Your hard work and dedication really amazes me. All that work for just the fuel tanks, something that is barely visible from the front when displayed. And yet you give it as much attention as the other, more visible parts. I wish to have your patience someday. Love your work, you inspire me. 💕
Such an inspiration and love the editing. Its so chill and relaxing. I've built and painted third party resin kits, however your videos are giving me inspiration to completely customise my Sazabi and try my hand at some of your techniques
Do you also make jewelry? A lot of these skills and tools seem like they line up very well with working with intricate, delicate, and precise items. It's very very very cool, and you do fantastic work.
오늘도 좋은 영상과 제작 모습 잘 봤습니다. 볼 때마다 계속 배워가는 것 같습니다. 저도 좀 열심히 만들어야하는데 시작하기도 전에 "이걸 시작하면 또 몇시간이나 걸릴까..."하는 걱정이 먼저 앞서 도리어 손을 안대게 되는 요즘이네요...... 좀 더 즐기면서 할 수 있도록 해야겠습니다. 다음 영상도 기대하고 있겠습니다.
저도 새로 킷을 시작할 때마다 이번에는 간단히 작업하고 도색해야지 하고 마음먹고 시작하면 어느 순간 패널 파고 프라판을 자르고 있더라고요 ㅎ 하지만 시간이 걸리고 고생한 만큼 만족스러운 결과물이 나오더라고요. 멋진 작품을 하나 만든다 생각하시고 천천히 즐기면서 해보세요^^
Just wow.. i repeat watching the whole process again and again and again.. and never get me bored.. Thx for sharing such amazing work.. How you manage to release the magic sculpte like that from the fueltanks without broken both sculpture and fueltanks ?
Awesome work sir!! .Im guessing how do you tranform from average to next level pieces?. What guides you through till the finish piece is this all planned or do you make them up as you go.
in the malls we have pasta, milk and eggs 😂... you're lucky! I have to buy on the internet 😢... and ... you're great !!!! your models and videos are poetry, thanks !!!
You haven't disappointed yet, I only hope my work will one day be as good as yours. P.s. make a facebook page so your fans can share and support your work even further! Thank you again, for the amazing video.
It is a gundam that was completed before starting the RUclips channel. So I deleted it because there was no video of the process. I have a photo of providence on my IG :D
◼︎ 제작의뢰 및 완성작 구매 문의 (Commission & Purchase Inquiry)
jackers7@naver.com or instagram DM (ravi_pla)
Notice - blog.naver.com/jackers7/222348230829
대한민국에 이런 분이 계시다는게 자랑스럽습니다 ㅎㅎ
Perfect....
제닉님께 제가 하고 싶은 말입니다 ㅎㅎ
Your hard work and dedication really amazes me. All that work for just the fuel tanks, something that is barely visible from the front when displayed. And yet you give it as much attention as the other, more visible parts. I wish to have your patience someday. Love your work, you inspire me. 💕
Thank you for your comments.
우리나라에 이런 숨겨진 고수들이 많다는게 참 놀라울 따름입니다 프라 취미가 많은 이들에게 더 익숙하면 더 많은 고수들이 나올텐데 그 점이 참 아쉽네요 많이 들으시는 말씀이겠지만 볼때마다 감동받고 갑니다 감사합니다 이런 영상 올려주셔서요^^
좋게 봐주셔서 감사합니다^^ 저도 프라모델 취미가 좀 더 많은 사람들에게 알려져서 익숙한 취미가 되었으면 하는 바램입니다.
Dopest gunpla builds I've seen on RUclips.
工作精度が高すぎる・・・
パテ盛りからパーツ自作してしまうとかマジですごい
Such an inspiration and love the editing. Its so chill and relaxing. I've built and painted third party resin kits, however your videos are giving me inspiration to completely customise my Sazabi and try my hand at some of your techniques
一つ一つの丁寧と慎重が積み重なって、感動を呼ぶんですね……。
毎回毎回待ち遠しく待ってます!
ほんまに凄いですよね!観てて気持ち良いです!
