Nice video. Please do a second one to identify the air/fuel ratio sensor, O2 sensors, external temperature sensor, back-up light switch, and mechanical units like the inner and outer CV joints, ball joints, tie rods, steering gearbox, vacuum lines, etc. Thanks.
Awesome and great Video, from picture quality , details and clarity . I am having a problem with my Honda Accord 06 engine and this is a good start since every mechanic is telling me a different story.
My car engine idle smooth when it is on N or P, but while applying the break and shift to D or P, the RPM goes under 0.5 and the engine shake/vibrate. No one can find the real reason. Any idea, the car has 170K but run really smooth except when it is idle on D or R.
shads77 any check engine light? could also be transmission mount since it only vibrates during drive... Check all your mounts to see if any is broken. If there's a check engine light, could be sensors or switches. Hard to tell without knowing whats going on and the history of the vehicle.
Very well and clearly outlined with sharp and crisp Video footage... A 'walkaround the 2.4l VTEC motor and critical components.. Very helpful to know where these components are and how to actually recognize them! - Great for novices... Thank you.
I am impressed. I have a problem identifying a part on a 2004 Honda Accord and Napa, Carquest, Auto Zone nor O'Riley's could figure it out. But with a brief description and pitiful cell phone photos Nick was able to determine what the part was, sent me a schematic and official name for the part. So Nick is your go to guy for Honda matters.
Nice video, I have a question. What are the small metal tubes (welded together) above the EGR valve called and can they be purchased? The smaller one that has antifreeze going through it is leaking on my 03 Accord.
I have a 200k mi 03 accord standard. It idles up and down all the time. Whether I'm at a stop light or even when I'm driving it jumps a little when I shift because its idling up and down while I drive. Driving or a complete stop it idles up and down. Its not the throttle body or the sensors. What could it be?
Nice video thank you.. you didn't point out the sensor on the right side of the head , two skinny hoses connect to it and one sensor. Could u tell me what that densco sensor is? I having trouble mounting it/getting the sensor to reach the plug.. thanks
Thanks for the video brother, very informative. Would you be able to shed some light on where transmission shift control solenoids are? My engine is throwing a code Solenoid A stuck on, and Solenoid B stuck off. I have replacements, Are they easily accessible under the air box? Thanks for your time!
check engine light? its probably in limp mode, where it prevents the engine to pass 3k rpm to prevent any major damage. Whats the history of the car before this happened?
Great informative video and excellent job of keeping the engine clean and shiny, I wish my 06 Honda was that clean! I was wondering if you can make a tutorial video showing how to recharge AC refrigerant R-134A. Thanks.
best way is to use a machine, which we don't have. We don't recommend using those A/C refrigerant can's they sell at the auto store. The Proper way to recharge your A/C is by doing a complete vacuum and recharge with R-134a using a machine. We'll have to buy one in order to show you how...
Do you mean the radiator coolant reservoir? That’s where your coolant overflows stay in. I’d recommend changing it and refill the coolant to max if you can before engine overheats due to low coolant.
Hi from Peru, first of all, sorry for my english, I have a problem.....I´d like to know the name of the hose in the minute (from 5:29 to 5:44) in the video you can see a white hose and what is its function, this hose goes out of its place and despite this the car works ok, but I think that's why it consumes a lot of coolant, or maybe I'm wrong, please help. Thanks ( I put the clamp, but when I drive it goes out). I hope you understand what I am trying to say.
in the video at the time 4:54 there is a part that you touched its shiny kinda curved and with a rubbery black box at the end please what is the name of it i need that part
@@lundychacon2758 thanks a ton. I ordered an intake tube the other day but it only came with the main piece I'm gonna have to order the other pieces separately
Do you have a video on how to check fuel pressure on this 2.4 engine ? I need to check it,but my fuel pressure tester dont have a connector for this car... Im thinking I need to T it in at 3:18 in the video at that hose right above the EGR Valve...
