Even though I have been doing this hobby all my life, I always love learning something from folks like you. The trick of nailing the shims to the sled is great. Thanks
Thanks for sayin'... it was actually the first time I used UV to expose residual glue on wood. Even though I know there's special glue designed to show up under normal UV I've never used that type of glue so it was a pleasant surprise that it showed up under the special high-power UV light I purchased for other purposes: www.amazon.com/dp/B08QCX1KTJ/?ref=idea_lv_dp_ov_d I'm not trying to push a tool on you but feel obligated to tell you that regular Titebond III doesn't show up so well with more typical UV flashlights like this one: www.amazon.com/dp/B01IAPUH68/?ref=idea_lv_dp_ov_d in case you decide to get a UV flashlight you'll get one that works well enough to be helpful. Best, Matt
I was one of the 3 nerds who watched the whole LEARNING/ENTERTAINING VIDEO.....and I do not understand all the negative comments...learn just like it was in Jr High School Folks, take what you need and leave the rest..... for cryin' out loud!!
It is a real eye opener, isn't it! In the housing trades there are Carpenters, Framers and Finish Carpenters. And the many other Tradesmen: Masons, Roofers, Plumbers, Painters, Plasterers/Drywall Hangers, Glaziers(window installers on high rise or steel buildings). Each of the trades learn "tricks" and "trade secrets" which identify levels of ability: apprentice, Journeyman, and Master Craftsman. I'm not a Tradesman, but I've worked with all of them: as a laborer or assistant to the Superintendent.
What an absolute MASTER CLASS in carpentry!!! Such a seemingly simple project was taken to the Next Level on every facet of the build. Every time I think your bag of tricks might have all been exposed, you turn around and demonstrate technique after technique of virtuoso wood working. There is no one else on RUclips working at this altitude. You are playing above the rim Matt!!! And thank you for sharing this with those of us who are mere mortals.
Thanks for such a glowing review on this one Mr Greg... much appreciated! I fear I may tumble from the pedestal when I venture out of my comfort zone for the next video since it gets into your realm of metal fab and welding... err, I mean grinding... so wish me luck? 😲😂😎 Best, Matt
Thanks Brian... I think this video will be the high water mark for video length here at Next Level Carpentry but it's reassuring to know it's not a total buzz kill with this one... Best, Matt
10 minutes in and I've learned at least 6 things! The shim marking for total thickness is one of those things that only seems obvious once you've seen it done. Thank you Matt.
Footstools are a lot different than drums so I'm glad to hear you've found a few useful things here Dave... can't beat that! Sorry about that one🤢 Best, Matt
@@davebullard Glad to hear it... and to think I would have cut that whole segment from the video if it weren't more difficult at that point to edit around it. Hope you find it a useful addition to your workflow! Best, Matt
Halo My name is Abdullah from the State of Kuwait By chance, I watched the video and was very impressed by the wonderful and accurate work and valuable notes in terms of safety and work, and it is worth watching I am a carpentry enthusiast and would love to learn carpentry by watching videos Thank you for this wonderful explanatory video, and I wish you a nice day, a good life, good health, and sure safety, and more progress and success my regards
Thanks Abdullah for watching and taking the time to add a comment here. I hope you find other useful videos on Next Level Carpentry Channel to help you on your journey to 'learn carpentry by watching videos'! Best, Matt
You’re explanations along the way before you get to far away from the particular step in the projects are really appreciated ! It really helps the mind (especially a bit older minds) absorb the many details, so I appreciate the time you spend in your videos, no need to apologize for US for hanging in there We are grateful to you for hanging in there for us !!
From details to safety, from do's and don'ts is already here... everything is in full details. No wonder it took full 2hrs and a half is because of all the explanations needed. Thumbs up.
All I can say is WOW... very few times I have seen detail carpentry like this, growing up there was a Master Carpenter who lived across the street from my Family home. Even in his 70's he was still in demand by the very wealthy wanting his tradecraft skills. I watched every bit of this and wasn't the slightest bored... it reminded me of my 7th Grade shop class, we had a very sharp shop teacher who taught us the fundamentals of not only woodworking, but the care of tools. I'm getting back into woodworking mainly to make a sewing cabinet for my wife. I do almost any repair around the house, I've done Mission and through those trips I've picked up a lot of skills... but, that is mainly rough work. Framing, Plumbing, electrical, roofing, cement work, tiling and even the care and repair of our groups Tools. I've picked up on and carefully watched all your jigs, compass work and ways of scribing. This is a project that has great teaching skills... I really appreciated it so much so... I got up at 3am to watch the whole episode!!! Each morning I watch a woodworking video with my coffee... this was a whole pot of coffee episode. Again, this was great I watched a Master at work!!! Thank You!
Well thanks for watching this whole 2 1/2 hour master class Bob... hope you're able to use things from this and other Next Level Carpentry videos to achieve next level results of your own on that sewing cabinet for your wife. FWIW the master class video I did for professional grade cabinet drawers might be particularly useful for the project: ruclips.net/video/UMy5RGblxkY/видео.html Best, Matt
It’s nice to see a like-minded craftsman like myself, showing others the correct way to do things as well, as being totally honest in the construction process things happen
Wow! I watched the entire video in 2 sittings and intend to watch it again. I’m 74 years old and have been working wood since I was in Jr. high shop class. I learned so much from watching you and appreciate all your tips. Since I found you I will look for your past videos. Thank you so much for your time. Best Regards Fred Thomas
Have to say the planer sled and explanation of how you set it up to give the most amount of material is world changing. It will save me so much material. Thanks a million
I know, it's amazing right? And even though there are some things I'll never to (for example, build that template with multiple cuts and CA glue was I have a handheld shaper origin CNC), a lot of them are absolutely amazing too. This sled thing omg... So good!!
Dear Matt, Boy was that an epic movie - a Mega movie by anyone’s standards. It turned out to be a textbook of unfamiliar ideas and solutions that I have never seen before put in such an elegant way. Brilliant techniques like how to flatten warped boards on a thicknesser, how to cut strange angles on the table saw, constructing a jig using thin sheet and CA glue, making tiny and ultra thin components on a table saw {without cutting your fingers off} and finally providing a superb transparent finish to a piece of wooden furniture. Never apologise if your videos run on a bit, they are worth every second of play time. Cheers.
I watched it to the end! So many useful tips packed into this! Thank you for providing this! The best things I got out of it were the detailed info on our planer sled and your fixture making tips. I've seen lots of people making planer sleds but none of them as detailed as yours and with such practical guidance. Your videos are just a trove of valuable training. Thank you!
Thanks for watching and commenting Phillip! Your appreciative comment will offset others who are sure to whine about the 20 minutes +/- of video length dedicated to that planer sled section so I really appreciate it. Best, Matt
@@ccreutzig full disclosure I deleted one whiner's comment but mostly to spare them the wrath of appreciative viewers who might disparage the whiny tone of said comment. 😉
Chapeau! Those have to be the most expensive footstools I've seen. And while I would never spend this amount of time on footstools, all the tricks in this video will come in handy in other projects. What a awesome time to be alive and have this knowledge available.