もぉ終わりに近付いてるし完成形を見るのが楽しみの様な悲しい様な
次作にも期待しております!
いつも視聴していただいてありがとうございます
I smile Everytime another layer of depth is added to the parts you make
thanks 😄😄
この動画のup主さんコメ全部に返信してるのすげーよな
内容もすっごい好き(語彙力の欠如)
사포질 해봐서 아는데...
진심 이형님 노고가 대단하심....보기만해도..손이 저려옴
10만원대 킷을 1000만원짜리 이상으로 만드셨녕
Im discober your Channel few days ago, and now, i Saw all your videos. I like your work so much, and im cant wait to see the gunpla full asemble
볼때마다 감동과 좌절이 함께하네요
끈기 노력 시간 정성 아이디어...모두 대단하십니다
좋게 봐주셔서 감사합니다 ^^
Amazing. Simply amazing. Really inspired me to try and make my models look better. Thanks for the videos and please keep them coming.
Woooowwww. I’m so inspired to get into gunpla bc of your talent and vision. Keep up the great work and videos.
Your models and videos are poetry...
I thank you so much for sharing what you live during creation
What a amazing job! You are inspiration to Brazilians!
Watching your video like a theraphy to me..I’m so amazed by your detail work and your work so inspiring!!
Thanks :D
Watching this video gave me a bunch of ideas just seeing what you use and how you use it I will practice on some of my HG kits and see what I can do
Do you also make jewelry? A lot of these skills and tools seem like they line up very well with working with intricate, delicate, and precise items. It's very very very cool, and you do fantastic work.
That is some sick work. Wish I had half the talent you have
Great work. What did you use as the base for the black propellant tank?
Thank you.
대단한 작업입니다. 정말이지 감탄이 절로 나네요 ㅎㄷㄷ
와~~이건 프라모델이 아닌 그냥 공작 수준인데..
멋지네요~전 언제나 이렇게 만들어볼수 있을까요 흑흑 ㅜ,.ㅜ
Do you have pics showing the different changes you made?truly awesome. Would like to replicate.
Another great video. Always look forward to notifications.
The before & after comparison is stunning. Excellent vision & execution.
Thank you for the compliment.
8분 동안 즐거운 시간 되세요 ^^
다음 영상은 도색 작업 영상을 업로드할 예정입니다.
Have a good 8 minutes :D
The next video will upload the painting work video.
RAVI PLA 이야 도색 작업 영상도 기대되네요~ ㅎㅎ
항상 응원하고 있습니다~👍
J Sanctuary 응원 감사합니다^^
내가 작업하는 것도 아니고
내가 가질 수 있는 것도 아니지만
완성 됐을 때의 모습이 이렇게 기대되는 작품은 또 처음이네요
제 기대 이상의 작품이 나왔으면 좋겠어요ㅋㅋㅋ 화이팅 입니다
RAVI PLA this gunpla is the best detailed one ive seen. Lol.. what a skill
Amazing! Is the chisel different from the scribing blade/tool? Or can I start my panel lines with srciber only?
いつも見ていて気持ちのいい工作。
最高です。
힘내라!!!!
ありがとうございます。
This is where I think I will start on my sinanju stein narrative, thank you
모델러 여려명 봤지만 이 분이 최고인것 같아요 ㄷㄷ
과찬이세요. 좋게 봐주셔서 감사합니다^^
아니 이정도 실력을 쌓으려면 도대체 얼마나...
참 쉽게 작업을 하시니 참으로 부러울 따름입니다
작업하는 것보다 디자인 구상하는 게 더 힘드네요 ㅠ
素晴らしいです。発想力豊ですね🎵
ありがとうございます。
오늘도 좋은 영상과 제작 모습 잘 봤습니다.
볼 때마다 계속 배워가는 것 같습니다.
저도 좀 열심히 만들어야하는데 시작하기도 전에 "이걸 시작하면 또 몇시간이나 걸릴까..."하는 걱정이 먼저 앞서
도리어 손을 안대게 되는 요즘이네요......
좀 더 즐기면서 할 수 있도록 해야겠습니다.
