🎉I did it. First time soldering to. For anyone that may have problems with soldering, Flux is usually the problem. Or fine some old electronics to practice on. Link to some detailed pictures would have been nice.
Does this still work? The soldering is no problem, like the rapid fire. I'm planning to get my self one But I don't see much information out there About this product
So someone tell me, i dont want to use the touchpad on my paddles but i want to be able to link my L1,L2,R1 & R2 buttons, do i need to do any welding? And some instructions would be nice. I have to buy a controller so should i go for BDM-010/020 or 030
if you are not going to remap toucpad to back paddles, you can skip the soldering. soldering is only required if you are doing to remap touchpad. secondly if also arent doing to remap r1r2r3, l1l2l3 then you dont need to change the ribbon cables either. just attached the ribbon cable with holes under the motherboard put everything back together and attached the end ribbon cable to the slot in the back of the trim they provide and you are done. i only map face buttons so it makes the installation alot simpler as i dont need to open the touchpad or other things.
🎉I did it. First time soldering to. For anyone that may have problems with soldering, Flux is usually the problem.
Or fine some old electronics to practice on.
Link to some detailed pictures would have been nice.
Does this still work? The soldering is no problem, like the rapid fire. I'm planning to get my self one But I don't see much information out there About this product
Still works but not very quiet 🤫. Loud click @@frankieenlacasa5216
can you also make a video showing us how to use it?
Hi, any software for this Remap kit? Just boughted from Alliexpres. And works ok ( without soldering for L3,R3, touch). Thanks for tutorial!
What's the difference between soldering l3,r3,touch, and not doing it?
@@withoutfear2117 you cant map those.
@flrazvan so if I don't use that wire it will work normal i just can't map L3,R3 AND TOUCHPAD?
@@owesales4805 i remember it was only for L3 / R3/ Not sure it was over 6 months ago.
So someone tell me, i dont want to use the touchpad on my paddles but i want to be able to link my L1,L2,R1 & R2 buttons, do i need to do any welding? And some instructions would be nice. I have to buy a controller so should i go for BDM-010/020 or 030
Hey I’ve done all this all right a) my X button doesn’t work and B) I can’t play ps5 on in inly pc
What does a soldered cable to the touch ground do?
What does the touchpad have?
if you are not going to remap toucpad to back paddles, you can skip the soldering. soldering is only required if you are doing to remap touchpad. secondly if also arent doing to remap r1r2r3, l1l2l3 then you dont need to change the ribbon cables either. just attached the ribbon cable with holes under the motherboard put everything back together and attached the end ribbon cable to the slot in the back of the trim they provide and you are done. i only map face buttons so it makes the installation alot simpler as i dont need to open the touchpad or other things.
@@AS-xe3qj do you know if it is the same for bdm 030?
But i have BDM-030,How to do ?
just don't, you need to solder even when it says no solder needed. waste of $60 and highly mad and annoyed
@@Asppecttyou can still use it, you just can’t use the l3 and r3 and touch pad buttons to map, rarely used
you guys scammed me
Did it not work or? Bought one because I wanted paddles but it seems like I made a mistane as all the comments are saying they dont work