Can you or are you willing to do some remote tuning on these cars? Picked up a turbo rsx k24 last month with gt35 Swapping a xona 6266 on it then need some tuning. Im in Niagara falls Canada and not sure who around here is good for tuning these. Came from audi so these are new to me. Great video btw
My EM2 is sitting on a RSX Type-S suspension, brakes, and EP3 Type-R wheels. I've got a DC5R subframe, DC5R control arms and hubs with buddy club roll centers. Hasport motor mounts for the EM2. (All from a parts car.) I know what other parts I need to do the k-swap. I just don't know what engine and trans to buy... I want a N/A, all-street DD, that can spank when it's stock and even more once it's built. K20A2 and 6 speed no LSD or K20A Type-R 6 speed with LSD or JDM K24A and maybe a 2012 SI trans???? What do?? I keep falling back to the Type-R, cause, I can run the ECU, trans, and motor stock until I'm ready to dump a ton more money into it.
The easiest swap to swap and leave stock is engine and trans from 02-04 rsx or dcr5, but the motor power would come from a k24 but if you already have a full k20 swap you can build a k24 block on the side and swap it in later, if you want help I do this stuff on a regular basis, and I use innovative mounts I like them better and hasport does NOT make a front mount but innovative does
Pirate Garage I had that thought too - K20 and building a k24 on the side. I like that advice. I’ll likely end up with a Type-S swap and have money leftover for a KPro and the other knickknacks I need for the swap. I did the full bushing kit from Hardrace, and the SHG steering rack slider. BC coil overs. Holy shit, it feels like a race car. Been stock for 12 years in this EM2. It’s time to build. I’m located in Cincinnati. Where’s your workshop?
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Dope setup seen him last night in Mexico thing scoots
Keep up the good work i really injoy your videos
Nice video , keep pushing and building we look forward to more content
question, did you need to move the ac lines out the way? did you delete them or relocate ?
It's crazy what you get your hands on.. crazy builds bro..
I like to build fast cars and most people are sheep following other buildings but bigger isn't always better
Great shifting
that has to be sarcasm
he's doing pulls then putting it in neutral
he's straight up dumping the clutch from idle to a rolling 3rd gear pull
not rev matching at all
What turbo manifold are you running?
Mustang didn't want it, Keep DIYing Honda For Life, Work on Traction Spinning Ain't winning Respect the Effort You All be Safe 🙏😈👍🏼
How tf ya fit that 6262 in the back if the Rsx lol
Nice job bro
Nice set up. What air to water intercooler is that?
Thanks!
Honda’s with laptop are the best! 😂😎
JUST NOTICED YOUR FROM AROUND CHULA JUANA!
Would love to get some work done by you when i go boost !
Awesome content bro
Msg me on Instagram gravy_built
Hey Red where do you get those water to air intercoolers from?
What top mount manifold is that? And on yours?
Its custom made out of schedule 10 like a log but a little longer
Why do so many honda guy road tune not dyno tune
How maybe gallons of fluid for the water to set setup? Thanks
I think like 3/4
Pirate Garage setup looks awesome. Simple, clean. Those are the best. Any issues with heat soaking?
No it works perfect, and 27 is the duty cycle on the boost solinoid
Pirate Garage awesome thanks
Header???
Can you or are you willing to do some remote tuning on these cars?
Picked up a turbo rsx k24 last month with gt35
Swapping a xona 6266 on it then need some tuning.
Im in Niagara falls Canada and not sure who around here is good for tuning these.
Came from audi so these are new to me.
Great video btw
Tuning by nick, lavigne motorsports, splitfire performance, all in southern ontario
So it’s a Frankenstein k20/k24 Setup? Fully stock
Just head studs and a cometic head gasket
Waste gate size??
Where you located ?
Southern California
What were the iat's with that water to air intercooler?
Like 10-20 over ambient
@@PirateGarage wow that is really good
Part number and brand?
@@cruzy251988 of what?
Water to air intercooler that is what is being talked about
Nice bro! Water to air cool! Do u have any issue with heat soak?
Not at all that's why I went with this setup it more efficient than air-to-air
Are you running a stock computer or is the computer been changed out?
Kpro
What kind of turbo manifold? Log cast iron?
Log style from stainless schedule 10 it was custom built
Where are u guys located?
San Diego
I think I know who the owner is recognized the dream chasers sticker also from SD
My EM2 is sitting on a RSX Type-S suspension, brakes, and EP3 Type-R wheels.
I've got a DC5R subframe, DC5R control arms and hubs with buddy club roll centers. Hasport motor mounts for the EM2. (All from a parts car.)
I know what other parts I need to do the k-swap. I just don't know what engine and trans to buy...
I want a N/A, all-street DD, that can spank when it's stock and even more once it's built. K20A2 and 6 speed no LSD or K20A Type-R 6 speed with LSD or JDM K24A and maybe a 2012 SI trans???? What do?? I keep falling back to the Type-R, cause, I can run the ECU, trans, and motor stock until I'm ready to dump a ton more money into it.
The easiest swap to swap and leave stock is engine and trans from 02-04 rsx or dcr5, but the motor power would come from a k24 but if you already have a full k20 swap you can build a k24 block on the side and swap it in later, if you want help I do this stuff on a regular basis, and I use innovative mounts I like them better and hasport does NOT make a front mount but innovative does
Msg me on Instagram gravy_built if you would like me to do your swap
Pirate Garage I had that thought too - K20 and building a k24 on the side. I like that advice. I’ll likely end up with a Type-S swap and have money leftover for a KPro and the other knickknacks I need for the swap.
I did the full bushing kit from Hardrace, and the SHG steering rack slider. BC coil overs. Holy shit, it feels like a race car. Been stock for 12 years in this EM2. It’s time to build.
I’m located in Cincinnati. Where’s your workshop?
Southern California
what turbo manifold does it have??
Custom
How's that water to air cooler?
Works great, plus short charge pipe so better spool and response
Aye when you gonna be at barona racing tho!
We will see msg me on Instagram if you want to setup a race
@@PirateGarage what software? Lemme guess kpro, ktuner
Kpro
Sixck shit Red😎😎
🎶🎶🎶
This thing is mean, pay attention DJ lol
Dj fck this up. Yoooo do a fck ing burnout. Smh..
What manifold are you running?