4 3/4 x 4 3/4 x 7 2LS. Drilling the fingers deeper will just magnify whatever changes you’re making to the ball. Changing RG or Diff depends on where the holes are going into the ball. The goal for this one was to lower overall Diff.
Mikey. Since you are using your thumb again, i have a question about using a thumb sleeve as compared to thumb tape. Is one better than the other? I have been using tape.
I'm a 2H lefty (18 mph off the hand and 430 rev rate) have the following low differential balls and layouts: IQTS: 4.5 x 4.5 x 3.5 Hyped Solid: 5.25 x 3.5 x 3.5 Hustle RIP: 5.25 x 3.5 x 3.5 What kind of layout can I put on the Tour Dynam-X to create more of a gap between them? And with all the balls at box surface, what order would be best to throw them in a typical league set? My house is medium length/volume and lower friction than other Vegas centers.
So it’s like an IQ with an asym core with the numbers. Good god I can’t decide between the exponent or this one for my bag. It’s hard cause it would go into the ball down from the reality but ball up from the iq solid. And then comes the zen master on where that would go for me with these 2
When Chris says deep holes is he talking about 2 3/4 inches the deepest 2ls says to drill or is he talking about 4 1/2 inches the deepest holes can go?
@@tvbowlingsupplyis this something Chris does often? Or is it a new adjustment because of the urethane rule? Idk about anyone else but hole depth is the one thing I never hear talked about but I know from personal experience the depth makes a big difference.
Partially due to the new urethane rule but definitely not the first time it’s been done. Thought this would be the perfect ball to have a smooth option!
darren himself even said that mikey throws the ball better, he said that he plays the game of bowling itself better though, whatever u wanna interpret that as lol
Short pin to pap is going to give you more of a urethane shape. 1.5 to 2 inch pin to pap. Not sure why more tour players don't drill stuff like this if they want early read and tamer down lane reaction like you get out of urethane.
I'll say it. I prefer watching Mikey bowl. Don't get me wrong, I'd watch either, but there's just something classic about Mikey's form. Of course, I'm also a fan of watching Darren too.
Tell them they need to put a couple extra pins in Lane 31. There's no reason the machine should be sitting at 180 degrees after a strike for that long.
Love the Initial D jersey!
the inital D jersey kicks ass! awesome bowling too
No 2 hands micky?
Wondering same thing
I'm looking forward to trying this, the clone, and the summit next week at Holiday.
I'll be at Holiday as well! Also looking forward to the Clone and Summit.
Hey what's ur layouts for the no thumb drills
Hey Chris, that 2nd drill ball, you said 4 1/2", what is the other numbers in 2LS?
Whats the full layout on the second ball for chris? 4¾ × ? × ?
Yeah I was wondering about this too.... Looks like the 3rd number is at least 6" pin to COG
@Alldayertexas given cog is basically on the mass bias its probably 4¾×?×6¾
Great numbers..... Come on Chris.... What's the final numbers? Also, when drilling deep finger holes is that to raise the RG?
4 3/4 x 4 3/4 x 7 2LS.
Drilling the fingers deeper will just magnify whatever changes you’re making to the ball. Changing RG or Diff depends on where the holes are going into the ball. The goal for this one was to lower overall Diff.
It was awesome getting to see you guys at the Lucy this past weekend!
Is this a good ball for a 2 handed needing control on a house shot? Iq ruby too sharp and reactive to the dry spots
Does Holiday have 0 oil on them anymore? Haven't bowled there in years, but I always notice how deep everyone plays even with mild balls.
Mikey. Since you are using your thumb again, i have a question about using a thumb sleeve as compared to thumb tape. Is one better than the other? I have been using tape.
Looking forward to you guys having an online store
I'm a 2H lefty (18 mph off the hand and 430 rev rate) have the following low differential balls and layouts:
IQTS: 4.5 x 4.5 x 3.5
Hyped Solid: 5.25 x 3.5 x 3.5
Hustle RIP: 5.25 x 3.5 x 3.5
What kind of layout can I put on the Tour Dynam-X to create more of a gap between them? And with all the balls at box surface, what order would be best to throw them in a typical league set? My house is medium length/volume and lower friction than other Vegas centers.
I love the Tour Dynamics. I rolled my first 279 with that ball 🫡
My Tour Dynamic after about 5 frames doesn’t want to make the corner Would you suggest a surface change???
Just had one of my better nights using the tour dynamx for the first time last night. It’s an excellent ball
THAT SHIRT U WARE . COOOLLL
I'm a big fan of you Chris via
Is that a Initial D theme jersey?
I have a similar layout on my Zen Pearl like Via's second Tour Dynam-x
takumi 86 jersey is FIRE
I plan to add this to my bag
So it’s like an IQ with an asym core with the numbers. Good god I can’t decide between the exponent or this one for my bag. It’s hard cause it would go into the ball down from the reality but ball up from the iq solid. And then comes the zen master on where that would go for me with these 2
When Chris says deep holes is he talking about 2 3/4 inches the deepest 2ls says to drill or is he talking about 4 1/2 inches the deepest holes can go?
4 1/2”!
@@tvbowlingsupplyis this something Chris does often? Or is it a new adjustment because of the urethane rule? Idk about anyone else but hole depth is the one thing I never hear talked about but I know from personal experience the depth makes a big difference.
Partially due to the new urethane rule but definitely not the first time it’s been done. Thought this would be the perfect ball to have a smooth option!
That ball looks good 👍🏾
How would you guys compare this to a hyped solid
Definitely stronger! Earlier and more overall motion.
I'm honestly surprised Michael Tang, Doesn't have any Tour titles! he throws the ball so good! In my opinion better than Darren!
darren himself even said that mikey throws the ball better, he said that he plays the game of bowling itself better though, whatever u wanna interpret that as lol
Short pin to pap is going to give you more of a urethane shape. 1.5 to 2 inch pin to pap. Not sure why more tour players don't drill stuff like this if they want early read and tamer down lane reaction like you get out of urethane.
It doesn’t get quite the desired reaction for what the tour players bowl on
I'll say it. I prefer watching Mikey bowl. Don't get me wrong, I'd watch either, but there's just something classic about Mikey's form. Of course, I'm also a fan of watching Darren too.
Tell them they need to put a couple extra pins in Lane 31. There's no reason the machine should be sitting at 180 degrees after a strike for that long.
looks kinda like the IQTS
no more 2 hands? xD
I want to get it but my wife will kill me if I get any more balls lol
They should rename it to Tour Dynam-xxxxxxxxxxxx
Used underwear or new, it makes a difference if youre gonna get my subscription
Thumb hole? Next lol