UPDATE‼️ Before leaving a negative comment about the screw color. Know that Marconi Armory has taken over the new magwells and NO MORE SILVER SCREW‼️ I have an updated video reviewing it.
Watched your other video about having issues with it going into battery. Same thing was happening to my G34 clone build. Spoke to someone at Timney since my trigger was not resetting correctly. He said replace the trigger housing and connector with Glock OEM parts and it should fix it. I was skeptical but did it anyways. Absolutely fixed all my issues plus seems to run so much smoother! Just a thought if you’re still having problems.
Good run through on how to install. That rear button heat screw is big, seems like it would feel nasty in the hand. I would at least need to paint in black.
That screw poking out looks terrible now. And yup that looks like would dig in hand while firing. This is a big L for me. Looks good on frame until that screw is inserted.
I like that… Brotha, thanks for this option. I also have that same frame from Brownell’s. Must’ve gotten it between 12-18mos ago. Finally got all my parts. When I attempted to put my Strike Industries magwell on it seemed like it didn’t fit. Damn it!!! So, back to the internet looking for other options. Only thing was it kept bringing back to what I already had. However, many of the pics in this search result had pics of the actual SCT frame with the same magwell. At which point I was confused, because… why didn’t mine fit? It was at that very moment a light went off in my head about that lip you mentioned. My whole concept of how it mounted was all wrong. Didn’t realize it must be coaxed over the outer edges magwell over the frame sides while guiding the front leading edge of the frame into the magwell forward lip. Voila… Holy sh!t… I was about to buy another one. How many would I have ended up with?!?! Your magwell design is different… it just bumps up against the bottom. This design allows the frame to seat into itself. Think I’m going to pick one up like yours for the next build. Not particularly crazy about that hardware color they included with that kit. Stands out a bit too much on your build for me. Would go great on a build that includes other accessories with matching colors. Maybe a color option for customers would’ve been a good idea; let the customer decide. Again, thanks for the video.
This may be a crazy question but have you shot it in that configuration yet ? I love the mag well but I’m concerned about that screw digging into my hand while firing!!
I don't think it will... but there's about a 99% chance that it's a common screw that you can replace with a better one. A lot of them don't even protrude through the hole. They're like "grub screws" or "set screws". Just gotta make sure you have the right thickness, length and threads. (You can usually cut or grind them to length if you need to).
I for the life of me cannot get this magwell to fit the SCT. The front will not stay in place, it seems that the lip on the bottom of the SCT is to thick for the magwell. I have tried every angle I can and the front will not stick.
Hey brother, this question might seem silly- the last pin near the back of the grip-How does it have a red tip. How did you come by that color on the pin? Thanks man
Loving the set up I need to get a mag well for mine and Arcan makes some great stuff. Wish I could find a black screw that goes in the back of the frame though hat holds the plug
That is the Strike Industries EMP. They have them for both the G19 and G17. Make sure to order the correct one because they have a slight difference in profile.
Any updates on how it’s holding up? I removed this magwell from my strike 80 because I would notice a lot of play and didn’t want it cracking the polymer where the hole for the screw is. It fits tight and secure on my p80 though
It fits but it’s loose. There’s no front lip to grab on to cause up/down wobble so that’s why Marconi doesn’t recommend it for the S80. Use at your own risk.
Smael men’s watch. You can find it on Amazon for around twenty bucks. I use it as my work watch. I’ve had three so far and people think it’s a g shock all the time. Keeps my actual g shock from getting messed up while at work.
Yeah I really like it also. I was considering cutting down the front of the frames handle, so the mag well would fit flush against the frame. Could not bring myself to dremel it however. Now I kinda like how that little step affords some leverage for my pinky finger. That pinky squeeze helps me to find the red dot quicker. Try it , it actually helps. Pick your weapon up and point aim , then squeeze your pinky, there’s the dot. Peace bro , first time quality
Imagine being Glock and being so good that 100s of companies make/sell parts for your guns... but being so bad that 100s of companies make/sell parts for your guns. (....and usually better).
Anyone else think that Brownells should bullnose all their slides like they do their 34 slides or is that just me? This build looks good as hell but I think it would be much better if Brownells would offer bullnosed slides other then just their 34
Strike 80 mag well fits terrible, if you put any pressure on the front lip it just flops around. Looks good for the gram, not practical for actually shooting.
UPDATE‼️ Before leaving a negative comment about the screw color. Know that Marconi Armory has taken over the new magwells and NO MORE SILVER SCREW‼️ I have an updated video reviewing it.
Man thank you thank you thank you... just picked up my first gen 3 clone for a song and didn't want the plastic magwell!
@@JustonWilliams-l4e happy to help!
Watched your other video about having issues with it going into battery. Same thing was happening to my G34 clone build. Spoke to someone at Timney since my trigger was not resetting correctly. He said replace the trigger housing and connector with Glock OEM parts and it should fix it. I was skeptical but did it anyways. Absolutely fixed all my issues plus seems to run so much smoother! Just a thought if you’re still having problems.
Good run through on how to install.
