Wow. You can see the build quality inside. Good to know it's not just some pretty speaker on the outside with barebones internal components. The wire insulation, grooved wood, and bass port inside proves that this isn't just random woofers and tweeters attached to a hollow piece of wood.
Hello! How do I remove the front panel? It got muddy, I have to clean it somehow. Only because the heads of the screws are not visible like in Woburn 3. Thanks!
Chào mọi người e là thành viên mới ạ.. hiện e đang sử dụng marshall tufton hàng ash.. đem ra ngoài trời chơi nhạc ở mức âm lượng 50% đỗ lên nghe rất hay.. khi đem về phòng nghe du dương ở mức 20% nghe ko hay lắm.. bị tiếng bass hơi lấn qua tiếng trep và trung âm mặc dù đã giảm bass nhiều.. mong anh em nào biết hiện tượng trên là gì trả lời giúp e.. xin cảm ơn
I tried taking off the back side after unsrewing it wont come off also how to fix blown speaker i this speaker less than a year the bass just blown out
@@dilipsamuel9345, Hi, I want to say by this that if the walk is long and you want to listen to music continuously at full volume, for example, for 10 or more hours in a row outdoors without the ability to connect to an outlet, then in case of a discharge of one battery, you will not be able to quickly change it to another, as for example, in the GoPro action camera. It will be necessary to remove the wall from the back of the column and the bracket (clamp) that attaches the battery. Then remove the dead battery, put another one, repeat everything in the reverse order. It is not necessary to completely discharge the battery before changing, but in my opinion it makes no sense to climb inside the speaker once again ahead of time. When the battery is completely dead, then change it, after taking a spare one with you. And then do it the way you like it best.
Hi i have a question, after removing all the screws, the back part wont come off unlike in the video that it was easily remove. Was hoping you can help me. Thanks!
It's because manufacturing applys a very light sealant on the inner edge of the case befor they pop in the cover to minimize the effects vibration and air pressure has on the case and also on the screws so they don't don't get loose. To remove the back cover; take a thin spatula-like craft tool and fit it between the back cover and the case. Push it in a 1/4 inch and draw it down. This will take some strength, be patient and pull/push slowly. Once you're done with all four sides take a screwdriver with a thin head push it in, and pry the cover out a little, move down 3 inches and repeat for call 4 sides. At some point the cover will separate enough to get a finger in and pull it out.
try : - turn off power - press and hold bluetooth button - turn on power ( still hold bluetooth button for 15 secon ) - releve bluetooth button - turn off and on again
I have a problem with my speaker. when I turn on the speaker, the speaker freezes completely. I can't turn it off anymore, it doesn't do anything anymore. it only turns off when the battery is empty. please help me..
Hi bro i have question I bought tufton few days ago .i open it up its peerless sub in it .is that good.? Or someone change it to cheap sub nd return it.!!
My tufton only works with electrical cable now,i keep it in plug in all night all week but doesn’t turn on without cable,I don’t know how to fix it ! If you guys have any solutions please help “thank you “
Hello, which approximately capacity (mAh) of battery? Have you this information? Because this information is not in the official site of manufacturer. Thanks!
Wow. You can see the build quality inside. Good to know it's not just some pretty speaker on the outside with barebones internal components. The wire insulation, grooved wood, and bass port inside proves that this isn't just random woofers and tweeters attached to a hollow piece of wood.
🎯
Thanks for helping me fixing my speaker by reading comments! Battery wouldn’t charge and followed what you said and NOW IT WORKS!!!
Thanks again
no problem ! thanks
I habe the Same Problem, Hof do you Fix it
Hace cuanto tiempo lo tenes y en que momento empezó a fallar la batería??
excelente aporte solo falo desarmar los parlates para verlos con mas detalles.....saludos
With some careful cutting and modification, is there enough space to swap the rear facing midrange to the front...eh where it belongs?
Incredible narration
Hello! How do I remove the front panel? It got muddy, I have to clean it somehow. Only because the heads of the screws are not visible like in Woburn 3. Thanks!
Anh ơi. Em hỏi chút. Mạch nguồn con này bao nhiêu voll đó ạ
My Tufton will not charge or power with cord could this be a battery or would it work plugged up if had bad battery?
Which amplifier ic has been used?
Chào mọi người e là thành viên mới ạ.. hiện e đang sử dụng marshall tufton hàng ash.. đem ra ngoài trời chơi nhạc ở mức âm lượng 50% đỗ lên nghe rất hay.. khi đem về phòng nghe du dương ở mức 20% nghe ko hay lắm.. bị tiếng bass hơi lấn qua tiếng trep và trung âm mặc dù đã giảm bass nhiều.. mong anh em nào biết hiện tượng trên là gì trả lời giúp e.. xin cảm ơn
I tried taking off the back side after unsrewing it wont come off also how to fix blown speaker i this speaker less than a year the bass just blown out
Why it has no heatsink for amplifier chip, what class of its chip
I can't find information of the speakers, ohm, rms, spl etc... And i want to replace the mid speaker into the front panel 🙈
Did you manage to put the mid speaker to the front? Was it difficult? Do you have improvement in the sound?
Hello do you have spares? I need the plastic tube
Replacing battery is no so light activity. You must prevent to disconnect 12 bolts and after to set return.
Hi what do you mean by that? Do I have to drain batter before changing?