Would you happen to know what the piece is called that the smog hose connects to? I somehow broke it off when replacing my valve cover gasket on my 2003 Honda Accord. The smog hose is the small hose next to the emissions hose on the air filter. I’m needing to know what the smog hose runs down to so that it can be replaced. Any help is greatly appreciated. Thanks in advance.
the is a hose attached the the valve cover (i think) which has a small rubber box that goes into the intake tube what is that box called look to replace that plz help asap
@nutzandbolts...Saw your video regarding what you do to clean the engine bay. Didn't realize it was that simple. The only thing going I would do different...is use Deionized Water vs water from the hose. Great videos though. Keep them coming
Question...the two nuts that hold the front plastic cover on...on the front part ....after you remove the cover...Those screws also appear to go down into the engine.....I have one missing....Will that affect my engine in any way.? It hasnt seemed to affect performance yet....i just noticed it...but theres just a hole there where the screw should be....Im concerned.
Where is the canister valve solenoid located. I have a 2005 Honda Accord ex 4 cylinder. The part number is pv597. I took the canister out but it is not located there. I could not see any part that looks like the one I got Thanks
What is the part called that is connected to the hose right after the maf sensor. It looks like it has 2 connections to the hose. One wide and one skinnier but both are on the same part.
I have an 06 someone ripped the maf sensor connector out of and I'm a bit intimidated by what I'm looking at. I can send a picture of mine, but any tips on doing so?
Have a question. My girlfriend took her accord to auto one to read the check engine e light. They said her crankcase breather hose is the cause for the alarm. They mean PCV valve and hose?
system running rich, check for vacuum leaks at, PCV valve, PCV hose, EVAP canister purge valve, throttle body, intake manifold, and the brake booster. Should be easy to find them.
Rivers Rivers just to the right of his finger at 5:31 there is a small 3” rubber hose that is extremely susceptible to cracks and breaks. Check here there as well. If you need it replaced. Go to Honda because they can find it easier and its only $8. Just replaced mine today. Also, it has a particular shape so don’t just get a random hose from anyone.
What's the black cover in front of the battery that goes to a black hose type like air intake piece? Is there supposed to a filter in that hose or no? Unsure what it's called and can't find what goes there
Question, I have a 2003 Honda Accord ex v6 sedan. When I put key in ignition lights illuminate and I hear the beeping like normal when I turn the other lights light up but when I try to start it all dies like poof. I don’t get a crank nothing just turn and dead. I changed the starter, alternator, ignition switch and just don’t know what the issue is I wasn wondering relay maybe but any experienced answers would help greatly.
What's the black plate connected to the side of the air intake hose I'm trying to replace the round part that goes on that plate its rubber and has cracked.
How do I tell which cams go where? So when you have the valve cover off, there is 1 that just had a pulley, and the other has the thing that makes it a i-vech. Which goes in the front and which 1 goes I the back?
I experience a little vibration coming from the front right side/wheel only when accelerating. No noise yet, but I can feel it through the pedals, not through the steering. Please what are the likely causes?
@nutzandbolts...I believe my throttle body is still cable also. Love the vids. You guys should do a video on a 2003-2007 Honda Accord manual transmission fluid replacement. Would you happen to know the crush washer sizes for the drain and fill on a Manual Transmission 2004 Honda Accord?
+NutzAboutBolts ok thanks im i got a oil pressure light on but everythings seems fine.. so thats why i suspected that the oil pressure sensor is busted..
its possible, but there's many factors that cause that light to come on. such as the oil screen clogging up can cause the oil pressure to not be within spec, or the oil pump. That's a little more extensive than just replacing the switch and see if it'll work. Up to you though.
I have a 2006 Accord K20Z2 with manual. The engine is running good but in warm idle the whole block is shaking a little bit. The front more than the back. At the intake manifold about 1/2 inch up and down. And it stops when it is anything over idle or cold idle. You don't notice it from the inside of the car. The front motor mount looks good. Idle is about 700 rpm. Maybe to low? Can the idle be adjusted? Or what else could it be?
I have one little trouble with the ECT sensor cooling fans working only if I keep the a/c on I replaced sensor, part wiring and new connection relay and still have same problem. but does not overheat too
I have a 2007 Honda accord and it's jerking when accelerating. I've replaced the pedal position sensor under the hood and still having the same issues, any suggestions?
@@NutzAboutBolts Thanx for the answer. Is this the only fuel filter ? I found an other filter (part. no: 16010sea000). The description says, this filter is located in the engine bay. And i found this one: 16010SDCE01; this looks like it goes to the fuel pump. The engine type of my car is K20A6.
