Bro i swear your literally the best truck youtuber because man you have a sense of style and you know so much keep doing videos man your good at it 🙌🏼 👌🏽
SCORE!!!! So stoked ya guys are so far at "bolt on" repairs! The W9 ya just flipped turned out so niceI look forward to what ya convert this into. I am in Ca and we cant have cool things anymore so seeing how ya guys do these "cool" used trucks is fun to watch!
Man that frame took a hit 😮😮😮 to bust a bellhousing like that, especially since all that energy was transferred from the fuel tank bracket. That would be my luck too if I bought an auction truck 👍🏻🙌🏼👊🏼🔧🔧🔧🔧
My lord join the jet again and buy a compressor and air tools. Working on that heavy equipment has to suck without. You guys know your stuff. I know battery is nice but doesn’t have torque of air.
Milwaukee stuff has more torque than air.. air is in the past. We actually have a 80 gallon compressor and 3/4 and 1” air impact guns. But the Milwaukee stuff beats it everytime
@@CustomRigs its where the oil comes into the crankshaft from the oil galley from the oil filter, the abrasion i saw in your video that metal was past the filter, went into the engine, i would suspect all the rear mains have metal in them, and possible the cam bearings also, if it fell into the oil pan the oil filter may have plugged really fast and the bypass valve would have opened, going right to 4, better cut the filter open also, if you find tons of metal pull the engine and clean it or you may loose the crank and block, also if you find metal in the filter do not reuse the oil cooler for any reason.
Bro i swear your literally the best truck youtuber because man you have a sense of style and you know so much keep doing videos man your good at it 🙌🏼 👌🏽
Thank you bro!
Доброе утро, Тёма! Голос звучит бодро, значит всё сделаете, как всегда, красиво ! Вы МАСТЕРА !
Love the videos, man! Glad to see another project. Can’t wait to see the finished product.💪🏼
Привет. Артем! Спасибо за видео, интересно наблюдать за вашей работой с раком!
Успехов тебе и дяде Вове!
Used to see that truck running around amity and mcminnville area alot. Paul heath had some super clean trucks
Здравствуйте здоровья вам успехов благополучия удачи вам и вашим близким Володе привет из солнечной Башкирии❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
SCORE!!!! So stoked ya guys are so far at "bolt on" repairs! The W9 ya just flipped turned out so niceI look forward to what ya convert this into. I am in Ca and we cant have cool things anymore so seeing how ya guys do these "cool" used trucks is fun to watch!
Hell yeah. Nice, I'm glad the engine and transmission are good.
I was looking at that truck but quickly changed my mind. Can't wait to see the end result
Добрый день. Прекрасный трак получится.
Going to be a very nice truck. Cant wait to watch the upgrades. Peace ✌.
Привнт Артём! Повезло что двигатель и коробка целые.
Gonna be AWESOME once completed
Man that frame took a hit 😮😮😮 to bust a bellhousing like that, especially since all that energy was transferred from the fuel tank bracket. That would be my luck too if I bought an auction truck 👍🏻🙌🏼👊🏼🔧🔧🔧🔧
Best to put New clutch since its already out
Николаича смотрел,показлось,что он сидит под траком.Я еще удивился,как он поместился.А оно вот оно как,он лежа.))))Что ни есть хорошо,на бетоне.
you're the masters, you'll get it right!🤞🤝
I miss your videos keep posting up please
Nice
My lord join the jet again and buy a compressor and air tools. Working on that heavy equipment has to suck without. You guys know your stuff. I know battery is nice but doesn’t have torque of air.
Milwaukee stuff has more torque than air.. air is in the past. We actually have a 80 gallon compressor and 3/4 and 1” air impact guns. But the Milwaukee stuff beats it everytime
Best bet is to get used flywheel housing. Getting new one gonna cost arm and a leg from dealer. Unless you got really good discount
That’s for sure! We found a used one laying at a shop
You guys sure know your 💩......👍🏻👍🏻
Здоровеньки были 🤝👍👍👍
Не были, а булы говорится, услышал где звон, а не знаешь где он, школа тупая, что за привычки писать то чего не знаешь
🤝👍👍👍
How will you go about fixing the frame? Are you just going to replace the whole rail?
No just bend it back and double frame it
Это нас радует, а остальное пчините
Hi Tyoma. Like is always in a corner
🤝✌🏻✌🏻✌🏻👀
the damage at the oil galley is a very very bad thing, you better pull the pan and check #4 main and rod bearing for metal before you start it,
Why exactly the number 4?
@@CustomRigs its where the oil comes into the crankshaft from the oil galley from the oil filter, the abrasion i saw in your video that metal was past the filter, went into the engine, i would suspect all the rear mains have metal in them, and possible the cam bearings also, if it fell into the oil pan the oil filter may have plugged really fast and the bypass valve would have opened, going right to 4, better cut the filter open also, if you find tons of metal pull the engine and clean it or you may loose the crank and block, also if you find metal in the filter do not reuse the oil cooler for any reason.
@@CustomRigs at 5.18 in the video you can see the abrasion
💯👍👍👍💥💫💥💫💥💫💥🤠✌
А+++😊😊😊
Почем в Америці металобрухт?
Привет всем доброго времени суток вам удачи всем 💙💛💖🔥👍👍😊😊😊
That’s a 06 I don’t think that a signature cause signature stop making around 2001
Could've been engine swapped
Isx 870 series is what they have tho
@@scottycollins1829 ok good build
Если вы хотите развитие своего канала , сделайте субтитры на русском языке .
Нажмите на шестеренку и включите перевод субитров на русский. Я так смотрел
36ʼʼ will be better proportionally sick and the end off bunk will be straight on fuel tanks!!!