Forgot about the trousers being shown only use them indoors I wouldn't ware them outside.. Thanks for watching. All the best for Christmas and the new year. Mick
I don't know if you have a current meter on your layout but it might be worth adding one. It might give you a heads-up when something bad is happening. As a very rough guide, 250mA per loco would probably be OK. Nothing is going to burn out unless it is drawing too much current; it's the excess current that causes overheating.
Thanks Scooter for your comment. Yes I think they are great value and detail is suburb would recommend. Merry Christmas and new year to you and family. Mick
Merry Christmas and a Happy New Year Mick. The new tankers look fantastic, I had never heard of Revolution Models before. Shame about the class 33. All the best, David.
Hello David. How are to doing and all the best for Christmas and the new year. I bet you have plenty of snow already. Thank you for the comment. Mick and Shirley
Good morning Mick Another superb video from the real Lakeside! Keep up the good work - I really enjoy these videos. My family and myself wish you and your family a Joyous Christmas and a very Happy and Healthy New Year as we await Videos 112 and upwards. Best Regards Michael
Thank you for a great comment. Glad you enjoy the video, sorry this was a short one. We wish you and your family the same. Until the new year . Take care. Mick
Hi mick, great running session, do love the revolution tanks super detailed great colors too, if your going to hornby show I’ll see you there, have great Christmas & happy new year and best wishes for 24, take care, thank you very much for all videos this year, there been amazing, take it steady, 🎉🎉🎉🎉
Hello Mark thanks again for watching and your comment. Yes a Neighbour has asked me to go so this time hopefully we will meet up. You and your family have a good one and hope to see in the new year. Mick & Shirley.
Hello Mark. I don't know what's wrong, I am unable to give you a reply. I am Ally Pally this Saturday and 27th April at the New Hornby show again a Saturday. Send message to me on my email. mick_smith20@hotmail.co.uk
sorry to hear about your blown decoder ,on all my heljan locos i have a rails of sheffield ROS-8HP RAILS CONNECT DECODER, HIGH POWERED 8 PIN HARNESS 4 FUNCTION DECODER max 3amp as they do draw a bit of current especially pulling 20 seacows happy christmas ......tony
Hi Tony. Thanks for the info. I have replaced the decoder with one from Digitrains and repaired the damage so after I do the paint work will give it a try. Merry Christmas and happy new year to you. Mick
Hi Mick Great to see a running session, nightmare with the failure of the decoder on the class 33, hope you can find a pcb online, I think Gaugemaster have spares for some locos but not everything as I tried to get gears for one of my class 05s and they couldn't help so I'm stuck. The Revolution wagons look great and a long train will look awesome. Hope you and yours have a great Christmas and New Year. All the best Paul 😊👍🖖
Hi Paul. Did try Howes and Gaugemaster with no luck, but had a stroke of luck. Looked on Ebay and saw a PCB foe a Heljan 47. To me it looked liked the one I had in the 33. on checking this it was the same board. It just so happens I had one in my draw from a 47 I scrapped early in the year due to it's body developing large cracks. Already fitted and it works. Happy new year for 2024. Mick
Great looking tanker wagons Mick, price wise are they the same as other manufactures. Hope you are able to get your class 33 up and running, wishing you and your family a very Merry Christmas and all the best for 2024, take care regards Barry..🎅🍺
Thank you Barry for your comment. I would expect to pay this price from Accurascale which I think is a good price. Bachmann I would think would be much more jugging by this years prices. All the best for Christmas and the new year. Mick
Hi Michael, they are nice tank wagons and price wise very competitive with other manufacturers I bought 10 last week had to send 1 back with a loose weight inside keep derailing rails are posting another one tomorrow shame about your 33 think it might have been to many sea cows there quite heavy I had the same problem with a Bachmann 37 cheers Al
Yes I agree I think it was to much for the decoder, should have double headed. Hope to be able to repair if I can get the spare board. Wishing you all the best for Christmas and the new year. Mick
Yes I agree I think it was to much for the decoder, should have double headed. Hope to be able to repair if I can get the spare board. Wishing you all the best for Christmas and the new year. Mick
Hi. Your most likely right, was also a cheapish decoder but Heljan are known to draw a lot of current. Merry Christmas and thanks for the comment. Mick
Hello again Matthew. Hope you and the family are good and looking forward to Christmas. Sorry it was a short one but I need to do one to thank every one for there support over the year. Will give the boredom basher some thought in the new year. Thanks again for your support as always. Happy new year to you all. Mick
![VICTOR Denmark Open 2024 | An Se Young (KOR) [1] vs. Gregoria Mariska Tunjung (INA) [5] | SF](http://i.ytimg.com/vi/Y3QEyCih85s/mqdefault.jpg)
![OhGeesy x Lefty Gunplay - What It Iz [Official Music Video]](http://i.ytimg.com/vi/L0yzW9t2ixk/mqdefault.jpg)
Happy Christmas, and happy modelling 👍
Thanks Mark same to you. Mick
Whoa!. Wasn't ready for those trousers and the jumper. Cheers Mike, take care and all the best to you.
Forgot about the trousers being shown only use them indoors I wouldn't ware them outside.. Thanks for watching. All the best for Christmas and the new year. Mick
I don't know if you have a current meter on your layout but it might be worth adding one. It might give you a heads-up when something bad is happening. As a very rough guide, 250mA per loco would probably be OK. Nothing is going to burn out unless it is drawing too much current; it's the excess current that causes overheating.
