amazing work but if that was my guitar i would’ve put some Seymour Duncan pickups and locking tuners on it then it would be a gig worthy instrument 🎸🤘🏼in my opinion
It would be very nice if you expained what you are doing. You see, this type of content is for people who will watch and maybe try it themselves. So, it is great to know things like what paint you are using, how many coats of finish, which scraper to use, if you are sending then what grit of sendpaper and so on.
The string height of this guitar on 12F is 1.8mm for the 6th string and 1.3mm for the 1st string. The height of the pickup is about 3mm on the 6th string side and 2.5mm on the 1st string side when pressing the last fret.
This is not peeling off, but adding to the area to improve the adhesion of the next clear coat. Rather than spraying the clear coat all at once, I spread it over two days to create a thick layer.
With such an effort to mod a guitar, he should have put in a new set of pickups, for that final testing, this guitar doesn’t sound good at all. If any guitar that was relatively old and have not been played for a long time, chances are the pickups have deteriorated.
Very nice mod on this old Burny guitar! The airbrushed ghost flame finish is what really makes it stand out from the old finish! Well done sir!
Love the paint work! I'm a little disappointed you didn't put better caps in, and you didn't scrape the fretboard and really make it look like new.
格好良い。塗装だけじゃここまで良くはなってないだろうな…カットも含めたデザインができるのが素晴らしいです。機会があれば自分も依頼したい。
本当にありがたいお言葉励みになります！
自分は実は木工の方が得意です！
機会があれば是非よろしくお願いします！
Unbeleavable Great Job This Guitar Looks Amazing
Thank you very much!
Your comment is encouraging.
Thank you for your continued support.
Великолепная работа 👍
ありがとうございます！
とても嬉しいです。
これからも応援おねがいします。
ええええええ！欲しい！検討します！それ以上に自分のギターこの塗装にしてほしいくらいです！素敵！
本当に嬉しいコメント嬉しいです！
是非ご検討ください！
チャンネル登録＆インスタフォローもよかったらお願いします！
Just beautiful work!!!!! Thanks for sharing!!!
Thank you very much!
Thank you for your continued support.
すごい匠の技ですね
恐れ多いです…
でもとても嬉しいです！
本当に励みになります。
これからもご視聴よろしくお願います！
Excelente trabalho!
Muito bom gosto tanto na pintura, como na modificação do corpo, profissional de alto nível.
👏👏👏👏👏👏
Thank you very much.
Thank you for your continued support.
カッコいい、、
機会あれば自分もしたい！
コメントありがとうございます！
嬉しいです！
是非機会がございましたらよろしくお願いします！
Beautiful and unique work man
Thank you very much!
Thank you for your continued support.
that is amazing and very tasteful ....great job
Thank you very much!
Thank you for your continued support.
thats an amazing paint job.
Thank you very much!
love the paint job!!
Thank you for your comment.
I also love painting!
¡Hermoso trabajo, felicidades!!!🤘
Thank you very much.
Thank you for your continued support.
Ang galing ng pagka tira
ボディシェイプ変更するのはかっこよくなるなぁ
ちょうど近所のセカストに全く同じ物があるんだよなぁ
アッセン一式をグレードアップすればかなり使えそう
コメントありがとうございます！
やり方によっては全然カッコよく出来ると思います！
このモデルのボディ材はバスウッドなので軽量で取り回しもかなりよく、おっしゃるようにPU等を変えればかなり使えると思います！！
Amazing work 👏
Thank you very much!
Thank you for your continued support.
That was amazing!
Thank you very much!
Thank you for your continued support.
Awesome work 👏👏👌
Thank you very much!
Thank you for your continued support.
Wow!! beautiful!!! what kind of Paint are the Pink and Blue?. Thank you for share!
Thank you for your comment.
It's imagining a flame.
Thank you for your continued support.
かっこいい…
コメントありがとうございます！
これからも見ていただけると嬉しいです！
I like your guitar cradle 👍👍
Thank you！！
Excellent work!! 😎🙏
Thank you very much!
Thank you for your continued support.
Great work.
Thank you very much!
Thank you for your continued support.
Super travail !!!
merci de ce partage 😊
Thank you very much!
Thank you for your continued support.
めっちゃ すごい！
コメントありがとうございます！
そう言っていただいて本当に嬉しいです！
これからも応援していただけると嬉しいです！
Better than the Final Fantasy Strat that Fender tried to sell us...
Thank you very much!
I also really like the combination of blue and purple.
Thank you for your continued support.
amazing work but if that was my guitar i would’ve put some Seymour Duncan pickups and locking tuners on it then it would be a gig worthy instrument 🎸🤘🏼in my opinion
A little carving and paint, and it goes from POS to PHAT.
Thank you for your comment.
Thank you for your continued support.
Like nr. 900 👍 what a beautiful guitar
Thank you very much.
Thank you for your continued support.
メルカリで見かけるようになりましたね
I got a "Cort Z44" that looks a lot like the one you are working on there
Thank you for your comment.
That's nice!
It would be very nice if you expained what you are doing. You see, this type of content is for people who will watch and maybe try it themselves. So, it is great to know things like what paint you are using, how many coats of finish, which scraper to use, if you are sending then what grit of sendpaper and so on.
Thank you for your comment.
I'm not going to explain it for now.
😂😂😂😂@@FUGAGUITARS
👏🏼👏🏼👏🏼👏🏼
amazing
Thank you very much!
Thank you for your continued support.
かっこいいー
エレアコとかでも大丈夫ですか？
ありがとうございます！
カットをいれたりとかは当然出来ませんが、ファイヤーパターンを描くのはもちろん出来ますよ！
@@FUGAGUITARS ありがとうございます。検討してみます。
Awesome
Thank you very much!
Thank you for your continued support.
What measurements do you use for string height at the 12th fret and the pickup?
The string height of this guitar on 12F is 1.8mm for the 6th string and 1.3mm for the 1st string.
The height of the pickup is about 3mm on the 6th string side and 2.5mm on the 1st string side when pressing the last fret.
@@FUGAGUITARS thank you. Great build!
@17:00 what was that for? I understand that you already put clear coating why remove it and do it again?
This is not peeling off, but adding to the area to improve the adhesion of the next clear coat.
Rather than spraying the clear coat all at once, I spread it over two days to create a thick layer.
これと同じにしてもらえるんですか？自分モッキンバードなんですけど
コメントありがとうございます！
可能ではあるのですが、今はまだ完全に独立しておらず今現状は趣味の延長でやっているので、お仕事としていただくのは少し選ばせていただいている状況です。
もし本当にご興味があるようでしたら、インスタのDM等でお問い合わせお願いします。
With such an effort to mod a guitar, he should have put in a new set of pickups, for that final testing, this guitar doesn’t sound good at all. If any guitar that was relatively old and have not been played for a long time, chances are the pickups have deteriorated.
Thank you for your comment.
I will refer to it.
how would you even assess how good the sound of the pickups are when they literally recorded the audio with the camera mic?