I can't thank you enough! I was literally on the verge of tears lol. To think the fix was as simple as locking the friggen blade. Feeling a mix of emotions right now. Happy that I can finally start making decals, and pissed that I made such a simple mistake lol. Thank you thank you thank you again!
I use these settings for autoblade and vinyl + cutting mat. (My machine is Cameo 3) Depth 2, Speed 1 (speed for vinyl should always be 1, specially when doing intricate designs), and Strength/Pressure 15. So 2, 1, 15. When trying different materials always start with lowest number and rise it by 1 until you get desired cut. Sometimes the pressure (last setting) is also important to do a good cut together with a low number on the autoblade. You'll get the feel of it once you test different thick materials and then you can calculate the settings by the thickness/previous experience. Cameo is an awesome machine I love it!
I know you keep hearing this, but THANK YOU, THANK YOU, THANK YOU!!!!! I've had my Cameo 3 for 2.5 years and have been having this problem, right out the start gate. My blade was sitting exactly like your first example. It looked "in" all the way to me! After 2 years of disappointment, I'm so very excited to use this cutter. I've been designing things that I had no knowledge of how to cut. I'm definitely having a yahoo moment because of you.
Thank you so much! I was so frustrated! Mine was not cutting deep enough. I tried a new blade, a new mat, deeper settings and finally updating my firmware is what did it. Thank you!
I never comment on anything, but I HAVE to say... you are a LIFESAVER. Thank you SO MUCH for this video. I have a Portrait and even though my gap was tiny, it was enough to destroy everything it touched. Thank you thank you thank you! I can't believe I didn't notice this myself!
What a life saver you are. After trying several times and not being able to even cut thru copy paper I turned to you(I have been watching you since I ordered my Portrait 2) Yep, my blade was not seated all the way down! Thank you so much🙏🏻👍
Thank you, Thank you, Thank you, just when I thought I was gonna go crazy, yep I'm your typical newbie, must've winged it on the first go and then bam wouldn't cut properly. Thanks again great tutorial, I have my sanity back.
I was wondering why I kept having to readjust my cut settings all the time! It was driving me mental. You're a lifesaver, I had no idea. Thanks!! After reading through the comment section, I see you were right about us, typical starter problem. Hahaha. From the bottom of my sanity, Thank you!!
Even though some of my cuts were fine and worked as expected, my BLADE WAS NOT IN THERE CORRECTLY!!!! THANK YOU!!! Looking forward to more consistent cuts!
Girl I am literally going to cry I have watched video after video and nothing was helping and I was so upset I watched ur video and you taught me so much I am so great full
Thank you so so much, I had no idea what the hell was going on with my cameo cutter, i was actually about to take it back to the manufacturer to get it checked. You are awesome, keep sharing these videos as it serious helps a lot of people...
OMG!!! I was wondering why all of a sudden it started cutting all the way through my vinyl and my mat! I just paused this video and went to check and sure enough! There was a gap. I wonder if it got loose or something. THANK YOU!!!!!
Thank you sooooooo much for this video. I was about to have a fit with this silhouette cameo 3 cutting too deep. Your video is the first out of I don't know how many I have watched that actually did the trick. Thank you again for sharing your knowledge.
I just have to tell you that you are a godsend! You speak my language which makes taking something so technical and making it actually work doable!! Thanks!
Was on my Silhouette Cameo 3 for hours i could not get it to cut all the way through, then it was cutting the vinyl into pieces. Then it quit cutting at all. I will try again in the morning. Thanks for sharing.
Hi, we are now in 2020 and I want to thank you from deep of my heart! I was struggling with my cameo4 until I found your video. Thank you so so so much! I can't believe I fix it.
Thank you so much for explaining this. My auto blade cut right through my mat. I have been using Silhouette machines for ten years and never seen this issue before. I figured it was my fault, but didn't know what it was. My auto blade was tightly put in though so I hope that it will adjust right now when I removed it and put it back in. If this doesn't help I just have to use my old cut blade with my old Cameo. Have to get a new mat too as it was sliced through the middle and I taped it with some duct tape from the back so it doesn't bend. I love my Cameo 3 anyway, cause it's pink :)
OMG, thank you so much!!! I just upgraded from the 2 to the 3 and I was ready to throw this thing away. You are the best. That fixed the problem it was not cutting my HTV vinyl at all. Now it cuts perfectly.