So what do I do I had a bad motor 05 2.4 accord I then bought a 03 same motor but there is plugs that I have on 05 wiring harness that is not on 03 wiring harness.I have a cold air intake 05 motor has a plug for that a 6 pin plug the 03 does not have that plug my car starts but runs bad I put the 05 harness in the should I change it back to the 03 harness
I have a problem with hot engine hard start. When engine is cold it starts well, but when its warmed up and i turn it of, after 10-20 mins it starts hard. Its cranking and i need to add little throttle to start up.I assume that maybe fuel injectors are leaking. Is there any way that i can cut off fuel pump manually, that way i could diagnose if leaking fuel injectors are problem. I tried with removal of fuse 19 (ECU, fuel pump) but when i remove it engine stalls like it was shut off by key. So that didn't helped. I couldn't find inertia switch where is located? Hacking the inertia switch i could shut off fuel pump manually.
+Uros Galovic if no check engine light, you want to check the fuel pressure on your car, then check your fuel line if its plugged or damaged, and last will be the fuel filter if its plugged.
hello, is the 2004 Honda accord 4 cylinder engine is exchangeable with 2007 Accord edition? PS: i know that throttle body is different but i am talking about the engine without accessories.
Is it one unit I'm wondering for preventative maintenance does the gas filter clog ?and could it be changed sepretatly my car is going on 10yrs so I'm trying to do as much as preventative maintenance .
I have 06 I4 accord SE. I have P0301 CEL code. I want to replace cylinder 1 fuel injector but not sure exactly which one belongs to cylinder 1. please help.
Questions: my car is one accord 2007 automatic exl, my problem is bad fuctional, but are no where problem is! The scaner say ok.. but the problem never its gon! Change new battery, motor oil, filter, spark plug.. can you tellme what to do?? Gracias!!
Great vid! Now if you could please make Part 2, 3, 4, and 5 of this series, that would be awesome.
Nice video.
Please do a second one to identify the air/fuel ratio sensor, O2 sensors, external temperature sensor, back-up light switch, and mechanical units like the inner and outer CV joints, ball joints, tie rods, steering gearbox, vacuum lines, etc. Thanks.
That is one CLEAN engine my friend! 👍🏼
Damn that engine is better looking then fresh out of the factory
Yeah, tons of silicone. It's better to clean, than use silicone.
Awesome and great Video, from picture quality , details and clarity .
I am having a problem with my Honda Accord 06 engine and this is a good start since every mechanic is telling me a different story.
shads77 ouch, that sucks.
My car engine idle smooth when it is on N or P, but while applying the break and shift to D or P, the RPM goes under 0.5 and the engine shake/vibrate. No one can find the real reason. Any idea, the car has 170K but run really smooth except when it is idle on D or R.
shads77 any check engine light? could also be transmission mount since it only vibrates during drive... Check all your mounts to see if any is broken. If there's a check engine light, could be sensors or switches. Hard to tell without knowing whats going on and the history of the vehicle.
today engine light came out. I will check the code tomorrow and let you know.
In case it is a bad O2 sensor, will it only vibrate on Drive.
shads77 don't think o2 sensor can cause vibrations, mostly bad fuel consumptions.
Very well and clearly outlined with sharp and crisp Video footage... A 'walkaround the 2.4l VTEC motor and critical components.. Very helpful to know where these components are and how to actually recognize them! - Great for novices... Thank you.
Gratitude: Just bought a 2003 Accord and was looking to become well versed with the engine. Thank you for this. Consider me a new subscriber.
I am impressed.
I have a problem identifying a part on a 2004 Honda Accord and Napa, Carquest, Auto Zone nor O'Riley's could figure it out. But with a brief description and pitiful cell phone photos Nick was able to determine what the part was, sent me a schematic and official name for the part.
So Nick is your go to guy for Honda matters.
Excellent video! Thank you for posting it!
Nice video, I have a question. What are the small metal tubes (welded together) above the EGR valve called and can they be purchased? The smaller one that has antifreeze going through it is leaking on my 03 Accord.
Thank you for all of your videos, much appreciated throughout the years I've had my 03 Accord 200k miles still going
Nice. Mines only at 160k for now
I have a 200k mi 03 accord standard. It idles up and down all the time. Whether I'm at a stop light or even when I'm driving it jumps a little when I shift because its idling up and down while I drive. Driving or a complete stop it idles up and down. Its not the throttle body or the sensors. What could it be?
