How to build a simple garden fence

Поделиться
HTML-код
  • Опубликовано: 20 дек 2024

Комментарии • 383

  • @michaelbronco
    @michaelbronco  12 лет назад +4

    That's the beauty of it, Tom. VERY simple and cost me less than 400 bucks. I've been getting lots of photos from folks all over the world who gave it a go and did a fantastic job with it. Only takes very basic skills. You should see one that was built be a mother of 4! Totally awesome.

  • @surfearth1
    @surfearth1 5 лет назад +7

    Just watched 15 videos on making garden fencing. Your process is the best I’ve found. I made the boxes today tomorrow will be the fence. Thanks for posting!

  • @c.serrano2974
    @c.serrano2974 11 лет назад +1

    That was a very nice fence and you were very well spoken when explaining the steps, that makes it so much easier for me to understand and perhaps today I'll check if I have enough wood in my backyard to create such a great project, THANKS!

  • @espo1848
    @espo1848 11 лет назад

    Wow This is the most professional fense I see on your tube. I wish I have one like that.

  • @DJBobalu
    @DJBobalu 7 лет назад +2

    One of the best videos I've seen on building a simple but effective garden fence. I'm presently using this method to construct a 5' fence around my own garden (30 x 25 foot rectangular area), which seems to be the favorite grazing area for several deer in our area. My yard has a slight slope (about 8 inches over a 30 foot run), so I've modified this concept slightly. Rather than step each section down to accommodate the slope, I built the frame sections 4-1/2 feet tall versus the full 5 feet tall, with the extra fence wire protruding below the bottom of each frame. I then dig a shallow trench between the 4x4 posts and bury the protruding wire. This keeps the fence sections horizontally level the length of each run, plus eliminates any gap below the bottom frame member due to the slope.

  • @capone3167
    @capone3167 4 года назад +3

    Awesome video!!! Here I am 10 years after it was made and it still works just a great!! Thanks

  • @dukealliefifi
    @dukealliefifi 8 лет назад +2

    It took me a minute to figure out how you got the sides to stay together but what a fantastic way to do this. Great job

  • @m6741r
    @m6741r 12 лет назад +1

    Great video. I used this idea to make doors for the hoop house I built for my ducks. The doors turned out great. I used 1x4 for the frame and 1/4" hardware cloth for the "screen". My wife loves how it looks and even my neighbors came over and complimented the doors.
    On a side note, I'm currently reading Man School on the kindle and I wanted to let you know it's wonderful. I can hear my grandfather when I read it. Thank You

  • @cosmicmuffin420
    @cosmicmuffin420 9 лет назад +20

    best vid on framing up panels for fencing I've seen. And, I've been searching. About to build my first fence for 2 dogs. Thank you! I feel confident I can do it now.

  • @HyprDreamer
    @HyprDreamer 6 лет назад +1

    This is what my mother wants us to build for our future vegetable garden. I was thinking of just using cattle fencing that we have lying around that we used to close off apart of our back yard, and then lining it with chicken wire or that same metal paneling you’re using. Also looked at the garden fence video and I think it helped me solve the problem about a gate. Great video thanks. Will share with my mother.

  • @chrismoodytile9805
    @chrismoodytile9805 Год назад

    Outstanding video, when it clicked what you were doing with the boards, I understand and I’m going to do this at my house. And level too? Nice work a true craftsman.

  • @shanebutler6188
    @shanebutler6188 4 года назад

    Hi Michael, I followed your plan exactly and it worked brilliantly. Many thanks pal.

  • @messenjah71
    @messenjah71 11 лет назад +1

    I recently finished building my fence following your design. My friends and family love it. Thanks for sharing this.

  • @jayvondra2941
    @jayvondra2941 11 лет назад

    I'm glad I came across your Channel.. Thanks for what you do.. I'm chasing good money after bad with 1/2 A** Projects and Thank you for showing us the right way to do it the first time....

