These guys are pros. They make it look easier than it is. I’ve done two ATV’s. Doesn’t quite go as smooth as they portray in the video. Product IS as good as they say it is. I’ve had the stuff on my truck for 7 years now and it looks as good as the day I put it on.
this stuff went way up. Used to get a roll for 60 bucks but now they added ATV in front of the roll name and are asking 250-300. Guess Im restoring the plastic on my two.
Hey, Chris. There is a link at the bottom of our homepage (which can be found in the video info) in the middle section under Product Information entitled "Find an Installer."
I noticed that you installed the vinyl OVER the access screws, that are used for fastening the fender to the flaring......how exactly are they trimmed to allow the screws to be taken out? Great video, thank.
Just spent the entire day installing and very dis-appointed with results. Watched video several times and own a heat gun. Contour area's came out with lots of wrinkles. Re-positioning creates bunching on the edges once the backing is removed. Not good outcome based on cost and time spent.
Brandon, the vinyl of the camo kit will absolutely cover your scratches, but also will conform the body as is, so you may feel ridges. If you want a smooth feel fill in the scratches first, but it is not necessary. Post on picture on Mossy Oak Graphics facebook - we'd love to set it when you are done.
I have this camoflauge kit ordered for my atv but I am wondering about scratches in my plastics? Will the kit go on fine over them or do you recommend sanding or body filler? Thanks
I'm trying to camo up a 1985 250es Big Red three wheeler. The only large area is the fenders. The front fender is like 12in by 20in. Not sure about the rear fenders but I feel like if I bought the 4' by 10' that it would be too much extra skin that I would have no use for. So if I by a few 48" pieces for $10 a piece can I over lap them to make one large piece to cover my rear plastics? Or will they not stick together?
So im going to order this, but I dont want to install myself.is there anyone I can get to do this install? Will my honda dealer do this or a boke place? Or is this strictly do it you s3lf kind of thing?
Im glad you basically showed the atv when it was done so people could see the finished result basically.
You can tell a pro when you see it. Superb work!
These guys are pros. They make it look easier than it is. I’ve done two ATV’s. Doesn’t quite go as smooth as they portray in the video. Product IS as good as they say it is. I’ve had the stuff on my truck for 7 years now and it looks as good as the day I put it on.
You can lap pieces. You can disguise the seam by cutting the edge in a wave pattern.
this stuff went way up. Used to get a roll for 60 bucks but now they added ATV in front of the roll name and are asking 250-300. Guess Im restoring the plastic on my two.
Hey, Chris. There is a link at the bottom of our homepage (which can be found in the video info) in the middle section under Product Information entitled "Find an Installer."
I noticed that you installed the vinyl OVER the access screws, that are used for fastening the fender to the flaring......how exactly are they trimmed to allow the screws to be taken out? Great video, thank.
Just spent the entire day installing and very dis-appointed with results. Watched video several times and own a heat gun. Contour area's came out with lots of wrinkles. Re-positioning creates bunching on the edges once the backing is removed. Not good outcome based on cost and time spent.
Brandon, the vinyl of the camo kit will absolutely cover your scratches, but also will conform the body as is, so you may feel ridges. If you want a smooth feel fill in the scratches first, but it is not necessary. Post on picture on Mossy Oak Graphics facebook - we'd love to set it when you are done.
I think that's more patients then what I have
I will try that on my 1992 Yamaha bigbear 350 .. its a small atv but I love it ..
thats how camo color is done ? or its just sticker i wanted to know how real camo is made
I think a Polaris Scrambler would look great in Mossy Oak Graphics.
What's the typical cost of the kit? Thanks!
Basically it looks great .... basically.
How long does it last from sun fade?
nice vid guys. very descriptive. i love it. good job.
I have this camoflauge kit ordered for my atv but I am wondering about scratches in my plastics? Will the kit go on fine over them or do you recommend sanding or body filler? Thanks
Is it recommended to sand the plastics before applying a wrap or is cleaning good enough?
Basically I think this basically shows how to say the word basically about 500 times in basically 9 minutes!
I'm trying to camo up a 1985 250es Big Red three wheeler. The only large area is the fenders. The front fender is like 12in by 20in. Not sure about the rear fenders but I feel like if I bought the 4' by 10' that it would be too much extra skin that I would have no use for. So if I by a few 48" pieces for $10 a piece can I over lap them to make one large piece to cover my rear plastics? Or will they not stick together?
I got a Polaris 800 and its a big machine will one kit do the job.
Any vinyl you use a heat gun
eh, basically.
So im going to order this, but I dont want to install myself.is there anyone I can get to do this install? Will my honda dealer do this or a boke place? Or is this strictly do it you s3lf kind of thing?
What pattern is that?
i need this done on my yahmha grizzly 700 2010
Camo on ATV's that are sold are most likely hydro dipped.
Thanks arcticzlusa we appreciate it
it would be better if they were cut out for every panel would be a lot easier pules no wast dont like the idea one camo fits all quads
stephen young no shit i bought this and it wasn't even close to my bike not enough for the tank or handle bar pod what a waste
If only there was a one syllable term for an ATV - like bike - that points out the QUADrupilicity of it's wheels...
ty good video
Basically word 4000 times
Basically, I feel its fine lol. Killer graphics.
Basically, he likes to cover all the basics.
wont last long, it will peel back of those fenders quickly. You improperly installed it there.
Our ATV kits are 199.95 and are available at our website in the video description.
We do any vehicle, boats, trucks anything you want cammo! we can install!
Face book WHIPLASH MEDIA!...for info
Keeps calling it a bike 😂
It is?? You go to any dealership they say the same thing 90%of youtubers call their quads or wheelers or ATVs bikes wich is another name.
You must be a city slicker
looks like a pain in the @ss
Isn't that bad if you take the fenders off. Trying to do them on the bike like that is a PITA
It's pink and it doesn't look good
Less is more, Yeah. . . Less talk mate.
im a boy I got burn by a atv exaust
Basically
Did my gun in this look me up. bradbenjaminadams1
Looks complicated as shit