THAAAAAAAANNNNNNK YOU!! I swear nobody cares about the 8th gen 2.4 Honda Accord I've been looking for a video like this for years! I bought my 2.4 '08 Honda Accord coupe in 2012 only to figure out there is nothing for it. All the aftermarket company are too cheap to try something like this and they only care about the Civic Civic Civic Civic ugh or the v6 Honda Accord coupe. They completely skipped over the 8th gen Honda Accord 2.4. Thank you man I cannot thank you enough for doing this!
you are the best at explaining things like B is for Build and i love this project. Just keep going because this project is personal to me. Really need all the help and knowledge i can get
Thanks Justaine! I'm excited to get this going since I drive my Honda the most out of all of my cars. I am hoping to enjoy the extra power day in and day out 👍
Just to share more technical knowledge about Honda's i-VTEC because I've got nothing better to do. Honda made many versions of their "i-VTEC" systems. The performance oriented i-VTEC incorporated valve lift and timing on both the intake and exhaust side. Engines like the K20A, K20A2, K20Z1, K20Z3, K24A2, and K24A3 have the performance version of i-VTEC. Some engines like the K20A3 and K24A8 only had "i-VTEC-E." Those engines don't incorporate variable valve lift, only a 12 to 16 valve switch over and variable valve timing. These engines usually produce more low-end torque and have better fuel efficiency. However, they don't rev as high and make less top-end power. In addition, their switch over is extremely early in the rev range and barely noticeable. There is another version of i-VTEC that incorporates variable valve lift, but only on the intake cam. Engines like the K24Z3 (like the one in this video) have this version of i-VTEC where VVL only occurs on the intake side. Both intake and exhaust sides still have VTC, so this systems sets itself in the middle of performance and fuel economy. You can generally tell the different K-Series engines apart by the intake manifold cover. If the lettering is red, then the engine has real "i-VTEC." If the manifold cover has black lettering or no lettering at all, it's most likely the "economy i-VTEC." Of course there's the head stamping to go off by too. I'd love to hear more facts from fellow Honda fans and enthusiasts. Thanks!
For those of us who don't scroll through all the comments, does anyone know what happened to the project? I was hoping to see the completed build and dyno.
Finally! I have a 9th gen civic si and I was looking into doing this and I can't find it anywhere, so thank you! Also I made 232hp 183tq on my 9th gen, k24z7 however I wanted to get on my exhaust and intake so I finally find you with all this!
I'm tuning a guy in Central America that has the K20z3 head on a K24z7 block. Making great power even with the stock Z7 oil pump and 1000ft above sea level. Made 233whp and 190tq on a base run. We're aiming for mid 240s by the end of it
Mannnn I drive a 2014 civic si , I want to do the exact same thing , the info on how to put a rbb vtec head is very limited, I’m glad I found your videos on RUclips ! How’s the build going ? Can’t wait to see the end result!!
Hey I was looking to upgrade my 2008 Accord, like you, I have some mild mods, tune exhaust intake mod and a street flywheel. Am looking forward to seeing this build
Make sure u use NGK plugs for this set up I read the part list you posted and I saw you are planning or planed on using BOSH spark plugs Honda motors usually perform best with NGK or Denso’s
ZunoFG4 it sounds silly but its true. I cant tell u how many times ive given several different types of bosch plugs a try and the engine always feels just a bit off. Back to ngk's or densos and u can tell the slight difference in the smoothness with which the motor revs and idles.
Sheldon Williams When you map it out it’ll be cheaper and wiser to sell your base and buy an Si. I suggest joining the 8th gen forum on Facebook to help you better understand why you don’t wanna do this
Glad you're making these videos! I just got curious on what it would take (price and difficulty) to build a Honda engine like this since I always hear people talk about it
Well the price is the biggest part of what you can and can't do. If money is no object, I'd be buying a billet K24 engine block, but they're upwards of $8k right there, and that isn't even touching internals. I have a sheet in the description box of this video that I will be updating as I buy parts and spend money towards this build.
Are you gonna be doing this to the civic eventually?, i am thinking about doing this to my 9th gen civic and having a video reference of the build would be awesome.