  • @flowerlady22
    @flowerlady22 4 года назад +1

    Thanks for this system you designed. Your instructions for each step are clear. I have learned the meaning of plumb and square by watching your explanation. We are preparing the structure in the autumn and hope to have it ready by next spring!

  • @EternalMoonFire
    @EternalMoonFire 2 года назад +1

    We are making this fence right now. It’s going exceptionally well!!!! Thank you!

    • @michaelbronco
      @michaelbronco  2 года назад +1

      That’s fantastic! Glad it’s helping you out.

  • @ahmadanbar8814
    @ahmadanbar8814 9 лет назад +1

    Great video, it was easy to understand. We have just put this fence around our raised vegetable beds to keep the chickens out and it looks great - thanks!

  • @coinfishmedia
    @coinfishmedia Год назад +2

    This is great. I was looking for an alternative to a hog wire fence with dado grooves and this looks just as good and easier. Thanks!

  • @RadioactiveMoose
    @RadioactiveMoose 13 лет назад

    Never mind, saw your video with the gate! You're a life-saver sir.

  • @iel2006
    @iel2006 12 лет назад

    Thanks for the video. You have given me a great idea for my garden. Much thanks from San Diego, California

  • @Damali0812
    @Damali0812 12 лет назад

    What a great way for a fence! I did a cheapy one this year and the only thing it didnt keep out was my husbands small dog. It took him all spring/summer to get in but i think i will do it your way this upcoming year. TYSMFS!

  • @matthewrusso1350
    @matthewrusso1350 9 лет назад +4

    Thank you for creating this video! I was looking for fence ideas and this one was not only easy to build but looks great. Thank you so much, Matt from Massachusetts

  • @BatesFamily
    @BatesFamily 9 лет назад +24

    We used this tutorial recently to enclose a raised bed garden in our backyard. We also made the following modifications....
    1.) We didn't need a very high fence so we bought 4' welded wire fencing and framed with with a 3' tall opening. The extra almost 12" we let extend from the bottom of the frame. After installing the fence panel we then trenched directly below the panel and inserted the extra fencing. This reassured us that nothing would tunnel underneath our fence. It also allowed us to not have the bottom of the fence panels touching the ground - which should make them last longer.
    2.) We used rounded staples to secure the welded wire fencing to the boards to ensure the wire stays tights for years to come. We also used a black vinyl coated welded wire for esthetics and to avoid rust issues.
    2.) We also added a 'chicken run' attached to the inside of the fence's perimeter. This gives us a secure area for chickens to inhabit and they also eat invasive bugs and grasses/weeds that would otherwise invade the garden.
    3.) We also added a horizontal board to the top of each fence panel - for esthetics and to keep water from getting between the boards and rusting out our staples we used to keep the welded wire fence tight to the panels.
    Very happy with the results and we've been getting lots of complements. Thanks for the tutorial.

    • @SPowers
      @SPowers 8 лет назад +5

      Can you share a photo. I was thinking the same concept with 3' and the last 12" in trenches. How did you build your door?

    • @ceya733
      @ceya733 Год назад

      ​@@SPowerswas about2reply the same thing😊..Pic plz

    • @kelliebuchanan4045
      @kelliebuchanan4045 Год назад

      Likewise! I have chickens and this sounds like a perfect setup. Thank you!

  • @readynet4983
    @readynet4983 8 лет назад

    man that's a great looking job. You have added value to your home!

  • @Modernstoic1
    @Modernstoic1 2 года назад

    You rank first for simple garden fence! This is important information

    • @michaelbronco
      @michaelbronco  2 года назад

      Well thank you for that. Very nice to hear.

  • @jeffreyjurgensmier3447
    @jeffreyjurgensmier3447 5 лет назад +24

    Do have a list if the materials required and step-by-step instructions?

  • @Thebodystop
    @Thebodystop 12 лет назад +2

    This is awesome!!! Just what I've been looking for in a one man/woman building project.Thanks so much for this!!! :)

  • @Jenslilhomestead
    @Jenslilhomestead 12 лет назад

    Very nice craftsmanship. Good clear instructions. Thanks.

