John! Tom from Easton here. I didn't know you have a you tube page. Thanks for all the support with my sx's and ss xi skis. The Billet Rock County intake grate you have is amazing for my 650 sx, love it! New subscriber!
John’s a great guy, I ordered an sbn44 from him pre jetted for my application for an additional charge and he did it for free and it works incredible no adjustments needed at all
Hi John. Would you say a Solas Concord 12/18 produces comparable pump pressure to a Hooker 10/16 Large hub? I really want a Hooker 10/16 for my modded 750bp swapped 550, But im also considering getting a Higher pitch Solas Concord because they're cheaper. Looks like Solas makes an 11/16 and 12/18 concord so I have a few options if I decide to go that route. Any input is appreciated. Thanks
Hello Tye, thank you for watching. The Solas Concord is a good impeller. BUT it is no hooker.... The hooker is more efficient, Thus the 10/16 pitch vs the 12/18. Hooker is cut back. You could send out your concord to be modded, cut back, ect, but then why not just buy a hooker, that is good right out of the box?
Hi John, I have a 2000 XLT with the SBN44 I's and the 12/18 Solas pushing it and it has serious snappy power low and mid, but. That was someone elses setup that owned this ski and it only reaches 46-47 mph. I want it more cruiser efficient for long rides. What will get me back into the 60 mph range?
Thank you for watching. Yes, we like the Solas 12/18 concord (for 08-later). You can use it in all years SJ. We have them available here if you want, and offer our blue print service as well.
Hello Peter. Please reach out to me at the shop. I'd be happy to get you set up. All of our contact info can be found at my Watcon Website. You can call, or email. John
Where can you be reached at looking to put new impeller on 2002 seadoo rx, but don't know what to go with. Only topping out at 40mph. Stock ski with solas water grate.I'm 185lbs
![Oscar Maydon x Fuerza Regida - Tu Boda [Official Video]](http://i.ytimg.com/vi/_ymicn0_GYc/mqdefault.jpg)
John! Tom from Easton here. I didn't know you have a you tube page. Thanks for all the support with my sx's and ss xi skis. The Billet Rock County intake grate you have is amazing for my 650 sx, love it! New subscriber!
John’s a great guy, I ordered an sbn44 from him pre jetted for my application for an additional charge and he did it for free and it works incredible no adjustments needed at all
As always informative and helpful info worth the watch and worth calling to firm your order decisions.
Thanks for watching, and the kind words.
Good discussion of riding styles and what works best in the real world.
I’d love to see a video this detailed just on freestyle pumps and the differences between them, super cool videos
Thanks for watching Jack. I'll try to get a pump comparison video next time we have one on the bench here....
Thanks for the informational video.
I have a kawasaki 1100zxi what mid range impeller do u recommend
Hello, thanks for your video. Can you help me choose the best one for my jetskit GTI SE 170 2023 thanks
Thanks for watching. Please reach out to me at my shop.
Hi John. Would you say a Solas Concord 12/18 produces comparable pump pressure to a Hooker 10/16 Large hub?
I really want a Hooker 10/16 for my modded 750bp swapped 550, But im also considering getting a Higher pitch Solas Concord because they're cheaper.
Looks like Solas makes an 11/16 and 12/18 concord so I have a few options if I decide to go that route.
Any input is appreciated. Thanks
Hello Tye, thank you for watching. The Solas Concord is a good impeller. BUT it is no hooker.... The hooker is more efficient, Thus the 10/16 pitch vs the 12/18. Hooker is cut back. You could send out your concord to be modded, cut back, ect, but then why not just buy a hooker, that is good right out of the box?
Gotcha. That’s good to know. I’m just going to buy a Hooker then. (No pun intended 😂) Thanks for the info
Hi John, I have a 2000 XLT with the SBN44 I's and the 12/18 Solas pushing it and it has serious snappy power low and mid, but. That was someone elses setup that owned this ski and it only reaches 46-47 mph. I want it more cruiser efficient for long rides. What will get me back into the 60 mph range?
Please reach out to me at my shop. Thank you
@@watercrafttalk2738 ok, I'll call today! Thanks
what is an acceptable clearance on the kawasaki 1100 zxi wear ring
I would consult a shop manual for your ski. That will give you all the specs you need to know.
So the 12/18 Concord for a stock SJ running buoys would be a good choice?
Thank you for watching. Yes, we like the Solas 12/18 concord (for 08-later). You can use it in all years SJ. We have them available here if you want, and offer our blue print service as well.
Hi John ,
what impeler you recommend if I change the pump for 155 for SJ 730, b pipe, head, msd enhancer, light flywheel, please? Thanks
Hello Peter. Please reach out to me at the shop. I'd be happy to get you set up. All of our contact info can be found at my Watcon Website. You can call, or email. John
What would u recommend for a tr-1 superjet with a light tune and a 200lb rider
Please reach out to us at the shop. I need to know what ski, what engine, what mods, rider weight, and elevation where you ride.
What would you recommend for a ‘85 550 with sbn44 and bread box. Looking at a skat 13/16 or 15 straight pitch.
Where can you be reached at looking to put new impeller on 2002 seadoo rx, but don't know what to go with. Only topping out at 40mph. Stock ski with solas water grate.I'm 185lbs
Hello Mederic, thank you for the reply. All of my contact info is at my web site, www.watcon.com, email, phone number, etc.
I have a 1200 xlt what prop and ignition to improve power?
Thank you for watching. Please reach out to me at the shop for impeller recommendations.
I have a 2016 255 wake scarab with twins 250 supercharged HO. How can I determine the size wear ring I need (159MM vs 161MM)?
I would recommend taking it apart and measuring it.
What if i just want top end?
You need to build an engine with enough power to pull a steeper pitched impeller, and more RPMS.
Spot on the hooker comments! I’ve tested every one and agree.
solas or skat?
I am sorry, I do not understand your question? Solas or Scat what?
@@watercrafttalk2738 impellers. which has better quality and why?
@@MegHumper They are both great impellers, and both will have plus or minuses.
Good impeler SoLas 15/19 Seadoo Rxp 260 es Good o no corre 73mph o solas 15/20