Just adding if you get 300 hp out of a 4 banger your doing good. Because on Nicks Garage (You Tube) from Montreal, Quebec he does a lot of V8 builds with forged connecting rods and pistons. Average Horsepower on his Dyno is 600 horsepower out of a V8. So your half of a V8 an 4 cylinder so if you where to get 300 hp (non turbo-ed or super charged) an Good accomplishment. Will be an interesting build for sure.
Well that shows the differences between the American Acura k-24 engines and our Australian accord euro K-24 engines-my 2011 accord euro cu2 luxury has the K-24z3 engine but it has vtec on the intake and exhaust cams unlike the K-24 in this engine. There are so many variants of this engine and are different in other countries. My wife has a 2006 odyssey with a K-24 A3 but in America you guys got the 3.5 v6 engine in them.
I know this is an old video, but 4 piston mentions that after porting the r40 head, it is the best flowing head out of all k series for all motor applications. You can actually add vtec cams on the exhaust side of the r40 head, and it’ll be better than the k20 heads and rbb (k24a2) head
Hi milan I have watched this video atleast 5 times now.. I have a 9th gen si that is why I very interested, how is the build coming along? Love you content man!
Looking to replace both cams on a K24Z3. The OEM cams (14110-RL5-000 and 14120-RL5-000) are $600 plus each. Are there any other less costly cams that will work in the K24Z3?
k24a2 with type s oil pump, vtc gear skunk ultra manifold with bigger throttle body and race header valve springs, 3inch exhaust and a 4inch intake on e85 will do 300whp reving it to 9k tuned.
Thanks for the list brother...hope to refer to it at first chance! These engines are simply amazing even stock, so i prioritized appearance and got the lowering springs, black halos, heavy tint and black Ruffino fivestars. Its all about contrast for me)) What else would you suggest look-wise Milan?
@@milanmastracci that sounds perfect, since thats the only paint chipping place on it . I kind of like how the black sunroof stands out, but i might actually give it a shot. Thanks
So far I like your videos. Idk why I never saw your channel but glad I did.. Question.. Why you chose the k24z3 with the hope of making 300hp with swapping the cylinder head of the k24a2 when you can simply use the entire k24a2 and just reuse the plugs of the sensors and extend the wires as needed. You can make 300hp all day with the parts your using inside of the a2. Just curious to know -Miguel -Migz 🍊range peel
Very good question Migz! There are a bunch of differences between the K24A2 and K24Z3 engine. I will be making a video talking about differences, as you cannot take one complete engine, and swap it into a different car. The K24A engines are the first generation K24s, and the Zs are the second gen ones.
@@milanmastracci as far as generation goes I'm up to date with that. I'm looking forward to seeing the video about it .. was just wondering as you can literally drop the A2 in just about anything lol in your case it should be just mount brackets I'm sure someone already did it .. In my case I have an older integra DA chassis going with a JDM k24a from a cl9 and using your same transmission in my case they say to change the inner casing for the 02-04 typeS transmission due to the VSS plug and what not.. but they already have an adapter for the plug for the 06-11 Si z3 trans VSS.. of I find some info on that hope you dont mind me sending it your way.. but none the less dude I love what you're doing -migz 🍊range peel
Just out of curiosity what would you wind up with by just swapping the head? My 09 Accord has about 65k miles on it. I was considering putting in a 6 cylinder l but I like this solution better. I'd also like to ask you for more details about upgrading the exhaust to dual. Did you need any custom parts or was it all Honda OEM parts? Thanks Tom USA
Thanks man! The transmission itself, you will need a nut for the transmission mount, and option speedo-corrector since the Final Drive and gearing is different.
Hey I was planning on building a k24z3 turbo for a DD, what do you suggest? Should I gut it and rebuild it or run it on stock internals? If I gut it what pistons and rods should I use? What type of valve/valve springs and retainers should I get? This is my first time building a motor so any suggestions or support is really appreciated. Thank you!
From my understanding, the V6 will have more low end torque even after I complete my build, but mine will be lighter and should have a better top end. I'm speculating right now but we'll see 😁
Hey dude Do you have any spare k parts kicking around A few sensors K20a2 throttle body PRB intake mainfold? Im local to you. Was at your place actually. My grandparents lived across from you to click the memorie
You will need to properly port and polish that head in order to make 300 hp all motor. Be a lot cheaper to leave the k24z3 bone stock and put a gt30r turbo on it. That will make 450 whp a lot easier and cheaper. Hey....good luck with the build!