다음 영상도 기대하고 있겠습니다.
저도 새로 킷을 시작할 때마다 이번에는 간단히 작업하고 도색해야지 하고 마음먹고 시작하면 어느 순간 패널 파고 프라판을 자르고 있더라고요 ㅎ 하지만 시간이 걸리고 고생한 만큼 만족스러운 결과물이 나오더라고요. 멋진 작품을 하나 만든다 생각하시고 천천히 즐기면서 해보세요^^
Hi..great work at panel line scribing! What type of tape are you using as guide to scribe on the gundam piece?
Thank you!
홈을 내실때 어떻게 저래 일정한간격으로 홈을 파내시는지...대단하십니다 ㄷㄷ
なんなんだこの天才は
끈기있고 섬세한 작업과정에 감탄했습니다.
좋게 봐주셔서 감사합니다^^
そういう才能が羨ましいですね!尊敬します🥺
Just wow.. i repeat watching the whole process again and again and again.. and never get me bored..
Thx for sharing such amazing work..
How you manage to release the magic sculpte like that from the fueltanks without broken both sculpture and fueltanks ?
I've covered only half of it to separate it.
끈기가 대단하십니다 정말 멋져요!
사자비 작품 역사에 남을 역작이 기다려집니다
끝까지 멋지게 만들어보겠습니다^^
I cannot wait to see the finished model. It looks amazing.
Awesome work sir!! .Im guessing how do you tranform from average to next level pieces?. What guides you through till the finish piece is this all planned or do you make them up as you go.
omg ! this is so much work, great result !
멋진 제작기 잘 보고 있습니다. 혹시 매직스컬피는 어디서 구입이 가능한가요? 그리고 에폭시 퍼티와는 어떻게 다르죠?
nice music, love the scribing process
Thanks :D
Can't wait for the next video!
Speechless man👏👏👏👏👏👏
Amazing work!!! You are truly a master of your craft!!!
Thanks :D
You are Great! Can I ask where I could buy the "6mm scribing guide tape"? Thanks!
I bought it from the Korean model mall.
in the malls we have pasta, milk and eggs 😂... you're lucky! I have to buy on the internet 😢...
and ... you're great !!!!
your models and videos are poetry, thanks !!!
You haven't disappointed yet, I only hope my work will one day be as good as yours. P.s. make a facebook page so your fans can share and support your work even further! Thank you again, for the amazing video.
I am thinking about creating a Facebook page. Thank you for your advice.
그저 감탄만 하고 갑니다..
점점 더 기대됩니다 👍
좋게 봐주셔서 감사합니다 ^^
우와......작업기 너무 잘봤습니다!!ㅋ 영상미도 너무 괜찮고 너무 멋지네요!!!! 당연히 작업도 너무 좋게봤습니다!!
좋게 봐주셔서 감사합니다 ^^
RAVI PLA 프라모델을 이렇게 아름답게 효현하는거는 처음봤습니다... 놀랍습니다 :]
TOY LIFE 과찬이세요~ 감사합니다^^
Excellent work.
What magic sculpt brand do you use?
I use 'IPP' brand.
너무 잘 만드시는거 아녜요?
오리지널 킷이 정말 너무 단순했었구나 싶네요^^
멋집니다^^
새해복많이받으세요~
오늘도 영상을 기다리며..ㅋㅋ화이팅~
닝기님도 새해 복 많이 받으세요^^ 그동안 좀 바빠서 작업을 못했네요 조금만 더 기다려주세요^^
すげ〰️😲格好いい👍
Your panel lining has helped me a lot. Thank you.
I'm glad that I could help you :D
What is the tape you use for creating panel lines??
thats a nice design for a pen
파트 1부터 꾸준히 보고있는데 정말 대단하다는 말 뿐이 안나오네요 ㄷㄷ
곡면에도 디테일 업이나 부품 만드시는 센스가 대단하십니다.
사자비를 마치시고 여유가 되신다면 크샤트리아도 상당히 멋진 작품으로 승화시키실 것 같은데 한번 도전해주시길 조심스레 기원해봅니다 ㅎㅎ...