Great vid. I’m trying to cut rhinestone material but the blade makes all the noise then stays on 0. Also it cuts half on the design fine sometimes but then doesn’t cut the rest of design at all !!! Weird.
Hello Bravo for your info. I had a problem. My auto blade did not cut. I could watch all the videos nothing to do until I noticed that I put my cutting mat too far to the left and I prevented the blade from tapping in the small hole in order to adjust. After that everything was going great. Here is
Hi I'm hoping you can help me please, I have a Cameo 3 and the left side of where the blade goes in is cracked. I was working on a couple small projects when it popped up. so I let the cameo finish the job it was cutting and removed the blade house and saw it, :( is this part replaceable and what is the proper name for it. or is there a video to show how to fix it, please I'm desperate, Thank you
Hello there, thanks for this video; I think you should fallow up with how to change or fix the cutting strip. (I looked at your videos and didn't find anything to that extend) I had the issues you describe in this video, ended up IM with someone and they were very helpful, BUT, my mat is cut all the way thru and even the cutting strip has a long gap of about 3 millimeters deep. Now my blade gets stuck in that gap (Or at least thats what I think is happening) Thanks for your efforts to help! Liz
hi! i have a question. i put offset to my sticker and when i print and cut, the offset i made is not even. i mean the spacing from right side is bigger than the left side. do you know whats the problem?
I tried all of your great suggestions but my autoblade was still cutting too deep, and it was tapping around to 1 correctly, firmware was up to date etc. (I started to wonder if I had label paper that was too thin for the machine or something!) But I remembered I had also purchased a deep cut blade. So I had a look at how far its blade stuck out at 1 in comparison to the autoblade at 1. The autoblade stuck our more. Also even when the autoblade was at 0 it still stuck out a lot. I had purchased a second autoblade too and it was the same. So I tried cutting with the deep cut blade set to 1 and force 1. And bugger me if it didn't work perfectly! So I tried manually clicking the autoblade to 0, put it back in the machine and told the machine it was a ratchet blade instead. It managed to do the kiss cut I wanted! So then I set the autoblade to 0 again with my finger (and cut myself :) lol ) and then pushed the blade down hard on my desk. I think it had helped push the blade up a little into the housing. So now I am achieving a kiss cut with the blade set to autoblade. Anyway for those of you have trouble with the autoblade cutting too deep, even on 1 give this a try. Set the base of the autoblade to zero with your fingernail, then pop in it the cameo as usual. But in the studio program, tell the software it is a ratchet blade and see if it works for you.
Yes yes yes. Thank you Thank you Thank you. I love you Melissa. I just purchased my Cameo 3 bundle and was ready to throw it out the window. Problem solved. 02/28/19. Smooches.
Hi Melisa thank you for all your tutorials have been a subscriber for quite some months now. Today my cameo has given me a hard time and cannot find any tutorial on why my blade has shifted to the right. How do I reset it to the default position?
Turn the machine off and unplug it then with your hand move the carriage all the way to the right then the left - do that 3 times. Then plug back in and power on and it should reset.
Damn - I am having the oposite issue - I just got a Cameo 4 but can't get it to cut all the way through sticker paper - and have gone over the same sheet 3 times. It's not too thick or anything - just cant get the blade to go all the way throug. Tried to redo my blade and doesn't work. ugh.
Tell me again what blade you used for the tiny stuff. And how can I get another one of those handy gadgets for taking the end of the auto blade off for cleaning. It is a white tool with 2 holes on it. After watching a video about cleaning my auto bIade I discovered I apparently got one with my cameo. I guess I misplaced it not knowing what it was for!
So the autoblade does NOT need to be set to any specific number before putting it into the machine? How does the machine know where the blade is set? I've always wondered this. I don't use the autoblade because I don't understand it.
Help, I have been trying to cut HTV for hours with no success. I have used the auto blade but cannot get the settings correct. It seems to just skim the surface and doesn’t cut. Have not had a problem with other vinyl. What settings should I be using on Cameo 4. I just received my machine for Christmas so my blade is new.
I just got my cameo 4 and it is not cutting even the test run for 651 vinyl. Tho, I pick the right material and autoblade. I was able to use it yesterday for 641 vinyl . Need help
So is my sticky mat considered ruined? I did a whole page 12x12 with lots of little cuts and my whole mat is cut through. I thought maybe it was normal ☹️ ugh.
