I know the pic on this video doesnt look so clear is because phone cant handle the light of the projector but with ur naked eye u can see very good quality Plz let me know after u try this settings😊
Settings List Below Display Sound Picture Quality Preset Mode Custom Backlight 0 Contrast 50 Brightness 70 Sharpness 55 Color 50 Tint 50 Advance Settings Smart Picture Mode off HDMI PC Auto Preset Mode Custom Dynamic Light On DCI Low Black Extension Middle TNR Low Color Temperature Standard Gamma 2.0
@@soniya1827 it helps on brighting the picture If u cant find this options check my develope mode video u can open develope mode and then picture settings will show up
@@ProjectorsScreen thnx for the reply. I have enabled developer setting but what i mean is its difficult to understand what difference does it make in changing the individual settings...
@@ufukcihan9367 yes Gray Screen should work I buy one gray screen from.china but this was not good it was shiny gray not good Suggest gray paint better
Great video my friend, works at hy320 perfectly as well. Did you observe some problems with projektor after few months of usage ? I have seen some comments reg "yellow" spots probably Connecticut with burned Lens or sth
@@kamilkrasinski3512 bro this cheap projector is not worth it to pay for any repair but for any remote location is best choice instead of TV is easy to carry w u and other benefits
@@shaunakerman2755 first time i heard this maybe u need different hdmi head otherwise should work hdmi in see this one Versatility descritions says input HDMI allegro.pl/oferta/projektor-led-magcubic-hy300-4k-bluetooth-10000-lm-wi-fi-android-16334389866
hello.. i was trying to change the brightness settings and all of a sudden all i can see is a black screen. i just want to do a factory reset at this point jist to reset everything. can you pls do a video step by step on how to reach the factory reset option? i cant see anything
This will happend when you change color temperature to sth which makes screen black. You can try to go the settings a change it to standart. Or i could make an video, where i show you, which buttons you need to push to go there.
Hi Mr. Projector and Screens: i got Always screen Tearing when i watch on my Google Chrome stick on this HY320 !! Do you know whats the Problem ?? Thx in advance.
@@Mile19825 Hey! One common reason for this issue could be the refresh rate not matching between your device and the display. You might want to check the refresh rate settings on both the Chrome stick and the HY320 to see if they are in sync. Let me know if that helps! I had this issue after update apps couldnt open because i change date and time to manual and that caused the problem so must be Auto Date and Time must be in Auto Please all Hy300 picture settings color temperature dont change it can go to black screen
go to "about device" then click "about device" and hit the okay button on your remote until it says "Developer mode is turned on". Then you should see the extra settings!
Bro i return one cause of that it is because u messed up the settings and now u cannot see nothing dont touch nothing on projector onlymaybe if u add something via HDMI then u may be able to change the settings
Switch it on. Once on main screen press the power button. Go to reboot/restart press ok. When the screen goes black, keep pressing the home button non stop until the logo appears. Then, you will see a big circle appear and something weitten in mandarin. It will restart by itself and take you to home page, rebooted to its factory settings. Download your apps again, and log into them again.
Amigo una pregunta actualice el proyector HY 300 pero al iniciar No pasa al sistema android , es decir no entra al menu principal, entra de una vez a la opcion hdmI, como si yo hubiera elegido esa opcion, es muy raro y todo paso despues de la actualizacion. En una ocasion me paso lo mismo pero vi un video donde dan un truco precionando los botones ariba a bajo derecha izquierda del control del proyector , pero ya no recuerdo como era el orden en que se debia precionar y no consigo el video donde lo enseñan si alguien me puede decir se lo agradezco.
Hermanos encontré la solución se debe apagar el proyector y se vuelve a prender luego mientras inicia se presiona un ratico el boton de las 3 lineas es el botón que esta al lado de la casita, luego presionas la siguiente secuencia de Botones. Arriba derecha abajo izquierda y luego el Boton ok y listo.
Just uploaded a video how to fix BlackScreen in Hy320and hy300 U touch somewhere and ur screen is black please watch this video below ruclips.net/user/shortswLZK7HI8BOg?si=kwwfBg11yWULo39U
To all Please there is one option where ur screen will come black becarefull if this happens at this moment u must keep going with the same button u went to this stuppid option Hy300 has i dont remember which one is and i am scared to try it but if it happen just keep pushing same button for next move so dont get stuck there The issue after is u cant see anymore where to go zero I saw some videos where u connect to pc via USB maybe there is an option or to return to seller
I know the pic on this video doesnt look so clear is because phone cant handle the light of the projector but with ur naked eye u can see very good quality
Plz let me know after u try this settings😊
Just Subscribed you please share if Possible
Link plese
Settings List Below
Display Sound
Picture Quality
Preset Mode Custom
Backlight 0
Contrast 50
Brightness 70
Sharpness 55
Color 50
Tint 50
Advance Settings
Smart Picture Mode off
HDMI PC Auto
Preset Mode Custom
Dynamic Light On
DCI Low
Black Extension Middle
TNR Low
Color Temperature Standard
Gamma 2.0
Is it possible to explain what these settings mean exactly and what does it do to the image which makes life easy to make changes as per user taste?
