I was a vinyl floor installer for 37 years. We used a leather tool to put a groove on the back of rubber base so it would bend easily around corners. Might be able to use it for tires too.
@@prof2bobajob.klonded5 Yes re cutting has been around for some time BUT only for tires that were made from the factory to be recut such as tractor tires or off road tires etc. You cant just go and do this to any tire you want.
Это летние шины, а в процессе эксплуатации вылезет металлоконструкций и станут они... зимними. В зиму переобуваться не нужно. Учись "студент" у "мастера".
If this is for artistic purposes then I'm very impressed. The detail is outstanding. If this is for profitable purposes then I am disgusted. The tyre hadn't worn evenly and will never sit flat on the road again. Very dangerous in wet conditions.
@@chickenpopper its most likely for profit. Safety isn't a thing for a lot of parts of the world. Reusing, fixing, and modifying stuff even at the cost of safety is the norm. Most of the time they're just making the ends meet and both parties are well aware of it
@@yunan9610 Thank you for the insight. It's a shame that safety isn't number one priority in many places. I just hope that the person who buys that deceptively good recut is aware of what they're spending their money on!
So there is a special kind of tires that are manufactured to be regroowed after some time (for example cargo truck tires), and with theese its ok to do it. But the tire from the video looks like just regular non-regroowable tire. And it is unsymetricaly worn down. Therefore you should not perform regrowing on this tire if you are ever goin to put it back on a car
As someone in this trade I can say great job especially for not using an electric groover , manually that's a lot of work! And for anyone wondering if it's safe the manufacturer will tell you on the tyres if it's recommended or not !
Taking banana peel tires to a whole new level. Just not enough rubber to be safe. It definitely does make the tire better to be able to thread water, snow providing better traction but at the end of the day i would not want my family driving with tires like that.
A green tire before cooked is almost 1 inch thick ...after it's cooked around 3/4 or .750 the ome grooves are only .300 less than 3/8 which is a 1/3 low speed would be ok but high speed would scare me
This was cool, I was checking out guys taking hoosier race tires and grooving them for rain so they had a race set for wet. Pretty slick watching this, nice work.
Se ti puzza la vita!!! Poi scoppiano, la mescola non è corretta ed era consumato storto, quindi intagliato è ancora più storto!!!per gli indiani va benissimo ⚰️⚰️😤😤
I would rather see these used tire casings be rethreaded at a tire manufacturing plant, with a vulcanisation process bead replacement than using these thinned out grooves at high speeds. That's why I'm insisting that tire manufacturers get ahold of these old tires, inspect them, and rethread them the conventional way, just like truck tires. Techno -pneus in Rimouski QC. does this process, and Bridgestone in Joliette QC. could do it too, given that they build an extension on the existant plant. They already have the trackage that leads to the plant, so old tires could be sent by train gondola wagons to the plant to be rethreaded. It would save millions on the basic materials, and give stakeholders and shareholders higher R.O.I.s.
On the interwebz: Offering a set of tires, cheap, almost new, light usage, perfect shape, price negotiable, DOT negotiable as well, will meet only at night at a parking spot of your choice.
hey, what kind of razor blade is that? the one that i tried to bend are extremely brittle... they brake as soon as i bend them even after applying heat as you show it,
Boa noite nunca vi um frisados de pneu assim trabalhei com pneus frizados e vulcanizados o frizador tinha uma lâmina na ponta e resistência ligava na energia esquentava aí amolava a lâmina e frizava o pneu ano d 89 há 94 tempo bom vendia muito p usado
Вопрос: смотрю вы таким восстановлением занимаетесь на постоянной основе, были ли у вас случаи, когда покрышку разрывало на ходу? были ли случаи претензий от клиентов?
@@domecon9678 посмотрите канал автопорт, который показывает как треть страны ездит на старых, ржавых и полуразвалившихся ведрах, то восстановленные покрышки вам покажутся сущей мелочью. Все эти домыслы, что восстановление несет угрозу, не подкреплены ничем. Просто домыслы и страхи. Ничего не случится, если не резать протектор глубоко и без фанатизма, всего на 1-3мм. Люди ездят на куда более ужасной резине и все норм. Ну запихай в эту шину камеру, если уж ты боишься. С ней уж точно ничего не приключится.
Amigo le recomiendo usar neumáticos que solo le dibujen 1 costado y a los que les falta en medio, o ambas cosas. Nunca uno que no tenga el dibujo original.
