@@karthicklingadurai5021 It depends on the capacity of the plant Smaller plant One plant can be taken care by one operator If bigger plant means bigger man power requirements And also it depends on what your company work they are making granulation or selling liquid sulfur or consuming for associated plant
@@chemicaldiary8412 i attended an interview for a field Operator.. nearly answered all the questions.. but he asks a question line ( SRU has 4 areas .. in which area u responsible for?? ) . That I can't answered it . Did you know what those areas may be ..
If find the leakage of H2s,wear required PpE and check the wind direction,give information regarding leakage wind direction and spot to the Shift engineer and DCS operator
A fire in the sulfur pit will be detected by a sharp rise in the pit vent temperature. SO2 concentration in the sulfur pit will increase. Once high high (HH) temperature or HH SO2 activate, pit will be isolated by stopping the educators and by closing the educator vents to atmosphere and the incinerator sweep gas flow. Immediately open manual snuffing steam valve to the pit to extinguish the fire. A brown plume venting from the stack indicates a continuing fire. Maintain sulfur sump temperature below 160 0C. Above this temperature sulfur is highly viscous and pump cannot able to develop pressure
Hi Deep Its really good informative explanation about pit temperature. If you are selling liquid sulfur to other company and no intention to use inside the plant u can maintain the temperature such that it doesn't solidify. If your company utilizes the liquid sulfur in internal plant consumption then u need to maintain such temperature to have good combustion in making sulfuric acid
Pump and machinery healthy ness Machinery sound vibrations Temperature and pressure all manually And by verifying with DCs reading Gas leak fire hazard Housekeeping Leaks And chitchatting with colleagues.
If h2s realized your h2s gas detector beeps just move away from place seeing the wind direction Once your h2s detector is beeping means u r away from h2s hazards Then inform control room about leak to stop the process then gas neutralize has to be taken place and decontamination to be done hazamat team H2s is denser so mostly it remains at ground level.
@@chemicaldiary8412 should carry the h2s gas or multigas detector before going field rounds. Should be check calibration also. Observe windsock direction
Useful information 👍
Very important topic. Thanks ❤
Thank you sir . Now i got some informations in this videos
Super bro...💥
Thanks so much sir
Very nice 👌👌👌👌
Thanks sir
Awesome video man. I’m an SRU Operator, Amine, TGU Amine based sulfur recovery unit, SWS as well.
Sir
Can you explain me
Very nice information 🙏🙏
Just one humble request to make a mechanical supervisor or engineer interview questions for the SRU
5:40
If there is a chance to isolate we will isolate the block valves degassing the gas to scrubbing system.
Very informative thank you.please upload next part.please do panel Operator interview questions.thanks in advance
Sure I will do that
Upload startup,trouble shooting,problem facing in SRU
Please mention where are we take sample in SRU and mention about sample description.
Very helpful 👍👍
Thanks dear
Subscribe to my channel
@@chemicaldiary8412how many areas in sru ? For one field Operator's responsibility
@@karthicklingadurai5021
It depends on the capacity of the plant
Smaller plant
One plant can be taken care by one operator
If bigger plant means bigger man power requirements
And also it depends on what your company work they are making granulation or selling liquid sulfur or consuming for associated plant
@@chemicaldiary8412 i attended an interview for a field Operator.. nearly answered all the questions.. but he asks a question line ( SRU has 4 areas .. in which area u responsible for?? ) . That I can't answered it . Did you know what those areas may be ..
@@chemicaldiary8412 and they are granulating Sulphur
If find the leakage of H2s,wear required PpE and check the wind direction,give information regarding leakage wind direction and spot to the Shift engineer and DCS operator
Cold startup please
Uh Explained Very Well bro , Its very Under-stable in a easy way! Bro Can you Please share the PDF Format in Email ?
Email me
I can share
Pl upload problems & troubleshooting of SRU PLANT
I will upload soon
Activate Emergency ..
A fire in the sulfur pit will be detected by a sharp rise in the pit vent temperature.
SO2 concentration in the sulfur pit will increase.
Once high high (HH) temperature or HH SO2 activate, pit will be isolated by stopping the educators and by closing the educator vents to atmosphere and the incinerator sweep gas flow.
Immediately open manual snuffing steam valve to the pit to extinguish the fire.
A brown plume venting from the stack indicates a continuing fire.
Maintain sulfur sump temperature below 160 0C.
Above this temperature sulfur is highly viscous and pump cannot able to develop pressure
Hi
Deep
Its really good informative explanation about pit temperature.
If you are selling liquid sulfur to other company and no intention to use inside the plant u can maintain the temperature such that it doesn't solidify.
If your company utilizes the liquid sulfur in internal plant consumption then u need to maintain such temperature to have good combustion in making sulfuric acid
If I get this of pdf format
What field operators checks in field round
Pump and machinery healthy ness
Machinery sound vibrations
Temperature and pressure all manually
And by verifying with DCs reading
Gas leak fire hazard
Housekeeping
Leaks
And chitchatting with colleagues.
@@chemicaldiary8412The last point is so accurate haha
SIR lease reply if h2s gas release what action will be taken
If h2s realized your h2s gas detector beeps just move away from place seeing the wind direction
Once your h2s detector is beeping means u r away from h2s hazards
Then inform control room about leak to stop the process then gas neutralize has to be taken place and decontamination to be done hazamat team
H2s is denser so mostly it remains at ground level.
@@chemicaldiary8412 should carry the h2s gas or multigas detector before going field rounds. Should be check calibration also. Observe windsock direction
I want p & id details