Hey TB... Thanks for reviewing my review!! 👍🏻😎 I hope viewers will evaluate both of us in considering Halcyon for their projects because of this. Like any new product use experience, water borne varnish takes a little getting used to so, where Halcyon is concerned, I tell people "if it's not working or you're disappointed, you're doing it wrong!" Makes me thankful for your tech support team to help get it right... Best, Matt
I enjoyed this master class. The use of jigs to provide precision in tendon cutting was inspirational. I would like to offer a tip that I use to prevent accidental dig in of the saw into the finished surface. I use a hotel key card which is 1/32 inch thick as a shim around the tenon. The plastic does not damage the Irwin saw teeth and the 1/32 inch stub is easily sanded smooth with an orbital sander. I have found that gas cards and some club membership cards offer the same thickness. Using them protects your identity and gives them a second life.
Fantastic video Matt. You have once again set yourself apart from all others in your explanation and execution of this project. It's a pleasure to watch you work and once again my head is full of new tricks. Thx again Darrell
Thank you for these extermely informative videos. As a hobbyist mostly learning from own experience and other youtube videos, you videos truely make me realise how much room there is to grow, be more efficient and detail oriented.
I never would have thought that I would spend two and a half hours watching someone build a stool, let alone recommending it to someone else, but here we are. :grin: (Seriously; the tips and tricks you pass on along the way make watching it well worth the time spent. Thank you for your service.)
@@NextLevelCarpentry I had never heard of you before and the length threw me off, but I thought that I would give it a chance anyways. BOY, am I glad that I did!
I can barely sit through a 2 1/2 movie, but watching every minute of this tutorial was a piece of cake! I learned and enjoyed that so much, thank you Matt! The only flaw with your work is that now those step stools are almost too beautiful to use.
That's quite a compliment thank you. I confess that actually using these footstools on the job is kind of like taking the first road trip in a new car and makes me a bit anxious... until after the first scratch and then I can calm down😅😎
Thank you Matt for sharing your “next level” techniques. After searching for plans for a shop footstool, I ran across your site and your design was pleasing to the eye and would allow for mortise and tenon experience. Deciding to follow your lead, four footstools to be gifted to son, son-in-law and nephew, along with a keeper seemed like the right number to make. After completing the first one, and fabricating most components for the others, words alone cannot express the sincere appreciation for the lessons in patience, accuracy and perseverance the video projects. Your video plan is thorough, professional and easy to navigate. For me, the 2 1/2 hour overview was just the beginning, as I spent countless reviews of the detailed individual steps throughout this project. Your work to index these steps is amazing….thank you again! In my retirement now, it is extremely rewarding to learn new and useful craftsmanship techniques. You are sincerely appreciated!
That's fantastic news William... if there were more appreciative viewers like you in the world I wouldn't open the video with a snipe at HGTV type content because you, sir, are my target audience: someone who's watching to learn and do, not those who watch expecting to be taught and entertained. Feel free to post a link to your stool/stools when complete if you want to showcase your legacy project(s). Thanks for watching... and rewatching... and sharing your grateful comment! Best, Matt
Honestly, I watch all the carpentry shows, and you are my favorite. Not only are you the most thorough, but its also very clear to me that you spend alot of time in preparation (including the narration). Most of all, you are a very humble, very genuine dude. Keep up the good work! Also, After 6 years of learning carpentry hands-on watching You-Tube, I just opened my own shop 2 weeks ago. Thanks to guys like you!
Thanks Miguel. Here's to great success as you build your new business! FWIW I was a bit anxious at the start but enthusiasm for possibilities and potential provided motivation to press on with zero regrets over the 25 years on my personal self-employed journey.
Great Jon Matt and yes I’m one of the 3 nerds that watched the entire thing till the end of the end, picked up lots of super tricks along the way, thanks !!!
Make it yet - one more nerd. Start to finish - twice. My wife thinks I am a nut. Who knows - maybe she's right. I picked up all kinds of good stuff in this lesson.
You're welcome Gene... I suspect other Channels avoid the practice if they're not getting directly compensated by the manufacturer. That's better business practice for sure but appreciative viewers like you are more important to me so thank you for that! Best, Matt
Thanks for sayin! Would you believe it took around 475 individual video clips to make this video?! Me neither... and that's not counting at least that many more that landed on the cutting room floor! Best, Matt
Once you get your mind into a templating or 'fixturing' mindset, it opens amazing potential for the types of projects you can tackle successfully IMHO. 😎
I’ve always been interested in carpentry. I probably wouldn’t do it for a living, but nevertheless it’s always fascinating watching your videos. I’ve learned a lot, thanks!
Thank you so much for this masterclass of a video Matt. I was one of the 3 nerds who excitedly watched this whole video all the way through. I learned so many new things I can’t wait to put into practice. Your thought process of how you use jigs was really eye opening for me in terms of how to create jigs for various projects. I’m an aspiring woodworker still building up my tools in my tiny garage workshop, and it’s content like this that is giving me the confidence to trek on forward.
Don't let "Matt the Nail-Bender" fool you... This is not just some footstool, but an advanced class in wood joinery and mind-boggling methodology. That stress-relief hole and chip-reliefs at each upright might seem like insignificant details; but it is these types of considerations which shows Matt's maturity in understanding the structural properties of his material. There are jigs for everything, in order to guarantee consistency. We all know that techniques can be taught, but this level insight is purely a gift from God.
taping that piece to the saw to maintain stability was the moment i needed to let you know that this is an AMAZING video and thank you for sharing it with RUclips! I am so excited that i still have over 1.5 hours of video left to watch
@@NextLevelCarpentry I can totally imagine that an apprentice/jouneyman transition would be this stool as a project. There are SO many skills in it. If you can make a good one, ✔️. For machinists they make a 123 block by HAND (no machines other than a file and a mic)😂
I learned a few tips, but , you made a three thousand dollar work shop stool. A stool made out of scraps and eyeballed dimensions might be a better time /money investment.
Depends on how you roll: if it's all about time/money invested you can always stand on the bottom of an overturned plastic bucket and spend the money you saved on a marketing campaign to try and convince people you've got the skillset to build a stool like this. FWIW I've never spent a dime on advertising my business because a reputation built on client reaction to seeing a guy show up with a piece of furniture as his work stool means I turn down far more profitable projects than I have time to take on.
Interesting point, but he is not an unplugged hand wood working channel either, but a wood project, processing wood with power tools with minimal hand wood working to achieve a product, with a high degree of accuracy and certainty when it comes time to assemble them. Only variable is the stool lengths! Your on the wrong channel for that type of wood working here! Just a diifent style of wood working going here! But we get your point! 😂
Yep, sorry, you're on the wrong channel for that. Maybe try searching "making a stool while not giving a crap" You'll probably find what you're looking for there.