  • @minjungkim9756
    @minjungkim9756 11 лет назад +2

    Thank you for your post. Hopefully I can have a garden soon. Nice to see your kids helping you.

    • @michaelbronco
      @michaelbronco  11 лет назад +1

      My pleasure. Never thought so many folks would like this. Glad I decided to film that day! And yes, it is nice to have my kids around to help. They're all hard workers.

  • @SP2333
    @SP2333 13 лет назад +1

    Great design. I decided to use this frame type for my chicken yard fence. But I'm using round 4" posts for the main uprights. It looks great so far thank you.

  • @michaelbronco
    @michaelbronco  11 лет назад +6

    James, thanks for the questions. This may help others. First, be sure to have the fence facing downward so that it;'s natural tendency is to curl towards the ground. Place a board across both ends and place a heavy object on top of each board. Do this while preparing the rest of the boards. You can use spring clamps to hold the first 2 1x4's. Work down the sides first, then do the bottom last. It'll be easier to keep tension. 2 sheets of plywood would also flatten fence, (fence sandwich)

  • @michaelbronco
    @michaelbronco  14 лет назад +3

    Swivelgate, great tip. There are a few things that can be done to improve, no question, but it 's simple and most folks can tackle it. I do like the idea of screws.

  • @myopinon74
    @myopinon74 14 лет назад

    Thank you for simplifying this task for me! Can't wait to get started. Knowing my hubby he'll say he did it himself..... I dont think so..! lol. thanks again!!

  • @TheRealJohnJ10
    @TheRealJohnJ10 4 года назад +1

    I’m building for this exact fence with your plans. I love it. Thanks for the video.

  • @margemargie9891
    @margemargie9891 3 года назад +1

    beautiful. wondering what to use since price of lumber is 40% up right now.

    • @michaelbronco
      @michaelbronco  3 года назад

      Lumber is up 400% right now. I wish it was 40. Honestly, I don't know what to recommend. I've put off all projects for now.

  • @michaelbronco
    @michaelbronco  11 лет назад

    I used a post hole digger to set the posts in the ground 2 feet deep. Since the posts are pressure treated there is no need to coat them with anything. They're good to go for at least 15 years. I did use concrete in all the corners and for the gate posts for extra strength. Hope it helps.

  • @ericalexander4734
    @ericalexander4734 4 года назад +1

    Our bunnies have no problem flying through the 2” wire fencing. This year we are solving it with .22 caliber lead but next year we will be installing 1/2” hardware cloth on lower 1.5’.

  • @michaelbronco
    @michaelbronco  12 лет назад +1

    @njitgrad 3' deep with crushed gravel will work fine. And you're correct, it does in fact do a better job with moisture. Not really a fact with treated lumber as it last for years, either way. Just be sure to put the gravel in slowly and evenly as you go. Otherwise, you'll push the post to one side with the weight of the stones.

  • @michaelbronco
    @michaelbronco  13 лет назад

    @njitgrad No worries. Yes, 8' posts. Just put a level to it once the concrete is poured. They'll stay level if you don't hit them before the cement dries. Get the post setting kind and all you have to do is add water. The dirt around the middle posts will be ample to keep the middle posts from moving. You can fill with stone if concerned. That'll do the trick.

  • @SteveB-he1bu
    @SteveB-he1bu 8 месяцев назад

    Great video. What would you say is the recommended spacing between the posts?

  • @Drexelle
    @Drexelle 10 лет назад +1

    I'm actually about to break ground on a fence of my own today. Following a similar pattern and believe I'm going to adopt your 1x4-wire-sandwich concept. Great look and structurally sound. I agree that 1x4 is less likely to warp than the 2x4 (not to mention much less bulky). Like at least one other commenter, I'm uneasy about toe-nailing. Seen this lead to cracks. Planning to try using a Kreg Jig and screws to secure the 1x4's into the 4x4s. Should be very secure. Just worried about excessive penetration of the wood. This'll be my first fence project... and it's not the type of thing I'll have time to do again anytime soon. Going to evaluate brackets, but am doubting they'll be the correct width, and may also be too much of an eye-sore for the Mrs...