Oweezy3rdi sounds like something’s clogging the airway of the engine. Have you cleaned the throttle body or replace the engine air filter?
@@NutzAboutBolts yeah I did could it be the EGR Valve?
Oweezy3rdi it’s possible, do you have a check engine light?
What is the name of the sensor to the left of cylinder #1 fuel injector shown at 5:10?
slickerthnu hey, did you find out what’s that?
It’s a solenoid that controls the dampening of the motor mounts
Great video. How do you keep the engine looking brand new? What cleaning solvent or spray do you use?
Hi, can you tell me where the fuel regulator is located? Thanks.
I got what I needed from the video man.
That is one clean engine!!! Can you say somethings about your methods to keep it that spotless?
We just do an engine bay cleaning. We made a video for it on the Prius but it’s the same procedure.
Thank you sir. This is a little different from the 289 in my 67 Mustang, but you helped me understand it.
Nice video thank you.. you didn't point out the sensor on the right side of the head , two skinny hoses connect to it and one sensor. Could u tell me what that densco sensor is? I having trouble mounting it/getting the sensor to reach the plug.. thanks
Thanks for the video brother, very informative. Would you be able to shed some light on where transmission shift control solenoids are? My engine is throwing a code Solenoid A stuck on, and Solenoid B stuck off. I have replacements, Are they easily accessible under the air box? Thanks for your time!
My 03 Honda accord won't go pass 3k rpm any suggestions on why its doing that?
check engine light? its probably in limp mode, where it prevents the engine to pass 3k rpm to prevent any major damage. Whats the history of the car before this happened?
NutzAboutBolts yes check engine light is on.
@@carlosenciso9229 oil relay switch. Back side of engine. Located on Oil pump .
Great informative video and excellent job of keeping the engine clean and shiny, I wish my 06 Honda was that clean! I was wondering if you can make a tutorial video showing how to recharge AC refrigerant R-134A. Thanks.
best way is to use a machine, which we don't have. We don't recommend using those A/C refrigerant can's they sell at the auto store. The Proper way to recharge your A/C is by doing a complete vacuum and recharge with R-134a using a machine. We'll have to buy one in order to show you how...
NutzAboutBolts can you do a series on the 2007 Honda Accord Coupe V6 engine?
Thank you for all the info !!
Does the 2005 Honda Accord have a Breather Hose? I have a P0171 code.
Powerful and reliable engines but these 2.4's have trouble going up steep, long hills.
So true.
Yup
HOW DO YOU GET YOUR ENGINE AND EVERYTHING SO CLEAN
Watch our engine clean video, that’s how we cleaned the engine bay. :)
What is that tube at 1:06 on the left? Mine is leaking on a 2012 Accord do you know how it can be fixed?
Do you mean the radiator coolant reservoir? That’s where your coolant overflows stay in. I’d recommend changing it and refill the coolant to max if you can before engine overheats due to low coolant.
Hi from Peru, first of all, sorry for my english, I have a problem.....I´d like to know the name of the hose in the minute (from 5:29 to 5:44) in the video you can see a white hose and what is its function, this hose goes out of its place and despite this the car works ok, but I think that's why it consumes a lot of coolant, or maybe I'm wrong, please help. Thanks ( I put the clamp, but when I drive it goes out). I hope you understand what I am trying to say.
in the video at the time 4:54 there is a part that you touched its shiny kinda curved and with a rubbery black box at the end please what is the name of it i need that part
That is the same piece I need as well can't seem to find it anywhere I'm thinking I'll have to find one at the junkyard
@@jonahcottrell2879 its called BREATHING BOX
ITS BETTER TO GET THE AIR INTAKE HOSE KIT IT SHOULD COME WITH IT I FOUND MINE FOR 70.00
@@lundychacon2758 thanks a ton. I ordered an intake tube the other day but it only came with the main piece I'm gonna have to order the other pieces separately
Do you have a video on how to check fuel pressure on this 2.4 engine ? I need to check it,but my fuel pressure tester dont have a connector for this car... Im thinking I need to T it in at 3:18 in the video at that hose right above the EGR Valve...
