Today video I give you my thoughts on why I think the PXN v12 DDL should be at the top of your list when looking for a direct drive wheel for Xbox. @PXN_official
No, I tried plugging in my PXN pedals to my moza base and it only worked one time then it stopped. I tried plugging my moza pedals into my PXN base and it didn’t work.
Thank you for the review, i purchase this wheel a week ago and find this problem, Does the "RGB" light on the wheel have to work like the RPM light? because the light remains Static and doesn't work like the RPM Light, do you know how to fix it?
Ok, so the light works in GT sport and GT 7 on PlayStation. I did get the light to work in Assetto Corsa competizione if you use the link in the PXN software to open that game. It’s a very confusing way of getting it to work. Other than that I haven’t been able to get it working as a rpm light.
@@JoeyBagZ on the PXN Racing APP, on the Dashboard section the games only detect WRC Generation, even though my PC has F122, ACC, AC, Dirt Rally 2.0, but only WRC Generations is detected, how do I detect the game on the APP? because when i start WRC Generations from the APP, like you say the RPM Light works fine
@@ahmadihsan29 I never figured that out. I can honestly say I also never really tried. Reach out to PXN to see if they can tell you how to get games detected. I just never really tried.
yeah i already email the PXN and waiting the respones, 1 more question sorry :) , do you have any problem with the base when you turn off the Base, you can't turn it on again before you unplug and plug the power cable again from the base, @@JoeyBagZ
@@ahmadihsan29 I never turned it off. I did have a problem once that the wheel base went into a deep sleep, I had to unplug it, left it unplugged for an hour then plugged it in and held the power button for about 10-15 seconds. It did that twice, I contacted PXN and they replaced my base. After that I just never turned it off. I just left it plugged in and turned on.
I was looking to get this wheel for ACC. Does anyone known if anything changed and you can use this wheel and base for ACC? Currently playing ACC with Thrustmaster TMX on Xbox Series S.
You can you plug a Xbox controller into the back of the wheel base where it says gamepad and it tricked the Xbox into thinking it’s a g920. But there is a weird issue where to get the pedals to work you have to go through a process. Not hard but could get tedious.
je vois une désynchronisation entre la base volant et celui qui est affiché à l'écran sur Xbox, mais pas sur assetto PC sur vos vidéos, est ce normal ?
When I am recording Xbox on my PC there is a little bit of input lag, when I am not recording and just playing on the tv everything is normal. It only happens when I use OBS to record my Xbox, and Ps 5. Assetto corsa I am running directly from the same PC so I have no input lag.
I rewatched to see, and while I’m not seeing a desynchronization on some games the wheel angles don’t fully match, it’s settings I have adjusted. Like Forza horizon 5, you can see me turn my wheel farther than the wheel on the tv screen moves. I also don’t know if it looks like that because I am recoding on my phone at 60fps and some of the games fluctuate on console. I can tell you it’s not something perceived while playing, at least not for me and hasn’t affected my gameplay. But I will look into it some more.
@@JoeyBagZ merci pour les réponses, ce n'est peut être pas une désynchronisation mais plutôt à l'angle de braquage différent entre la base et l'affichage comme vous le dites. en tout cas, je suis convaincu de la qualité que produit PXN, et j'attends qu'un distributeur officiel vende le V12 10nm en France, et ce grâce à vos vidéos👍
Actually if you look at the comment above I explained how to customize the wheel. It you can also order the PXN v12cw 13” round wheel from micro center for $150. I had that and was able to separate the wheel from the button box. I then used the button box to make a gt3 style wheel and then used the plain 13” wheel with a NRG quick release I ordered on Amazon to make a buttonless wheel I use with cars like the Miata where I used the h shifter. I have the videos on the channel.
Hola buenas gracias por tu vídeo la verdad es que estoy echo un lío con lo de comprar un moza r5 o r9 oeste pxn .sacarán más volantes para esta base porque me gustaría tener un volante para esta base de F1. Podré adaptar un volante thrumaster que tengo en esta base de alguna manera aunque fuera por USB ? Gracias un saludo grande
I can understand wanting to have specific wheels for different types of driving. The good part is that since PXN did use a NRG quick release that as long as the wheels button box can work connected to a PC via USB then you can use it on this base. I have other videos on my channel about my custom wheel I made using the PXN v12cw button box and a Acelith designs ace-one v2 wheel. I am trying to get a hold of a moza ks wheel with the universal hub adaptor. Wheels from 3DRap like the Vota will work as long as you have a NRG wheel side release and wheels from the likes of GSI. The big thing is the button box has to be able to plug into the PC via usb or Bluetooth. If the button box cannot communicate with the PC it will not work. If you have any more questions do not hesitate to reach out.
