I had a scorpion a few years ago and I foolishly sold it when I was tight on cash trying to get into other hobbies. Also being a fool, I let my CCW expire and then bought a new Scorpion a few days ago and get to pick it up tomorrow. Hope you don't mind but I love your build and will be trying to replicate it. Only problem for me is I do not have any 3D printing skills haha. Love the trigger you have on there. I will also be trying to get it SBR'd and suppressed in the future. Thanks for the video and hyped to see how well this looks. Subbed bro!
Imitation is the highest form of flattey! I appreciate the kind words. As for the trigger, check out the HBI options - they also reduce overtravel in a similar way as the one I designed. Tandemkross has a cool trigger option as well that also includes pre-travel adjustment. Good luck with your build! Thanks for watching, commenting, and subscribing!
@dltz do you happen to have the digital file of the mount you made for your light pressure pad? I have a buddy who has a printer that may be able to make it for me if you do not mind. Also, looking forward to any future content bro! Glad to see the 2a community out doing things
@@ryanm5510Totally! Here is my grabcad page where I post all my models - information for each individual part is included with the model and there is a link to videos on each model: grabcad.com/dltz-1/models Here is a video where I go over all the models I have made: ruclips.net/video/GscBKwkOn3Y/видео.html
It looked a little suspect to me at first as well. I have ordered a lot of stuff from them at this point and have never had an issue getting it shipped to the US.
Nice build. This is my next firearm for sure. Also, for the first time, I'll be getting my NFA tax stamp for a suppressor specifically for this gun. Now, if I can only find them in stock ???!!!
Heck yeah! That color looks sick. My buddy just built one up in gray and it looks awesome too! The handguard I got comes in OD green and gray as well. And the YetiWurks grip comes in OD green too. Great way to improve ergos and keep the sick color! Thanks for watching and commenting!
I appreciate that. I have thought of selling the parts I design and make for guns, but I do not know if I really want to go through the trouble of doing so. If you're looking for a pressure pad mount specific to the Streamlight I would recommend Shaffer Machining: www.shaffermachining.com/product-page/streamlight-pressure-switch-m-lok-mount There are way more options out there for the Surefire tape switches but I cannot justify the cost of the Surefire scout lights to myself. Thanks for watching!
Great video man! I love my CZ and you really gave me a lot of tips on how to upgrade it. Didn't knew HB had so many good stuff like the receiver pin. Goodbye pesky motion!
Thank you! I am glad it was helpful. The scorpion has a huge amount of aftermarket support which is another reason it's such a great platform. Thanks for watching and commenting!
Awesome video! Did you happen to post a stl or stp file of the switch mount you 3d printed on any of the open source websites? I have the same light and switch but just have it taped on at the moment. Would love to print a dedicated Mlok mount for it
I had this light laying around so I ordered the arisaka mount for it. I was going to get the TLR rail mount 1. That would be a great option too. It attaches directly to picatinny rail.
The link to the picatinny cable guides is in the description already. Here is the link to the M-Lok scout light mount I used: www.amazon.com/dp/B09RXTQWYQ?psc=1&ref=ppx_yo2ov_dt_b_product_details The pressure pad mount is my own design and I 3D printed it. Hope this helps and thanks for watching!
It's one of my favorite guns to shoot suppressed, especially with subsonic ammo! Its so much fun! Look into the 125% recoil spring from Ascalon Arms if you are going to shoot it suppressed a lot - I put out a video on that spring recently.
It's a direct blow back 9mm. It's a bit gassy but not terrible. Not really anything you can do about it other than a flow thru suppressor rather than a baffle core design.
New subscriber! Love my little CZ Scorpion. Did a video series on converting it to K length some years ago. Still haven't SBRd mine, but might do that in the next few months. Those Rugged Obsidians are awesome pistol caliber cans! Have a couple of them and run them on all my sub guns. Nice job on the 3D printed stuff...that's an itch I've yet to scratch, but so cool seeing what folks come up with. That trigger looks phenomenal. I installed the HBI springs and polished up my trigger. Same factory trigger shoe, but might swap it as some point. Nice job man!
Thanks for your comment and subscribing! I really appreciate it. I have a lot of fun with my gun projects! I'm very pleased with how the 3D printed parts are holding up.
which rugged suppressor is this. i have been looking into there products for my cz. Is the obsidian 9 gonna be quieter than the 45? im just getting into the suppressor world im trying to have my next suppressor not be a disappointment like my first and have it truly optimized for my cz any help is greatly appreciated..