That rear button heat screw is big, seems like it would feel nasty in the hand. I would at least need to paint in black.
That screw poking out looks terrible now. And yup that looks like would dig in hand while firing. This is a big L for me. Looks good on frame until that screw is inserted.
So Marconi Armory took over the design and it come with a black screw now. As for the screw head poking out, it doesn’t dig in at all
The Mag Well looks great , but i don't like that back screw sticking out like that i wonder how a recess screw would look ?
I like that… Brotha, thanks for this option.
I also have that same frame from Brownell’s. Must’ve gotten it between 12-18mos ago. Finally got all my parts. When I attempted to put my Strike Industries magwell on it seemed like it didn’t fit. Damn it!!! So, back to the internet looking for other options. Only thing was it kept bringing back to what I already had.
However, many of the pics in this search result had pics of the actual SCT frame with the same magwell. At which point I was confused, because… why didn’t mine fit?
It was at that very moment a light went off in my head about that lip you mentioned. My whole concept of how it mounted was all wrong. Didn’t realize it must be coaxed over the outer edges magwell over the frame sides while guiding the front leading edge of the frame into the magwell forward lip. Voila…
Holy sh!t… I was about to buy another one. How many would I have ended up with?!?! Your magwell design is different… it just bumps up against the bottom. This design allows the frame to seat into itself.
Think I’m going to pick one up like yours for the next build. Not particularly crazy about that hardware color they included with that kit. Stands out a bit too much on your build for me. Would go great on a build that includes other accessories with matching colors. Maybe a color option for customers would’ve been a good idea; let the customer decide.
Again, thanks for the video.
Most versatile magwell, fits so many frames 🦾
It sure is and sure does!
Love my Arcane magwell. Definitely gonna order another one for my other SCT frame
They are definitely the go to for the SCT!
Looks good. Im gathering parts for the same build. Cant wait to see you shoot it!
Looking forward to another range trip!
I hope a SCT 17 magwell comes out soon. I emailed SCT twice.. and zero replies...😐
Arcane has heard your thoughts about the screw guys. He is working on updating the screw color!
👀👀👀👀👀 thank you bro! I appreciate the love.
Gotta show love where love is due bro. Thanks for taking the time to show me how to get the magwell on! 👊💯
I’m gonna have to look for the PF940c as I’m not happy with the magwell on there I got. My syndicate on my V2 is perfect
I have a Syndicate on my PF940c. Might swap it out with an Arcane now!
This may be a crazy question but have you shot it in that configuration yet ? I love the mag well but I’m concerned about that screw digging into my hand while firing!!
I’ve shot a few mags out of it. Nothing felt bad so far but it was just a light range day.
I don't think it will... but there's about a 99% chance that it's a common screw that you can replace with a better one. A lot of them don't even protrude through the hole. They're like "grub screws" or "set screws". Just gotta make sure you have the right thickness, length and threads. (You can usually cut or grind them to length if you need to).
I for the life of me cannot get this magwell to fit the SCT. The front will not stay in place, it seems that the lip on the bottom of the SCT is to thick for the magwell. I have tried every angle I can and the front will not stick.
It’s a little tricky but it should work if you follow my directions step by step
Hey brother, this question might seem silly- the last pin near the back of the grip-How does it have a red tip. How did you come by that color on the pin? Thanks man
Sorry for the delayed response. It’s the Strike Industries pin set.
Looks hella clean!
I appreciate it bro! 💯👊
Loving the set up I need to get a mag well for mine and Arcan makes some great stuff. Wish I could find a black screw that goes in the back of the frame though hat holds the plug
Ace or true value have them. I changed mine out for black too.
I agree, the black screws would look nicer! Thanks for watching brother!
@@TacticalBuffoonary I bet it definitely blends in more with the frame. Thanks for the info!
@@tacticaltrashpandaIt definitely looks better with the black screw.
What’s the Mag extension you got?
That is the Strike Industries EMP. They have them for both the G19 and G17. Make sure to order the correct one because they have a slight difference in profile.
Any updates on how it’s holding up? I removed this magwell from my strike 80 because I would notice a lot of play and didn’t want it cracking the polymer where the hole for the screw is. It fits tight and secure on my p80 though
It fits the SCT nice and snug.
You should look into strike 80 magwells I believe it be a close to direct fit.
I know the frames look similar but it doesn’t fit unfortunately.
@@tacticaltrashpanda the s80 magwells do fit, i have one on my sct frame
I also have one and Strike 80 magwell fits perfectly! The SCT 19 is a clone of the strike 80 frame!
S80 strike industries fits perfect also fyi
It fits but it’s loose. There’s no front lip to grab on to cause up/down wobble so that’s why Marconi doesn’t recommend it for the S80. Use at your own risk.
@tacticaltrashpanda can you please try or just let me (us) know if this magwell will work/fit on the SCT17 frame?
Unfortunately it won’t fit. I tried it on day one.
@@tacticaltrashpanda thank you appreciate the reply happy holidays to you and your loved ones.