Thanks for sharing insight into your level of intelligence and quality of life for 2.2 MILLION other viewers who watched this video and expanded their knowledge and skillset...
Well, I stayed until the very end. It is almost 3.00a.m. in the Malaysia. And today is 31 Dec 2024. I loved every minute of it! I learnt a great deal. Thank you ever so much. And a Happy New Year to you. GK
Witnessing the worthwhile work of those wee wanky wedges was wonderful. I will welcomely wind up watching your videos whenever I want a wealth of woodworking wisdom.
'If you're expecting to see someone who's more concerned about how their outfit's put together than the project they're working on..." You, sir, have my attention. I don't know how I ended up here in my sleep, but I actually *do* need a carpenter's / woodworker's footstool. Let'sgggoooooooo!
Always welcome comments from those who 'get it' regarding fashion vs craftsmanship... welcome to Next Level Carpentry! Have fun with your footstool build... it's a worthy project that should serve you well for decades IMHO.
I built something like this with all 1 X 12 and 1 X 4 skirts beneath the step in addition to what you have. Mine with all 90 degree angles was clearly an apprentice piece. The bad news, it was stolen with my truck in 1999, I still wait to find someone standing on MY stool!!! Bless you for showing the addition of the angles, and tenoning, which make your project very worthy.
This just happened to me today. I drew from the 'luck bag' and it missed me, but I will NEVER forget this wise advice! Thanks again, Matt: Jeff in Mid West Michigan.
Glad to hear you lived to work another day... luck/experience events like that tend to stick with you for a lifetime! FWIW I've got history in and around Saginaw... fond memories from a beautiful part of the country... Best, Matt
Love the planer board and showing all the batch cutting techniques, definitely saves time and its more accurate! Spraying since the 70s heck I thought you were only 35! Lol
Flattery will get you nowhere Brian... but I'll thank you for it all the same😁😎 Believe it or not, I started bodywork and spraying while a junior in high school circa 1972... can't even believe it's true myself. My how things have changed! I was a little concerned with how batch cutting, because I was making a whole batch of stools, would play for viewers who might only make one so thanks for mentioning it. Best, Matt
Ha! "Hold your tongue right." My dad used to say that. He gave me my first instruction in wood working sixty years ago. I miss him very much. Thanks Matt.
You're welcome David. Wish I knew where the previous generation came up with such fun/great sayings for us, don't you? You dad sounds like the kind who are missed most... glad you have fond memories to help you cope. Best, Matt
Seriously Matt, a 2.5 HR video to make a stool? I LOVED IT. When it was done I sighed, "that's it"! RUclips may not like your epic vids, but your rubbers sure do! Please keep making' 'em, and we'll keep watching' 'em. Great stools btw.
A guy like you might believe how hard it was to trim it down to 'just' 2 1/2 hours! FWIW the digital project folder has just under 500 individual video clips in it... and those are just the final takes! I probably deleted more outtakes than I kept so I'm glad to know even after all that you'll keep watchin' em! Best, Matt
I'll remember this zero clearance tip in the future. Good Job, Matt Jackson, Master Carpenter. ( I love when my GF rolls her eyes, when referring to you in your 'full title'.) I've taken to referring to other channels in this way, and trust me, they ain't all nearly so 'gracious'.
Matt your explanation and visual demonstration is what a visual student/learner needs such as myself. You have shortened my learning curve by several years. The creation of your gigs have opened up my mind on how to better set up a project let alone a repetition of cuts. Please continue your videos. I have learned so much. Thank You.
I'm honored to be part of your journey to your own next level David... there's really no short-cut but you can certainly travel more efficiently with focus and determination 😎 Best, Matt
CAPVIDEO1 The way you teach how to think and do, is invaluable on its own. But the lessons and amount of information you provide when something doesn’t go right, is just gold! That’s the stuff that separates a master carpenter from just a hood carpenter. Thank you for including ALL the details of your work process. I can’t get over how quickly you can think through and create jigs. I can’t wait until they become second nature to me too! Thank you!! 👍
Start with 'low hanging fruit' for jigs and they WILL become second nature, Henry😉😎 BTW not sure if you noticed but 'we' got 10 others to request a video showing how to make pyramid caps, instigated by your comment on the Perfect Long Holes video... working on producing that video already with hopes of publishing in the week ahead... Best, Matt
Believe it or not! I spent 2 hours, 31 minutes watching this video. I even do not spend that much in a move. Congratulations. It is another level indeed of carpentry. I Also have just found someone more detailed than me. With that I can start thinking that being detail-oriented is not a disease, as everyone treats me. But I don't talk as much as you do. Whereas my world is rather silent. I suppose it's for recording, but I never saw you drinking a drop of water. Besides your talent, you have a great throat. Your work is truly brilliant. Thank you so very much.👏🏼👏🏼👏🏼👏🏼 Oh! another 4 minutes writing.
Thanks for such an enjoyable comment Edinho... "I do not spend that much in a move" made me laugh! Thanks for watching and commenting on this one. FWIW I actually drink a LOT of water but, since it took over 2 months to shoot and produce this video there were plenty of off-camera moments for that. 😎
Thanks for lettin' me know Bob... much appreciated. Really. There's times long videos with few views can actually be depressing but as long as viewers like you find value here at NLC I'll keep crankin' em' out! Best, Matt
Such a seemingly simple project, but hiding such a wealth of beautiful and complicated joinery. All of this explained in such a way as to make it understandable to us mere mortals. Loved the use of the jigs to easily make the joints etc. A master class taken to the "Next Level" thanks Matt.
Thx for watching and commenting on this one Ray... it's viewers like you who are my only hope of success producing such long videos for a RUclips Audience which I really appreciate!
I’m a young guy that just discovered my love of woodworking. Your long form video has been immeasurable to teach the trade of your craft. Thank you for your hard work in making these videos and for passing these skills on to the next generation.
Always glad to 'meet' a next-gen woodworker... welcome to the world of woodworking at Next Level Carpentry. Hope you have time to check out other videos here, most of which are considered 'long format'. I have enthusiastic new craftsmen like you in mind in every video I produce... Best, Matt
I built a splayed leg stool with my grandfather 55 years ago. It's still supporting my ever increasing weight ;-) Love the "wee wenge wood wedges without wobble" !!