It was 2:30 a.m. and I had to try to see if this worked, unfortunately, it did not work. it resets the controller but it still doesn't solve the problem where the control scheme defaults back to the controller instead of the wheel. and while it's all detected in the main menu, once in the actual track, it reverts back to the controller, and if you move to the wheel it doesn't detect inputs.
@@JoeyBagZ So basically when you're in the game go gome hold the 5 seconds then go back to the game change it to wheel setting make a name of your settings then put save and then it should work I know what you mean bc it has happened to me but it does work I've been playing it lately
@@m_rodbearings so when I am sitting in the pit lane press the home key to go back to the Xbox Home Screen ? Then press l3 r3, the controller resets, it asks me to press a to reconnect, then go back into the game and select wheel, set my buttons and save that profile and go back into the game?
@@JoeyBagZ yeah if you still don't get it I'll make a short video and I'll let you know when I post-it bc I have to do it mostly every time I want to play the game
when trying to connect the base to the xbox, do you have a controller pluged into the gamepad usb port on the back of the direct drive base? and when trying to connect to the PC are you making sure there is no controller plugged ijnto the back "gamepad" USB port? @@Garage_Built_Drivers
@@Garage_Built_Drivers then I am at a loss for what could be the issue. Reach out to PXN on twitter, they are very responsive. They should be able to walk you through some trouble shooting.
Thank you
Hey Joey. The PXN V12 Lite has modular pedals, do you know if the Moza load cell brake pedal for the SRP Lite will work on the PXN PD HM pedals.
No, I tried plugging in my PXN pedals to my moza base and it only worked one time then it stopped. I tried plugging my moza pedals into my PXN base and it didn’t work.
I actually had made a video but I pulled it
@@JoeyBagZ did it work?
@@JoeyBagZ sorry I didn’t see this.
@@JoeyBagZ did you try it with the hub?
Thank you for the review, i purchase this wheel a week ago and find this problem, Does the "RGB" light on the wheel have to work like the RPM light? because the light remains Static and doesn't work like the RPM Light, do you know how to fix it?
Ok, so the light works in GT sport and GT 7 on PlayStation. I did get the light to work in Assetto Corsa competizione if you use the link in the PXN software to open that game. It’s a very confusing way of getting it to work. Other than that I haven’t been able to get it working as a rpm light.
@@JoeyBagZ on the PXN Racing APP, on the Dashboard section the games only detect WRC Generation, even though my PC has F122, ACC, AC, Dirt Rally 2.0, but only WRC Generations is detected, how do I detect the game on the APP? because when i start WRC Generations from the APP, like you say the RPM Light works fine
@@ahmadihsan29 I never figured that out. I can honestly say I also never really tried. Reach out to PXN to see if they can tell you how to get games detected. I just never really tried.
yeah i already email the PXN and waiting the respones, 1 more question sorry :) , do you have any problem with the base when you turn off the Base, you can't turn it on again before you unplug and plug the power cable again from the base, @@JoeyBagZ
@@ahmadihsan29 I never turned it off. I did have a problem once that the wheel base went into a deep sleep, I had to unplug it, left it unplugged for an hour then plugged it in and held the power button for about 10-15 seconds. It did that twice, I contacted PXN and they replaced my base. After that I just never turned it off. I just left it plugged in and turned on.
Can you. Play forza motorsports with this wheel
Yes. I have video of me using this wheel with both Forza Motorsport 2023 and Forza Horizon.
I was looking to get this wheel for ACC. Does anyone known if anything changed and you can use this wheel and base for ACC? Currently playing ACC with Thrustmaster TMX on Xbox Series S.
You can you plug a Xbox controller into the back of the wheel base where it says gamepad and it tricked the Xbox into thinking it’s a g920. But there is a weird issue where to get the pedals to work you have to go through a process. Not hard but could get tedious.
je vois une désynchronisation entre la base volant et celui qui est affiché à l'écran sur Xbox, mais pas sur assetto PC sur vos vidéos, est ce normal ?
When I am recording Xbox on my PC there is a little bit of input lag, when I am not recording and just playing on the tv everything is normal. It only happens when I use OBS to record my Xbox, and Ps 5. Assetto corsa I am running directly from the same PC so I have no input lag.