Tuning on 93/94 octane I assume since you're in Ontario? E85 is hard to come by up here.. You're going to need some serious head work to make 300 whp on pump gas, p&p, 12.5:1, 80mm+ TB, big tube header, ect. Not that it hasn't been done, because it definitely has.. But the stock ports on the head will be the one thing holding you back. Contact RaceHeads in St. Andrews Ontario. The world record stock block H2b is running a Raceheads cylinder head, 300whp on M5 fuel.
Did you ever get this finished? Also, can this be accomplished with just the coolant passage change and the different head? Also, how did you wire for the variable valve timing system on the exhaust cam?
The 06-08 head is better in the fact that the camshafts are slightly larger, and the intake valves are 1mm larger. The cams I'm swapping out, and I may upgrade intake valves. We'll see
I have a 2013 Honda Civic Si Sedan K24Z7, I have low compression on cylinder 1 and 2 so I need a motor a used low miles motor runs me 1800. What do you recommend to do
Hi bro can i ask to question i have k24a rbb2 head i want to out rbc2 heaf the problem i dont have rocker arm and cams it possible i use k24a tocker arm with cams
not too sure if you have come acorss or would be able to anwser, i have a 2009 accord cu2 with a k24a3 engine block but with the z exhasut and intake manifold, wondering if itd be a straight swap to an a3 head? or will modifications most likely need to be done
That is an interesting build, complex when it is already known internally more focus on the block that Honda k series are pretty reliable as proven by both the internet and various youtube channels that mainly boost these motors and everything is stock is kicking over 350 HP day in and day out. I would have thought this was a simple budget build, so a mild rebuilt head with cams and a RSX VTC timing gear, PLM Header, etc, a tune and go can reach 300 hp goal and still be reliable...Even i see that you have the ATI damper total over kill, would it have been just been easy to just use a OEM Honda ITR (the similar RSX type S) crank pulley and your good None the less good luck on the build : )
I'll be getting into the oil pump in a later video, as the Type S oil pump cannot be bolted up to the K24Z blocks. It's nice for the K24A blocks as the threaded holes of the block align with the holes in the pump. You'll see how I get around that problem.
The SI transmission I installed. My accord was had a stock 5 speed, open diff, with a terrible final drive. The trans swap completely changed how my car feels.
THAAAAAAAANNNNNNK YOU!! I swear nobody cares about the 8th gen 2.4 Honda Accord I've been looking for a video like this for years! I bought my 2.4 '08 Honda Accord coupe in 2012 only to figure out there is nothing for it. All the aftermarket company are too cheap to try something like this and they only care about the Civic Civic Civic Civic ugh or the v6 Honda Accord coupe. They completely skipped over the 8th gen Honda Accord 2.4. Thank you man I cannot thank you enough for doing this!
FOR REAL, show some love for the accords
2.4 has no following
Tsx gang
Hey did you ever find anything on 8th gen accords?
you are the best at explaining things like B is for Build and i love this project. Just keep going because this project is personal to me. Really need all the help and knowledge i can get
Thanks Justaine! I'm excited to get this going since I drive my Honda the most out of all of my cars. I am hoping to enjoy the extra power day in and day out 👍
Every forum I've ever seen always says the z3 isn't worth it but I'm glad to see someone putting work into the 8th gen.
Just to share more technical knowledge about Honda's i-VTEC because I've got nothing better to do.
Honda made many versions of their "i-VTEC" systems. The performance oriented i-VTEC incorporated valve lift and timing on both the intake and exhaust side. Engines like the K20A, K20A2, K20Z1, K20Z3, K24A2, and K24A3 have the performance version of i-VTEC.
Some engines like the K20A3 and K24A8 only had "i-VTEC-E." Those engines don't incorporate variable valve lift, only a 12 to 16 valve switch over and variable valve timing. These engines usually produce more low-end torque and have better fuel efficiency. However, they don't rev as high and make less top-end power. In addition, their switch over is extremely early in the rev range and barely noticeable.