Love your channel man I just ordered a sct frame because of your videos 😅
I appreciate the love man! Glad I could be an enabler! 😂👊
What about the Tyrant CNC magwell for the p80 does it fit the SCT
Best looking p80 on yt
Thanks man
Hate those kinda screws... set screw and lock tite
Where do you get mags like that?
It’s the Strike Industries +5 emp
Any companiesthat make an extended mag release for the sct frame? I have one and it always feels like a pain depressing the release so far
Mine felt the same way. I ended up making it work by slowly taking material off the mag release button with some sandpaper.
Glock
Do they have a magwell for the SCT 43?
Aim surplus just released it. Last I checked, it was sold out already
What iron sight is this?
@@Mettaworldj night Fision optic ready
Hey I know this is off topic but, what kind of watch are you wearing? Thanks in advance.
Smael men’s watch. You can find it on Amazon for around twenty bucks. I use it as my work watch. I’ve had three so far and people think it’s a g shock all the time. Keeps my actual g shock from getting messed up while at work.
@@tacticaltrashpanda I thought it was a gshock also, I'm definitely getting one to check it out.
Good job bro, was that my suggestion?😊
I don’t remember tbh. This magwell was a blessing from Arcane himself. 🙏
Yeah I really like it also. I was considering cutting down the front of the frames handle, so the mag well would fit flush against the frame. Could not bring myself to dremel it however. Now I kinda like how that little step affords some leverage for my pinky finger. That pinky squeeze helps me to find the red dot quicker. Try it , it actually helps. Pick your weapon up and point aim , then squeeze your pinky, there’s the dot. Peace bro , first time quality
What Holster did you get to work with the TLR1 ?
Most Glock holsters should fit. The retention is all on the Light.
@tacticaltrashpanda will this work for the SCT17 frame?
What compensator is that?
Strike industries micro circle comp
There’s just a screw sticking out the back now?
It’s didn’t get in the way. It’s a rounded head.
Is that a Brownells slide?
Yes
My bad I didn't hear that part! My desktop was on low! Great video!
@@israeldehoyos9217 no worries, I appreciate it man
Imagine being Glock and being so good that 100s of companies make/sell parts for your guns... but being so bad that 100s of companies make/sell parts for your guns. (....and usually better).
Bro, this is exactly why I got into building in the first place! 💯
Good video bro
Appreciate it!
Anyone else think that Brownells should bullnose all their slides like they do their 34 slides or is that just me? This build looks good as hell but I think it would be much better if Brownells would offer bullnosed slides other then just their 34
I agree, it would be nice if they did offer it.
I see no magwell on their website
1776supplycohasthem
There 50 doll hairs
I had to say it that way because Jewtube keeps deleting my post.
You should also be able to find them on his E bay. AT_Esales
Yeah didnt see it either.
I usually think magwells make guns look bad... but this one looks alright. Sometimes I think they just look kinda clownish.
Yeah, I know what you mean bro. I like simplicity with purpose but also needs to look good!
Will be getting but 100% grapping a flat head screw, and probably black, that thing is tack as hell lol
New ones from Marconi Armory are all black with the new version w/ flat head
This fits actual p80 v2 frames? Anyone know?
Yes it will!
@@tacticaltrashpanda thanks just got me one !
@@DGgaming05 You’re gonna love it! 👊
Have you found an iwb holster that fits the SCT frame?
Not a proprietary holster yet but it should fit a Glock holster with a WML.
Hilliker Holster co. makes one specific for the sct
@@theskatemaster2011 life saver 🙏
Black Smith tactical g19 holster also fits!
Etsy
That rear screw looks like he doesn’t belong otherwise good magwell
Arcane is working on that!
Beownells
SHWEEEEEEEEET!!!!!!
🫡👊
Shame he discontinued this magwell..... sigh
Go check out @marconiarmory 😉
Strike 80 mag well fits perfect
Tried it. Didn’t work. Did you have to modify it?
was going off what Tactical toolbox had said. I about to get one and try it
Did you get the Strike 80 magwell for G19 or the Strike 80 magwell for the Strike 80 frame?
Strike 80 mag well fits terrible, if you put any pressure on the front lip it just flops around. Looks good for the gram, not practical for actually shooting.
@@CosmicGumbo626 yeah found out the hard way
My only gripe is that stainless steel screw poking out the back 😖
It’s an eye sore for me but that’s just me
Yup that shit is terrible. If it were black and flush it would be perfect
I agree, a black screw would look better!
@@tacticaltrashpanda Actually shows black screws on the package flap thing in your video. Odd that you got stainless ones
That screw sticking out is hideous.
Message was heard. Marconi Armory took over doing the magwell. I have a video on the updated version.
That rear screw looks awful.
New batch will soon have black screws
lol so the best magwell for the sct frame isnt the sct magwell? 😂😂
This video was published before the SCT magwell was released 🤔. But even so, if you want an aluminum magwell, it’s still the best.
That screw on the back ruins the look and makes it look cheap
New ones come with a black screw. Arcane stopped making them but Marconi Armory picked back up!