What are the 2 hoses that are connected from throttle body to metal thing, then it goes out the back towards the headers. What hoses are they?
Where is the fuel filter located on an '05 Accord??
Its with the fuel pump assembly.
Would you happen to know what the piece is called that the smog hose connects to? I somehow broke it off when replacing my valve cover gasket on my 2003 Honda Accord. The smog hose is the small hose next to the emissions hose on the air filter. I’m needing to know what the smog hose runs down to so that it can be replaced. Any help is greatly appreciated. Thanks in advance.
Very informative, thank you!
@nutzandbolts...How in the hell do you keep your motor so damn clean? lol....I mean what is the safest...quickest way that you recommend?
we made a video on engine clean, watch it :)
Hey how do you keep the engine so clean?
Engine cleaning video 👍🏼
the is a hose attached the the valve cover (i think) which has a small rubber box that goes into the intake tube what is that box called look to replace that
plz help asap
HI, Where is the FUEL PRESSURE REGULATOR ON THIS CAR?
@nutzandbolts...Saw your video regarding what you do to clean the engine bay. Didn't realize it was that simple. The only thing going I would do different...is use Deionized Water vs water from the hose. Great videos though. Keep them coming
thanks
@nutzandbolts....great vids guys. Do you have any vids regarding axle changes on the 2003-2007 Honda Accord?
no, not as of right now.
Question...the two nuts that hold the front plastic cover on...on the front part ....after you remove the cover...Those screws also appear to go down into the engine.....I have one missing....Will that affect my engine in any way.? It hasnt seemed to affect performance yet....i just noticed it...but theres just a hole there where the screw should be....Im concerned.
It’s probably the stud for the nut, it shouldn’t be affected
@@NutzAboutBolts ok thank you
Please where is the crankcase breather located?
What's the normal gauge of end of discussion oils
Where is the canister valve solenoid located. I have a 2005 Honda Accord ex 4 cylinder. The part number is pv597. I took the canister out but it is not located there. I could not see any part that looks like the one I got Thanks
Hose coming from valve cover to some kind of valve, what its function?
where is the crankshaft position sensor circuit a?
Hey bro what’s this big plug in the front of the engine, looks like an oversized spark plug
Can you do one for the 2007 Honda V6 3.0 engine
What is the part called that is connected to the hose right after the maf sensor. It looks like it has 2 connections to the hose. One wide and one skinnier but both are on the same part.
Can you send the picture to our Facebook page, it’s hard to figure which hose you’re talking about. Thanks.
I have an 06 someone ripped the maf sensor connector out of and I'm a bit intimidated by what I'm looking at. I can send a picture of mine, but any tips on doing so?
Have a question. My girlfriend took her accord to auto one to read the check engine e light. They said her crankcase breather hose is the cause for the alarm. They mean PCV valve and hose?
its possible, but he was talking about the hose... check for leaks, whats the check engine light code?
NutzAboutBolts the engine code is P0171
system running rich, check for vacuum leaks at, PCV valve, PCV hose, EVAP canister purge valve, throttle body, intake manifold, and the brake booster. Should be easy to find them.
NutzAboutBolts will do thank you
Rivers Rivers just to the right of his finger at 5:31 there is a small 3” rubber hose that is extremely susceptible to cracks and breaks. Check here there as well. If you need it replaced. Go to Honda because they can find it easier and its only $8. Just replaced mine today. Also, it has a particular shape so don’t just get a random hose from anyone.
Where is the output speed sensor located
Why is there a inlet on the intake boot but nothing in it
Is this is a SULEV motor?? I can´t see the air temperature sensor on the intake hose...
What's the black cover in front of the battery that goes to a black hose type like air intake piece? Is there supposed to a filter in that hose or no? Unsure what it's called and can't find what goes there
Question, I have a 2003 Honda Accord ex v6 sedan. When I put key in ignition lights illuminate and I hear the beeping like normal when I turn the other lights light up but when I try to start it all dies like poof. I don’t get a crank nothing just turn and dead. I changed the starter, alternator, ignition switch and just don’t know what the issue is I wasn wondering relay maybe but any experienced answers would help greatly.
Thanks for the good video. Could you kindly tell me the location of the ground wire from the engine to the chassis?
There is 2 engine ground cables. One is on the valve cover to the engine mount by the pulleys, the other is near the intake box.
