My advise to you to request help from someone for making your video. For example for Reactions explanation while you explain, the reaction formula not showing
hi bro, i worked in gas processing unit and i need the PFD of all SRU 's. Your explanation is elaborative and please cover the topic of analyser for SRU and TGT
in some sru process direct cooling takes place in case of process gas have impurities wheras if there is no impurities then indirect cooling takes places with aid of different ex changer where as for direct method dynawaves are used
we must have furnace temperature more than auto ignition of hydrogen sulfide u can burn at 600 degree also it is advisable to go for 1000 degree different vender different variable
Hi. Which type of pump is used for Liquid Sulfur loading arms. Is the Pump having 2 separate discharge line for liquid unloading and solid unloading of sulfur.
steam jacketed centrifugal pumps are used in one company we used submersible pump for transfer and another branch we have vertical and horizontal pump which are not submersible but both pumps will always have continuous steam to avoid solidification of sulfur. pump will have one discharge line and one mcf line for circulation to keep pump always in hot condition with flow of steam for solid prilling tower conveyor rakes are used to transfer solid sulfur as pump cannot pump solid sulfur solid sulfur is hard as 🪨 stone. molten sulfur will be load in tanker from top lid of tanker arm is withdrawn from top to the tanker sulfur tankers also steam jacketed
endress hussar flow meter ,insertion type we used 1.8 specific gravity molter sulfur flow rate is 16m3/hr then how much will be loaded can be determined by 16*1.8= 24 ton would be weight of sulfur tanker loaded
Elaborative explanation and covered most of the topic.
Thank you dear
Thank you so much for your elaboration this helps me for the last min preparation for project work.
Thanks for your support
@@chemicaldiary8412 thank you so much
Excellent briefing thanks a lot😊
Thanks and crystal clear explanation 🙂😃😃
Thanks dear
Subscribe to my channel
Thanks. It is very informative for non process engineers
Thanks for your support
What is the recommended air ratio to get elemental sulfur
Superb Explanation for the Beginners
thanks and subscribe my channel
How to take sample Acid gas, quench column and liquid sulfur?
Good explanation 👍👍
Thanks your support is highly appreciated
Very useful and I subscribed 👍
Thanks for the sub!
Sir, does the sulphur collecting pit temperature is maintained using external source because the liquid sulphur melting is 110 C
steam is used to maintain the temperature
check my other vedio for further information
Can you arrange TGTU Also with Temperature same like this units. So we will understand TGTU Also.
Please do a video on lpg recovery from natural gas
Good effort
Thank you sir
Great Explanation 👍
Glad you liked it
My advise to you to request help from someone for making your video.
For example for Reactions explanation while you explain, the reaction formula not showing
hi bro, i worked in gas processing unit and i need the PFD of all SRU 's. Your explanation is elaborative and please cover the topic of analyser for SRU and TGT
Send me your email address
Your email ✉️
Where does the water go
re use in plant
completely describe your question dear i will reply
Hello sir
Sir mujy sulfur recovery from H2S pa project mila h please Kuch data send KR Dy es topic KY releated
What's Direct and indirect method??? Can you explain in briefly??
in some sru process direct cooling takes place in case of process gas have impurities wheras if there is no impurities then indirect cooling takes places with aid of different ex changer where as for direct method dynawaves are used
2min ru equipment details
Dear, How we control temp in thermal reactor please ???
We inject LP steam to reduce the temperature of furnace
Can you share pdf
Super bro
thanks dear
DEAR FRIEND
I HAVE ONE DOUBT TEMPERATURE 1300 TO 1450 FOR WHAT
we must have furnace temperature more than auto ignition of hydrogen sulfide
u can burn at 600 degree also it is advisable to go for 1000 degree different vender different variable
I am Chemical engineer I worked in SRU plant
Hi. Which type of pump is used for Liquid Sulfur loading arms.
Is the Pump having 2 separate discharge line for liquid unloading and solid unloading of sulfur.
steam jacketed centrifugal pumps are used
in one company we used submersible pump for transfer
and another branch we have vertical and horizontal pump which are not submersible
but both pumps will always have continuous steam to avoid solidification of sulfur.
pump will have one discharge line and one mcf line for circulation to keep pump always in hot condition with flow of steam
for solid prilling tower conveyor rakes are used to transfer solid sulfur as pump cannot pump solid sulfur solid sulfur is hard as 🪨 stone.
molten sulfur will be load in tanker from top lid of tanker arm is withdrawn from top to the tanker
sulfur tankers also steam jacketed
@@chemicaldiary8412 in which Refinery you are working ?
Which type of flow meter is installed to calculate liquid Sulfur flow to loading arms.
endress hussar flow meter ,insertion type
we used 1.8 specific gravity
molter sulfur flow rate is 16m3/hr then how much will be loaded can be determined by 16*1.8= 24 ton would be weight of sulfur tanker loaded
6 min ru process start
Great Explanation sir
Thanks and welcome