... молодец парень!-, дай бог тебе здоровья и благополучия, новых творческих успехов и хорошего настроения, отличный получился у тебя резак для нарезки рисунка протектора покрышки, не применяя электричество 📏🛠️⚙️🔗📎🦾🗜️👍👍👍🆗👌🇷🇺👈🤝🤗🤭🤓♨️!!!
@@tyre he can't, he's from pedorosia, they consider every one should know their (how they call it -" tongue "), they don't call their language - language, they call it tongue. And absolutely sure, that every one should know it 🤣
@@Woon_Shen_Hang а почему собственно? там запаса резины еще хватает с лихвой. Тем более новые канавки не такие глубокие. Учитывая на каких покрышках люди ездят, эти еще в отличном состоянии. А учитывая нынешние цены на резину, народу есть вариант сэкономить денег хоть на один-два сезона
dude thats a cool video that would buy someone a little time in a pinch alot of people commenting do not understand good idea with handle looks like a modified wrench
Mano já vi cara bom em riscar mas esse aí é fantástico eu aqui me matando com um com resistencia e ele além de fazer seu próprio riscador ainda risca dando aula parabéns migão
Kayak gini banyak di indonesia.ini bukan inovatif.inovatif suatu benda yang sedia ada di upgrade kepada suatu yang lebih baik.ini membunuh manusia bang.komen elo kayak seorang yang bego!
Artistico tu trabajo pero en mi pais el neumatico redibujado esta prohidido....ya tienen mucho kilometraje al menos un tubular puede fallar en alguna curva y causar algun accidente
A phenomenon without a doubt. The pity is that it is very dangerous without an internal backup camera that they surely put in as I saw on other occasions. Still, necessity sharpens ingenuity❤
Just fine for around the city... People are worried about balancing and all of that, in the city it is fine, probably even up to 60-80km and hour. It's high speeds on the highway that would matter, if at all. And you dont want to speed regardless. Realistically it should be just fine with some experience and being safety conscious. You can use a dremel tool and get more life out of a dirtbike tire this way too.
Esto que estas haciendo es una irresponsabilidad !!esa cubierta esta muerta y por mas que la marques ya perdio su aderencia seguramente a la persona que se la vendas le estas dando un boleto seguro hacia la muerte!!!
Error!!! Informate un poco y comprobarás que hay neumaticos regrabables, normalmente neumaticos de camiones y furgones de carga de hecho en el mismo neumatico pone "regrobable" o algo asi ponen
This tyre is not meant to be rethreable, it has the markers where the rethreading tool stucks/stops to show its level with the min tire thread of 1.6mm, means end of life for this tyre, put it on a vehilce will endanger lives....
I was a vinyl floor installer for 37 years. We used a leather tool to put a groove on the back of rubber base so it would bend easily around corners. Might be able to use it for tires too.
No, thank you, risk of explosion of a worn tire :)
Gracia el intrumento haser la trilla cual es formula como se fabrica cortador trilla
Donde se consigue y como lo fabrico
Nothing wrong here recut has been about for years ,I bet you like 25 year old and no nthing
Wow, talk about KNOWING nothing…
@@prof2bobajob.klonded5 Yes re cutting has been around for some time BUT only for tires that were made from the factory to be recut such as tractor tires or off road tires etc. You cant just go and do this to any tire you want.
Лучше пешком ходить, чем на этих шинах ездить! Жизнь дороже!
Это летние шины, а в процессе эксплуатации вылезет металлоконструкций и станут они... зимними. В зиму переобуваться не нужно. Учись "студент" у "мастера".
Какая разница по аулу ездить 30-40 км/ч
@@СергейЧерешнев-н7мтак точно семпай
The tire is junk. It may look good but is very unsafe.
So illegal, but at the same time so satisfying!
If this is for artistic purposes then I'm very impressed. The detail is outstanding.
If this is for profitable purposes then I am disgusted. The tyre hadn't worn evenly and will never sit flat on the road again. Very dangerous in wet conditions.
@@chickenpopper its most likely for profit. Safety isn't a thing for a lot of parts of the world. Reusing, fixing, and modifying stuff even at the cost of safety is the norm. Most of the time they're just making the ends meet and both parties are well aware of it
@@yunan9610 Thank you for the insight. It's a shame that safety isn't number one priority in many places. I just hope that the person who buys that deceptively good recut is aware of what they're spending their money on!