What's the black plate connected to the side of the air intake hose I'm trying to replace the round part that goes on that plate its rubber and has cracked.
J series video?
Is there like something to press to rev the engine from the hood?
Shawn Gray nope, the throttle body has a sensor on it instead of a cable.
ahh ok
Shawn Gray
np!
How do I tell which cams go where? So when you have the valve cover off, there is 1 that just had a pulley, and the other has the thing that makes it a i-vech. Which goes in the front and which 1 goes I the back?
I experience a little vibration coming from the front right side/wheel only when accelerating. No noise yet, but I can feel it through the pedals, not through the steering. Please what are the likely causes?
Where are the motor mounts located on a 2006 Honda Accord?
What type of engine is this? 4 or 6 banger?
Inline 4
That sensor on the air filter I don't have just the other sensor by the MAP sensor
IS THERE WIPER RELAY ON THIS ACCORD? WHERE IS IT?
Please help to show where to find a block heater on Honda accord 2009
Where is the FUEL PRESSURE REGULATOR located at. I have the same vehicle. And I just diagnose my car code P0172. Engine running too rich
Damn
I need to know what those two blue caps in the back are and you went right pass them 🤣
@2:52 Those are High and Low port for the AC system.
@@BLAZEPSI thank you so much... actually still didn’t know until now! You’re awesome 🤙🏾
@nutzandbolts...I believe my throttle body is still cable also. Love the vids. You guys should do a video on a 2003-2007 Honda Accord manual transmission fluid replacement. Would you happen to know the crush washer sizes for the drain and fill on a Manual Transmission 2004 Honda Accord?
yes its cable, we're not sure of the size for the manual transmission crush washer. You can buy them at the dealership, less of a guessing game lol
Where is the engine number on a 2005 Honda Accord V6 located
hey bro any idea how to adjust the headlights?
I need to know where the fuel filter is please.
its in the back seat.
Thank a lot you're the man!
Where is the fuel filter on a cl9 Accord ?
Hey I Have A Question Hope I Can Get A Reply.... My Engine Has A Sensor Rite In Front Of The Throttle Body Is That Sensor Removable???
The ect sensor you just showed me they told me at the parts store that that wasn't it
hi ive been watching your videos about your accord... i just wanna ask where is the location of the oil pressure sensor?
its on the top right of the oil filter, its like a few inches from there.
+NutzAboutBolts ok thanks im i got a oil pressure light on but everythings seems fine.. so thats why i suspected that the oil pressure sensor is busted..
its possible, but there's many factors that cause that light to come on. such as the oil screen clogging up can cause the oil pressure to not be within spec, or the oil pump. That's a little more extensive than just replacing the switch and see if it'll work. Up to you though.
+NutzAboutBolts its seems the oil pressure is ok no weird sound on the engine ang its running smoothly.. i hope that its only a busted sensor..
+NutzAboutBolts or how can i check if oil screen in clogged? thanks for your help!
Thanks for the video, i did a coment on your other video, where is 02 sensor heater circuit located (p0135 code) thanks again.
it is the air fuel ratio sensor, its the sensor right after the exhaust and before the cat.
where's the crankshaft position sensor? pc valve?
I have a 2006 Accord K20Z2 with manual.
The engine is running good but in warm idle the whole block is shaking a little bit. The front more than the back. At the intake manifold about 1/2 inch up and down. And it stops when it is anything over idle or cold idle. You don't notice it from the inside of the car.
The front motor mount looks good. Idle is about 700 rpm. Maybe to low? Can the idle be adjusted? Or what else could it be?
any check engine light? I think idle is 750 +/-50 from the top of my head depending if its a/t or m/t, don't quote me on it. lol.
Got a p0303 code on an 05 accord already changed sparks and still misfiring any ideas? Thanks in advance
I have one little trouble with the ECT sensor cooling fans working only if I keep the a/c on I replaced sensor, part wiring and new connection relay and still have same problem. but does not overheat too
I'm having this same problem
What is the anatomy inside the engine itself???
Can I put my 2006 throttle body on the 03-05 engine? Does that fit?
I don’t think you can since the 03-05 were throttle cables.
@@NutzAboutBolts Mine accord is 2006, and trying to see if a 03-05 engine could swap in my 06, and use my 06 throttle body.
