The text at 9:13 was supposed to say that I ended up loosening it slightly more I also forgot to mention that the springs loosen up over time as the cube gets broken in, so you may want to use a lower compression setting initially and increase it after a few hundred solves
@@2oux using the teal corners important because the core magnets are embedded in them, but my main YS3 randomly got really slow sometimes and it hasn't done that since I swapped edges
I unfortunately do not have xmt or silk but i have the angstrom duo, mystic, dnm, trax 50k, and stardust and lunar. What would you recommend to setup my huameng if i were to look for a similar feel?
You're welcome! If the springs do end up being different, it should still work, but you may need to use a different compression setting. Also, If your RS3 M 2020 is fairly new, you may need to start on a lower compression setting and increase it as the springs break in - they are a little stiff out of the box
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
The text at 9:13 was supposed to say that I ended up loosening it slightly more
I also forgot to mention that the springs loosen up over time as the cube gets broken in, so you may want to use a lower compression setting initially and increase it after a few hundred solves
Your setups crack me up bro there's no way
How so?
@@StevenWintringham using the purple corners is a very strange placebo
@@2oux using the teal corners important because the core magnets are embedded in them, but my main YS3 randomly got really slow sometimes and it hasn't done that since I swapped edges
Great straightforward Setup, can’t wait to do this tomorrow!
Let me know how it turns out
This setup is actually really underrated tbh.
i watched this video on mute but i think you did a good job of explaining things
Bro...
My Y already has edge magnets and springs swaps. Nobody else would tell me how to tension and lube THAT. So I went to the master.
Common Steven banger set up tutorial
Is there any substitute for xmt 10 that is a cubicle premium lube?
Not really, but thecubicle sells xmt
does this setup work on the v5?
It probably works but not as well
How did you set up Luke grisser gan 12?
Video soon
@@StevenWintringham thanks
Perfect 👌🏽🤌🏼
Food setup tutorial bro. Out of curiosity, do you know about this setup because Stanley uses it in general, or specifically for the ys3m?
Yes
@@StevenWintringham steev in
I unfortunately do not have xmt or silk but i have the angstrom duo, mystic, dnm, trax 50k, and stardust and lunar. What would you recommend to setup my huameng if i were to look for a similar feel?
Probably just gravitas and dignitas
@@StevenWintringham Thanks
Is the hub much better with springs? Like the modified Wrm v9?
It doesn't make as much of a difference as it does on the v9, but I still think it's better with springs
I just unmaglev my magic clothes ys3m and it is insane
Springs ftw
Are you gonna sell them
@@simplycubing probably not
Spring is better than maglev why tho?
More controllable and I think it feels more consistent
can you use the springs of rs3m 2020?
Yep! The super has different springs though
im considering to use the srpings of rs3m 2020 because i didn't have the standard ys3m. Does the rs3m 2020 and ys3m standard have a different springs?
@@echo6509 they are the same as far as I know
@StevenWintringham Alright I'll try modding it, thansk alot man 😁
You're welcome! If the springs do end up being different, it should still work, but you may need to use a different compression setting. Also, If your RS3 M 2020 is fairly new, you may need to start on a lower compression setting and increase it as the springs break in - they are a little stiff out of the box
What edge did you replace to the ys3m?
I put YS3 standard edges in the YS3 ball core
Yo Steven 3 M
god damn silk gravitas xmt10 thats a extremely slow setup you might wanna change the xmt 10 with some dnm
I try to avoid DNM because it is humidity-dependent
@@StevenWintringham oh alright that makes sense since personally I like cube who can do u4 in one flick yeah😂
how about just chucking a shit ton of traxxas into a cube with stock tensions and calling it a day
I suppose that works, but it doesn't sound like a lot of fun
Food cube
Early bro
Food
Thanku bro
#maglevisoverrated