@@technologyguide5 Greeting. I have the same oximeter. It won't work. I did the same as you, but it won't work again. Can you tell me what the problem might be. Thank you.
Excelent video. This covers all áreas of disassembling and assembling needed. I have repaired mine. The green data cable was broken. I solares and operates properly. Thanks
Sir my pulse oximeter is not working.... I kept it idle for 5-6 months(thought that battery was over, but the result was same when it was replaced even with a new one.)
What i can say i removed the top lid snd pressed the button and its working great but when i put the lid back it only glows but shows nothing now i guess i have to use it without the lid cuz i tried many times 😅
My oximeter doesn't stay on after pressing the button. I've tried spraying contact cleaner, doesn't work. Does replacing the button requires soldering?
Can i convert battery powered oximeter into wired? Majority of oximeter are 3v . Is it ok to plug it on 5v adapter? I want a real time pulse monitoring. When i use battery it drains faster so that i want to convert it as a wired oximeter.
I bought oximeter and it was worked in the shop and now it is not even switching on. Who will repair this. I don't hve equipment todo. Can u plz help with this
Yes you are right I didn't replace new one but just opened switch and put IPA solution... its not working due to struck inside only If need to change we should change new one this is SMD Switch available in market
Bro after opening of oximeter there is light ON below the display screen but in display there is nothing showing. What is the problem. I just buy it online and it's not working.
I think in my oximeter there is power better side one side are spring and opposite side are other steel type material.. I think this is not in, so what I do?
That's my problem too. The display is so faint it can only be seen when the room is in total darkness. The directions say the screen can be brightened by holding down the "on" button continuously, but that does not work.
@@shaitanbala5281 put the finger properly and check repetitive, I did face the same problem in one of the device after working fine...and some devices not working fine at normal remote batteries try Duracell batteries..
I order today my pulse oximeter for online wen I open my parsl my oximeter is not on kindly tell me it's my first time what the porbilm WY my pulse oximeter is not going on
my pulse oximeter turns off the moment i put my finger in. What can be the issue sir? I am attaching link of video that i made. Please help!!! link of video: drive.google.com/file/d/1cCVoFRA2NSqO6UI9Uh5cWdZBbRnuumqf/view?usp=drivesdk
Thanks. That worked. It was worth having to suffer the horrible music for.
oh
Really annoying background music made it hard to hear the dialogue
ok. I will improve
Omg it really works 😀😀 we tried with 3 oximeters
great
Thanks
Thanks For This Video I was Able to repair my oxymeter👌
You are welcome
Thanks i wached repair myself.
Glad I could help
very helpful thanks for sharing.
welcome bro
@@technologyguide5 bro mere case may lcd nhi aarahi hai sensor light jal rahi hai,aur button press se sound bhi aarah hai.
@@technologyguide5 Greeting. I have the same oximeter. It won't work. I did the same as you, but it won't work again. Can you tell me what the problem might be. Thank you.
@@technologyguide5 kjnn9 m
Fsg
Excelent video. This covers all áreas of disassembling and assembling needed. I have repaired mine. The green data cable was broken. I solares and operates properly. Thanks
You're welcome!
Thanks to you I followed the same pattern and was able to repair my oxymeter
Good to hear
Tnx..
welcome bro
Nice video, but bgm is irritating
yes bro... in next videos I will change thankq
Sir my pulse oximeter is not working....
I kept it idle for 5-6 months(thought that battery was over, but the result was same when it was replaced even with a new one.)
check battery terminals, it may be corrosive dead batteries can leaks acid that may be reason
@@technologyguide5 tq ji
The sensor red light is working in my oximeter but the display is not showing. Can you tell me what problem it is, can it be fixed
What i can say i removed the top lid snd pressed the button and its working great but when i put the lid back it only glows but shows nothing now i guess i have to use it without the lid cuz i tried many times 😅
It may be physical problem I think ....may be discomfort at top lid
How change the cable connected to batter and circuit as mine has cable not working properly?