Make sure the clip that you push in to lock it is lifted up a bit because that also causes a gap and it’s not really explained in any videos that you watch
My blade was cutting thru my vinyl and backing....AND thru my MATT! It was cutting perfectly for weeks. I will certainly try it. Now I am afraid to use a new mat because I have destroyed the first mat :(. I might cut without a mat this time. Also, for some reason, what I see on my screen is not cutting in the right spot on my vinyl? Instead of starting at left....it is off my vinyl on the top or cutting all the way over on the right. Frustrated.
trying to cut chip board with the ratchet blade on the silhouette 3, and its cutting out cuts the first pass fine but when the 2nd pass, its moves over and is cutting out side the registration box on the matte. so its not cutting in the same spot. can you help? or tell me how to re calibrate it?
New issue unlocked. Selecting the correct depth is good. My problem is that it does not reset it properly. So if i manually reset the blade and then run the cut, it works. After that, if i want to cut something else, if i don't manually reset the blade, it will not reset it and it will go for example from 3 (the last setting i had) t=+ the new setting (let's say 5) so it will cut at 8.
My Cameo 4 is cutting wrong every time. I’ve cleaned the sensor, adjusted the light to super bright, made sure the cutting tool is installed correctly. I’m trying to cut kits I buy on Etsy for my planner. I’m at a complete loss as to what to do next. Help!!!
i just got my cameo 3, and i somehow got the beta version installed, and now my cameo won't load,does anyone have a solution for this? or is this not even the reason my machine won't load?
What do you do when the blade is properly installed and when it goes to cut the blade slide up and dose not cut? You can pull the blade out even with the lever pushed in to lock the blade
I can't thank you enough! I was literally on the verge of tears lol. To think the fix was as simple as locking the friggen blade. Feeling a mix of emotions right now. Happy that I can finally start making decals, and pissed that I made such a simple mistake lol. Thank you thank you thank you again!
I use these settings for autoblade and vinyl + cutting mat. (My machine is Cameo 3)
Depth 2, Speed 1 (speed for vinyl should always be 1, specially when doing intricate designs), and Strength/Pressure 15. So 2, 1, 15. When trying different materials always start with lowest number and rise it by 1 until you get desired cut. Sometimes the pressure (last setting) is also important to do a good cut together with a low number on the autoblade. You'll get the feel of it once you test different thick materials and then you can calculate the settings by the thickness/previous experience. Cameo is an awesome machine I love it!
I have the same and am using the oracal 751c vinyl. I had to have force down to 2 as 15 cuts the backing. Also its brand new.
Thanks
I know you keep hearing this, but THANK YOU, THANK YOU, THANK YOU!!!!! I've had my Cameo 3 for 2.5 years and have been having this problem, right out the start gate. My blade was sitting exactly like your first example. It looked "in" all the way to me! After 2 years of disappointment, I'm so very excited to use this cutter. I've been designing things that I had no knowledge of how to cut. I'm definitely having a yahoo moment because of you.
Thank you so much! I was so frustrated! Mine was not cutting deep enough. I tried a new blade, a new mat, deeper settings and finally updating my firmware is what did it. Thank you!
I had a Cricut in my Amazon cart. Omg... you saved the day!! Who knew something so simple would fix everything!!!!
I never comment on anything, but I HAVE to say... you are a LIFESAVER. Thank you SO MUCH for this video. I have a Portrait and even though my gap was tiny, it was enough to destroy everything it touched. Thank you thank you thank you! I can't believe I didn't notice this myself!
What a life saver you are. After trying several times and not being able to even cut thru copy paper I turned to you(I have been watching you since I ordered my Portrait 2) Yep, my blade was not seated all the way down! Thank you so much🙏🏻👍
What did u change to get it to cut through htv
Thank you, Thank you, Thank you, just when I thought I was gonna go crazy, yep I'm your typical newbie, must've winged it on the first go and then bam wouldn't cut properly. Thanks again great tutorial, I have my sanity back.
I was wondering why I kept having to readjust my cut settings all the time! It was driving me mental. You're a lifesaver, I had no idea. Thanks!!
After reading through the comment section, I see you were right about us, typical starter problem. Hahaha. From the bottom of my sanity, Thank you!!
Even though some of my cuts were fine and worked as expected, my BLADE WAS NOT IN THERE CORRECTLY!!!! THANK YOU!!! Looking forward to more consistent cuts!