  • @kestrel6245
    @kestrel6245 9 лет назад

    Looks great. Nice solid fencing that will last.

  • @NVRGVUPGA
    @NVRGVUPGA 13 лет назад

    Just what I was looking for! Going to attempt my first square foot garden and I know that I will need to fence it in with all the deer we have in N. GA. Wish me luck, cause I'm the "handy" one of the house.lol Thx for the video. :)

  • @ManishKumar-ud5so
    @ManishKumar-ud5so 6 лет назад +1

    Thank you Michael! I am building a fence to secure my vegetable garden from the rabbits. Your video is very helpful.

  • @SEAhris
    @SEAhris 3 года назад

    I happened upon this video on this day April 6, 2021. Eleven years after the release. Thanks for the idea, I will be building something similar.

  • @michaelbronco
    @michaelbronco  12 лет назад +1

    Hey, thanks for the compliment. Glad you like the video and hope it helps you with your fence plans. I'll be posting some more similar stuff soon!

  • @michaelbronco
    @michaelbronco  12 лет назад

    Hi, and thanks for the comment. Screws would split the wood. Nails on an angle are as strong as it gets. The fence has been up for quite a while now and hasn't budged or split a bit. Hope that helps.

  • @hckicker94
    @hckicker94 11 лет назад +1

    Michael…Thanks for the ideas. I used your plan and I’m in the middle of building my fence. I’m a “weekend warrior” and I always make some mistakes…but it’s looking good. I did use some joist brackets to help me. I posted a response video. Please provide any suggestions.

  • @michaelbronco
    @michaelbronco  13 лет назад

    @zareckymr I used1.5 inch screws ...if you need to go longer don't worry if they come through the other side a bit. Just file the sharp points down.

  • @michaelbronco
    @michaelbronco  11 лет назад +1

    Correct, all corners and posts are cemented only. It's just an alternate overlap. Look close and you can see how the top boards overlap the bottom joints. As long as you have all the boards cut to the right dimensions it'll come together.

  • @michaelbronco
    @michaelbronco  14 лет назад

    @aSimplePotter I set my posts at 8' but you can go as far as 10'. If you want to go longer than I suggest replacing one of the 1x4's with a 2x4 so that you have a 2x4 and a 1x4 sandwiching the fencing. Hope this helps.

  • @michaelbronco
    @michaelbronco  12 лет назад

    @njitgrad Honestly, I wouldn't worry about it. The new treated lumber is set to the standard of the EPA which is over the top now a days. Raised beds are recommended in any case. All you have to do is pile the soil high and plant. That's a raised bed! Don't over think this. Your project will turn out great.

  • @michaelbronco
    @michaelbronco  13 лет назад

    @ds3mml3r I just looked again and see why it may be confusing. The bottom course just lays flat on the ground and is not held together. I appears as though it may be but I just laid it out under the fence.

  • @michaelbronco
    @michaelbronco  12 лет назад

    @bigjontube Definitely concerned about the treated stuff near the garden. For this reason, I raised the beds considerably and used regular lumber to frame out the beds. Locust is perfect if you have access. Cypress is exceptional and very cheap. As to the animal burrowing we haven't had any issues but you can just extend the mesh under the ground about a foot. Cut it so that it extends from the bottom of the frame.

  • @lekkaafrikaans
    @lekkaafrikaans 12 лет назад

    Hey Michael thanks for the upload, really good tips, i am going to use your idea´s for my garden in South Africa.. greetings from Holland

  • @michaelbronco
    @michaelbronco  13 лет назад

    @zareckymr If you use 1-5/8 you'll be perfectly fine. There will be about an 1/8 inch gap in between boards from the fence material that will prevent the screw from coming out the back. If the 1x4's were sandwiched flat then it would be a different story. FYI I found 1-1/4 galvanized at a hardware but to be honest the 1-5/8 will work better.

