I usually don't care much for "ideas" because they're normally nonsense but I loved every one of these and plan on making a couple of them myself. Thank you so much.
I watch all of these videos on building a fence for a router and/or a drill press and you all wast money on "T" tracks when all you need is a bolt and a clamp. You don't need the fence to be parallel because where ever the fence is will be parallel to a point and that is what the drill bit and/or the router bit is.Any kind of track or slot is not needed at all. A pivot point and a clamp will always get you a good fence position. A "T" track in the fence is a good part as you can fasten lots of things on it but two slots in the table is not necessary at all. I like the idea of a round insert for the drill to go into and then when it gets bad, you can install another one. Nice!!! Log cutting jig - very nice and I might have to make one!!!
Beautiful! However, If I may recommend, @9:45 I would change the hex bolts to round over bit style to avoid the possible knuckle scraping. Awesome re-use of the jack. I will do this one day.
Die Werkbank ist sehr gut geworden. Statt des Handgriffs zum Festziehen hätte ich einen Adapter gebaut, um einen Akkuschrauber anzuschließen. Geht einfacher damit.
Great video the only thing that would make it better is to get more information like measurements the video doesn't show much of that but it was some very good ideas
Fico muito admirado com a sua criatividade e habilidade com que que executa seus inventos. Tenho muitas ferramentas e até faço muitas coisas de diversas áreas ligadas a marcenaria, elétrica, pintura, construção etc.. mas tudo por hobby. Mas a minha maior dificuldade é de espaço (oficina), que é meu sonho. Meus parabéns e continue nos prorcionando grandes aulas de criatividade e amor pelo que faz.
Человек единственное существо на планете земля способный говорить. Эта способность существенно ускорила все созидательные процессы в социуме человеческого общества. Голосом передаются новости, идеи, концепции, без речи невозможно представить современное общество и цивилизацию в целом.
2:30 not so good.. what you do if you have to use a shorter drill...the stop is too high,,,,12:30,,use some masking tape on the disk and it will not get paint too
Какие убогие козлы🤦♂️ ножки держутся на пружинах и только. Он сам чуть не сложился в конце, когда их проверял 🤣 Тиски! Изначально тройник сажал на вытяжную заклепку🤦♂️ в конце сюжета, мы видим, что догадался поставить болт 🤣 Он реально думал, что заклепка будет держать такие нагрузки? А вообще тиски классные.
thank you for sharing the video to view and I wish the channel more success
Вся подборка ВЕЛИКОЛЕПНА.
I usually don't care much for "ideas" because they're normally nonsense but I loved every one of these and plan on making a couple of them myself. Thank you so much.
Есть полезные идеи!!! Для тех у кого есть мастерская, будет кстати)))👍👍👍👌
Your work is second to none simply great may God continue to bless you and your family well done. Bottom line
Impressive build quality and attention to detail!
Здоровские идеи и воплощение отличное👍
I have watched all of these videos separately in the past. Nice seeing a compilation like this! Definitely bookmarking this video! Great work CW! 👍👍👏👏
le concept des traiteaux c est extra je copie ! Merci beau tuto et bon travail !
I watch all of these videos on building a fence for a router and/or a drill press and you all wast money on "T" tracks when all you need is a bolt and a clamp. You don't need the fence to be parallel because where ever the fence is will be parallel to a point and that is what the drill bit and/or the router bit is.Any kind of track or slot is not needed at all. A pivot point and a clamp will always get you a good fence position. A "T" track in the fence is a good part as you can fasten lots of things on it but two slots in the table is not necessary at all. I like the idea of a round insert for the drill to go into and then when it gets bad, you can install another one. Nice!!! Log cutting jig - very nice and I might have to make one!!!
Congratulations: Your ingenuity amazes me, they are all excellent, but this support project is spectacular for me
Congratulations my friend amazing ideas!!! Always be well!!!
Beautiful! However, If I may recommend, @9:45 I would change the hex bolts to round over bit style to avoid the possible knuckle scraping. Awesome re-use of the jack. I will do this one day.
Some really good ideas in this collection. Thanks for sharing.
I didn’t see the diy track in the thumb mail though!! Another good idea
Благодарю вас,за то что делитесь опытом и очень хорошо это показываете.
great woodworking workshop
Thanks
Love it! Still did not understand the saw horse flexible bolting system.