This is the Rugged Obsidian 45. I run it on 45 caliber pistols and my 9mms all the time. Its very modular so you can configure it however you want. I run 45 caliber boosters, 9mm boosters, 9mm direct thread, and 9mm 3 lug. I am very happy with it and have found solutions in the Rugged product line for every gun I want to run it on. I highly recommend it. As for the noise difference I feel it is negligible. My buddy has the Obsidian 9mm and if I put a 9mm front cap on mine (so the baffles are 45 cal, but the front of the suppressor where the bullet exits is 9mm) and I cannot tell a difference in noise with or without hearing protection. These suppressors are very well regarded and very popular and I feel it is for a good reason. In terms of putting it on a Scorpion, you can use 3 lug (requires a thread on muzzle device) or direct thread - either option would work great! I hope this helps, if you have anymore questions I can do my best to answer them here if you reply to this comment thread. Thanks for watching!
@@brantleyspringmeyer2576 I almost never shoot without hearing protection. Depending on the 9mm round the bullet is still breaking the sound barrier and making a super sonic crack which is above the level of hearing safe. Always wear your PPE! Subsonic ammo in 9mm with this suppressor is hearing safe although I still generally wear hearing protection as extended exposure is not good.
ive been debating for weeks. get one of these and mod it out. or get an AR and mod that out. after looking at 556. ammo prices. the CZ is looking better and better. this will be my first rifle, lots of pistols but no rifles. suggestions ? ur CZ is badass
If you do not have a rifle. Buy an AR-15. This is technically a "short barreled rifle," but really its a pistol you can fire from your shoulder. Its not very useful past 50 yards. Also, paying for the tax stamp is an extra 200 dollars. Buy an AR-15, the most common rifle in America, that shoots the most common caliber in America. For the price of this (including tax stamp it was $2200) you can build out a sick AR with great features and a nice optic. Remember - all rifles need a sling, optic, and white light minimum. Hope this helps... build an AR. The 16" carbine version of this would be a fine choice for a rifle except they are discontinued and you cannot find them anymore unless someone is selling a used one.
@@EngineersArmory appreciate it brother. The range was a concern of mine. That just cleared that up. AR it is. Any suggestions on a decent reliable starter AR ?
@@ChrisCom. I like to build my own ARs and I always start with Aero Precision - I really like their products. I have had good luck with Palmetto State Armory products as well. In terms of fully built ARs depending on price look into PSA, BCM, Daniel Defense, Ruger, Sig, IWI. It depends on if you want to buy one and run it, or modify it. If you're into building and modifying then maybe just start with a build - its pretty straight forward, lots of great videos out there, and also the AR15 is all mil-spec so the parts and components are all generally going to be compatible (don't forget to check head spacing though!!). If you think you might only change out a stock or a pistol grip then just buy a complete gun. Start with a 16" barrel gun - that way you don't have to worry about making it an SBR or pin and welding a muzzle device, you can put whatever muzzle device you want on it. Those are just my recommendations, I am by no means an expert on ARs, but I hope this helps!
I ordered this back in July 2022 when the 3+ started hitting the shelves. I specifically wanted this one due to the aftermarket support. I figured with the 3+ coming out the Evo 3 S1 pistol would be discontinued soon. It looks like its still available. The scorpion carbines have been discontinued. If you're in the US they are still available currently on Midway, Buds gun shop, and Palmetto state armory. Actually on sale with a rebate right now too.
Thanks a lot for the video. Great job 👍Have you published the STL file for the trigger somewhere? Thingiverse or Printables? Or can i buy this STL/3MF file from you? I was very impressed with your trigger. Greetings from Czech Republic 🙂
Thanks for commenting! I appreciate the input! I have not published any of my designs. I'm a bit in a weird space with that. Part of me wants to make them available to anyone who wants them. Part of me wants to sell them as I have many designs for many guns (some are featured in other videos), while trying to remain anonymous as possible. What I would rather see happen is that others get inspired to take on some design work themselves and come up with their own solutions - especially with how accessible additive manufacturing is now. Short answer is No, I have not published my designs and I do not know if I will do that or sell them in the future. If something changes, the people who have commented on my videos asking about my designs will be notified. Thanks again!
@@EngineersArmory OK. All clear. Thank you for the explanation. I understand you. Well... I'm going to grab my caliper and go do something with it in Fusion360. Thanks for inspiration 🙂
Looks like your eyes should be burning right about now. She's blowing powder smoke back in your face what a Ditz. I have that same but mine is a 16.2" barrel. When you shoot it un-suppressed how is it.