There is another version of i-VTEC that incorporates variable valve lift, but only on the intake cam. Engines like the K24Z3 (like the one in this video) have this version of i-VTEC where VVL only occurs on the intake side. Both intake and exhaust sides still have VTC, so this systems sets itself in the middle of performance and fuel economy.
You can generally tell the different K-Series engines apart by the intake manifold cover. If the lettering is red, then the engine has real "i-VTEC." If the manifold cover has black lettering or no lettering at all, it's most likely the "economy i-VTEC." Of course there's the head stamping to go off by too.
I'd love to hear more facts from fellow Honda fans and enthusiasts. Thanks!
U are one of the only accord coupe people on the platform thank you for showing all of us how to wake up the z3
hey Milam, I have a 2009 accord coupe k24z3 and I'm planning on doing the exact same thing. I'm gonna model my build after yours ! good luck
That's awesome Estefan! I hope this works out for both of us 🔥
howd it go
For those of us who don't scroll through all the comments, does anyone know what happened to the project? I was hoping to see the completed build and dyno.
I'm not sure, I think he built it and then he upgraded to newer Civic SI? But, im not sure.
Yeah he scrapped the idea cause "ThE civiC iS 150 PounDS liGHteR" or some stupid shit like that.
He sold the accord and got a civic
Can't wait for this whole series to be done bro!
👊❤️
Brother it’s been 4 years WE NEED YOU
This is so awesome. Thank you for describing the function of the lobes
Best k24 swap channel PERIOD straight to the point information and facts CONGRATULATIONS
Finally! I have a 9th gen civic si and I was looking into doing this and I can't find it anywhere, so thank you! Also I made 232hp 183tq on my 9th gen, k24z7 however I wanted to get on my exhaust and intake so I finally find you with all this!
Well I hope this works out for you! 👊 What mods do you have that have given you that power?
K24a2 for the win. Love the a2s!
They're an impressive engine! 👍
06+ 👍🏽
I've seen these things in pictures but seeing the R40 head in this video makes me want one so bad. The integrated manifold is beautiful.
I have one but want a k24a2 head lol
I could not have asked for a better series for your channel. Really looking forwards to see this build! :D
Thanks Fredrik! I'm looking forward to it as well 👍
I'm tuning a guy in Central America that has the K20z3 head on a K24z7 block. Making great power even with the stock Z7 oil pump and 1000ft above sea level.
Made 233whp and 190tq on a base run. We're aiming for mid 240s by the end of it
Holy shit brother, I'm so excited for you and this build!!!
I'm happy to hear that man! 👊
*patiently waits for dyno video*
Seriously though, SO much great info in this series, hope it continues soon!
1:52 minutes in and you already got the like
When my BRZ's motor blows I want one of these. I cant wait to learn how, great project! P.S. make more and sell them to us
You're literally doing everything I couldn't do on my old 8th gen haha. Really hyped for this build man!
Who's to say you can't? Or do you have an S2k? The one in your profile pic?
@@milanmastracci I unfortunately had to sell my 8th gen a few years ago due to relocating across the globe, but I currently drive an AP2 S2k now!
Damn that's a heck of an upgrade 🙌
Subscribed. Looking forward to updates! Also: just checked your Google Docs parts sheet, great info! Thank you for providing that.
Mannnn I drive a 2014 civic si , I want to do the exact same thing , the info on how to put a rbb vtec head is very limited, I’m glad I found your videos on RUclips ! How’s the build going ? Can’t wait to see the end result!!
Hey I was looking to upgrade my 2008 Accord, like you, I have some mild mods, tune exhaust intake mod and a street flywheel. Am looking forward to seeing this build
Nice doc you set up, thanks for that
That's what I'm trying to do!! I want more power. I can't wait to see this done 😎
Make sure u use NGK plugs for this set up
I read the part list you posted and I saw you are planning or planed on using BOSH spark plugs
Honda motors usually perform best with NGK or Denso’s
ZunoFG4 it sounds silly but its true. I cant tell u how many times ive given several different types of bosch plugs a try and the engine always feels just a bit off. Back to ngk's or densos and u can tell the slight difference in the smoothness with which the motor revs and idles.
My experience is the same, NGK is usually the go-to
So excited to see the new build and the videos coming up
finally someone who likes k24s and actually know what they are talking about. IM SO HYPE FOR THIS SERIES!!!