Thanks for sayin... incorporating simple templates for flush trimming complex shapes is a real game changer for woodworking IMHO. Hope the concept helps you to your own next level. FWIW this video takes the template concept to a whole 'nuther level if you're interested: ruclips.net/video/8ZfsRTWGwl8/видео.html
I;m a wannabe in this, haven't even setup a proper workshop and just watch videos from time to time to learn techniques that I could try/apply as I am creating smtn myself. This video started from autoplay and was selected by the almighty algoritm after a video of Project Farm. I barely watched, but listened through the video through the very end. DUDE, u are so good and detailed in this, but that was too much for me and I kinda got bored by all the small touches you are doing. I dig the putty knife approach, creating a jig for everything that can be 'jigged', templates, etc. However, the best part of the video was ur way of advertising the channel and and encouraging ppl to support it. And its nice that ur not demonizing the algoritm that demonetizes ur vids, but explaining the situation as it is. Love ur honesty and the way you bring tthis to the audience.... ppl on other channels are "algoritm is hell, plz pateron money cuz if i rely on youtube I aint gonna be able to afford a new $150 shirt for the next vid" and thats.... welll I dislike as they do selfadvertising. And urs was so good that If I had the patience to go back through the video to find where it was, I would rewatch that part. HEHE. U got a new sub, but I wont give u cash on patreon, sorry - I got no Patreon and no excess of money to donate to AMAZING content creators like u. KEEP UP THE GOOD WOODWORK AND PLZ DONT OVERDO IT SO MUCH IT WILL NEVER BE PERFECT...think u missed a glue leftover on one of those stools btw. :D
Beautiful craftsmanship, I really appreciate your high degree of detailed information and skill. You are a wonderful teacher and example of pride in excellence. Thank You
You can now add one more to the list of viewers who made it to the end, and a new subscriber as well, after running across another of your videos today. The level of detail is outstanding and very much appreciated. I think I learned more in this single video than I have in watching videos over the course of a week from many of the content providers I’ve seen. Thank you!
When I saw how long this video was, I wondered what or who would watch one this long.. But once I saw the wenge wedges fit into the wenge wedges slots, I wondered no more. Watching this while wanting to see more I wondered who was also watching and who would want to watch even more. Once finished, the whole world should watch this winning video. I wondered if I was willing to wade thru other videos to learn about wedges, but watching this, that thought went out of my mind. No wonder I was willing to watch the whole thing... well done my fellow wood worker....
... finally someone that EXPLAINS the project and not just shows how good he is in executing the cuts and assembly and shows the final project (without even any measurement). Happy Christmas Holidayds!!!
Matt, after that kickback I had to stop and thank you for that great idea, blue tape over the plate. Genius! It will definitely save me one day. Thanks.
Embarrassing as it is to admit I didn't forsee that little incident, you're welcome. It's my way to return the favor to those who's mishaps helped me avoid other mistakes thereby filling MY bag of experience... Best, Matt
Even though I have been doing this hobby all my life, I always love learning something from folks like you. The trick of nailing the shims to the sled is great. Thanks
that UV light trick to find residual glue makes watching the whole project worth watching!!
Thanks for sayin'... it was actually the first time I used UV to expose residual glue on wood. Even though I know there's special glue designed to show up under normal UV I've never used that type of glue so it was a pleasant surprise that it showed up under the special high-power UV light I purchased for other purposes: www.amazon.com/dp/B08QCX1KTJ/?ref=idea_lv_dp_ov_d
I'm not trying to push a tool on you but feel obligated to tell you that regular Titebond III doesn't show up so well with more typical UV flashlights like this one: www.amazon.com/dp/B01IAPUH68/?ref=idea_lv_dp_ov_d
in case you decide to get a UV flashlight you'll get one that works well enough to be helpful.
Best,
Matt
I was one of the 3 nerds who watched the whole LEARNING/ENTERTAINING VIDEO.....and I do not understand all the negative comments...learn just like it was in Jr High School Folks, take what you need and leave the rest..... for cryin' out loud!!
Congrats for nerding out and watching the whole video Robert... also for sharing a little bit of common sense about the length of this video😎
I had no idea such a simple thing would be so complicated. Mad respect for the patience of woodworkers.
It is a real eye opener, isn't it! In the housing trades there are Carpenters, Framers and Finish Carpenters. And the many other Tradesmen: Masons, Roofers, Plumbers, Painters, Plasterers/Drywall Hangers, Glaziers(window installers on high rise or steel buildings). Each of the trades learn "tricks" and "trade secrets" which identify levels of ability: apprentice, Journeyman, and Master Craftsman. I'm not a Tradesman, but I've worked with all of them: as a laborer or assistant to the Superintendent.
What an absolute MASTER CLASS in carpentry!!! Such a seemingly simple project was taken to the Next Level on every facet of the build. Every time I think your bag of tricks might have all been exposed, you turn around and demonstrate technique after technique of virtuoso wood working. There is no one else on RUclips working at this altitude. You are playing above the rim Matt!!! And thank you for sharing this with those of us who are mere mortals.
Thanks for such a glowing review on this one Mr Greg... much appreciated! I fear I may tumble from the pedestal when I venture out of my comfort zone for the next video since it gets into your realm of metal fab and welding... err, I mean grinding... so wish me luck? 😲😂😎
Best, Matt
2 and half hours...hell yes Matt. Thank you for taking the time to share your knowledge. Love the long form tutorial.
Thanks Brian... I think this video will be the high water mark for video length here at Next Level Carpentry but it's reassuring to know it's not a total buzz kill with this one...
Best, Matt
Agree.
10 minutes in and I've learned at least 6 things! The shim marking for total thickness is one of those things that only seems obvious once you've seen it done. Thank you Matt.
Footstools are a lot different than drums so I'm glad to hear you've found a few useful things here Dave... can't beat that! Sorry about that one🤢
Best, Matt
@@NextLevelCarpentry lol
The combine and conquer method however is very applicable. That one's making it into my workflow for sure.
@@davebullard Glad to hear it... and to think I would have cut that whole segment from the video if it weren't more difficult at that point to edit around it. Hope you find it a useful addition to your workflow! Best, Matt
@@NextLevelCarpentry I LOVED the attention to detail in these steps. Seems exhausting at first. But definitely 'Next Level' !
Halo
My name is Abdullah from the State of Kuwait
By chance, I watched the video and was very impressed by the wonderful and accurate work and valuable notes in terms of safety and work, and it is worth watching
I am a carpentry enthusiast and would love to learn carpentry by watching videos
Thank you for this wonderful explanatory video, and I wish you a nice day, a good life, good health, and sure safety, and more progress and success
my regards
Thanks Abdullah for watching and taking the time to add a comment here. I hope you find other useful videos on Next Level Carpentry Channel to help you on your journey to 'learn carpentry by watching videos'!
Best,
Matt
You’re explanations along the way before you get to far away from the particular step in the projects are really appreciated ! It really helps the mind (especially a bit older minds) absorb the many details, so I appreciate the time you spend in your videos, no need to apologize for US for hanging in there We are grateful to you for hanging in there for us !!
From details to safety, from do's and don'ts is already here... everything is in full details. No wonder it took full 2hrs and a half is because of all the explanations needed. Thumbs up.
