The Rifles only Suppresor wrap The HAD in particular is the one i have and it has a chord for pulling it tight and i made a loop so i can slide it on and off but wrap the loop around the end of the Suppresor when i dont want it to move.
I run Suppressor Co. works great for gem tech, I bought 6” for 5” suppressor though and zip tied end. I’ll put 250 rounds down and can still grab suppressor. With that said, funny you pointed out the metal brackets. I just got home from range. I have a small burn on finger and couldn’t figure out where it came from. As you pointed out brackets, I looked at finger and said “hmm, well would you look at that” hahahaha
Waiting on my permission slip/tax stamp from the atf. I purchased the Armageddon the day i paid for the suppressor. I did my research and just like your review it was the best.
Great video! You get what you pay for, and I'm not rich enough to buy rubbish! Having owned a few very well known brands, I can say from my own experience that the AG suppressor covers are by far the best. They are an incredible company to deal with, their customer service is second to none.
@@BigJohnsonGG i also have coletac. Never had problem with it coming off. The one thing I see wrong with this cover is the plastic cord cinch. That wouldnt last long with me i dont think.
I've never tried a supressor cover before actually. I've wanted to try one but I run my Dead Air Sandman S under my rails so a cover wouldn't really work as far as clearance. Good video as usual Big J 🇺🇸
If you would like to review our suppressor cover heavy, please shoot us an email. Guarantee that you'll love ours! Great review either way, you make some good observations. Metal on a suppressor cover is a bad idea...
does the over reduce the cooldown speed of the suppressor, I am thinking of a negative to having a cover, such as longer wait times, to have it cool off, vs not keeping it covered
@@BigJohnsonGG check out the Weka covers. They are less than $25. It's a high temp silicone cover that slides into your can and won't come off and greatly reduce mirage!!!
Let me summarize, one of two covers fit. The first shown did, the second one shown wound walk itself off the end of his suppressor no matter how tight he tightened it, END OF SUMMARIZATION! WASTE OF NINE MINUTES!!!
Armageddon Link is in the Description
Do you run Suppressor Covers, if so which Brand..and your opinions on them? Thanks for Watching, Carry On
Does your cover charge your point of impact? 25yrds ,low 6 o'clock 4,6 inches low. Same ammo
The Rifles only Suppresor wrap The HAD in particular is the one i have and it has a chord for pulling it tight and i made a loop so i can slide it on and off but wrap the loop around the end of the Suppresor when i dont want it to move.
Excellent review! I'm in the market for some suppressor covers and I was glad to be able to watch this.
Thanks for Watching, I appreciate your feedback!
I run Suppressor Co. works great for gem tech, I bought 6” for 5” suppressor though and zip tied end. I’ll put 250 rounds down and can still grab suppressor. With that said, funny you pointed out the metal brackets. I just got home from range. I have a small burn on finger and couldn’t figure out where it came from. As you pointed out brackets, I looked at finger and said “hmm, well would you look at that” hahahaha
added the link to my favorites and will be buying one very soon thank you
Thanks for Watching
Waiting on my permission slip/tax stamp from the atf. I purchased the Armageddon the day i paid for the suppressor. I did my research and just like your review it was the best.
if the color of the sleeve bothers anyone. Paint it with black header spray paint.
This video has convinced me to place an order with them. Ordering for a Hybrid 46DTM I love the look of the black multicam.
I’m still using it with zero issues.
Thanks for sharing!
Great video!
You get what you pay for, and I'm not rich enough to buy rubbish!
Having owned a few very well known brands, I can say from my own experience that the AG suppressor covers are by far the best.
They are an incredible company to deal with, their customer service is second to none.
These work pretty well for the price. There are other options but fuck paying $200 + for a suppressor cover. Great review!
Thanks for watching
The tan one looks nice but, not being able to catch the ends will never stay in place.
I have the Cole tech cover on my hybrid 46M , in the full configuration and it doesn’t slide off
That’s who makes the model I show, that was coming off.
@@BigJohnsonGG i also have coletac. Never had problem with it coming off. The one thing I see wrong with this cover is the plastic cord cinch. That wouldnt last long with me i dont think.
@bps5891 Still not one problem with it to date. Thanks for watching.
Dude. I wish I knew before I bought mine. 5000+ rds and it always flys off
Thanks for watching
Thanks for the info. Trying to figure this world out. Not paying $200+ for a freaking cover.
Thanks for watching.
I've never tried a supressor cover before actually. I've wanted to try one but I run my Dead Air Sandman S under my rails so a cover wouldn't really work as far as clearance. Good video as usual Big J 🇺🇸
Thanks brother, you need a hot pocket cover for your rail. Carry on
I just ordered one so here’s to hoping it works better than the Silencerco one that I accidentally shot off the end of my suppressor.
Any idea if they ship to Europe?
Not sure you would have to email them & ask?
Spicy Fifi.
In the 60s and 70s. We could get a roll of asbestos from the local Speed shop. You know before asbestos was bad for you.
If you would like to review our suppressor cover heavy, please shoot us an email. Guarantee that you'll love ours! Great review either way, you make some good observations. Metal on a suppressor cover is a bad idea...
Thanks for watching. I just sent y’all an email.
i found the same issue with "suppressorco" on an omega30 shooting 300blk subs....like how?
does the over reduce the cooldown speed of the suppressor, I am thinking of a negative to having a cover, such as longer wait times, to have it cool off, vs not keeping it covered
It does keep it warmer. However after you shoot you can then pull it back to let it cool.
@@BigJohnsonGG hi thank you for answering my question :)
No Worries
Great Info!
Thanks, just sharing my personal experience with them.
I had a suppressor cover, probably not a real good one, to me it held too much heat and it smelled like it was melting so I got rid of it.
Probably wasn’t a high temp, You still have to slide them back to let both cool.
@@BigJohnsonGG 👍
Let me guess ? SilencerCo ?
Yes, but it’s actually really made by a soft goods company for them….that I won’t name.
Fyi. Depending on the gun, take the excess, create a loop, put it behind muzzle device and pull tight. Won't move
This version doesn’t tie in the rear.
I'm talking about captive end of Bungie
Nice review!just sent in my paperwork to atf for my trash panda
I love mine. Thanks for Watching, Carry On
I had a cover but don't use them, my qd won't release until the can has cooled off.
Without one, When I transition to my pistol it’s lands right on my left leg. 🔥
@@BigJohnsonGG Ya, I know they have there place, I just lazy shoot around here and move it to different platforms quite often.
Can titanium cans handle the additional heat that’s trapped for semi-auto 300 BLK subsonic? I wasn’t sure if the baffles will erode faster.
Q says it can on the Trash Panda. I’ve been sliding my new cover back to release heat.
@@BigJohnsonGG Okay, thanks. I was trying to decide between the Nomad L and Nomad LT. I think I need to go with the steel variant to be safe.
Burn proof gear makes the best cover. Expensive but by far the best.
Do you have any discount code ? Need a cover for my YHM turbok
Unfortunately I don’t. Mine was 79.00 + 6.50 shipping. Thanks for Watching, Carry On
@@BigJohnsonGG check out the Weka covers. They are less than $25. It's a high temp silicone cover that slides into your can and won't come off and greatly reduce mirage!!!
I shot 2 covers down range but not having a cover makes you not want to go shooting it
Let me summarize, one of two covers fit. The first shown did, the second one shown wound walk itself off the end of his suppressor no matter how tight he tightened it, END OF SUMMARIZATION! WASTE OF NINE MINUTES!!!
So glad you enjoyed the video, make sure and keep that super positive attitude that you possess! 🙄
Burn proof gear covers or nothing...