Very nice! Are you racing those? If not, is lot work and time consumed all that power just for street.
Can't wait man. Goodluck and have fun
This is gonna be interesting! Good job mate!
Hey what engine management are you considering; aftermarket needed to get to 300‽
I currently have Ktuner, but I need to find someone who can tune it to its full potential
I'm staying for this build. I'mma hopefully do this to my base 8th gen civic later on.
Sheldon Williams More work, sell it and buy an Si
@@jameslapine678 as much as I would love to get another car I don't mind putting in the work
Sheldon Williams When you map it out it’ll be cheaper and wiser to sell your base and buy an Si. I suggest joining the 8th gen forum on Facebook to help you better understand why you don’t wanna do this
@@jameslapine678 okay I will
Glad you're making these videos! I just got curious on what it would take (price and difficulty) to build a Honda engine like this since I always hear people talk about it
Well the price is the biggest part of what you can and can't do. If money is no object, I'd be buying a billet K24 engine block, but they're upwards of $8k right there, and that isn't even touching internals. I have a sheet in the description box of this video that I will be updating as I buy parts and spend money towards this build.
Are you gonna be doing this to the civic eventually?, i am thinking about doing this to my 9th gen civic and having a video reference of the build would be awesome.
When this is done, you’ll want to sell the mini
True!
Probably lol
Or K-swap the Mini...
Has he finished this build? The last update was 2 years ago??
I have... I have... I have... lol.... you have a stripped down engine with all different stuff. So basically you have a 2.4l on steroids.
Great video
Just adding if you get 300 hp out of a 4 banger your doing good. Because on Nicks Garage (You Tube) from Montreal, Quebec he does a lot of V8 builds with forged connecting rods and pistons. Average Horsepower on his Dyno is 600 horsepower out of a V8.
So your half of a V8 an 4 cylinder so if you where to get 300 hp (non turbo-ed or super charged) an Good accomplishment.
Will be an interesting build for sure.
Did you buy all the parts at once or did you acquire them over time and did you ever finish the build
Well that shows the differences between the American Acura k-24 engines and our Australian accord euro K-24 engines-my 2011 accord euro cu2 luxury has the K-24z3 engine but it has vtec on the intake and exhaust cams unlike the K-24 in this engine. There are so many variants of this engine and are different in other countries. My wife has a 2006 odyssey with a K-24 A3 but in America you guys got the 3.5 v6 engine in them.
Will you make a video on price breakdown of cost to do a kswap?
nice build, cant wait ti see the turn out
Me too dude! I'm pumped
How much did you spend on upgraded components ?
I know this is an old video, but 4 piston mentions that after porting the r40 head, it is the best flowing head out of all k series for all motor applications. You can actually add vtec cams on the exhaust side of the r40 head, and it’ll be better than the k20 heads and rbb (k24a2) head
If that is the case, that is new information as 4P has recently begun putting some work into the R40 head.
Exciting!!
Cant wait for the next video!
That makes two of us!
Hi milan I have watched this video atleast 5 times now.. I have a 9th gen si that is why I very interested, how is the build coming along? Love you content man!
Looking to replace both cams on a K24Z3. The OEM cams (14110-RL5-000 and 14120-RL5-000) are $600 plus each. Are there any other less costly cams that will work in the K24Z3?
Can you please explain the transmission
What was needed? I have a k24i auto..can I add SI transmission?
I'm using the Accord Euro R,
6 speed manual w/LSD...
Can the 2004 Acura TSX transmission work in the 2011 Honda Accord
#TEAMMILMAST cant wait to see how you tackle this!
Yeah buddy! I'm pumped!!
So did you put the a2 head on the z3 block? What did you have to change to do that. I never saw a reassembly video
k24a2 with type s oil pump, vtc gear skunk ultra manifold with bigger throttle body and race header valve springs, 3inch exhaust and a 4inch intake on e85 will do 300whp reving it to 9k tuned.
Do you own this car? Or you've seen it?