All I can say is WOW... very few times I have seen detail carpentry like this, growing up there was a Master Carpenter who lived across the street from my Family home. Even in his 70's he was still in demand by the very wealthy wanting his tradecraft skills. I watched every bit of this and wasn't the slightest bored... it reminded me of my 7th Grade shop class, we had a very sharp shop teacher who taught us the fundamentals of not only woodworking, but the care of tools. I'm getting back into woodworking mainly to make a sewing cabinet for my wife. I do almost any repair around the house, I've done Mission and through those trips I've picked up a lot of skills... but, that is mainly rough work. Framing, Plumbing, electrical, roofing, cement work, tiling and even the care and repair of our groups Tools. I've picked up on and carefully watched all your jigs, compass work and ways of scribing. This is a project that has great teaching skills... I really appreciated it so much so... I got up at 3am to watch the whole episode!!! Each morning I watch a woodworking video with my coffee... this was a whole pot of coffee episode. Again, this was great I watched a Master at work!!! Thank You!
Well thanks for watching this whole 2 1/2 hour master class Bob... hope you're able to use things from this and other Next Level Carpentry videos to achieve next level results of your own on that sewing cabinet for your wife. FWIW the master class video I did for professional grade cabinet drawers might be particularly useful for the project: ruclips.net/video/UMy5RGblxkY/видео.html
Best,
Matt
It’s nice to see a like-minded craftsman like myself, showing others the correct way to do things as well, as being totally honest in the construction process things happen
Wow! I watched the entire video in 2 sittings and intend to watch it again. I’m 74 years old and have been working wood since I was in Jr. high shop class. I learned so much from watching you and appreciate all your tips. Since I found you I will look for your past videos. Thank you so much for your time.
Best Regards
Fred Thomas
I cannot believe how many tips/tricks/eye opening tidbits of knowledge came out of that video. Absolutely impressive
Thanks Rich... much appreciated! Best, Matt
True carpentry master at work, it’s fantastic you are documenting your work, your kids and their kids will appreciate seeing you in action!
The tape tip alone made this video extremely valuable
I agree
Have to say the planer sled and explanation of how you set it up to give the most amount of material is world changing.
It will save me so much material.
Thanks a million
I know, it's amazing right? And even though there are some things I'll never to (for example, build that template with multiple cuts and CA glue was I have a handheld shaper origin CNC), a lot of them are absolutely amazing too. This sled thing omg... So good!!
fantastic - it was like sitting down to watch a full length LOTR film... except I didn't fall asleep!
Matt, your jig making game is top notch. Gaining tons of tips for my own bag of tricks.
Thank you so much! True master craftmen!
😊😊👍
Dear Matt, Boy was that an epic movie - a Mega movie by anyone’s standards. It turned out to be a textbook of unfamiliar ideas and solutions that I have never seen before put in such an elegant way. Brilliant techniques like how to flatten warped boards on a thicknesser, how to cut strange angles on the table saw, constructing a jig using thin sheet and CA glue, making tiny and ultra thin components on a table saw {without cutting your fingers off} and finally providing a superb transparent finish to a piece of wooden furniture. Never apologise if your videos run on a bit, they are worth every second of play time. Cheers.
Thanks so much for watching this 'epic movie' and sharing an encouraging comment Peter. Much appreciated! Best, Matt
I watched it to the end! So many useful tips packed into this! Thank you for providing this! The best things I got out of it were the detailed info on our planer sled and your fixture making tips. I've seen lots of people making planer sleds but none of them as detailed as yours and with such practical guidance. Your videos are just a trove of valuable training. Thank you!
Thanks for watching and commenting Phillip! Your appreciative comment will offset others who are sure to whine about the 20 minutes +/- of video length dedicated to that planer sled section so I really appreciate it.
Best, Matt
@@NextLevelCarpentry I'd say ignore those complaints-but I haven't found them yet. Keep doing what you're doing, we love it!
@@ccreutzig full disclosure I deleted one whiner's comment but mostly to spare them the wrath of appreciative viewers who might disparage the whiny tone of said comment. 😉
Painters tape for a zero clearance insert was a great new tip I will use.
@@KCGADUDE It'll do in a pinch but I recommend the real deal if/when possible...
SNIPE STRIPS.......GENIOUS! simple elegant solution for a maddening problem!
Chapeau! Those have to be the most expensive footstools I've seen. And while I would never spend this amount of time on footstools, all the tricks in this video will come in handy in other projects. What a awesome time to be alive and have this knowledge available.
Great video! Watched it all. Love that he asked for the number to "that Bourbon Moth dude"!
Amazing job Matt! This looks great and we're so glad you enjoyed using the Halcyon 🤩🙌🏻
Hey TB... Thanks for reviewing my review!! 👍🏻😎
I hope viewers will evaluate both of us in considering Halcyon for their projects because of this. Like any new product use experience, water borne varnish takes a little getting used to so, where Halcyon is concerned, I tell people "if it's not working or you're disappointed, you're doing it wrong!" Makes me thankful for your tech support team to help get it right...
Best, Matt
I'm still here. Just love the Craftmanship.
Glad to hear it... thanks for your patience in waiting for this video to finally get uploaded! Best, Matt
I enjoyed this master class. The use of jigs to provide precision in tendon cutting was inspirational.
I would like to offer a tip that I use to prevent accidental dig in of the saw into the finished surface. I use a hotel key card which is 1/32 inch thick as a shim around the tenon. The plastic does not damage the Irwin saw teeth and the 1/32 inch stub is easily sanded smooth with an orbital sander. I have found that gas cards and some club membership cards offer the same thickness. Using them protects your identity and gives them a second life.
Demonstrating the gang cutting as a production tool as well as demonstrating the layout for templates is fantastic.
Thanks for sayin' James... hope those tips/examples are useful for you on your projects regardless of what they are. 😎
Fantastic video Matt.
You have once again set yourself apart from all others in your explanation and execution of this project.
It's a pleasure to watch you work and once again my head is full of new tricks.
Thx again
Darrell
Thanks for watching and commenting Darrell... much appreciated!
Best, Matt
まめな並んでな
@@元村俊也 このビデオを見て、それに素敵なコメントを追加していただきありがとうございます！
一番、
マット
First 5 seconds of the video and I already know that I like you, sir. Thank you.
Thank you for these extermely informative videos. As a hobbyist mostly learning from own experience and other youtube videos, you videos truely make me realise how much room there is to grow, be more efficient and detail oriented.
I never would have thought that I would spend two and a half hours watching someone build a stool, let alone recommending it to someone else, but here we are. :grin: (Seriously; the tips and tricks you pass on along the way make watching it well worth the time spent. Thank you for your service.)
You're sure welcome Keith... Thanks for watching the whole thing... It's a lot for me to ask so I really appreciate it! 😎
@@NextLevelCarpentry I had never heard of you before and the length threw me off, but I thought that I would give it a chance anyways. BOY, am I glad that I did!