Life saver. I just couldn’t understand why my cuts wasn’t coming out right. Thank You
Omg we were going crazy.. Thank u so much 20 yards later we got it
Girl I am literally going to cry I have watched video after video and nothing was helping and I was so upset I watched ur video and you taught me so much I am so great full
OMG! I had given up and stored my silhouette away. Thank you so much!
This fixed my issue! I think of myself as a power user, but I still made this mistake. Thank you!!!
You know that moment in Christmas Vacation where they figure out why the Christmas lights won't work?! I feel like that! THANK YOU !
LOL
u are the best person ive came across on utube explaining n fixing my problem love u keep vids coming
Thank you so so much, I had no idea what the hell was going on with my cameo cutter, i was actually about to take it back to the manufacturer to get it checked. You are awesome, keep sharing these videos as it serious helps a lot of people...
OMG!!! I was wondering why all of a sudden it started cutting all the way through my vinyl and my mat! I just paused this video and went to check and sure enough! There was a gap. I wonder if it got loose or something. THANK YOU!!!!!
Yep...I was one of the 75% that you spoke about! Wasted a bit of paper but I'm so glad I found your video! I just fixed the blade.
Thank you sooooooo much for this video. I was about to have a fit with this silhouette cameo 3 cutting too deep. Your video is the first out of I don't know how many I have watched that actually did the trick. Thank you again for sharing your knowledge.
I just have to tell you that you are a godsend! You speak my language which makes taking something so technical and making it actually work doable!! Thanks!
Was on my Silhouette Cameo 3 for hours i could not get it to cut all the way through, then it was cutting the vinyl into pieces. Then it quit cutting at all. I will try again in the morning. Thanks for sharing.
OH GIRL, I WAS ABOUT TO GIVE IT UP ALREADY YOU JUST SAVED MY LIFE
Hi,
we are now in 2020 and I want to thank you from deep of my heart! I was struggling with my cameo4 until I found your video. Thank you so so so much! I can't believe I fix it.
Thank you so much for explaining this. My auto blade cut right through my mat. I have been using Silhouette machines for ten years and never seen this issue before.
I figured it was my fault, but didn't know what it was.
My auto blade was tightly put in though so I hope that it will adjust right now when I removed it and put it back in.
If this doesn't help I just have to use my old cut blade with my old Cameo. Have to get a new mat too as it was sliced through the middle and I taped it with some duct tape from the back so it doesn't bend.
I love my Cameo 3 anyway, cause it's pink :)
OMG, thank you so much!!! I just upgraded from the 2 to the 3 and I was ready to throw this thing away. You are the best. That fixed the problem it was not cutting my HTV vinyl at all. Now it cuts perfectly.
Thank you,because I was going crazy!! This video saved my projects.
Glad I could help!
Thank you very much. I understand it wayyy better now. Can't wait to get home from work to try this.
This completely solved my problem, I had a tiny gap when I put in the blade.
OMG!!!! Thank you SOOOOO much for this video! I was about to through the WHOLE Silhouette AWAY!!
I am amazed. I was having so many issues with this and you have just saved my life!
You are a VINYL SAVER. Thank you very much!!!
Glad to help!
Thank you very much for the video. Check my blade pushed down all the way and now it’s beautiful
So helpful! I almost wasted 48” of vinyl lol. I’m glad I did a practice cut and watched this.
YOU JUST SAVED MY LIFE WITH THIS VIDEO. THANK YOU!
Wish I watched your video before I tried by my first cut. I did figure it out though.
Yep and I had to pull up while pushing the blade all the way down to get the gap to disappear. Thanks!
Thank you! Thank you! Thank you! You just saved my sanity!!
Glad I could help!
Great vid. I’m trying to cut rhinestone material but the blade makes all the noise then stays on 0. Also it cuts half on the design fine sometimes but then doesn’t cut the rest of design at all !!! Weird.
Thank you for sharing! My cameo doesn’t cut deep enough on only 1 side of my design. The left side no matter the design. It’s so weird.
Mine cuts too deeply on the top and right, none at all on the left and bottom.
What speed and stuff do you put it on for glossy vinyl?
You just saved my nerves.. I could literally cry❤️
Hello Bravo for your info. I had a problem. My auto blade did not cut. I could watch all the videos nothing to do until I noticed that I put my cutting mat too far to the left and I prevented the blade from tapping in the small hole in order to adjust. After that everything was going great. Here is
Oh my goodness!! That was definitely what the problem was! I am so glad you posted this. Thank you!!!! I was having tantrums over here!! LOL!