  • @GideonGardens
    @GideonGardens 11 лет назад +2

    Nice fence. That is a project I have to tackle pretty soon to replace the ragged fence that came with the property we just bought. I want to congratulate you on your book, it is a subject that is sorely overlooked in our society. Manhood has almost become a thing of the past and needs to be addressed and dealt with. Thank you, Ann.

    • @michaelbronco
      @michaelbronco  11 лет назад +2

      Thank you Ann, for your kind words and enthusiasm for both the fence and the book. I am currently working of a trilogy of novels for young readers dealing with the important role of fathers, and how the absence of fathers leads to terrible consequences. Crossing my fingers that it gets noticed! Thanks again.

    • @GideonGardens
      @GideonGardens 11 лет назад

      Michael Bronco I'll do all I can to promote it. God bless!

    • @GideonGardens
      @GideonGardens 10 лет назад

      ***** I'll see if there is somewhere I can make a suggestion.

    • @thefictionxwelive
      @thefictionxwelive 8 лет назад

      +Michael Bronco Awesome about the book (and the fence)!

  • @patriciamenio7545
    @patriciamenio7545 11 лет назад +1

    I love this fence design...looks nice and is simple enough for me to do (I think!). But I would need a taller fence because of deer problems. Would this same design work with a taller fence...perhaps adding another board in the center horizontally for stabilization?

  • @electerrific
    @electerrific 11 лет назад

    greate video thanks for sharing. i love garden fencing and your video learn so simply...how to build a simple garden fence

  • @douglasvilledarling2935
    @douglasvilledarling2935 11 лет назад

    Looks nice...fence is good too. ;0) That is what I have been thinking about making for my garden. I was also thinking about putting the cross pasture fence look on it as well. Great job. Thanks for the post.

  • @sharoncc9192
    @sharoncc9192 9 лет назад

    You should have been a teacher ( or maybe you are?). Your instructions are so simple to understand, and detailed, I love your videos!

  • @marineoceania
    @marineoceania 3 года назад

    This video is AWESOME, thanks so much for making it!

  • @pjf883
    @pjf883 8 лет назад

    OMG ! Personnel choice on what wood you use. Thanks for the How To ,Love the simplicity and look. Just what I wanted to see.Great job Thank-you ! So much better doing each panel ,instead of all the ones I seen on stretching the wire etc.I let you know how it turns out !

  • @michaelbronco
    @michaelbronco  12 лет назад

    Hey, thanks. Fence hasn't budged a bit in over two years now. Engineering works really well to keep it all square and plumb.

  • @michaelbronco
    @michaelbronco  12 лет назад

    Yes, you are correct. The other two lines are to mark the distance only. Take a good look at that section of the video and make sure you understand how it works before you go ahead and cut. I used two-times the thickness of the board to mark my cut. It can be done with measurements also but this is just easier.

  • @michaelbronco
    @michaelbronco  13 лет назад

    @njitgrad Hi, I spaced mine 8' apart. Your best bet is to set your corners first then divide the space in between. Just run a string from corner to corner to line up the holes. Don't space more than 8' but less is fine. Concrete the corners but not the middle posts. If you have a drainage issue put about 4" of stone at bottom of holes. I went 3' deep on posts.

  • @willcu
    @willcu 10 лет назад

    Awesome fence. looks simple to make. do you also have a DYI video on making a gate for your garden fence?

  • @swivelgate
    @swivelgate 14 лет назад

    Very nice set up and looks very clean . I would add one thing a little more work .If you would have used a pocket jig and screwed the ends and flip them so the screws were in that would have trued up the corner and the joints would be tight. . Also ,you nailed the lengths to the 4x4 if you screwed them you would have ben able to remove them if you wanted easier. But, thats just me great job and thanks for the video... Happy Gardening

  • @9amStudio
    @9amStudio 11 лет назад +18

    amazing! I'm going to follow your technique for building a fence yard for my dogs

    • @michaelbronco
      @michaelbronco  11 лет назад +5

      Would make a great dog enclosure. Very solid, attractive, and most importantly, dog won't feel confined. Good luck with it.