@@KeithOlson Cool. Very cool, especially in RUclips world where 20 minutes is the norm! 👍👍
I can barely sit through a 2 1/2 movie, but watching every minute of this tutorial was a piece of cake! I learned and enjoyed that so much, thank you Matt! The only flaw with your work is that now those step stools are almost too beautiful to use.
That's quite a compliment thank you. I confess that actually using these footstools on the job is kind of like taking the first road trip in a new car and makes me a bit anxious... until after the first scratch and then I can calm down😅😎
4:12am. Not sick! Love your vocabulary and comments.
Lost my wife in Aug.
Appreciate your details.
Ken W. 😊
Thanks
Thank you Matt for sharing your “next level” techniques. After searching for plans for a shop footstool, I ran across your site and your design was pleasing to the eye and would allow for mortise and tenon experience.
Deciding to follow your lead, four footstools to be gifted to son, son-in-law and nephew, along with a keeper seemed like the right number to make. After completing the first one, and fabricating most components for the others, words alone cannot express the sincere appreciation for the lessons in patience, accuracy and perseverance the video projects. Your video plan is thorough, professional and easy to navigate. For me, the 2 1/2 hour overview was just the beginning, as I spent countless reviews of the detailed individual steps throughout this project. Your work to index these steps is amazing….thank you again! In my retirement now, it is extremely rewarding to learn new and useful craftsmanship techniques. You are sincerely appreciated!
That's fantastic news William... if there were more appreciative viewers like you in the world I wouldn't open the video with a snipe at HGTV type content because you, sir, are my target audience: someone who's watching to learn and do, not those who watch expecting to be taught and entertained.
Feel free to post a link to your stool/stools when complete if you want to showcase your legacy project(s).
Thanks for watching... and rewatching... and sharing your grateful comment!
Best, Matt
Walet 🌹🌹 www lagu 👍🏿i LG lpoooooooo
O
O
Loo
Oooooool
O
L
O
O
Looo
Oo
O
Ooo
O
Ooopio
👍🏿😄😄😄😄😄😄😄😄😄😄👍🏿😄😄😄😄👍🏿
Llll
Honestly, I watch all the carpentry shows, and you are my favorite. Not only are you the most thorough, but its also very clear to me that you spend alot of time in preparation (including the narration). Most of all, you are a very humble, very genuine dude. Keep up the good work!
Also, After 6 years of learning carpentry hands-on watching You-Tube, I just opened my own shop 2 weeks ago. Thanks to guys like you!
Thanks Miguel. Here's to great success as you build your new business! FWIW I was a bit anxious at the start but enthusiasm for possibilities and potential provided motivation to press on with zero regrets over the 25 years on my personal self-employed journey.
Great Jon Matt and yes I’m one of the 3 nerds that watched the entire thing till the end of the end, picked up lots of super tricks along the way, thanks !!!
I am one, too.
Make it yet - one more nerd. Start to finish - twice. My wife thinks I am a nut. Who knows - maybe she's right. I picked up all kinds of good stuff in this lesson.
Finally made it to the end in two separate 1.15 minutes and 31 sec.. and im proud i watch all, tnks matt for a you info and knowledge
Kudos for completing your quest Gilberto... way to go! You're sure welcome for it...
Best, Matt
incredibly precise and detailed work. Also a huge effort making this video. Tons of good nuggets in here for all levels. Thank you!
I appreciate how frequently you clearly say the manufacturer and identity of tools and products you use. Thank you.
You're welcome Gene... I suspect other Channels avoid the practice if they're not getting directly compensated by the manufacturer. That's better business practice for sure but appreciative viewers like you are more important to me so thank you for that!
Best, Matt
Matt...thank your for this video. It's been a long time coming. Glad you finally got to it. And as always, it exceeds any expectations I had.
Thanks for sayin! Would you believe it took around 475 individual video clips to make this video?! Me neither... and that's not counting at least that many more that landed on the cutting room floor!
Best,
Matt
You are proving time and time again, "Fixturing is an art form" (so very cool)
Once you get your mind into a templating or 'fixturing' mindset, it opens amazing potential for the types of projects you can tackle successfully IMHO. 😎
I’ve always been interested in carpentry.
I probably wouldn’t do it for a living, but nevertheless it’s always fascinating watching your videos. I’ve learned a lot, thanks!
QUALITY CRAFTSMANSHIP‼️ DETAILS DETAILS‼️ LEARNED ALOT, Thank You, Vinny 🇺🇸
For sure, Vinny!
Amazing project! Lots of things to learn from, thanks!
Fabulous video. My husband was dabbling in woodworking. He would have loved this.
Thank you so much for this masterclass of a video Matt. I was one of the 3 nerds who excitedly watched this whole video all the way through. I learned so many new things I can’t wait to put into practice. Your thought process of how you use jigs was really eye opening for me in terms of how to create jigs for various projects. I’m an aspiring woodworker still building up my tools in my tiny garage workshop, and it’s content like this that is giving me the confidence to trek on forward.
You're quite welcome Joshua... glad to provide info to help you along on your 'journey' to your own next level!
Best, Matt
“Snipe strips”, new word for sure. Love your videos
Don't let "Matt the Nail-Bender" fool you... This is not just some footstool, but an advanced class in wood joinery and mind-boggling methodology. That stress-relief hole and chip-reliefs at each upright might seem like insignificant details; but it is these types of considerations which shows Matt's maturity in understanding the structural properties of his material. There are jigs for everything, in order to guarantee consistency. We all know that techniques can be taught, but this level insight is purely a gift from God.
Your comment just made my day... thank you for it! Best, Matt
taping that piece to the saw to maintain stability was the moment i needed to let you know that this is an AMAZING video and thank you for sharing it with RUclips! I am so excited that i still have over 1.5 hours of video left to watch
Your skills are amazing sir! Where can I attend one of your classes? Thank you for breaking down each step. WOW...OUTSTANDING 👍👍👍
If you made it through all 2 1/2 hours of THIS video, you've not only attended one of my classes, you passed with honors! 😎
@@NextLevelCarpentry I can totally imagine that an apprentice/jouneyman transition would be this stool as a project. There are SO many skills in it. If you can make a good one, ✔️. For machinists they make a 123 block by HAND (no machines other than a file and a mic)😂
😊😊😊😊
Thanks , 2.5 hrs spent watching the videos gained me prices knowledge from you. happy new year!
I learned a few tips, but , you made a three thousand dollar work shop stool. A stool made out of scraps and eyeballed dimensions might be a better time /money investment.
Depends on how you roll: if it's all about time/money invested you can always stand on the bottom of an overturned plastic bucket and spend the money you saved on a marketing campaign to try and convince people you've got the skillset to build a stool like this. FWIW I've never spent a dime on advertising my business because a reputation built on client reaction to seeing a guy show up with a piece of furniture as his work stool means I turn down far more profitable projects than I have time to take on.
Interesting point, but he is not an unplugged hand wood working channel either, but a wood project, processing wood with power tools with minimal hand wood working to achieve a product, with a high degree of accuracy and certainty when it comes time to assemble them. Only variable is the stool lengths!
