Dodge Charger Spyder headlights installation 2006 2010
HTML-код
- Опубликовано: 11 окт 2024
- I did not include how to take off the bumper, because there are videos about that. Just the installation and issues with it. And final outcome.
Hope this helps.
2 Things, I just installed these lights and was able to do it without cutting or trimming the bumper. After you get the old ones out you need to separate the bracket from the Spyder HL and install the bracket first then after the bumper is put back in place install the headlight. Second is the part where the side marker light socket goes in. The part that held the 194 Bulb is the part that seals that hole where the 2 wires are hanging out of. Plug the 2 connectors together, stuff the wires into the hole, push the connector in and twist. Test for polarity to make sure before you install the headlight.
Dont cut anything guys... 4 nuts on the back, take the assembly apart, install bracket, install bumper, install headlights in that order.
Is it necessary to take the bumper off ? I'm thinking you can take the old out and place the new one in?
@@chicoloec9492 With where the nuts are located you have to remove the front bumper.
Thanks Bro! I just got stuck and was about to cut the bumper, but happen to come across your post. Needless to say, I will be implementing your advise tomorrow.
I did the same thing....just removed the 4 nuts to disassemble and install without having to cut the bumper. Added benefit is it also makes it easy to pull the headlight housing back for any reason without needing to remove the bumber.
@@TheZC3000 how secure are the headlights if you do it this way? i’m slightly worried that they would fall out
This video really helped me with my headlights I couldn’t figure out where the plug-in went and was gonna start splicing and the lights didn’t come with instructions thank you
Amazing i was gone purchase these headlights last month, but wasn't sure. Really amazing job I'm convinced now thanks
Jeah the lights are very good
“Gone” purchase 🤷♀️
This video saved my life with the halo lights. Was about to pay someone to wire it up.
For people still struggling just flip it and keep trying and it worked for me.
I like that the turn signals don’t phase out the low beam while activated.
i was trying to see what these would look like on the car, nice work
Thanks. They light up good in the dark also.
Thanks. They light up good in the dark also
Dammmmmm they look great bro I’m get them for my car srt8
These particular lights make this body style charger more modern looking. I am about to pull the trigger on the vipmotoz brand just wondering if you have had any moisture issues? Your charger looks pretty good!
Hi. I have not had any issues at all with these lights. Drove through the finland winter with these lights. No moisture problems at all. Very good lights
Just installed new headlights on my charger yesterday, it was a bitch but worth it! It looks so good now
Great man. Im glad that my video seems to be helpful for many and inspiring. Yes they look great but littlebit bitch to install
@@jundesways3940 had some beers to keep me motivated. Yeah thanks bro! Makes our cars look so good. They have an aggressive stance to be faded by some yellow headlights
You did a good job. I have a 2006 3.5 I'm going to do the same thing. I'm searching for the right style. I like your English. I'm in Texas.
Thanks for the language skill comment. When rarely speak english, its slower😂
Your charger looks like a 2015 now 👌
Thanks man
good video. i was thinking about getting these for my 08, they look cool
What is that connector that goes on top to the plug for the led bar on the headlight I can’t find it nowhere my charger doesn’t have the top connector piece
You will find it on the markers you removed originally, you will have to remove it from the marker housing and remove the small bulb off the tip, then attach it as he showed on the video, plug in the led bar wire to it and there you have it ! Good luck
Great job filling the uneven gaping.
Good job
Thanks for the vid. Much appreciated
Bought me some on ebay today cant wait to get them
How did you get the halos to work. My regular headlights turn on, high beams and turn single but the beam is not lit
You ever find out?
@@sethbeasley3083 yea there’s a video out there that shows it. I can’t remember to be honest and I had got rid of the car
Nice! I’m going to buy me a pair.
Jeah. Go for it. They are good!
nice video my wife told me about the headlights but I never really digged stock light bulbs, do u know if I can put LED's in the high and low beam??
Thanks for watching. I really dont know answer to that one. I sold the car and now have mb e class 2013
They look very good.
Well done
Did you have to rewire anything ?
very cool.
Die Front mit den originalen Scheinwerfer schaut viel aggressiver aus.
What kind of bulbs you using for the low beam projectors
I didnt have to buy any extra bulbs when i changed the lights. Oem should fit or bulbs came with the lighta. I dont remember anymore
@@jundesways3940 ok was wondering, the low beams are yellow
i know this was 2 years ago lol, BUT,
Stock Headlight uses 9006 for low beam, 9005 for high beam, and T25 for turn signal
Spyder headlights use 9006 for low beam, H1 for high beam, and T25 for turn signal
so yes they are different but the bulbs that are included are halogen bulbs when buying the Spyder kit, you can buy LED's online
@alexgamer183 you 2 years late 😂😂 but thanks I got the spider headlights and led the halogens look bright as hell love them
@@PawlDunken So i have been looking at these and i was wondering can the highbeam lights even be changed?? because it looks like it was a custom install from spider, can a H1 LED even be put in there or what
Or do you just run the Halogen high beam that came with it
Hey man, do you know if you are able to put led lights in this headlights?
To these spyder lights? I dont think so. At least i cant
@@jundesways3940 oh, so you can't switch out the halogen bulbs that come with it to some bright white led bulbs?
@@jayduck75 yea you can this dude with a green charger changed his lights to green
Spyder headlights use 9006 for low beam, H1 for high beam, and T25 for turn signal
if you want LED's just go buy those sizes for the spider headlights
Special
I’m installing mine rn and idk how to do the trim signal
Just take the lights off and youll see. Its plug n play
Jundes Ways ya I figured it out the person who had it before me put custom wiring so I just had to splice some stuff lol
@@natehedrick6798 great man! There lights are awesome
🔥🔥🔥🔥🔥
Where did you get the plug in adapter at so I don’t have to splice
its on the stock side marker you have to pull the bulb out of it
🔥
Still no issues?
Bruh speak like it hurt to talk 😂
Where did you get the rubber ceiling for the lights
Well i live in finland so my answer will not help you but there is rubber and insulationstore few minutes from here
nice vid mam
Thanks mam
Oops haha man*
Were can I buy these ?
I did same thing too... I cut that too because it wouldn't fit....
Where do u get the adapter from ? I dont it at all
What adapter? All you nees is the new lights. There are all necessary parts
It isn’t an adapter bro I thought so as well just remove the old bulbs and you plug in the wire
You will find it on the markers you removed originally, you will have to remove it from the marker housing and remove the small bulb off the tip then attach it as he showed on the video, then plug in the led bar wire to it and there you have it ! Good luck
Don’t listen to this guy Because, I did and I accidentally cut some of my bumper it’s not his fault but, the other side went on just fine without cutting it at all luckily I only made a few slits in the other side where he said to cut it . because them two clip things on your fenders is push down push them back up and it will go on just fine underneath there
are they bright at night?
Yes they are good, i dont know how bright originals are, have not driven with them ever. But jeah, I will drive with these in dark winter time, so yeah
@@jundesways3940 thanks
Hi i loaded video of them in night. Look spyder headlights at night. Take a look at it thanks
Marejarvia is great
Moose and squirrel
What is the name of the adapt you used for the led connection
I didnt use any additional adapter. Stock will do
Amazing i was lost!!
Wait. My charger did not have that adapter for the led
@@orlandovega6958 did you ever find the adapter for the led light, mine didnt come with the adapter either? please let me know. Thank you.
Orlando Vega it is the bulb for the marker light. You must take the bulb out of your old marker light and use the adapter there
CAn anybody send me the link