@@chickenpopper Украина двигается на таких колёсах
@@chickenpopper Украина двигается на таких колёсах
So there is a special kind of tires that are manufactured to be regroowed after some time (for example cargo truck tires), and with theese its ok to do it. But the tire from the video looks like just regular non-regroowable tire. And it is unsymetricaly worn down. Therefore you should not perform regrowing on this tire if you are ever goin to put it back on a car
приведите хоть один пример, чтобы после такого восстановления покрышку разорвало или было место дорожно-транспортное происшествие
@@ВтораяЖизнь-э5ж didnt said anything about that. i just said the tire from the video sucks and isnt meant to be regroowed. thats all
You mean Simi tires... are retread not regrove
@@Raidersforlife229 isnt that the same thing?
@@ВтораяЖизнь-э5жare you serious this is dodgy as hell and it is dangerous
Wow bnew again amazing how to shorten your life
As someone in this trade I can say great job especially for not using an electric groover , manually that's a lot of work! And for anyone wondering if it's safe the manufacturer will tell you on the tyres if it's recommended or not !
Great video, on exactly how NOT to regroove tires.
А, как правильно?
...it's for entertainment purposes 😆 ASMR?
New fear unlocked tnx
Taking banana peel tires to a whole new level. Just not enough rubber to be safe. It definitely does make the tire better to be able to thread water, snow providing better traction but at the end of the day i would not want my family driving with tires like that.
A green tire before cooked is almost 1 inch thick ...after it's cooked around 3/4 or .750 the ome grooves are only .300 less than 3/8 which is a 1/3 low speed would be ok but high speed would scare me
final destination
Chronicles of an anounced death (its a spanish book).
This was cool, I was checking out guys taking hoosier race tires and grooving them for rain so they had a race set for wet. Pretty slick watching this, nice work.
Ficou ótimo, dá pra viajar tranquilamente, sem problemas, sentido as alturas eternas
Se ti puzza la vita!!! Poi scoppiano, la mescola non è corretta ed era consumato storto, quindi intagliato è ancora più storto!!!per gli indiani va benissimo ⚰️⚰️😤😤
Embora seja extremamente perigoso e proibido usar um pneu "reaberto",o serviço realizado por esse rapaz e satisfatório de ver!😃
We dont use it as a car tire. But yes for a carts maybe
Is this where Walmart gets their tires from ?
😂
I would rather see these used tire casings be rethreaded at a tire manufacturing plant, with a vulcanisation process bead replacement than using these thinned out grooves at high speeds. That's why I'm insisting that tire manufacturers get ahold of these old tires, inspect them, and rethread them the conventional way, just like truck tires. Techno -pneus in Rimouski QC. does this process, and Bridgestone in Joliette QC. could do it too, given that they build an extension on the existant plant. They already have the trackage that leads to the plant, so old tires could be sent by train gondola wagons to the plant to be rethreaded. It would save millions on the basic materials, and give stakeholders and shareholders higher R.O.I.s.
Отличная инструкция для реинкарнации шин, вот бы ещё показал как нанести индикаторные цифры износа протектора ?!😅
But this is wrong...denger
can you explain , which way is wrong ?
@@zygmaszel8882 the tire is way too thin
@@Oxyc very truth , but idea counts
@@zygmaszel8882 only for heavy tracks
SAAN PO MAKAKABILI NIYANG GAMIT NA PANG REGROOVE
*Новое - ЕСТЬ новое !*
цыгане новое не покупают
Mine usually weather check long before the wear out.
On the interwebz: Offering a set of tires, cheap, almost new, light usage, perfect shape, price negotiable, DOT negotiable as well, will meet only at night at a parking spot of your choice.
Does anyone know the name of the tool which is used here to trim?
На таких шинах Бог без очереди принимает
hey, what kind of razor blade is that? the one that i tried to bend are extremely brittle... they brake as soon as i bend them even after applying heat as you show it,
Try Tatra or Tiger brand
Keahlian seperti ini akan sangat berguna di negara yang kena embargo seperti Korea Utara.
Pronto pra levar um pro céu. Boa viagem!
Boa noite nunca vi um frisados de pneu assim trabalhei com pneus frizados e vulcanizados o frizador tinha uma lâmina na ponta e resistência ligava na energia esquentava aí amolava a lâmina e frizava o pneu ano d 89 há 94 tempo bom vendia muito p usado
Tinha que da cadeia
Perfect in the third 🌎 around town or on a little 🏝 when U can't find a replacement, don't have money & never exceed 25mph.
Вопрос: смотрю вы таким восстановлением занимаетесь на постоянной основе, были ли у вас случаи, когда покрышку разрывало на ходу? были ли случаи претензий от клиентов?
Мёртвые не выдвинут притензий я пологаю
@@domecon9678 посмотрите канал автопорт, который показывает как треть страны ездит на старых, ржавых и полуразвалившихся ведрах, то восстановленные покрышки вам покажутся сущей мелочью.