Can the manual 2004 Acura TSX transmission work in the 2011 manual Honda Accord
How about jtw5 tranny 6 speed from frv 2009 what can you say about the final drive
Thanks for the list brother...hope to refer to it at first chance! These engines are simply amazing even stock, so i prioritized appearance and got the lowering springs, black halos, heavy tint and black Ruffino fivestars. Its all about contrast for me))
What else would you suggest look-wise Milan?
seems like you already have a bunch done to it! Have you considered wrapping your roof black? I always find that to look good 👍
@@milanmastracci that sounds perfect, since thats the only paint chipping place on it . I kind of like how the black sunroof stands out, but i might actually give it a shot. Thanks
From bottom of oil pan to top of valve cover , how tall is that engine?
So far I like your videos. Idk why I never saw your channel but glad I did..
Question..
Why you chose the k24z3 with the hope of making 300hp with swapping the cylinder head of the k24a2 when you can simply use the entire k24a2 and just reuse the plugs of the sensors and extend the wires as needed. You can make 300hp all day with the parts your using inside of the a2. Just curious to know
-Miguel
-Migz
🍊range peel
Very good question Migz! There are a bunch of differences between the K24A2 and K24Z3 engine. I will be making a video talking about differences, as you cannot take one complete engine, and swap it into a different car. The K24A engines are the first generation K24s, and the Zs are the second gen ones.
@@milanmastracci as far as generation goes I'm up to date with that. I'm looking forward to seeing the video about it .. was just wondering as you can literally drop the A2 in just about anything lol in your case it should be just mount brackets I'm sure someone already did it ..
In my case I have an older integra DA chassis going with a JDM k24a from a cl9 and using your same transmission in my case they say to change the inner casing for the 02-04 typeS transmission due to the VSS plug and what not.. but they already have an adapter for the plug for the 06-11 Si z3 trans VSS.. of I find some info on that hope you dont mind me sending it your way.. but none the less dude I love what you're doing
-migz
🍊range peel
If you have the k24 engine with same block why swap the whole engine an not just the head or build the motor you have ????????
Just out of curiosity what would you wind up with by just swapping the head? My 09 Accord has about 65k miles on it. I was considering putting in a 6 cylinder l but I like this solution better. I'd also like to ask you for more details about upgrading the exhaust to dual. Did you need any custom parts or was it all Honda OEM parts? Thanks Tom USA
This is going to be awesome. Slap a turbo and it will 400+ hp
Good luck on the build! What was required to install the 6spd lsd transmission on your 8th gen accord?
Thanks man! The transmission itself, you will need a nut for the transmission mount, and option speedo-corrector since the Final Drive and gearing is different.
Can the 2004 Acura TSX transmission work in the 2011 Honda Accord
" ..... Which allows more air to go into the engine." ok next your gonna say: MORE POWER BABY!!😂😂
( Sorry I just jump to another channel😂)
This is super helpful!
Hey I was planning on building a k24z3 turbo for a DD, what do you suggest? Should I gut it and rebuild it or run it on stock internals? If I gut it what pistons and rods should I use? What type of valve/valve springs and retainers should I get? This is my first time building a motor so any suggestions or support is really appreciated. Thank you!
If it's a daily is best to use cast pistons, forged are best for track use only vehicle
Is building a k24z3 block worth building? Or should I get an k24A2 block? Also will it fit with a k20z1 head? Will it fit in a RSX?
So much knowledge 👍👍
Whats the update on this man ? Im exited for you
Bro, my current 2009 coupe makes 300hp with basic bolts ons, I’m interested in seeing how different it’ll be with the 4 banger vs the v6 which I have
From my understanding, the V6 will have more low end torque even after I complete my build, but mine will be lighter and should have a better top end. I'm speculating right now but we'll see 😁
turned on the bell notification!
Can’t wait for the next video !!!!
Its coming! 🙌
im pretty new to this and in the process of building my EM2, would it be better to get my hands on a K24Z or K24A?
So can I just swap the head right over no issue I know you upgraded the internals but I’m genuinely just asking if I can swap the k24z3 with the k24a2
Did you finished your engine? All motor 300hp k24?
Hey dude
Do you have any spare k parts kicking around
A few sensors
K20a2 throttle body
PRB intake mainfold?
Im local to you.
Was at your place actually.
My grandparents lived across from you to click the memorie
Hey Matt! Yeah I remember you lol I don't unfortunately have any of extra parts like those
You will need to properly port and polish that head in order to make 300 hp all motor.