  • @shantahsieh335
    @shantahsieh335 4 года назад +43

    woodprix has very useful plans with all details I need

  • @carenblue
    @carenblue 9 лет назад +34

    When you get a chance, would you kindly make a video about how to make a gate in a welded wire fence?

  • @njitgrad
    @njitgrad 13 лет назад

    @michaelbronco How tall were your posts? 8 feet?Did you put the posts in any sleeve or just straight in the hole then poured in concrete? How do you keep the posts level upright while pouring the concrete? And why no concrete on the middle posts? How do they stay upright? Thanks again, sorry for all the questions.

  • @michaelbronco
    @michaelbronco  12 лет назад

    @njitgrad Folks seem to like that stuff but I never did. I like to get regular old concrete - mix it up in a wheel barrel and put it in a little at a time. I think if you use the kind you're talking about you might have to brace the posts before pouring the water in. Just drive some 2x2 pegs in the ground and then run some 1x4's on an angle from the post to the pegs. that'll keep them from moving.

  • @njitgrad
    @njitgrad 12 лет назад

    @michaelbronco maybe raised beds would be best...i prefer a neat look so I think I'll make the beds out of untreated lumber...how did you make yours?

  • @njitgrad
    @njitgrad 13 лет назад

    @michaelbronco How did you lay them out? How far apart are they spaced? Was hoping you had a video of that part.

  • @pjf883
    @pjf883 8 лет назад

    Nice my son built this fence for me. Looks great ! Any suggestion's on gates ? Think we will match the fence. However will it be to heavy. Also maybe would like to use 1x4 instead. Thoughts ? Putting Light caps on the 4x4's too. Thx for your design for fence looks great !

  • @samtran1434
    @samtran1434 10 лет назад

    nice fence. i like how clean it looks.

  • @michaelbronco
    @michaelbronco  12 лет назад

    Wow, great compliments. Don't know what to say...but I am so glad that I was able to connect you with your grandfather through my book. I'm sure there are parts that will speak to you more than others, which was my intention going in. Keep in touch.

  • @michaelbronco
    @michaelbronco  13 лет назад

    @njitgrad Nope. Actually it's the ones in concrete that rot the quickest. But if you use pressure treated lumber (you should) they'll last for at least 15 years (more if they're not set in concrete. Masonry holds moisture which is why wood rots quicker if it is set in concrete. I wouldn't worry though. Like I said, just use treated lumber.

  • @webbit1518
    @webbit1518 5 лет назад +2

    The actual name that is given this style of fence is Hogwire or Trellis....Very nice job sir.

  • @DesNReg
    @DesNReg 4 года назад

    This is wonderful and simple! Could this be used for a gate for the front of a house? To keep dogs out?

  • @michaelbronco
    @michaelbronco  12 лет назад

    @MegaDarryl1960 The angle bracket idea is a good one. They'd have to be fairly wide.

  • @m.b.8505
    @m.b.8505 2 года назад

    Hello! What’s holding the boards of the first half of the fence together while you’re laying down the wiring? Thanks!!

  • @dongyinao1569
    @dongyinao1569 3 года назад

    hi sir hows life long expand of the wood fence? its nice fence

  • @TheNishadnyc
    @TheNishadnyc 11 лет назад

    I loved your videos..very educational and informative. Thank you.

  • @jm2628
    @jm2628 7 месяцев назад

    I need to know what screws you used for this. The 1¼screws I bought are just pulling out

  • @vickiguntergraham4712
    @vickiguntergraham4712 3 года назад

    This looks really nice.

  • @gunsofaugust1971
    @gunsofaugust1971 5 лет назад +1

    Can anyone recommend a video that shows a lower budget garden fence? This a great design and clear instructions, but I don't have a nice saw, and that much money for lumber. thanks

  • @njitgrad
    @njitgrad 12 лет назад

    I could use some advice on how to handle an uneven ground when it comes to adding the fence panels. It wasn't as obvious then as it is now after I put my posts in, but my garden slopes from front to back by a few inches. I'm thinking of laying 4x4s between each post. Where the elevation is lowest, the post will be above ground and where it is the highest it will be mostly below ground. This will give me a level foundation for the bottom of the fence panels. Do you think this is a good idea?