My eyes were fine, thanks for your concern. I was outdoors, little bit of wind, and safety glasses on. I shot it a lot that day (and have since) with the suppressor on it and it never bothered me. Unsuppressed it's fine.
Nice setup. Would have been nice to get the total damage on your wallet for this build.Fock the atf. The NFA is unconstitutional. It doesn’t withstand text and tradition of this country
Alright, I added up what I paid for all this stuff - $2200. Prices are currently higher than what I paid on most parts. I paid $950 for the gun. This cost includes the tax stamp, light, and optic. Hope this helps. Also ouchy! Spendy boy.
I just got a 3+ pistol and doing my e-form 1 tonight. This is an EXCELLENT and very well done video!
Thanks so much! and congrats on your new scorpion!
I had a scorpion a few years ago and I foolishly sold it when I was tight on cash trying to get into other hobbies. Also being a fool, I let my CCW expire and then bought a new Scorpion a few days ago and get to pick it up tomorrow. Hope you don't mind but I love your build and will be trying to replicate it. Only problem for me is I do not have any 3D printing skills haha. Love the trigger you have on there. I will also be trying to get it SBR'd and suppressed in the future. Thanks for the video and hyped to see how well this looks. Subbed bro!
Imitation is the highest form of flattey! I appreciate the kind words. As for the trigger, check out the HBI options - they also reduce overtravel in a similar way as the one I designed. Tandemkross has a cool trigger option as well that also includes pre-travel adjustment. Good luck with your build! Thanks for watching, commenting, and subscribing!
@dltz do you happen to have the digital file of the mount you made for your light pressure pad? I have a buddy who has a printer that may be able to make it for me if you do not mind.
Also, looking forward to any future content bro! Glad to see the 2a community out doing things
@@ryanm5510Totally! Here is my grabcad page where I post all my models - information for each individual part is included with the model and there is a link to videos on each model:
grabcad.com/dltz-1/models
Here is a video where I go over all the models I have made:
ruclips.net/video/GscBKwkOn3Y/видео.html
@@EngineersArmory you are the absolute best! Thank you so much!
One of the best Scorpion videos I have seen yet. Thanks.
Thanks so much I really appreciate it!!
Glad you said you got it from cz parts. I was thinking the site was a scam. Just looks funky. But guess I'll give them a shot
It looked a little suspect to me at first as well. I have ordered a lot of stuff from them at this point and have never had an issue getting it shipped to the US.
Nice build. This is my next firearm for sure. Also, for the first time, I'll be getting my NFA tax stamp for a suppressor specifically for this gun. Now, if I can only find them in stock ???!!!
Great looking build!
Thanks sir, I appreciate it!
why didn’t RUclips show me your channel in the recommendations before?! great review !!! subscribe!!! hello hello from Russia ✌️
Just got one in OD green. LOVE IT!!!!
Heck yeah! That color looks sick. My buddy just built one up in gray and it looks awesome too! The handguard I got comes in OD green and gray as well. And the YetiWurks grip comes in OD green too. Great way to improve ergos and keep the sick color! Thanks for watching and commenting!
you should sell that light switch mount! Looks factory and low profile! I'd def buy 1
I appreciate that. I have thought of selling the parts I design and make for guns, but I do not know if I really want to go through the trouble of doing so. If you're looking for a pressure pad mount specific to the Streamlight I would recommend Shaffer Machining: www.shaffermachining.com/product-page/streamlight-pressure-switch-m-lok-mount There are way more options out there for the Surefire tape switches but I cannot justify the cost of the Surefire scout lights to myself. Thanks for watching!
Finally decided to publish my designs. Here is a video with all the information and link to my grabCAD page:
ruclips.net/video/GscBKwkOn3Y/видео.html
Great video man! I love my CZ and you really gave me a lot of tips on how to upgrade it. Didn't knew HB had so many good stuff like the receiver pin. Goodbye pesky motion!
Thank you! I am glad it was helpful. The scorpion has a huge amount of aftermarket support which is another reason it's such a great platform. Thanks for watching and commenting!
Awesome video! Did you happen to post a stl or stp file of the switch mount you 3d printed on any of the open source websites? I have the same light and switch but just have it taped on at the moment. Would love to print a dedicated Mlok mount for it
Chyea man I posted all my designs on GrabCAD.
grabcad.com/dltz-1/models
Fantastic! Thank you@@EngineersArmory
Thanks for the video. I have been looking for a good light set up for mine. This helped me.
Glad it helped! Thanks for watching!
I had this light laying around so I ordered the arisaka mount for it. I was going to get the TLR rail mount 1. That would be a great option too. It attaches directly to picatinny rail.
