I cant get any signal to the goggles unless i'm literally 6 inches away from the drone. what would cause this SUPER weak signal??
That’s got to be antenna issues probably on the Air side imo. You have the two mounted correctly ?
@@MadRC figured it out, the air unit was not getting enough power
The DJI FPV Goggles systems is pretty easy to setup. But I’ve heard of a few issues, so just to be sure I’ve created this walkthrough of all the steps required to register the system then how to bind the DJI FPV Goggles and the DJI Remote to the DJI FPV Air module. Then my first impression upon seeing it the first time.
thank you for a very in depth video. one question. when the system is in CE version can you change the power up 700mw? and get the range of 4km without the hack.
How do you make the timer work on the goggle display? Mine shows, but not starting and working when i arm?
I heard we don't have to buy the full system. What should DJI fpv component or components should I buy if the only things I am missing are vtx, fpv goggles and antenna? You said it's compatible with most flight controllers. My flight controller is HyperLite F4 OSD. Will it work?
After connecting the goggles to the air unit and then connecting the transmitter, the goggles cannot be used when connecting to the air unit.
Do you know the cause?
Does the new dji transmitter come with a way to charge the battery? And it does come with a battery right?
Yes via USB C and it should have one in the pack.
你的视频介绍十分到位，好评！！！！！！！！！！！！！！！！！
Is there any gimbal control option in remote if i use this device on gimbal quad
Why can't they incorporate focus adjustment?
how dose it fly ?
Hello my friend, where are the batteries?
It uses an external Lipo
OSD coming?
Brilliant video. Just what I was looking for.
Do you mind me asking where you’re based? Sounds like a local accent to me. 👍
I’m south west Wales, just in Pembrokeshire:).
Mad's Tech Reviews & Tutorials lovely part of the world. I’m the other side in Cwmbran.
Keep up the great work!
H i Mad RC,
I have a question, if you have more than 1 air unit , will the DJI Goggles automatically connect to the one that you have turned on, assuming that the air units have been bind with the Goggles
Yes auto switches between them
Hi. Great video, very well made
. I've got the dji fpv system and wanted to reverse a channel on my remote. I've got the system on a fixed wing aircraft, not a quad. I dont want to reverse the channel thru betaflight or inav. I need to reverse the elevator channel on the remote without connecting to a computer. Is it possible to revearse a channel thru the goggles?
Sadly no, all of the RC controls are handled via the autopilot with this system.
Sorry buddy, it looks like you covered this at 17.40. Excellent video by the way. Very concise and complete.... subscribed!
So I cant revearse the elevator channel from the menu shown at 17.40?
What is about Quad onboard Audio? I see no chance to get the live Audio from the Aircraft to a Headphone with this system.
Currently no sadly. At this stage we don’t know if it’s even possible in this system.
Is the quoted 54* FOV for 4:3 mode or 16:9 mode?
4:3
Care to demo the actual video on AV IN feature for 4:3 or 16:9 input source camera
Pal or NTSC input format also
I’m looking at this tomorrow. Will post a short video on it as soon as I have it working. Trying to find a cable that I know I have lol.
@@MadRC thanks ... I do have FuriousFPV dock king with good video module ... to have the video in good oled screen like Fatshark HDO is tempting as output it to new DJI goggle
@@SajaksFavorites DJI is making a 20x20 VTX this year, look forward to that.
@@joshuasterling2144 great
So a 50degree fov then? And only 700m range! Is it really that ground breaking? My 3year old Mavic transmits 1080p 10kms with head tracking to boot!
Mavic can not do 28ms latency though ;).
DJI Goggles Re output 1080p so how can the new goggles have better resolution at 720p
Goggles RE display is capable of 1080p however with the Air system resolution was much less and 480p was the main resolution with OK latency but still way more than this. .
The Digital System will do 720p at 120fps down to 28ms. So is higher in real world usage.
anti-fogging feature ?
There are internal fans and Air is moved around in the mask. It’s much better than the Original Goggles.
Could the fc have inav or just betaflight
Inav works for SBUS and basic Telem like pack voltage via MSP. You can also see the rate and PID settings via the goggles however you can not change them like in BF.
@@MadRC so i could use this system with the flight controller matek 405 wing use inav i just can change any settings
Thanks for sorting out the misunderstandings about 25mW EU and 700mw for everyone else, don't feel like buying a € 1100 system and then, with some luck, deceiving DJI with a VPN address, possible or not? Like buying a new BMW ..... to find that it is restricted to 60mph.
Man I want a drone so bad but I can’t afford it 😔
If ur interested in FPV ... I would recommend a FlySky SM600 simulator controller along with the DRL Simulator... will just set u back about 20 USD
A ready to fly option for those who don’t want to build. www.iflight-rc.com/index.php?route=product/product&path=20&product_id=1017
I don’t think dji test the unit for fit on many people. Everyone I’ve seen reviewing it states very poor fit and lots of light leakage.
I am seeing a little but it’s nothing that bothered me tbh.
No conection between nazgul evoque and controller I see icon in goggles all binded but betaflight cannot do anything.... Rubbish 🤮
CE limits these goggles greatly - shame
how are these limits enforced?
Based on your gps location
@@speedbird737 Thanks! Which part of the system has the GPS unit? I thought it wasn't used for anything in an FPV system.
E. Malkin I’m assuming there’s a GPS receiver in the googles or flight receiver simply to determine the location in the world the goggles are being used so the FCC or CE restrictions (by law)can be applied. So if you took the googles and flight receiver to USA you would get a range of 4km! Only 0.7 km in EU/UK
@@Anonymous9683 You need to activate the unit before using. I assume it took your gps or the IP address of the laptop.
The problem is the latency its horrible on this system and the range the further you go the worse it gets . I wouldnt take this for free look at all the videos on it it done already this was dji last attempt
Have you actually used the system ? Yes with all systems latency can change with digital however I would base opinion on what you have actually used and not what people think.
@@MadRC yup freind has it