Your on the wrong channel for that type of wood working here! Just a diifent style of wood working going here! But we get your point! 😂
@@makenchips LOL, I have been building a cabin on a boat as my latest project. My stool ? A plastic bucket.
Yep, sorry, you're on the wrong channel for that. Maybe try searching "making a stool while not giving a crap" You'll probably find what you're looking for there.
@@pumpkinheadghoul LOL!!🤣🤣 I couldn't agree more!
Your outfit is inspirational and no festool required for this footstool 👍
"No Festool for this footstool" is a great mantra... thank you!!
Blah blah blah
Thanks for sharing insight into your level of intelligence and quality of life for 2.2 MILLION other viewers who watched this video and expanded their knowledge and skillset...
@@NextLevelCarpentry try watching a real master carpenter ISHITANI that doesn’t talk so much sh!t
It is next level master blah blah. Title post to be "How to cut & assemble 3 peace of wood".
@@Mike61259 The opinion of a true savant... who doesn't even know how to spell "piece" correctly in context. Priceless!
@@Mike61259Okay if its so much blah blah blah then please replicate it i would be actually glad to be teached better 😊
Well, I stayed until the very end. It is almost 3.00a.m. in the Malaysia. And today is 31 Dec 2024. I loved every minute of it! I learnt a great deal. Thank you ever so much. And a Happy New Year to you. GK
Less than 5 minutes in and I have to pause to give this a like. I really appreciate that you explain the "why" part before you do the "how" part.
I wasn't able to watch it in one sitting......but watch it to the end I did...AWESOME JOB!👏
Kudos! It's a lot to digest... hopefully the chapter list was helpful to align 'sittings'?
Witnessing the worthwhile work of those wee wanky wedges was wonderful. I will welcomely wind up watching your videos whenever I want a wealth of woodworking wisdom.
Wow... what a wonderful way of working with a wealth of words! 😉🤣
Sending encouragements... still watching. Leaning something new each time. NLC is da bomb.
'If you're expecting to see someone who's more concerned about how their outfit's put together than the project they're working on..."
You, sir, have my attention. I don't know how I ended up here in my sleep, but I actually *do* need a carpenter's / woodworker's footstool.
Let'sgggoooooooo!
Always welcome comments from those who 'get it' regarding fashion vs craftsmanship... welcome to Next Level Carpentry! Have fun with your footstool build... it's a worthy project that should serve you well for decades IMHO.
I built something like this with all 1 X 12 and 1 X 4 skirts beneath the step in addition to what you have. Mine with all 90 degree angles was clearly an apprentice piece. The bad news, it was stolen with my truck in 1999, I still wait to find someone standing on MY stool!!! Bless you for showing the addition of the angles, and tenoning, which make your project very worthy.
I enjoy watching your videos and learning your techniques brother, don’t pay attention to the negative comments..
Thank you for this detailed video. Not an issue for its length. It was a complete project!
Thanks, Jon Matt, super easy to follow, excellent teaching techniques. Another nerd still watching and learning. Cheers
This just happened to me today. I drew from the 'luck bag' and it missed me, but I will NEVER forget this wise advice!
Thanks again, Matt:
Jeff in Mid West Michigan.
Glad to hear you lived to work another day... luck/experience events like that tend to stick with you for a lifetime! FWIW I've got history in and around Saginaw... fond memories from a beautiful part of the country...
Best,
Matt
Love the planer board and showing all the batch cutting techniques, definitely saves time and its more accurate! Spraying since the 70s heck I thought you were only 35! Lol
Flattery will get you nowhere Brian... but I'll thank you for it all the same😁😎
Believe it or not, I started bodywork and spraying while a junior in high school circa 1972... can't even believe it's true myself. My how things have changed!
I was a little concerned with how batch cutting, because I was making a whole batch of stools, would play for viewers who might only make one so thanks for mentioning it.
Best, Matt
Ha! "Hold your tongue right." My dad used to say that. He gave me my first instruction in wood working sixty years ago. I miss him very much. Thanks Matt.
You're welcome David. Wish I knew where the previous generation came up with such fun/great sayings for us, don't you? You dad sounds like the kind who are missed most... glad you have fond memories to help you cope. Best, Matt
Great video. I’m watching while cooking dinner, but I’m going to watch this again and make one of these beautiful stools.
Hope you enjoy building a footstool more than I'd enjoy cooking dinner!😉😂
Thank you for adding Super Thanks too... much appreciated!
This teacher is the consummate professional. A true master.
Thanks Nat... I'll try to live up to your compliment😉 I really do appreciate it!
Best,
Matt
Seriously Matt, a 2.5 HR video to make a stool? I LOVED IT. When it was done I sighed, "that's it"! RUclips may not like your epic vids, but your rubbers sure do! Please keep making' 'em, and we'll keep watching' 'em. Great stools btw.
A guy like you might believe how hard it was to trim it down to 'just' 2 1/2 hours! FWIW the digital project folder has just under 500 individual video clips in it... and those are just the final takes! I probably deleted more outtakes than I kept so I'm glad to know even after all that you'll keep watchin' em!
Best, Matt
True master piece. If I could only do one project in 2022, this would be it. You are the best carpenter/woodworking teacher on RUclips.
Thank you, thank you! Comments like yours sustain me as I grind through the drudgery of video production which is much appreciated! Best, Matt
Nicely done video. It was very well explained, with a clear close ups. Thank You very much. Enjoyed all 2 1/2 hours.
I'll remember this zero clearance tip in the future. Good Job, Matt Jackson, Master Carpenter.
( I love when my GF rolls her eyes, when referring to you in your 'full title'.)
I've taken to referring to other channels in this way, and trust me, they ain't all nearly so 'gracious'.
You are awesome!! Some of us still appreciate real teaching and real learning! Much appreciated!!! God Bless
Yea it's a little long but great work and good tips can't get in shop because fighting cancer I'm just as happy watching your videos
What a knowledgeable and patient man.......something I'm not !!!............outstanding !!
PHEW ! Just Kidding! I stayed with Ya till the end!
Kudos on completing the marathon Albert! Thx for watching... ALL of it! Best, Matt
if you are just beginning to dip your toes into carpentry, this is a good place to start. hell its even useful to the experienced carpenter.
Matt your explanation and visual demonstration is what a visual student/learner needs such as myself. You have shortened my learning curve by several years. The creation of your gigs have opened up my mind on how to better set up a project let alone a repetition of cuts. Please continue your videos. I have learned so much. Thank You.
I'm honored to be part of your journey to your own next level David... there's really no short-cut but you can certainly travel more efficiently with focus and determination 😎
Best, Matt
CAPVIDEO1
The way you teach how to think and do, is invaluable on its own. But the lessons and amount of information you provide when something doesn’t go right, is just gold! That’s the stuff that separates a master carpenter from just a hood carpenter. Thank you for including ALL the details of your work process. I can’t get over how quickly you can think through and create jigs. I can’t wait until they become second nature to me too!