That is a sweet gun I'm going to be doing an AR9 build for sdi here pretty soon
How much are you in for this build? Looks great
Including the $200 tax stamp I wanna say $2100-$2200. Cant quite remember it's been a while. It may be in a reply to another comment.
do you have a link to the exact mount that you used for the light and whatever else in needed for install? thanks
The link to the picatinny cable guides is in the description already. Here is the link to the M-Lok scout light mount I used: www.amazon.com/dp/B09RXTQWYQ?psc=1&ref=ppx_yo2ov_dt_b_product_details The pressure pad mount is my own design and I 3D printed it. Hope this helps and thanks for watching!
love my scorpion, that supressor is fucking awesome and the sound it makes is great. definitely wanna get me one
It's one of my favorite guns to shoot suppressed, especially with subsonic ammo! Its so much fun! Look into the 125% recoil spring from Ascalon Arms if you are going to shoot it suppressed a lot - I put out a video on that spring recently.
Good job brother. Looks great.
That’s a sweet rig!
Does the CZ Scorpion throw blowback on your face when using a suppressor? Is it fixable?
It's a direct blow back 9mm. It's a bit gassy but not terrible. Not really anything you can do about it other than a flow thru suppressor rather than a baffle core design.
New subscriber! Love my little CZ Scorpion. Did a video series on converting it to K length some years ago. Still haven't SBRd mine, but might do that in the next few months. Those Rugged Obsidians are awesome pistol caliber cans! Have a couple of them and run them on all my sub guns. Nice job on the 3D printed stuff...that's an itch I've yet to scratch, but so cool seeing what folks come up with. That trigger looks phenomenal. I installed the HBI springs and polished up my trigger. Same factory trigger shoe, but might swap it as some point. Nice job man!
Thanks for your comment and subscribing! I really appreciate it. I have a lot of fun with my gun projects! I'm very pleased with how the 3D printed parts are holding up.
Where does one get a suppressor for this gun?
Any 9mm suppressor will do.
which rugged suppressor is this. i have been looking into there products for my cz. Is the obsidian 9 gonna be quieter than the 45? im just getting into the suppressor world im trying to have my next suppressor not be a disappointment like my first and have it truly optimized for my cz any help is greatly appreciated..
This is the Rugged Obsidian 45. I run it on 45 caliber pistols and my 9mms all the time. Its very modular so you can configure it however you want. I run 45 caliber boosters, 9mm boosters, 9mm direct thread, and 9mm 3 lug. I am very happy with it and have found solutions in the Rugged product line for every gun I want to run it on. I highly recommend it. As for the noise difference I feel it is negligible. My buddy has the Obsidian 9mm and if I put a 9mm front cap on mine (so the baffles are 45 cal, but the front of the suppressor where the bullet exits is 9mm) and I cannot tell a difference in noise with or without hearing protection. These suppressors are very well regarded and very popular and I feel it is for a good reason. In terms of putting it on a Scorpion, you can use 3 lug (requires a thread on muzzle device) or direct thread - either option would work great! I hope this helps, if you have anymore questions I can do my best to answer them here if you reply to this comment thread. Thanks for watching!
@@EngineersArmory so you shoot it without ear pro it's that quiet? If so that's awsome
@@brantleyspringmeyer2576 I almost never shoot without hearing protection. Depending on the 9mm round the bullet is still breaking the sound barrier and making a super sonic crack which is above the level of hearing safe. Always wear your PPE! Subsonic ammo in 9mm with this suppressor is hearing safe although I still generally wear hearing protection as extended exposure is not good.
ive been debating for weeks. get one of these and mod it out. or get an AR and mod that out. after looking at 556. ammo prices. the CZ is looking better and better. this will be my first rifle, lots of pistols but no rifles. suggestions ? ur CZ is badass
If you do not have a rifle. Buy an AR-15. This is technically a "short barreled rifle," but really its a pistol you can fire from your shoulder. Its not very useful past 50 yards. Also, paying for the tax stamp is an extra 200 dollars. Buy an AR-15, the most common rifle in America, that shoots the most common caliber in America. For the price of this (including tax stamp it was $2200) you can build out a sick AR with great features and a nice optic. Remember - all rifles need a sling, optic, and white light minimum. Hope this helps... build an AR. The 16" carbine version of this would be a fine choice for a rifle except they are discontinued and you cannot find them anymore unless someone is selling a used one.
@@EngineersArmory appreciate it brother. The range was a concern of mine. That just cleared that up. AR it is. Any suggestions on a decent reliable starter AR ?