Great video, helped me set my blade first time after watching this!!! Thank you
THANK YOU! THANK YOU! THANK YOU! Just what I needed to KNOW..maybe I will keep it now😆😆
it works.... thank you very much.... i was so happy my problem is fix... thank you very much
thank you for the great info! Just grabbed a Cameo 4 and this really helped out! Thanks! Keep it up.
Youa re a genius! thanks i was losing my mind!
Thank you omg... I just got a silhouette and that's exactly how my newbie ass put my blade in with the gap and it couldn't cut shit properly.
THANK U AFTER 2 DAYS I FINALLY GOT IT TO CUT ❤
Hi I'm hoping you can help me please, I have a Cameo 3 and the left side of where the blade goes in is cracked. I was working on a couple small projects when it popped up. so I let the cameo finish the job it was cutting and removed the blade house and saw it, :( is this part replaceable and what is the proper name for it. or is there a video to show how to fix it, please I'm desperate, Thank you
I love your videos and Thank You for helping and sharing with us! I would love to know where you got your weeding tool!? Thank you!
Omg! I freaking love you its back to normal THANK YOU JESUS & Thank you mam....
Yay!!!
bruhhhh 10 vinyl sheets ruined and I found this video.....thank you
Love your positivity
Thank you so much! I was on the verge of launching it against a wall.....
Thanks! Just fixed my problem watching this video!
Hello there, thanks for this video; I think you should fallow up with how to change or fix the cutting strip. (I looked at your videos and didn't find anything to that extend)
I had the issues you describe in this video, ended up IM with someone and they were very helpful, BUT, my mat is cut all the way thru and even the cutting strip has a long gap of about 3 millimeters deep. Now my blade gets stuck in that gap (Or at least thats what I think is happening) Thanks for your efforts to help! Liz
hi! i have a question. i put offset to my sticker and when i print and cut, the offset i made is not even. i mean the spacing from right side is bigger than the left side. do you know whats the problem?
I tried all of your great suggestions but my autoblade was still cutting too deep, and it was tapping around to 1 correctly, firmware was up to date etc. (I started to wonder if I had label paper that was too thin for the machine or something!)
But I remembered I had also purchased a deep cut blade. So I had a look at how far its blade stuck out at 1 in comparison to the autoblade at 1. The autoblade stuck our more. Also even when the autoblade was at 0 it still stuck out a lot. I had purchased a second autoblade too and it was the same. So I tried cutting with the deep cut blade set to 1 and force 1. And bugger me if it didn't work perfectly!
So I tried manually clicking the autoblade to 0, put it back in the machine and told the machine it was a ratchet blade instead. It managed to do the kiss cut I wanted!
So then I set the autoblade to 0 again with my finger (and cut myself :) lol ) and then pushed the blade down hard on my desk. I think it had helped push the blade up a little into the housing. So now I am achieving a kiss cut with the blade set to autoblade.
Anyway for those of you have trouble with the autoblade cutting too deep, even on 1 give this a try. Set the base of the autoblade to zero with your fingernail, then pop in it the cameo as usual. But in the studio program, tell the software it is a ratchet blade and see if it works for you.
Hi Emily , i tried this and it worked for me so thanks !
Yes yes yes. Thank you Thank you Thank you. I love you Melissa. I just purchased my Cameo 3 bundle and was ready to throw it out the window. Problem solved. 02/28/19. Smooches.
another thanks!! Cut thru cutting mat the first time lol ordered extras!
I love my Silhouette!!
Thank you! I had the blade in, but, it stopped and I thought that was it..I pushed it down, and now it is cutting. :) LOL
Hi Melisa thank you for all your tutorials have been a subscriber for quite some months now. Today my cameo has given me a hard time and cannot find any tutorial on why my blade has shifted to the right. How do I reset it to the default position?
Turn the machine off and unplug it then with your hand move the carriage all the way to the right then the left - do that 3 times. Then plug back in and power on and it should reset.
Hello I tried this and it is still cutting to too much to the right. Any help?
Great tips, it helped me solve my problems with kiss cutting!
Great video! I love your weeding tool with the mickey head, can you tell me where you got it.
Damn - I am having the oposite issue - I just got a Cameo 4 but can't get it to cut all the way through sticker paper - and have gone over the same sheet 3 times. It's not too thick or anything - just cant get the blade to go all the way throug. Tried to redo my blade and doesn't work. ugh.