And which cable works? Model No. PO 12
very useful
Keep watching
Cn u guide for repair of MRI compatible pulse oxy meter
Sorry bro I can't do that
My oximeter doesn't stay on after pressing the button. I've tried spraying contact cleaner, doesn't work. Does replacing the button requires soldering?
did you check continuity for switch ? If it yes then you should do solder
Where can i find such thin wires. In my oximeter the wire got broken. When i try to resolder the wires comes short
You can find in some electronic devices like remote control cars
Same problem . Wire is broken where i get repair of this
Thanks I recovered by seeing video .switch issue
welcome
Can i convert battery powered oximeter into wired? Majority of oximeter are 3v . Is it ok to plug it on 5v adapter? I want a real time pulse monitoring. When i use battery it drains faster so that i want to convert it as a wired oximeter.
you can but you should use 3v supply
I bought oximeter and it was worked in the shop and now it is not even switching on. Who will repair this. I don't hve equipment todo. Can u plz help with this
check battery terminals in proper manner
Did you replaced the switch? Not shown in the video.
Yes you are right I didn't replace new one but just opened switch and put IPA solution... its not working due to struck inside only If need to change we should change new one this is SMD Switch available in market
Nice
Thank you
Great Talent and I saw max video's all are awesome
Ye konsi shop me repair hosakta hai
problem kya hai
@@technologyguide5mae ne oximeter open karke check kiya . Wire cut hue hai
How do you get it apart?
Is there any place yo repair it i am from Jamshedpur
what is the problem
Bro after opening of oximeter there is light ON below the display screen but in display there is nothing showing. What is the problem. I just buy it online and it's not working.
1.check batteries
2. maybe sensor not detecting
3. if you buy on online return the product
I think in my oximeter there is power better side one side are spring and opposite side are other steel type material.. I think this is not in, so what I do?
I didn't understand bro
What microcontroller used inside the oximeter? Can it be reprogrammed? any testing probs/pad/pins are available on the PCB?
I think microcontroller Kinetis K53 used
Annoying music...... Good video
so, how did you solve the button problem?
using spirit liquid ...its contact problem and in some cases have to replace the smd button
How to fix the display ?
It doesn’t light up with a full power 3 V new battery though the red light is functioning!
is it drop in water?
That's my problem too. The display is so faint it can only be seen when the room is in total darkness. The directions say the screen can be brightened by holding down the "on" button continuously, but that does not work.
Bro sensor is not working nd sensor light s nt showing wt shd i do plz suggest me Im a doctor and i need oximeter for regular use
is it new one?
How to fix "Low Battery" error? Obviously fully charged batteries.
use alkaline batteries which are high capacity one
I have the same oximeter...But my led light inside the meter is not working.....What to do???Bro pls help
display On? or not?
My pulseoximeter is fell into water. Now display is changed continuously. What i can do?
I think Water Damaged
My choicemmed oximeter display is not working but senser light is blincking. What will be the problem plz help me
You mean no display? is it fell under?
@@technologyguide5 when finger is inserted then the disply will b hang and display will not work
@@anilbuyo1027 you need to change batteries like Duracell which high capacity try it...
Sir please help me my oxymeter get fall and after that it is not working , I have checked wires with cell its OK ..can .tell me where is the problem
check power button SMD
@@technologyguide5 okay well what is exactly SMD
Did you find the solution?
@@priyanshu5349no I haven't check much deeply ...and I will go to any electronic repair shop when they open
Oximeter ka small sencer wire to aise jagah pe dia hai ke thoda sabi dhakka lagne par wire tutjae
I have Dr trust USA oximeter always showing finger out error, any solution?
is it Red light sensor glowing?
@@technologyguide5 yes sir
@@shaitanbala5281 put the finger properly and check repetitive, I did face the same problem in one of the device after working fine...and some devices not working fine at normal remote batteries try Duracell batteries..
Where are you located?
My sidelock has broken what should I do now,
try your own like pen body for side lock
One battery properly fit nahi kiya. Cover open karte hi nikal aya hai. Isliye kam nahi kiya. Atsa set repair kiya.
sir i am from srilanka if you can sir please do a video series about biomedical instrumentation
sure bro..
I have an oximeter. Its display is not working . But sensor is working . What to do?
I think Display problem, is it fell down in water?
@@technologyguide5 no. but it has been 2 years sice i bought it, but rarely i use it .but now.. need to use it
@@ArunimaRO Did you find a solution for this issue? Thanks.