@@ChrisCom. I like to build my own ARs and I always start with Aero Precision - I really like their products. I have had good luck with Palmetto State Armory products as well. In terms of fully built ARs depending on price look into PSA, BCM, Daniel Defense, Ruger, Sig, IWI. It depends on if you want to buy one and run it, or modify it. If you're into building and modifying then maybe just start with a build - its pretty straight forward, lots of great videos out there, and also the AR15 is all mil-spec so the parts and components are all generally going to be compatible (don't forget to check head spacing though!!). If you think you might only change out a stock or a pistol grip then just buy a complete gun. Start with a 16" barrel gun - that way you don't have to worry about making it an SBR or pin and welding a muzzle device, you can put whatever muzzle device you want on it. Those are just my recommendations, I am by no means an expert on ARs, but I hope this helps!
@@EngineersArmory appreciate it 🙏🏻 thanks brother
Great video and awesome build. An inspiration :)
Is this gun discontinued? Or do they still make them and can still find them I haven’t been able to?
I ordered this back in July 2022 when the 3+ started hitting the shelves. I specifically wanted this one due to the aftermarket support. I figured with the 3+ coming out the Evo 3 S1 pistol would be discontinued soon. It looks like its still available. The scorpion carbines have been discontinued. If you're in the US they are still available currently on Midway, Buds gun shop, and Palmetto state armory. Actually on sale with a rebate right now too.
@@EngineersArmory bro you goated asf thanks so much! I’m bout to head out and go get one ordered homie frrrr 😂😂😂😂😂
@@EngineersArmory which site got that sale ?
@@BWM4L I think the best deal is on budsgunshop.com currently. about $850 with a rebate available.
@@BWM4L My pleasure! Glad to help! You won't be disappointed with this gun its so much fun!
Super sweet upgrades….. I may need to make some upgrades to mine. Waiting for my form4 to get approved. Thanks for sharing. Just sub’d
Thanks! I appreciate it! The Scorpion is such a cool platform.
@@EngineersArmory Yes it is.
Thanks a lot for the video. Great job 👍Have you published the STL file for the trigger somewhere? Thingiverse or Printables? Or can i buy this STL/3MF file from you? I was very impressed with your trigger. Greetings from Czech Republic 🙂
Thanks for commenting! I appreciate the input! I have not published any of my designs. I'm a bit in a weird space with that. Part of me wants to make them available to anyone who wants them. Part of me wants to sell them as I have many designs for many guns (some are featured in other videos), while trying to remain anonymous as possible. What I would rather see happen is that others get inspired to take on some design work themselves and come up with their own solutions - especially with how accessible additive manufacturing is now. Short answer is No, I have not published my designs and I do not know if I will do that or sell them in the future. If something changes, the people who have commented on my videos asking about my designs will be notified. Thanks again!
@@EngineersArmory OK. All clear. Thank you for the explanation. I understand you. Well... I'm going to grab my caliper and go do something with it in Fusion360. Thanks for inspiration 🙂
@@BaronOnlineCZ Excellent! I would love to see your design and what you come up with!
Finally decided to publish my designs. Here is a video with all the information and link to my grabCAD page:
ruclips.net/video/GscBKwkOn3Y/видео.html
Subbed. Slick work!
Thanks! I appreciate the subscription and comment buddy!
I would buy the light switch holder from you. or "donate" to your development fund.
Finally decided to publish my designs. Here is a video with all the information and link to my grabCAD page:
ruclips.net/video/GscBKwkOn3Y/видео.html
I need 16 inch barrel. Anyone have a take off?
I studied self defense for many years, why am I limited on how I can defend myself?
Looks like your eyes should be burning right about now. She's blowing powder smoke back in your face what a Ditz. I have that same but mine is a 16.2" barrel. When you shoot it un-suppressed how is it.
My eyes were fine, thanks for your concern. I was outdoors, little bit of wind, and safety glasses on. I shot it a lot that day (and have since) with the suppressor on it and it never bothered me. Unsuppressed it's fine.
Nice setup. Would have been nice to get the total damage on your wallet for this build.Fock the atf. The NFA is unconstitutional. It doesn’t withstand text and tradition of this country
Alright, I added up what I paid for all this stuff - $2200. Prices are currently higher than what I paid on most parts. I paid $950 for the gun. This cost includes the tax stamp, light, and optic. Hope this helps. Also ouchy! Spendy boy.
Got to stop biting your nails bro,
I've been waiting for a comment like this on my videos. Haha I know I'm an anxious fuck.