@@dilipsamuel9345, Hi, I want to say by this that if the walk is long and you want to listen to music continuously at full volume, for example, for 10 or more hours in a row outdoors without the ability to connect to an outlet, then in case of a discharge of one battery, you will not be able to quickly change it to another, as for example, in the GoPro action camera. It will be necessary to remove the wall from the back of the column and the bracket (clamp) that attaches the battery. Then remove the dead battery, put another one, repeat everything in the reverse order. It is not necessary to completely discharge the battery before changing, but in my opinion it makes no sense to climb inside the speaker once again ahead of time. When the battery is completely dead, then change it, after taking a spare one with you. And then do it the way you like it best.
witamy serdecznie. Jaka jest pojemność baterii?
How big is woofer?4 inch or more
The Woofer is 5,25 Inch
What ohm is the subwoofer? And watts
Hi. Nice video, what is the frequency response on this speaker 40-20000hz +-3db, or how much decibel?
Approx 90 DB bro when I tested to my Marshall tufton
Hi i have a question, after removing all the screws, the back part wont come off unlike in the video that it was easily remove. Was hoping you can help me. Thanks!
i can help you via facebook chat facebook.com/ngongocrang
Hi, I have the same question. The back cover so tight & won't come off. Appreciate if can help. Thanks.
It's because manufacturing applys a very light sealant on the inner edge of the case befor they pop in the cover to minimize the effects vibration and air pressure has on the case and also on the screws so they don't don't get loose. To remove the back cover; take a thin spatula-like craft tool and fit it between the back cover and the case. Push it in a 1/4 inch and draw it down. This will take some strength, be patient and pull/push slowly. Once you're done with all four sides take a screwdriver with a thin head push it in, and pry the cover out a little, move down 3 inches and repeat for call 4 sides. At some point the cover will separate enough to get a finger in and pull it out.
Hello, I bought a Marshall TUFTON speaker and I stop dreaming and I do not receive a charge, the Charge Led did not turn on again. How can I fix it?
try :
- turn off power
- press and hold bluetooth button
- turn on power ( still hold bluetooth button for 15 secon )
- releve bluetooth button
- turn off and on again
Wow this works you saved my life!!!!!!! @delta mobile thank u
@@deltamobile5325 YOU SAVED MY LIFE!!!! i was tripping man, this product cost so much, i cant say thank you enough.. really appreciated
Hello, you saved my speaker!’ Thank you from İstanbul! Peace. @delta mobile
@@deltamobile5325 omg, you just saved my time from going to the store to find out what happened to my speaker. thanks a lot mate
cool
Молодец
can i upgrade main speaker?
Какие микросхемы стоят?
งานใชน่าดีมั้ยคับ
Cuantos MHP es la batería ?
I have liked this video.
thanks you
How to fix blown out bass
Can you tell me marking chip sot 235 please?
I don't understand your question!
@@deltamobile5325 tell me please marking of the SOT 235 chip whats on the board amplifier
I have a problem with my speaker. when I turn on the speaker, the speaker freezes completely. I can't turn it off anymore, it doesn't do anything anymore. it only turns off when the battery is empty.
please help me..
try to reset the speaker ! ( press and keep the pair button 15 sec )
@@deltamobile5325 that's the point, it gets stuck after 6 seconds. Then it doesn't do anything.
@@liamterlouw2755 open your speaker and check contact on/off power !
Hi bro i have question I bought tufton few days ago .i open it up its peerless sub in it .is that good.? Or someone change it to cheap sub nd return it.!!
can you take a picture and send me ! chat me via facebook nick Rang ngo Ngoc !
DELTA mobile hi can’t find you .please message me on Facebook DHAMI TORNADO
Tất cả mấy cell pin vậy bác.
4 cell e
и за это барахло 500 баксов? Маршал -да ты обнаглел.
С блока питания какое напряжение уходит на основную плату ?
power module ( minute 3:00 )
Здравствуйте, вы знаете, сколько вольт это?
@@deltamobile5325 How many volts is the power module?
The baterie is so tiny lol
Same with Kilburn II when i opened it. Its like 3 x AA batteries tied together.
SpeedManiac i had the killburn before the tufton lol
@@milchpulverkakao4917 y como te salio??
My tufton only works with electrical cable now,i keep it in plug in all night all week but doesn’t turn on without cable,I don’t know how to fix it ! If you guys have any solutions please help “thank you “
battery inside have problem ! you need replace a new battery !
@@deltamobile5325 where can I get a replacement battery for mine?
@@davidmedina531 you can buy on Amazone !
@@deltamobile5325 what do I type in to find the right one
@@davidmedina531
www.amazon.com/Replacement-Battery-for-Marshall-Tufton/dp/B08P7CYQQ4
I can’t see amp IC no
Hello, which approximately capacity (mAh) of battery? Have you this information? Because this information is not in the official site of manufacturer. Thanks!
capacity = 5200 mah , 10.8 volt
@@deltamobile5325, it's a true? Because in this video I see not this information.
sure ! or you can see link www.smavtronics.com/5200mah-c196g1-battery-for-marshall-tufton.html
A los cuantos años empieza problemas de batería de este modelo??
@@cristianquilaleo6076, Sí, hay tal cosa, incluso después de aproximadamente un año, la capacidad se reduce a aproximadamente 1.5 - 2 veces.
Manufacturer Guangdong
มีของปลอมมั้ยคับ
Ic.tpa????
3118 probly