Все эти домыслы, что восстановление несет угрозу, не подкреплены ничем. Просто домыслы и страхи.
Ничего не случится, если не резать протектор глубоко и без фанатизма, всего на 1-3мм. Люди ездят на куда более ужасной резине и все норм. Ну запихай в эту шину камеру, если уж ты боишься. С ней уж точно ничего не приключится.
Не пойму прикола, ведь резина стёрта смысл во всех этих действия раз толщина резины стерта
@@ВтораяЖизнь-э5ж я правильно понимаю,если заглубиться на 1-1.5мм чуток это вообще безопасно на 99%,без гарантий разумеется,чисто теор?
Amigo le recomiendo usar neumáticos que solo le dibujen 1 costado y a los que les falta en medio, o ambas cosas. Nunca uno que no tenga el dibujo original.
Good enough for the slow speeds they travel.
... молодец парень!-, дай бог тебе здоровья и благополучия, новых творческих успехов и хорошего настроения, отличный получился у тебя резак для нарезки рисунка протектора покрышки, не применяя электричество 📏🛠️⚙️🔗📎🦾🗜️👍👍👍🆗👌🇷🇺👈🤝🤗🤭🤓♨️!!!
@@tyre he writes that it is enough to get to the cemetery
@@tyre he can't, he's from pedorosia, they consider every one should know their (how they call it -" tongue "), they don't call their language - language, they call it tongue. And absolutely sure, that every one should know it 🤣
Нельзя на таких покрышках уже ездить.
@@Woon_Shen_Hang а почему собственно? там запаса резины еще хватает с лихвой. Тем более новые канавки не такие глубокие. Учитывая на каких покрышках люди ездят, эти еще в отличном состоянии. А учитывая нынешние цены на резину, народу есть вариант сэкономить денег хоть на один-два сезона
@@ВтораяЖизнь-э5ж у вас уже одна жизнь прошла. Не спешите жить катаясь на таких покрышках:))
Молодец. я тоже когда то так подрабатывал на шиномонтаже.
Thankyou, Sir
The art of life on the road
Hmmh!...what about the thickness??..wouldn't exploded if loaded with weight??
Where can I get a tool like this I have tried to make one but no luck
Where you from?
You get it at the "Closer to God " store.
@@bills6093😂😂😂
Isn't it dangerous if the tires become thin?
Si !!!!
Super ek number
Thankyou
dude thats a cool video that would buy someone a little time in a pinch alot of people commenting do not understand good idea with handle looks like a modified wrench
Thankyou, Sir
No to jeszcze wyplakować i będzie nówka sztuka
Mano já vi cara bom em riscar mas esse aí é fantástico eu aqui me matando com um com resistencia e ele além de fazer seu próprio riscador ainda risca dando aula parabéns migão
Tu acha melhor fazer com lâmina de estilete? Tô pensando em não fazer com resistência..
Maluco se garante. Mas se vai pegar estrada, melhor comprar um novo. Na cidade ainda vai.
How do you know how deep to cut so you don't cut metal belts?
It will be easy if you have done it often 👌🏻
@@tyre so how many mm usually can be cut?
I thinks 5 mm (max) we can cut
@@tyre that is quiet a lot!
we have a more sophisticatec tire regroover the latest
where can i buy something like this?
Probably India
What kind of tread depth are you getting here?
It doesn’t matter because we will not use this for driving. But its okay for a cart
Ну всё, теперь можно и в АВИТО дать объявление, продам летние шины б/у один сезон. Недорого. 😂😂😂😂
Inovatif yamg sangat berguna, menghasilkan mas Bro..👍❤️
Came see and learn..👍❤️
Kayak gini banyak di indonesia.ini bukan inovatif.inovatif suatu benda yang sedia ada di upgrade kepada suatu yang lebih baik.ini membunuh manusia bang.komen elo kayak seorang yang bego!
Artistico tu trabajo pero en mi pais el neumatico redibujado esta prohidido....ya tienen mucho kilometraje al menos un tubular puede fallar en alguna curva y causar algun accidente
The tire is still bald, but now it’s bald with style.
Yeh saman kaha milega???
Если в гараже заняться не чем то можно посидеть и расслабится вырезанием по резине ))
what do you use as a blade?
Razor blade
Do some riding lawnmower tires love your videos 👍
Mau tnya itu buat alt ukir ny dari bahan apa
No special materials. You can make it from any iron, as long as it's strong and comfortable to hold.
very creative
🙏🏻
Esse tipo de trabalho só serve para áreas rurais para colocar em carretas, velocidade máxima 50 km.