Yes if you can explain us about the settings?
@@JatinPatadia2 u mean the option ?
When u buy this projectors they ddont have develoled mode please see my develope mode video onmy chanel?
@@soniya1827 it helps on brighting the picture
If u cant find this options check my develope mode video u can open develope mode and then picture settings will show up
@@ProjectorsScreen thnx for the reply. I have enabled developer setting but what i mean is its difficult to understand what difference does it make in changing the individual settings...
hello brother, I have the same projector. I have a question. Can you could also use this projector with a gray screen and/or high contrast screens?
@@ufukcihan9367 yes Gray Screen should work
I buy one gray screen from.china but this was not good it was shiny gray not good
Suggest gray paint better
Hello!! Why the hdmi input lose so much quality in the picture!? Anyway to solve it?
@@mdptweety this projectors are china made any connection not good but i suggest maybe ur device has also settings going out signal
Hello, there are a lot of black spots on my screen around the edge of the projector. How can I fix them?
@@Editz2121 need to open and clean it not easy to do it but thats the way try with vaccum maybe works
Hello. But my hy300 pro doesn't have this developer option and advanced sett. Why?
ruclips.net/video/guv7bXRNztU/видео.htmlsi=HB8ZA_TVWUR3GwvI
Just uploaded quick video how to turn on develope mode
Great video my friend, works at hy320 perfectly as well. Did you observe some problems with projektor after few months of usage ? I have seen some comments reg "yellow" spots probably Connecticut with burned Lens or sth
@@kamilkrasinski3512 bro this cheap projector is not worth it to pay for any repair but for any remote location is best choice instead of TV is easy to carry w u and other benefits
Perfect settings than what i had thank you
@@waitformehaha5532 thank you for ur Comment🤍
My hy 300 only has HDMI out can this be changed.plesse help I want to connect a xbox to it
@@shaunakerman2755 first time i heard this maybe u need different hdmi head otherwise should work hdmi in see this one Versatility descritions says input HDMI
allegro.pl/oferta/projektor-led-magcubic-hy300-4k-bluetooth-10000-lm-wi-fi-android-16334389866
hello.. i was trying to change the brightness settings and all of a sudden all i can see is a black screen. i just want to do a factory reset at this point jist to reset everything. can you pls do a video step by step on how to reach the factory reset option? i cant see anything
This will happend when you change color temperature to sth which makes screen black. You can try to go the settings a change it to standart. Or i could make an video, where i show you, which buttons you need to push to go there.
ruclips.net/video/YD9avu1YpPE/видео.htmlsi=Yn5qKuoF-Q_cnUnP
Hi Mr. Projector and Screens: i got Always screen Tearing when i watch on my Google Chrome stick on this HY320 !! Do you know whats the Problem ?? Thx in advance.
@@Mile19825 Hey! One common reason for this issue could be the refresh rate not matching between your device and the display. You might want to check the refresh rate settings on both the Chrome stick and the HY320 to see if they are in sync. Let me know if that helps!
I had this issue after update apps couldnt open because i change date and time to manual and that caused the problem so must be Auto
Date and Time must be in Auto
Please all Hy300 picture settings color temperature dont change it can go to black screen
@@ProjectorsScreen thx for your Request: i got already the Solution: The HY320 only Support 1080p 24Hz With the Google Stick.... greetings.
Algun consejo con el audio, le conecto un parlante y aun asi sale bajo el audio
Hey I have the same projector but I don’t seem to have advanced settings in mine how come ?
@@Flako_94 check out my Developed mode video
go to "about device" then click "about device" and hit the okay button on your remote until it says "Developer mode is turned on". Then you should see the extra settings!
hey bro, I cannot get the image sharp on all sides what am I doing wrong? How do I get my image sharp on all corners?
@@ufukcihan9367 checkkeystone Correction to Manual and maybe not to far from the wall
Also try to clean the lamp with smooth towel
What is the cause of black spots at the bottom of the screen?