Thank you!! 👍
Start with 'low hanging fruit' for jigs and they WILL become second nature, Henry😉😎 BTW not sure if you noticed but 'we' got 10 others to request a video showing how to make pyramid caps, instigated by your comment on the Perfect Long Holes video... working on producing that video already with hopes of publishing in the week ahead...
Best, Matt
@@NextLevelCarpentry Thank you - looking forward to it! You’re an awesome teacher! 👍
Believe it or not! I spent 2 hours, 31 minutes watching this video. I even do not spend that much in a move. Congratulations. It is another level indeed of carpentry. I Also have just found someone more detailed than me. With that I can start thinking that being detail-oriented is not a disease, as everyone treats me. But I don't talk as much as you do. Whereas my world is rather silent. I suppose it's for recording, but I never saw you drinking a drop of water. Besides your talent, you have a great throat. Your work is truly brilliant. Thank you so very much.👏🏼👏🏼👏🏼👏🏼
Oh! another 4 minutes writing.
Thanks for such an enjoyable comment Edinho... "I do not spend that much in a move" made me laugh! Thanks for watching and commenting on this one. FWIW I actually drink a LOT of water but, since it took over 2 months to shoot and produce this video there were plenty of off-camera moments for that. 😎
I too watched to the end...the tips, jigs, and attention to detail are always worth the time Matt.
Thanks for lettin' me know Bob... much appreciated. Really. There's times long videos with few views can actually be depressing but as long as viewers like you find value here at NLC I'll keep crankin' em' out! Best, Matt
Such a seemingly simple project, but hiding such a wealth of beautiful and complicated joinery. All of this explained in such a way as to make it understandable to us mere mortals. Loved the use of the jigs to easily make the joints etc. A master class taken to the "Next Level" thanks Matt.
Thx for watching and commenting on this one Ray... it's viewers like you who are my only hope of success producing such long videos for a RUclips Audience which I really appreciate!
A Master Craftsman at work! Semper Fi
Thank you! And greetings from Germany.
Guten Tag ... danke fürs Zuschauen! 😎
I watched every minute. I won't be able to help you down. I see you made it anyway. I really liked watching. Thanks.
For watching to the end of the end of the end, I thank you!
Yoda
@@NextLevelCarpentry very interesting project.
Welcome to NLC’s Fabrication, fit & final finishing of fancy footstools with wacky wee wenge wedge woodworking…
well done !
If I didn't know better I would say that sounds like a job application for script writing at Next Level carpentry🤣😎
Thank you ! I’m pretty positive I used up my annual alliteration allotment after all that 🍺
@@bagadonutz5717 an absolutely amazing accomplishment...
I’m a young guy that just discovered my love of woodworking. Your long form video has been immeasurable to teach the trade of your craft. Thank you for your hard work in making these videos and for passing these skills on to the next generation.
Always glad to 'meet' a next-gen woodworker... welcome to the world of woodworking at Next Level Carpentry. Hope you have time to check out other videos here, most of which are considered 'long format'. I have enthusiastic new craftsmen like you in mind in every video I produce...
Best, Matt
I built a splayed leg stool with my grandfather 55 years ago. It's still supporting my ever increasing weight ;-) Love the "wee wenge wood wedges without wobble" !!
What a fantastic memory and legacy... thanks for sharing Rick! Best, Matt
I learned a lot watching this (30 years working wood). Particularly, your layout/router jig making strategy is genius!
Thanks for sayin... incorporating simple templates for flush trimming complex shapes is a real game changer for woodworking IMHO. Hope the concept helps you to your own next level. FWIW this video takes the template concept to a whole 'nuther level if you're interested: ruclips.net/video/8ZfsRTWGwl8/видео.html
I;m a wannabe in this, haven't even setup a proper workshop and just watch videos from time to time to learn techniques that I could try/apply as I am creating smtn myself. This video started from autoplay and was selected by the almighty algoritm after a video of Project Farm. I barely watched, but listened through the video through the very end.
DUDE, u are so good and detailed in this, but that was too much for me and I kinda got bored by all the small touches you are doing. I dig the putty knife approach, creating a jig for everything that can be 'jigged', templates, etc.
However, the best part of the video was ur way of advertising the channel and and encouraging ppl to support it. And its nice that ur not demonizing the algoritm that demonetizes ur vids, but explaining the situation as it is. Love ur honesty and the way you bring tthis to the audience.... ppl on other channels are "algoritm is hell, plz pateron money cuz if i rely on youtube I aint gonna be able to afford a new $150 shirt for the next vid" and thats.... welll I dislike as they do selfadvertising. And urs was so good that If I had the patience to go back through the video to find where it was, I would rewatch that part. HEHE.
U got a new sub, but I wont give u cash on patreon, sorry - I got no Patreon and no excess of money to donate to AMAZING content creators like u.
KEEP UP THE GOOD WOODWORK AND PLZ DONT OVERDO IT SO MUCH IT WILL NEVER BE PERFECT...think u missed a glue leftover on one of those stools btw. :D
Beautiful craftsmanship, I really appreciate your high degree of detailed information and skill. You are a wonderful teacher and example of pride in excellence. Thank You
You can now add one more to the list of viewers who made it to the end, and a new subscriber as well, after running across another of your videos today. The level of detail is outstanding and very much appreciated. I think I learned more in this single video than I have in watching videos over the course of a week from many of the content providers I’ve seen. Thank you!
Welcome to Next Level Carpentry! Congrats for making it to the end of the end... and thanks for the sub!
Best, Matt
When I saw how long this video was, I wondered what or who would watch one this long.. But once I saw the wenge wedges fit into the wenge wedges slots, I wondered no more. Watching this while wanting to see more I wondered who was also watching and who would want to watch even more. Once finished, the whole world should watch this winning video. I wondered if I was willing to wade thru other videos to learn about wedges, but watching this, that thought went out of my mind. No wonder I was willing to watch the whole thing... well done my fellow wood worker....
Whaaatt?... your work with words is... well; WOW! Thx to a fellow wood working wordsmith... way to go!
Best, Matt
... finally someone that EXPLAINS the project and not just shows how good he is in executing the cuts and assembly and shows the final project (without even any measurement). Happy Christmas Holidayds!!!
Matt, after that kickback I had to stop and thank you for that great idea, blue tape over the plate. Genius! It will definitely save me one day. Thanks.
I learn a lot of knowledge from this video. Thank you for teaching all of us.
Thank you for helping us fill our exp bag at the expense of your luck bag
Embarrassing as it is to admit I didn't forsee that little incident, you're welcome. It's my way to return the favor to those who's mishaps helped me avoid other mistakes thereby filling MY bag of experience...
Best, Matt
Oh man, I've watched an hour and 43 minutes so far, but I really need to go to sleep now, very nice video Sir!!!