you're supposed to use the included black round separator tool. the person in the video is an idiot. that said, i am too bc the instructions don't mention it either, and i threw mine away not knowing what it was. i was able to finally get it out after pulling with the power of 1000 suns but i bent the original clip in the process. poor design.
@@reanimationxp where is the round separator? Mine is not in the box. I just use a spudger to pry it off. The way this guy in the video does it for me is impossible. It will not come out by pulling.
If anyone is actually trying to do this...Don't follow what they're doing. Take a plastic spudger and put it between the nose bridge and the glasses and push between the gap slowly while pressing against the bridge. It will pop out.
Ok, so if anyone is whondering how to do this... put your middle finger in between and put your other fingers on the outside and just pull straight out. Make sure that you are holding onto the middle of the frame (Not the silcone pads). There isn't anything else you need for it. Edit, it requires a lot of force, it will feel like it will break but don't worry, it won't.
Nvm, I did it. You need to pull them hard down. I'm surprised that you need to put so much force into it. Btw, your middle fingers are really so tiny? xD
What wound up working for me was doing as the video shows to get it a little loose, then using the black square pick they give you to insert in that gap and then prying it out (push up on the pick to push the nosebit downwards). Popped out.
If you don’t have a special tool the easiest way to take it of is to put another nose pad between installed one bridge and glasses bridge and push it forward and down. Very easy
Next time, ship without this attached. Allow us to add them if we want. Not a great first impression to fight with a nose bridge for one hour when you wanna just try out your new $500 AR glasses
I've tried this like 100 times - it doesn't work.
feels like i'm gonna break it
you're supposed to use the included black round separator tool. the person in the video is an idiot.
that said, i am too bc the instructions don't mention it either, and i threw mine away not knowing what it was. i was able to finally get it out after pulling with the power of 1000 suns but i bent the original clip in the process. poor design.
@@reanimationxp where is the round separator? Mine is not in the box. I just use a spudger to pry it off. The way this guy in the video does it for me is impossible. It will not come out by pulling.
@@OkiDingo I think it was in the glasses case, I forget. I assumed it was packing trash and tossed it.
@@reanimationxp I still have all the packing stuff, I’ll have to check after work
If anyone is actually trying to do this...Don't follow what they're doing. Take a plastic spudger and put it between the nose bridge and the glasses and push between the gap slowly while pressing against the bridge. It will pop out.
Ok, so if anyone is whondering how to do this... put your middle finger in between and put your other fingers on the outside and just pull straight out. Make sure that you are holding onto the middle of the frame (Not the silcone pads). There isn't anything else you need for it.
Edit, it requires a lot of force, it will feel like it will break but don't worry, it won't.
thanks, i couldn't figure out how to do it even after watching this vid
Pull straight out in what direction? Down, back? I tried in different ways and none is working to me,,,
Nvm, I did it. You need to pull them hard down. I'm surprised that you need to put so much force into it. Btw, your middle fingers are really so tiny? xD
This helped me out: ruclips.net/user/shorts_UGPgF9X3D0
@@doubting_truth This. I'm surprised at the force too especially given how fragile it looks
What wound up working for me was doing as the video shows to get it a little loose, then using the black square pick they give you to insert in that gap and then prying it out (push up on the pick to push the nosebit downwards). Popped out.
Mine might as well have been superglued in. No shifting them without them snapping.
tbh its actually better without the nose pads at all :) anyone else agree?
I got it to work by wedging a real sturdy guitar pick in between the plastic and metal part
This is practically impossible but I ended up using a plastic bottle cap to wedge in between the frame and the nose piece to pry it out
way better without nose clip
If you don’t have a special tool the easiest way to take it of is to put another nose pad between installed one bridge and glasses bridge and push it forward and down. Very easy
This one 💯💯💯
Agree very hard to remove the first time for fear of breaking
I've had my glasses for 1 year and the hinge has broken through every day normal use , absolutely gutted :(
How do I adjust the nose pads? It's just too uncomfortable
Next time, ship without this attached. Allow us to add them if we want. Not a great first impression to fight with a nose bridge for one hour when you wanna just try out your new $500 AR glasses
Why isn't this working like in the video?
wow can't believe I watched a youtube video for something THAT simple... Worst part being that it didn't help'at all.
Ah the ol' "Got your nose!" technique.
Did you ever get it off
@@blackpanthertchallalem8522 Yep. Just like in the video.
The perception lenses are completely useless. I try them
For me too. I can’t see anything
Rofl, these are not perception lenses, they are dummy prescription lenses. You need to order your own prescription lenses separately 😂.
Thank god those nose clips are horrible killed my nose
Just updating this is impossible
It's not, I just did it, grab from the metal frame, not the nose pads.
That's a lie. I don't get attached is different
Hi, did you get a different lens frame and nosepad?