I rewatched to see, and while I’m not seeing a desynchronization on some games the wheel angles don’t fully match, it’s settings I have adjusted. Like Forza horizon 5, you can see me turn my wheel farther than the wheel on the tv screen moves. I also don’t know if it looks like that because I am recoding on my phone at 60fps and some of the games fluctuate on console. I can tell you it’s not something perceived while playing, at least not for me and hasn’t affected my gameplay. But I will look into it some more.
@@JoeyBagZ merci pour les réponses, ce n'est peut être pas une désynchronisation mais plutôt à l'angle de braquage différent entre la base et l'affichage comme vous le dites.
en tout cas, je suis convaincu de la qualité que produit PXN, et j'attends qu'un distributeur officiel vende le V12 10nm en France, et ce grâce à vos vidéos👍
Binjour de la france, encore une question, pourquoi untilises tu principalement la base 6nm et non la 10nlm ?
Because the cockpit I use has a center post wheel plate. It has flex, it’s not as solid as some other rigs. The 10nm made the wheel plate flex a lot.
@@JoeyBagZ merci pour la réponse 👍
Do yoy know any way to upgrade the wheel on the v12ddl bc the stock 1 kinda weird sometimes bc its not round
Actually if you look at the comment above I explained how to customize the wheel. It you can also order the PXN v12cw 13” round wheel from micro center for $150. I had that and was able to separate the wheel from the button box. I then used the button box to make a gt3 style wheel and then used the plain 13” wheel with a NRG quick release I ordered on Amazon to make a buttonless wheel I use with cars like the Miata where I used the h shifter. I have the videos on the channel.
Hola buenas gracias por tu vídeo la verdad es que estoy echo un lío con lo de comprar un moza r5 o r9 oeste pxn .sacarán más volantes para esta base porque me gustaría tener un volante para esta base de F1. Podré adaptar un volante thrumaster que tengo en esta base de alguna manera aunque fuera por USB ? Gracias un saludo grande
I can understand wanting to have specific wheels for different types of driving. The good part is that since PXN did use a NRG quick release that as long as the wheels button box can work connected to a PC via USB then you can use it on this base. I have other videos on my channel about my custom wheel I made using the PXN v12cw button box and a Acelith designs ace-one v2 wheel. I am trying to get a hold of a moza ks wheel with the universal hub adaptor. Wheels from 3DRap like the Vota will work as long as you have a NRG wheel side release and wheels from the likes of GSI. The big thing is the button box has to be able to plug into the PC via usb or Bluetooth. If the button box cannot communicate with the PC it will not work. If you have any more questions do not hesitate to reach out.
gracias por tus comentarios
Also pxn told me how to fix the issue on acc hold l3 and r3 for 5 seconds I'll blink or vibrate then go back to the game and it works
I tried to do the pairing method with the wheel and it didn’t work for me. I’ll try it again.
It was 2:30 a.m. and I had to try to see if this worked, unfortunately, it did not work. it resets the controller but it still doesn't solve the problem where the control scheme defaults back to the controller instead of the wheel. and while it's all detected in the main menu, once in the actual track, it reverts back to the controller, and if you move to the wheel it doesn't detect inputs.
@@JoeyBagZ So basically when you're in the game go gome hold the 5 seconds then go back to the game change it to wheel setting make a name of your settings then put save and then it should work I know what you mean bc it has happened to me but it does work I've been playing it lately
@@m_rodbearings so when I am sitting in the pit lane press the home key to go back to the Xbox Home Screen ? Then press l3 r3, the controller resets, it asks me to press a to reconnect, then go back into the game and select wheel, set my buttons and save that profile and go back into the game?
@@JoeyBagZ yeah if you still don't get it I'll make a short video and I'll let you know when I post-it bc I have to do it mostly every time I want to play the game
I can’t get my PXN V12DDS to connect to my laptop or Xbox can you please help me ?
Make sure the wheel is paired to the wheel base.
it's paired to the base@@JoeyBagZ
when trying to connect the base to the xbox, do you have a controller pluged into the gamepad usb port on the back of the direct drive base? and when trying to connect to the PC are you making sure there is no controller plugged ijnto the back "gamepad" USB port?
@@Garage_Built_Drivers
Yes for the Xbox and no for the PC
@@Garage_Built_Drivers then I am at a loss for what could be the issue. Reach out to PXN on twitter, they are very responsive. They should be able to walk you through some trouble shooting.