좋게 봐주셔서 감사합니다^^ 사자비에 너무 지쳐서 당분간은 간단한 킷을 할 거 같아요ㅠ 크샤 한 번쯤은 만들어보고 싶은 킷이라서 나중에 기회 되면 만들어보겠습니다^^
Excellent work, thanks for sharing your techniques.
Thanks for watching :D
정말 이세상 실력이 아니십니다
볼때마다 놀라워요
배우고 싶습니다
좋게 봐주셔서 감사합니다 ^^
Thank you very much for making videos, I never miss them, cheers :D.
Thanks for watching :D
AAAAWWWESOOOMEE work as always! ❤️ I am now having an idea on how to modify the so-plain propeller tank of MG Hi-Nu Verka!
Hi-Nu Tank is also a good parts for detailed work.
Nice job! What was that material that you used to make the last custom part with, putty?
It's a material similar to epoxy putty.
원통도장으로 우주선으로 만드셨네요..대단하세요.정말 많이 배웁니다. 따라하지는 못할것 같아요..ㅠㅠ
좋게 봐주셔서 감사합니다 ^^
That's amazing 👏 😍
Every time I try to do scribing, I become Homer Simpson making a barbeque.
도색편도 기대 됩니다.
how do you design these panel lines? how do you make them symmetric?
Oh no ravi why did you take down your older videos! Even those models like the providence were amazing
It is a gundam that was completed before starting the RUclips channel. So I deleted it because there was no video of the process. I have a photo of providence on my IG :D
@@RAVIPLA oh okay good just making sure i can still see it
this is Amazing!!!
역시 엄청나십니다!!👍👍
매번 좋게 봐주셔서 감사합니다 ^^
부품 자작하시는거 보고 지리고 갑니다.
팬티가 남아나질 않네요.
좋게 봐주셔서 감사합니다 ^^
這個細緻度真的超棒!!🤜🏻🤛🏻
謝謝。
what a tape? daymo tape or ordinary tape?
Thank you for a such nice tutorial video,you really have a really serious skill for this..👍👍
Thank you for the compliment :D
People! Stop what you're doing! Ravi-nim uploaded new video!
haha, Thanks :D
와.. 정말 와...존경합니다
앞으로도 꿀팁 대방출해주세요!!
좋게 봐주셔서 감사합니다 ^^
와.. 장인이십니다.
좋게 봐주셔서 감사합니다 ^^
すごっ!
Excellent !
ありがとうございます。
장난아니네요... 감탄하구갑니당!
좋게 봐주셔서 감사합니다 ^^
i wish that the BMC chisels were a bit more widespread because the shipping and import cost for them is like the same price as the chisel itself
Hello Ravi, what clay you are using at 8:42?
A+B Epoxy putty?
6:18 Magic Sculpt
Dreadpool thank you . It seems less sticky than epoxy putty
Magic sculpt is a material similar to epoxy putty. Stick less to hand than epoxy.
와 진짜 대박이시네요 아예 새로하나 만들어내는 수준...;
좋게 봐주셔서 감사합니다 ^^
Amazing!!! Love your work thank you for your videos. They help out a lot.
Esgar Thanks :D
Bellissimo come sempre
Sei un maestro
Grazie.
건프라룰 밥 아저씨처럼 하시네요 ㅋㅋㅋ 힐링되는 영상 잘 봤습니다.
선댓글 후감상하겠습니다....8분이 또 금방지나가겠네요....
매번 봐주시고 댓글도 남겨주셔서 감사합니다 ^^
예술입니다^^
감사합니다 ^^
You really do great in detailing bro! I hope i'd learn to do this
Thanks :D
패널라인의 예술 잘보고 있습니다.
좋게 봐주셔서 감사합니다 ^^
Absolutely amazing!
히야 항상 잘보고있습니다 완성까지 파이팅
파이팅! 감사합니다 ^^
진정 프라깎는 장인입니다
과찬이세요. 감사합니다 ^^
Insanely good.
Thanks :D