  • @michaelbronco
    @michaelbronco  12 лет назад

    @njitgrad It sounds as if you're doing a basic foundation wall of sorts (at the lowest points) and stepping it to the highest point. Not a bad way but you don't have to spend money on the posts is you simply step the fence. In other words. Dig a small trench at the highest point so that the fence will set down in the trench at the highest point. The tops of the fence won't be even (which is fine) just be sure they are level. I've seen this done before and it looks and functions perfectly.

  • @ledonnek1974
    @ledonnek1974 12 лет назад

    Great design. Any reason you didn't use screws to connect the fence to the Posts?

  • @njitgrad
    @njitgrad 12 лет назад

    which type of concrete did you use? I was going to use quikrete. the one you pour in straight from the bag and add water afterwards.

  • @jameshayden
    @jameshayden 10 лет назад

    Hi Michael
    Great video. One thought though. Should you make all four corners overlap for a stronger sandwich? By that I mean that you would have no full length cross members (top or bottom). All four horizontal boards would be the gap between the posts less the 3.5 inches for the vertical board width. Does that make sense?
    Thanks

    • @michaelbronco
      @michaelbronco  10 лет назад

      Thanks for the question. I think we're on the same page. All four corners do in fact overlap to make a stronger frame. You'll notice if you look closely.

  • @kalebcoleman9416
    @kalebcoleman9416 7 лет назад +3

    Is there any way to make the panels easily removable? Maybe slide them into galvanized fence brackets or something?

  • @michaelbronco
    @michaelbronco  12 лет назад

    Hi, to answer your question, I didn't create any type of channel. Just build the panels so that they fit precisely inside the posts. You can leave about a quarter inch for float adjustment. Now, I toe (angle) nailed the frames into the posts using 8 penny galvonized nails. Alot of folks arent' comfortable with this type of nailing (although it should be mastered by any carpenter) so they use either screws or some type of frame built on either side of panel. You can use strips of 1x1.

  • @michaelbronco
    @michaelbronco  14 лет назад

    jagarito, I just use a good old fashioned level. Simple as that. If you use stones around the post just be sure to pack it nice and tight and check level as you go. For concrete just be sure to not mix too wet or the post could move.

  • @michaelbronco
    @michaelbronco  12 лет назад

    My pleasure Andy. Glad the tip helped. Happy gardening!

  • @sharpestjim
    @sharpestjim 11 лет назад +4

    The wife wants me to build an enclosure for her geese. I love this design - appears to be very easy but sturdy and effective. A couple of (dumb) questions:
    1) What is the best way to hold the initial four 1x4's together prior to "sandwiching" the wire fencing?
    2) Is there a trick to tensioning the wire fencing prior to "sandwiching"?
    Thanks in advance!

  • @thekillbotfactory
    @thekillbotfactory 10 лет назад +2

    A question about the fencing section. When you fasten it to the boards, how are the boards secured? Is it with the screws? If so, what size? I'm going to fence in a 30 foot by 30 foot section for a garden and this is the best looking one I've seen. Could you give a quick step by step list or list the supplies for it all (screws included?) thanks. I really appreciate it.

    • @michaelbronco
      @michaelbronco  10 лет назад

      I toe-nailed the boards using #6 galvanized nails. I know some folks aren't comfortable with using nails, but I've been building for over 30 years and don't have a problem with splitting when using this technique. Has to be the correct angle.

  • @njitgrad
    @njitgrad 12 лет назад

    Wanted to know your opinion of using crushed gravel instead of concrete to secure the corner (and middle) posts? I'm not sure how productive my garden will be this year (just bought my house last fall) so if it doesn't work out, I won't need to get a post puller to rip out 9 concrete posts. iIve read that crushed gravel is actually better at keeping moisture away from the posts. For my 8-foot posts I plan on making holes 36" deep using 6" base gravel and 30" for post. Thoughts?