Muchas gracias por compartir...!!! Saludos desde Uruguay...!!!
Congratulations all your projects are great
Die Werkbank ist sehr gut geworden. Statt des Handgriffs zum Festziehen hätte ich einen Adapter gebaut, um einen Akkuschrauber anzuschließen. Geht einfacher damit.
Great video the only thing that would make it better is to get more information like measurements the video doesn't show much of that but it was some very good ideas
Love the work bench a lot.
I’ve seen all of these and my favourite is the bandsaw jig. Really like your channel I’ve gained so much knowledge from you so thanks
Gracias por compartir; puras obras de arte
Perhaps, for the rotating painting base, instead of wooden pegs, nails would be better, they cover less surface (?)
Awesome projects, dude! Nicely done! 😃
Stay safe there with your family! 🖖😊
⁰00⁰p😊A
Thanks for sharing those tips and the make!
Fico muito admirado com a sua criatividade e habilidade com que que executa seus inventos.
Tenho muitas ferramentas e até faço muitas coisas de diversas áreas ligadas a marcenaria, elétrica, pintura, construção etc.. mas tudo por hobby.
Mas a minha maior dificuldade é de espaço (oficina), que é meu sonho.
Meus parabéns e continue nos prorcionando grandes aulas de criatividade e amor pelo que faz.
The vice table is Top Notch work! Great idea that I will be replicating for myself.
Excellent sir ❤
The Log cutter with the ban saw is the cats M.Good Job
영상 잘 보았습니다! 풀청 으로 응원 합니다.💞💞💞💞💞💞
Ну что тут сказать? Дас ист фантастиш! :-)
may I ask which country your are living in ?
Thank you for this useful video!
Класс
Muy buenas ideas gracias thank you
Awesome work! 👍
Excellent ideas and camerawork. You might as well patent the saw horse
Portable bank press was too good
Человек единственное существо на планете земля способный говорить. Эта способность существенно ускорила все созидательные процессы в социуме человеческого общества. Голосом передаются новости, идеи, концепции, без речи невозможно представить современное общество и цивилизацию в целом.
Excellent merci pour cette vidéo👏👏👍👍😊😊
Couple of nice tips there. Thank you.
The thumbs up after every whatever is WAY over used on YT. Great ideas and jigs
Cool.nice job
just any way cooooollll!
Very nice good job
Obrigado amigo por compartilhar essas idéias 🤝👏👏
Lots of cool stuff thanks for sharing ✌️
Echt klasse 👍
Die compacte werkbank is wel wat :) Maar zelf zou ik m dan misschien maken met rails voor die spanners.
Great work
Ich fand es sehr gut
They look pretty heavy
👏👏👏👏👏 PARABÉNS 👏👏👏👏👍
Nice
👍🏼
Excelente
Very interesting projects, thanks. The music was unbearable, clicked off.
Are plans available for these projects??
Hello! All available plans are there
Facebook facebook.com/groups/ivancrazyworkshop
Эх. Еще б размеры😉 Ладно. Сами сообразим
👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼🎉😎
👍👍👍👍👍👍👍
😉😉👍🏻👍🏻
2:30 not so good.. what you do if you have to use a shorter drill...the stop is too high,,,,12:30,,use some masking tape on the disk and it will not get paint too
no dust collector?
Для любителя сложно. А для профессионала деревянная оснастка не очень надёжна и точна
Какие убогие козлы🤦♂️ ножки держутся на пружинах и только. Он сам чуть не сложился в конце, когда их проверял 🤣
Тиски! Изначально тройник сажал на вытяжную заклепку🤦♂️ в конце сюжета, мы видим, что догадался поставить болт 🤣 Он реально думал, что заклепка будет держать такие нагрузки? А вообще тиски классные.
Dakika 15, yay sistemi 3 defa seyrettim. Anlamadım
Є люди, які думають головою
как минимум верстак был убого скопирован из интернета. ruclips.net/video/JMmvyaBUhO8/видео.html
Посмотри качество того что тот мужик сделал и моего, небо и земля. По факту то видео я вообще первый раз вижу.
Так что не надо норм верстачок получился. И покупатель через день на него нашелся.
А за коммент спасибо! 👍
@@CrazyWorkshop не согласен, а за остальное пожалуйста)))
Глупости , полезного не вижу.
*Да нахер такая работа с таким гемороем*