If you haven't already, save the headaches and get a CB09 blade carrier/blades
@@loudmouthpatriot8232 thanks for the tip- issue was softaware/firmware. When they updated it it was fine
Tell me again what blade you used for the tiny stuff. And how can I get another one of those handy gadgets for taking the end of the auto blade off for cleaning. It is a white tool with 2 holes on it. After watching a video about cleaning my auto bIade I discovered I apparently got one with my cameo. I guess I misplaced it not knowing what it was for!
I Like the weeding tool you use in this video, where can i get that?
So the autoblade does NOT need to be set to any specific number before putting it into the machine? How does the machine know where the blade is set? I've always wondered this. I don't use the autoblade because I don't understand it.
Help, I have been trying to cut HTV for hours with no success. I have used the auto blade but cannot get the settings correct. It seems to just skim the surface and doesn’t cut. Have not had a problem with other vinyl. What settings should I be using on Cameo 4. I just received my machine for Christmas so my blade is new.
What is a CBO9? I am brand new. I just purchased my machine today. It is still in the box.
I just got my cameo 4 and it is not cutting even the test run for 651 vinyl. Tho, I pick the right material and autoblade. I was able to use it yesterday for 641 vinyl . Need help
YOU MISS ARE A HERO!!
So is my sticky mat considered ruined? I did a whole page 12x12 with lots of little cuts and my whole mat is cut through. I thought maybe it was normal ☹️ ugh.
Make sure the clip that you push in to lock it is lifted up a bit because that also causes a gap and it’s not really explained in any videos that you watch
I load my vinyl in, when I press send it takes it all the way to the end and starts to cut.
I have the cameo 4 pro,
I am having problem with the blade only cutting half of the design I put. Please let me know what I can do to fix this
I fixed my pad from moving around, i changed the blade settings and it doesn't move around anymore.
My auto blade always calibrated to 0 even when it's on cut. What is wrong?
I don’t know
My blade was cutting thru my vinyl and backing....AND thru my MATT! It was cutting perfectly for weeks. I will certainly try it. Now I am afraid to use a new mat because I have destroyed the first mat :(. I might cut without a mat this time. Also, for some reason, what I see on my screen is not cutting in the right spot on my vinyl? Instead of starting at left....it is off my vinyl on the top or cutting all the way over on the right. Frustrated.
trying to cut chip board with the ratchet blade on the silhouette 3, and its cutting out cuts the first pass fine but when the 2nd pass, its moves over and is cutting out side the registration box on the matte. so its not cutting in the same spot. can you help? or tell me how to re calibrate it?
Thanks alot! Great video and explanation! 👍
New issue unlocked. Selecting the correct depth is good. My problem is that it does not reset it properly. So if i manually reset the blade and then run the cut, it works. After that, if i want to cut something else, if i don't manually reset the blade, it will not reset it and it will go for example from 3 (the last setting i had) t=+ the new setting (let's say 5) so it will cut at 8.
Hey there, if that happens, I recommend exactly the workaround you're referencing by setting the blade yourself like a manual blade.
Thank you! You saved my project and my mind!!!
My Cameo 4 is cutting wrong every time. I’ve cleaned the sensor, adjusted the light to super bright, made sure the cutting tool is installed correctly. I’m trying to cut kits I buy on Etsy for my planner. I’m at a complete loss as to what to do next. Help!!!
i just got my cameo 3, and i somehow got the beta version installed, and now my cameo won't load,does anyone have a solution for this? or is this not even the reason my machine won't load?
Thank you very much for saving me!!! I thought my Cameo 4 was already a goner. :(
What happens if this doesn’t fix it? I did the firmware update and followed the instructions to T. Some how my cameo 3 pressure just is weak
Hi great video but why would my silhoutte cameo cut all over my image its just cutting all over like a crazy machine thank u
Thank you beautiful..!!! you saved my day.
Good video Melissa and tip thanks
Thank you , thank you , thank you!
Thank you!!!!!! You are the best
What do you do when the blade is properly installed and when it goes to cut the blade slide up and dose not cut? You can pull the blade out even with the lever pushed in to lock the blade
Thank you. I was about to cry🤣🤣🤣.
Welcome to my daily world of cameo lol I'll get it one day lol
@@momsohard2298 yes WE will
You just saved me with this one. I thought I was going crazy./ Thanks a Million