Hong I would do more research as I know both engines layout is different since they did some modification for the 06 compare to the 05 and below.
I have a 2007 Honda accord and it's jerking when accelerating. I've replaced the pedal position sensor under the hood and still having the same issues, any suggestions?
Hi. Very good video. Can you show where the fuel filter is located on a 2004 Honda Accord (european model) ? Thanx a lot :-)
It’s in the fuel tank, with the fuel pump.
@@NutzAboutBolts Thanx for the answer. Is this the only fuel filter ? I found an other filter (part. no: 16010sea000). The description says, this filter is located in the engine bay. And i found this one: 16010SDCE01; this looks like it goes to the fuel pump. The engine type of my car is K20A6.
Daniel Tahin that might be the transmission external filter... that’s the only filter I saw in the engine bay.
Hi, I just dropped a 07 motor in my 03 Accord. Blew timing chain. Any advice to help avoid this problem again in te future. Maintence tips, etc.
also, Would a Cold air intake be a wise investment.
Blown timing chain.. wow must have missed oil changes or run on low oil..
Hey brother thanks I was looking for my engine coolant temperature sensor and idle valve might need a little more help with idle valve
So what do I do I had a bad motor 05 2.4 accord I then bought a 03 same motor but there is plugs that I have on 05 wiring harness that is not on 03 wiring harness.I have a cold air intake 05 motor has a plug for that a 6 pin plug the 03 does not have that plug my car starts but runs bad I put the 05 harness in the should I change it back to the 03 harness
Wat is tha part after tha MAF sensor? On the intake hose
I'd like to know this aswell
where can i find the fuel pressure regulator?
its inside the fuel tank. You will have to remove the fuel pump unit in the back seat. Once you remove it, its with the fuel pump unit.
thanks man! quick question i have p0171 code have any advice?
the fuel system is running rich. You want to check your fuel pressure regulator, valve adjustments, and fuel injectors if its leaking.
NutzAboutBolts ok thank you im going to try all that.
I hope it works.
good information I was looking for the fuel pressure regulator myself..... thanks
I have a problem with hot engine hard start. When engine is cold it starts well, but when its warmed up and i turn it of, after 10-20 mins it starts hard. Its cranking and i need to add little throttle to start up.I assume that maybe fuel injectors are leaking. Is there any way that i can cut off fuel pump manually, that way i could diagnose if leaking fuel injectors are problem. I tried with removal of fuse 19 (ECU, fuel pump) but when i remove it engine stalls like it was shut off by key. So that didn't helped. I couldn't find inertia switch where is located? Hacking the inertia switch i could shut off fuel pump manually.
+Uros Galovic do you have any check engine lights?
+Uros Galovic if no check engine light, you want to check the fuel pressure on your car, then check your fuel line if its plugged or damaged, and last will be the fuel filter if its plugged.
Distributor?
This uses COIL ON PLUG design..it doesn't use Distributor anymore.
Where is the vacuum lines ?
hello, is the 2004 Honda accord 4 cylinder engine is exchangeable with 2007 Accord edition?
PS: i know that throttle body is different but i am talking about the engine without accessories.
Where is the motor grounded on that Honda
We're is the gas filter located?
Ok thanks
You mean the fuel filter? There’s one inside the fuel tank, you only replace it if the fuel pump is bad.
Is it one unit I'm wondering for preventative maintenance does the gas filter clog ?and could it be changed sepretatly my car is going on 10yrs so I'm trying to do as much as preventative maintenance .
You don’t need to change it as a preventive maintenance. You only change it when your fuel pump goes bad.
Thanks
So I have 2008 Honda Accord v6 3.5 would the camshaft position sensor would be somewhat in The same place ?
I have 06 I4 accord SE. I have P0301 CEL code. I want to replace cylinder 1 fuel injector but not sure exactly which one belongs to cylinder 1. please help.
Questions: my car is one accord 2007 automatic exl, my problem is bad fuctional, but are no where problem is! The scaner say ok.. but the problem never its gon! Change new battery, motor oil, filter, spark plug.. can you tellme what to do?? Gracias!!
my 2005 honda accord ex 2.4 still has a throttle cable not electronic like yours why is that?
'03-'05 models were still pre-electronic-throttle