Configuring SNMP, Packet Tracer v.7.2
HTML-код
- Опубликовано: 9 мар 2019
- ruclips.net/user/MrSaleh9...
download packet tracer's source files:
drive.google.com/file/d/1-0x4...
SNMP
What is SNMP and how it works?
SNMP works by sending messages, called protocols data units PDUs to devices within your network that speak SNMP, using these requests, network admins can track virtually any data values they specify, all of the information SNMP tracks can be provided to a product that asks for it.
It is widely used protocol for monitoring the health and welfare of network equipment.
MIP Management information base is a data base used for managing the entities in a communication network, most often associated with the simple network management protocol, the term is also used more generically in contexts such as in OSI/IOS network management model.
Here in our network, we have to networks, the interfaces facing the switch are configured.
Configure SNMP:
On Router1:
snmp-server community read ro
snmp-server community write wr
On Router2
snmp-server community read ro
snmp-server community write wr
On the PC
Go to the MIB browser
On the address bar type 172.16.1.1
On the read community bar type read
On the write community type write
Snmp version 2
Then click ok
On the snmp MIBs tree
Expand the tree by clicking on the arrow
MIB tree
Router_std MIBs
.iso
.org
.dod
Internet
Mgmt.
.mib-2
System
Here you can click on the sysUpTime,
Make sure operation on the upper right is set to GET and then click GO.
This would tell you how much time the system was up
Highlight the system, then click GO, this would show the system name.
Clicking on the interfaces, then highlighting innumber, this would show how many interfaces for the system.
If you click back on the sysname, then click on the operation and scroll down to SET, a window will pop up,
On the data type, choose cotetstring, then on the value bar type the desire name you want for the router, for example R1, then hit ok, then hit go, it will change the router name to R1.
On the physical router, click enter, you will notice it changed the hostname to R1.
Do the same on Router 2.
Thanks a lot, I really benefited much from this video .By the way, this the area description of my graduation project ,you can add videos if possible more with a complex topology
Thanks mate. Finally a simple explanation with an example. Good work!
Thanks for this. Just finished my A+ and working on Network+ but using packet tracer for labs.
Grüße gehen raus an Saggi
Really good vid. Thanks for the walkthrough!
Thanks. it helped me a lot
Thanks For This Info
helped alot ! Thanks
Big thanks !!!
Thank you so much
انت فخر للعرب
THANK YOU
Thank you
I get an error that says, "SNMP Commad Error No such name error". I followed every step that you shown in the video. Both my RO and RW have the same community string. What did I do wrong?
thanks..
how do you generate an snmp trap and notification
You just saved my test-taking ass
i have hard hemeroids
THis is wrong snmp v3 donot use community , snmpv3 needs user !!! auth priv !!
so how is this configured then? I keep getting error messages