Be a lot cheaper to leave the k24z3 bone stock and put a gt30r turbo on it.
That will make 450 whp a lot easier and cheaper.
Hey....good luck with the build!
come down here and do mine next u bloody fool.awesome
Tuning on 93/94 octane I assume since you're in Ontario? E85 is hard to come by up here.. You're going to need some serious head work to make 300 whp on pump gas, p&p, 12.5:1, 80mm+ TB, big tube header, ect. Not that it hasn't been done, because it definitely has.. But the stock ports on the head will be the one thing holding you back. Contact RaceHeads in St. Andrews Ontario. The world record stock block H2b is running a Raceheads cylinder head, 300whp on M5 fuel.
I hope you plan on porting out intake and exhaust gas?? Before putting the car together
100%
What civic si lsd transmission are you running with the k24z3 ?????
one question, is it mandatory for all new parts?
this gonna be crazzyyy
Dude!!!! On fire!!!!
What was Honda thinking when they designed the Z3 head?
Did you ever get this finished?
Also, can this be accomplished with just the coolant passage change and the different head? Also, how did you wire for the variable valve timing system on the exhaust cam?
He gave up 25% way through and ended up just buying a civic SI. Was super disappointed that we didn't get to see this all the way through.
@@WARBROTHER2 gah... Never quit if you're gonna inspire people
If you have a 04 TSX what head and block would you use, or would you just keep the same engine and just change the internals?
Whats the difference between k24z1 and k24z4?
Did you end up finishing this build?
If i put a k20z3 head on k24z3 block will I be able to have as much power as this set-up?
Which ECU did you use for this build?
Can the 2004 Acura TSX transmission work in the 2011 Honda Accord
Cool build! The 06+ tsx head I've heard is much better than the 04-05
The 06-08 head is better in the fact that the camshafts are slightly larger, and the intake valves are 1mm larger. The cams I'm swapping out, and I may upgrade intake valves. We'll see
I have a 2013 Honda Civic Si Sedan K24Z7, I have low compression on cylinder 1 and 2 so I need a motor a used low miles motor runs me 1800. What do you recommend to do
This is going to be awesome good luck
Thanks Gareth! 👊
@@milanmastracci welcome
Can the manual 2004 Acura TSX transmission work in the 2011 manual Honda Accord
Do you think you can swap that head on a third gen CRV it uses a k24z3 I believe
I hope these new parts are better quality then the timing chain kit.
LOL 10000% BETTER PARTS!
Ima try to do this
Hi bro can i ask to question i have k24a rbb2 head i want to out rbc2 heaf the problem i dont have rocker arm and cams it possible i use k24a tocker arm with cams
not too sure if you have come acorss or would be able to anwser, i have a 2009 accord cu2 with a k24a3 engine block but with the z exhasut and intake manifold, wondering if itd be a straight swap to an a3 head? or will modifications most likely need to be done
It will not be a straight swap unfortunately. The head and block ports won't line up properly.
A supercharger and a tune in my 2005 tsx it should be enough for 300hp ?
That is an interesting build, complex when it is already known internally more focus on the block that Honda k series are pretty reliable as proven by both the internet and various youtube channels that mainly boost these motors and everything is stock is kicking over 350 HP day in and day out. I would have thought this was a simple budget build, so a mild rebuilt head with cams and a RSX VTC timing gear, PLM Header, etc, a tune and go can reach 300 hp goal and still be reliable...Even i see that you have the ATI damper total over kill, would it have been just been easy to just use a OEM Honda ITR (the similar RSX type S) crank pulley and your good
None the less good luck on the build : )
I'll be getting into the oil pump in a later video, as the Type S oil pump cannot be bolted up to the K24Z blocks. It's nice for the K24A blocks as the threaded holes of the block align with the holes in the pump. You'll see how I get around that problem.
Does this work with a K24Z7 bottom end as well??
Did the SI trans come in your Accord or did you put it in? Also was your Accord a stock 6 speed?
The SI transmission I installed. My accord was had a stock 5 speed, open diff, with a terrible final drive. The trans swap completely changed how my car feels.
Can the manual 2004 Acura TSX transmission work in the 2011 manual Honda Accord