@@evapapageorgiadis150 no
My oxymeter red sensor is not working..What would be repaired?
did you check batteries voltage
How to open a drmorepain oximeter.it doesn't have side clamps.
ok I will check it and reply bro
My oximeter display screen showing very much dull light it can't be see so what to do
maybe display problem
My pulse saturation not measured and sensor lights off..how solve
check batteries is it fully charged? or try high capacity batteries like Duracell
Nice explanation
Muy buena tu intención, pero no lo pudiste desarmar, yo si, ni la tapita de la parte de atras jajajaja
tu tienes mala suerte.
White wire is broken is it necessary as red and green is intact
Oh... solder it if have soldering Iron
So ye side m blue colour Ka chota sa tire hna ye Nikal gya... Bcoj glt side se open krdiya .....ab oximeter work nhi kr rha plz help
Bro I didn't Understand please ask in english
@@technologyguide5 problem solved now..thanks for this vedio
Screen not working ..Red light sensor is working..what is the problem..how to fix it
check batteries and use high amp batteries
Water chala gaya hey what can i do ..plz suggest me
remove batteries and use Hot air gun to dry the pcb
My oximeter is not working.. both display and sensor light not working
did u check batteries? and if your device hardly used one then check power ON button
No display.what is the problem?
Bina music k repost krdo yaar...its really irritating and annoying 😒
Sure bro... I will rectify in next videos thank you
My oximeter kindapadindhi.....on avatledu eala repair cheyali plzzz help me
screen ok na? and red light sensor glow?
Music kyo baja rahe ho bhai?
That background music is loud and irritating.
सेल पिघल गया ऑक्सीमेटर में। कैसे ठीक करे
You mean battery leaked na...
@@technologyguide5 : Right
That meter covert to smart mobile phone how it possible
Your thought was great.... I will think it how it is?
बेकग्राउंड म्यूजिक इरीटेट कर रहा है 😠
ok bro i will change that music farther videos tq
LovesshDUARECLL😞😞😞😞
Not switching on
Is it new one or hardly used one?
If hardly used device SMD switch may damaged
Koi ser cetre ka mo no chahiye?
LovesDUARECLL😞😞😞😞😞
oximeter light dim..even after new battery inserted
check loose connection
नई बैटरी डालने पर भी बैटरी लो बता रहा है
Soaked in water ?
Abe music band kr do yr, Tameez hi ni hai video banane ki
ok bro tq
Music is irritating,
yes
Shows sensor off. Solution?
Replace the batteries new one some Oximeter's take more power that's y happening this...try ones
Don't run music
Ok bro next video I don't
Battery 1 din ke andar khatm ho ja rahi h plz bro solution?😭
Duracell use kro Bhai
yes you are right
Some Oximetr's takes more power that's why normal batteries not working for long time..you can use Duracell batteries that's better
Mara ak spring tuth gaya
Oh then try elastic rubber if it possible
Spring mila ga
LoveshDURECLL😞😞😞😞😞
I have a BPL pulse Oximeter. It's spring has become loose and displaced. Can you please help me get it rectified. I can send it by post
Open the Spring and reverse expand the spring then will be tight
my display is not working
is red light sensor working?
Hola asr
Spring nahi ban rhi
spring damaged na?
Cut the awful music!
ok
Trueview oxymeter not working
Can anyone who repair it but it has warranty period remaining also what to do
check batteries and check power button ...otherwise check board
We put new batteries but still not working can u suggest who can repair it in nasik
@@kalpanachaudhary7260 I don't know there I am from AP
How spring fix detaild sir
I will do another video sir, Thank you watching
sensor ott
I order today my pulse oximeter for online wen I open my parsl my oximeter is not on kindly tell me it's my first time what the porbilm WY my pulse oximeter is not going on
if you have return time then better to return it
check batteries are there?
@@technologyguide5 yes better is
@@technologyguide5 return policy is not available
It's my bad luk kindly help me
Sir oximetar gir gaya.....lekin SB chalu h bs springs ka problem aaraha h...pls kuch solution dijiye
my pulse oximeter turns off the moment i put my finger in. What can be the issue sir? I am attaching link of video that i made. Please help!!!
link of video: drive.google.com/file/d/1cCVoFRA2NSqO6UI9Uh5cWdZBbRnuumqf/view?usp=drivesdk
I think circuit problem....
check the fallowing
1. ON the device without finger in
2. check batteries
3. try Duracell high power batteries
Nice
Thanks