Thanks Ian. I do have a Alpha meter and will check the voltage when I fit the new decoder and give it a run. Merry Christmas. Mick
Cracking review of the Revolution wagons, they look very good.
Good luck with the 33 rebuild.🤞
Merry Christmas and Happy New Year.👏
Thanks Scooter for your comment. Yes I think they are great value and detail is suburb would recommend. Merry Christmas and new year to you and family. Mick
Merry Christmas and a Happy New Year Mick. The new tankers look fantastic, I had never heard of Revolution Models before. Shame about the class 33. All the best, David.
Hello David. How are to doing and all the best for Christmas and the new year. I bet you have plenty of snow already. Thank you for the comment. Mick and Shirley
Good morning Mick
Another superb video from the real Lakeside!
Keep up the good work - I really enjoy these videos.
My family and myself wish you and your family a Joyous Christmas and a very Happy and Healthy New Year as we await Videos 112 and upwards.
Best Regards
Michael
Thank you for a great comment. Glad you enjoy the video, sorry this was a short one. We wish you and your family the same. Until the new year . Take care. Mick
Hi mick, great running session, do love the revolution tanks super detailed great colors too, if your going to hornby show I’ll see you there, have great Christmas & happy new year and best wishes for 24, take care, thank you very much for all videos this year, there been amazing, take it steady, 🎉🎉🎉🎉
Hello Mark thanks again for watching and your comment. Yes a Neighbour has asked me to go so this time hopefully we will meet up. You and your family have a good one and hope to see in the new year. Mick & Shirley.
Hello Mark. I don't know what's wrong, I am unable to give you a reply. I am Ally Pally this Saturday and 27th April at the New Hornby show again a Saturday. Send message to me on my email. mick_smith20@hotmail.co.uk
Perfect timing Mick, I was looking at these at Hattons and they do look great. Time to spend some money I think. Merry Christmas
Thanks Tony. Don't buy to many I need some more. All the best for Christmas and the new year and thanks for watching. Mick
sorry to hear about your blown decoder ,on all my heljan locos i have a rails of sheffield ROS-8HP RAILS CONNECT DECODER, HIGH POWERED 8 PIN HARNESS 4 FUNCTION DECODER max 3amp as they do draw a bit of current especially pulling 20 seacows happy christmas ......tony
Hi Tony. Thanks for the info. I have replaced the decoder with one from Digitrains and repaired the damage so after I do the paint work will give it a try. Merry Christmas and happy new year to you. Mick
Hi Tony. I have purchased the decoders from Rails and fitted them to al the class 33's . Thanks again. Mick
hello mick sad about 33 nice loco ,on ,
BR in the day you have 2 class 33 pulling that load of sea cows so heavy like wagon nice video nice christmas
Thanks for watching and your comment. Yes that's what I should have done, run a double header. Still it is repairable. Have a good Christmas. Mick.
Hi Mick
Great to see a running session, nightmare with the failure of the decoder on the class 33, hope you can find a pcb online, I think Gaugemaster have spares for some locos but not everything as I tried to get gears for one of my class 05s and they couldn't help so I'm stuck.
The Revolution wagons look great and a long train will look awesome.
Hope you and yours have a great Christmas and New Year.
All the best
Paul 😊👍🖖
Thanks Paul for your comment. I think I'm right in saying Howes model do spares so I hope I can find the part. Have a good one. Take care. Mick
Hi Mick
Try Howes but I'm sure Gaugemaster are now doing spares for Heljan. 👍
Hi Paul. Did try Howes and Gaugemaster with no luck, but had a stroke of luck. Looked on Ebay and saw a PCB foe a Heljan 47. To me it looked liked the one I had in the 33. on checking this it was the same board. It just so happens I had one in my draw from a 47 I scrapped early in the year due to it's body developing large cracks. Already fitted and it works. Happy new year for 2024. Mick
Cool video
Thanks very much. wishing you a merry Christmas and a happy new year. Mick
Great looking tanker wagons Mick, price wise are they the same as other manufactures. Hope you are able to get your class 33 up and running, wishing you and your family a very Merry Christmas and all the best for 2024, take care regards Barry..🎅🍺
Thank you Barry for your comment. I would expect to pay this price from Accurascale which I think is a good price. Bachmann I would think would be much more jugging by this years prices. All the best for Christmas and the new year. Mick
Hi Michael, they are nice tank wagons and price wise very competitive with other manufacturers I bought 10 last week had to send 1 back with a loose weight inside keep derailing rails are posting another one tomorrow shame about your 33 think it might have been to many sea cows there quite heavy I had the same problem with a Bachmann 37 cheers Al
Yes I agree I think it was to much for the decoder, should have double headed. Hope to be able to repair if I can get the spare board. Wishing you all the best for Christmas and the new year. Mick
Yes I agree I think it was to much for the decoder, should have double headed. Hope to be able to repair if I can get the spare board. Wishing you all the best for Christmas and the new year. Mick
What voltage are they pulling? That could be your problem!
Hi. Your most likely right, was also a cheapish decoder but Heljan are known to draw a lot of current. Merry Christmas and thanks for the comment. Mick
Another great video Mick over too fast! Any chance of another boredom basher? Merry Christmas to you and your family Mick 👍🏻
Hello again Matthew. Hope you and the family are good and looking forward to Christmas. Sorry it was a short one but I need to do one to thank every one for there support over the year. Will give the boredom basher some thought in the new year. Thanks again for your support as always. Happy new year to you all. Mick
@@michaelsmith-hn1cn Good luck on the model-u front, great picture and you’ve got my vote 😉
Happy Christmas mick
Thank you and I wish you the same. Mick