@@norkhe5554 actually this is from dust i will not open and clean it cause is to cheap whenever is no good i buy new one
@Lorabi111 I also have the same stains in it, thank God, it’s just a dust problem. Thank you
when i want to transmit netflix from my phone, the hy300 isnt in the list of devices
@@matias.Blaskovic netfix should be already in Hy300
If not try update your Projector and should come out
From phone mine is very slow
Hello,
After last update, i can not enter settings, it gives a black screen. Can u advise for the sollution?
Bro i return one cause of that it is because u messed up the settings and now u cannot see nothing dont touch nothing on projector onlymaybe if u add something via HDMI then u may be able to change the settings
ruclips.net/video/YD9avu1YpPE/видео.htmlsi=Yn5qKuoF-Q_cnUnP
Do this. Restart then press home until u see yellow circle . After that it will reset ur settings
I have the same problem but my screen is white, I try anything :(
Switch it on. Once on main screen press the power button. Go to reboot/restart press ok. When the screen goes black, keep pressing the home button non stop until the logo appears. Then, you will see a big circle appear and something weitten in mandarin. It will restart by itself and take you to home page, rebooted to its factory settings. Download your apps again, and log into them again.
I need help plz its not working
ruclips.net/user/shortswLZK7HI8BOg?si=kwwfBg11yWULo39U
Sorry for delay i just found it how to fix it
Hi to all
i dont know how to check who subscribed me so i can subscirbe u back
Maybe u can coment ur username here so i can add u back
Thank youuu
My projector Hy 300 has not the option of brightness contrast color what should i do?
@@muhammadnazimkhan5799 please check out my videos i have a video for developed mode setup
Plz send me link @@ProjectorsScreen
@@muhammadnazimkhan5799 ruclips.net/video/guv7bXRNztU/видео.htmlsi=JBsCsaaOp1gmwDW5
New Upgrade SNR high
Thank you
How can I remove the black spots
@@kashdon2451 need to open and clean but is not easy to do it
Amigo una pregunta actualice el proyector HY 300 pero al iniciar No pasa al sistema android , es decir no entra al menu principal, entra de una vez a la opcion hdmI, como si yo hubiera elegido esa opcion, es muy raro y todo paso despues de la actualizacion. En una ocasion me paso lo mismo pero vi un video donde dan un truco precionando los botones ariba a bajo derecha izquierda del control del proyector , pero ya no recuerdo como era el orden en que se debia precionar y no consigo el video donde lo enseñan si alguien me puede decir se lo agradezco.
Hermanos encontré la solución se debe apagar el proyector y se vuelve a prender luego mientras inicia se presiona un ratico el boton de las 3 lineas es el botón que esta al lado de la casita, luego presionas la siguiente secuencia de Botones.
Arriba
derecha
abajo
izquierda
y luego el Boton ok
y listo.
Hi I have no option advanced settings
@@aussieloteluguammai7834 check out my Develope Mode video how to setup develope mode
My projecter doesn’t enter the settings
@@F-uv8jz see my Develope
Mode video u have to develope it first if u have hy300
@@F-uv8jz there is always settings available sometimes u have to connect in PC to change the settings the way u want it
Just uploaded a video how to fix BlackScreen in Hy320and hy300
U touch somewhere and ur screen is black please watch this video below
ruclips.net/user/shortswLZK7HI8BOg?si=kwwfBg11yWULo39U
To all Please there is one option where ur screen will come black becarefull if this happens at this moment u must keep going with the same button u went to this stuppid option Hy300 has i dont remember which one is and i am scared to try it but if it happen just keep pushing same button for next move so dont get stuck there
The issue after is u cant see anymore where to go zero
I saw some videos where u connect to pc via USB maybe there is an option or to return to seller
That happens when you're choosing the temperature of the color (standard, cold, warm...)
omg this happened to me is there any solvee?
@@sweetangel2331 me i return the projecto should be a way with PC but not sure how
ruclips.net/video/guv7bXRNztU/видео.htmlsi=HB8ZA_TVWUR3GwvI
Develope Mode Option quick video how to do it
Just uploaded Develope Mode Option video check my channel
We have the latest Verison, so that video procedure doesn't take back into the setup mode
@@sudipguragain7181 yes if it is above hy300 if it is hy300 then u need develope mode
ruclips.net/video/LpNR9xKkdLI/видео.htmlsi=0IPNPOOB_bv21BBP
ruclips.net/video/6kKm_igCbFM/видео.htmlsi=pyukifW_txKgQoGN