A phenomenon without a doubt. The pity is that it is very dangerous without an internal backup camera that they surely put in as I saw on other occasions. Still, necessity sharpens ingenuity❤
Just fine for around the city... People are worried about balancing and all of that, in the city it is fine, probably even up to 60-80km and hour. It's high speeds on the highway that would matter, if at all. And you dont want to speed regardless. Realistically it should be just fine with some experience and being safety conscious. You can use a dremel tool and get more life out of a dirtbike tire this way too.
Esto que estas haciendo es una irresponsabilidad !!esa cubierta esta muerta y por mas que la marques ya perdio su aderencia seguramente a la persona que se la vendas le estas dando un boleto seguro hacia la muerte!!!
Error!!! Informate un poco y comprobarás que hay neumaticos regrabables, normalmente neumaticos de camiones y furgones de carga de hecho en el mismo neumatico pone "regrobable" o algo asi ponen
@@delasierra1000 Si, pero este no lo es.
Te falto poner los pelillos que traen las llantas de fabrica....
Ficou top. . Eu compraria kkkk
This tyre is not meant to be rethreable, it has the markers where the rethreading tool stucks/stops to show its level with the min tire thread of 1.6mm, means end of life for this tyre, put it on a vehilce will endanger lives....
RIP in advance who buy this..😓
Gagang dan ujung nya pake alat apaan tu bos.. Saya pengen but yang sepertii ini
Just watch my another video my bro
ЧТОБ ТЫ НА ЭТИХ ШИНАХ ВОЗИЛ СВОЮ СЕМЬЮ !!!ВСЮ СВОЮ НЕ ДОЛГУЮ ЖИЗНЬ!!!
Mirip ban original mantab
🙌🏻🙌🏻
Es una buena salida de emergencia para apuros en viajes donde no consigues cubiertas
Segurança heim?!
Мишлен нервно курит в сторонке! ))))
How to buy this tool?
Homemade tools sir
Fantastic.
I found how to DIY this tool.
ruclips.net/video/j9caNeMkxi4/видео.htmlsi=CNB5moz3spqlA8l5
Recommented.
Thanks you.
Kindly tell the tool name in which you inserted a blade
Among the rings
what is that tool
Homemade tool bro
Где купить такой инструмент ?
This is homemade tools bro
00:50 Мои лезвия ломаются, вне зависимости от степени нагревания. Видно качество и эластичность металла зависит от фирмы производителя лезвий.
MAS ISTO NÃO É PERIGOSO, JÁ QUE A PAREDE DO PNEU FICA MAIS FINA DEPOIS DE CARECA?
Claro, é golpe na polícia ou futuro comprador. É risco para ele (dono) e quem estiver ao lado... curvas, chuva, calor... só B.O.!!!
Nice
🙌🏻
Great recycling. Helping the planet.
Como fábricaste esa agarradera
👍👍👍
🙌
Those tires are maypops, air touching air
Melhor serviço de reabertura que já vi! Parabéns!👏👏👏👏👏
Thank you, sir
BOSS BAKA NAMAN PWEDENG MALAMAN KONG SAAN PO MAKABILI NG GAMIT MO PANG REGROOVE THANKS
Homemade tools
I guess tire alignment doesn't count in some countries.
👌🏻👌🏻👌🏻
( mute music ) but dude's an artist
Very good skill but no safety on the road.
Круто!👍🚔
I had bought 2 tires like these and 1 blew 5 days ago on the highway…. But i bought it from my locals
It's a good job but not better for security the tyre is more thin than the needed normalization.
Dont use as a car tire. But its okay for a carts, sir
Cara ficou muito bom
I don't know why. When the guys see 👀 the tyres are finished, they like to say woooohhh😮 gives me a headache 😑
Good for drives inside city.
no
This is really depressing, please use your own tires plz i really wanna see that
Quanto custa?
O frete é grátis?
For the tool?
溝を彫ってもバーストする可能性が大きいです。
危険ですね…
Read the description thankyou
Bárbaro! Pero cuál es la solución? Si el desgaste ya está. Repasandole el dibujo no haces otra cosa. Que debilitar el neumatico...
Можно продавать по цене новой)))) никто не заметит 🤣🤣🤦♂️
0% treadwear left tire to a 10% treadwear tire. Take your life into your own hands
Pls this tool details
There is in my other video sir
Ujar kaha milega
a teraz spokojnie możesz ją wyrzucić do kosza
Yes, of course, Sir