Access MotionEye from Anywhere : Port Forwarding
HTML-код
- Опубликовано: 4 окт 2024
- Access MotionEye from Anywhere : Port Forwarding
For Documentation Visit : pcmac.biz/moti...
Website Link : pcmac.biz/moti...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Links to my other videos
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MotionEyeOS: CCTV Surveillance System Installation & Configuration: • MotionEyeOS: CCTV Surv...
MotionEyeOs: CCTV Surveillance System Working: • MotionEyeOs: CCTV Surv...
MotionEyeOS Setup FTP Uploads Raspberry Pi 3: • MotionEyeOS Setup FTP ...
MotionEyeOS Motion Triggered E-mail Notifications: • MotionEyeOS Motion Tri...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Follow Us On!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Facebook: / log2pcmac
Instagram: / pcmac24x7
Twitter: / pcmac24x7
Pinterest: / pcmac24x7
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#motioneye, #motioneyeos, #motionpie
Thanks for watching
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
T H A N K Y O U F O R W A T C H I N G !
P L E A S E L I K E A N D S U B S C R I B E !
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
plz fuzz out your ip better, you can cee it several times in this vid
103.82.222.154
Very helpful.
We can see your username and passwords too.
Thanks for the tutorial. Very helpful.
thank you, thank you thank you. you made it so simple
Thank you
Good video, thanks!
Thanks for watching
my router does not support both at the same time TCP/UDP what should i go with
Use UDP
If you are on mobildata and you have a dinamic ip,sometimes the ip changes and you cannot enymore see the trafic
That is why we used DuckDNS to resolve this issue.
MotionEyeOS is fantastic and your video s are really helpful! Thank you! Can you make one more about webhooks, what they are, how they work?
Working on them and looking for free solutions. Once i figure it out surely post a video.
Thank you for showing this os and how to use it. I really like it but do you think I can control wireless cameras with 360° movement?
Thanks for watching, I don't have a camera that can capture 360 degree view. So, i am not able to check it on my raspberry pi.
Nice explanation. But I have no port forwarding option in my router but have virtual server option. Is it possible to configure the virtual server to work just like port forwarding?. I once tried to configure it but was unsuccessful. I use tenda 4GLTE router.please help
Please check with your ISP, they will help you in this case.
Very helpful, Im new to port forwarding and I got it to work, Lan cable though, im going to try wifi now, same setup i suppose?
Thanks for watching, and setup will be same.
thanks bro for this video
bro i have a problem when i connect the external ip with my wifi i am getting the camera action but when i use with the mobile data it is not giving the feedback
my router is different it is tplink router in this the port forwarding is different with what you had done in the video.
can you please help me with this.
What should i do if my router public ip change every time the router restarts ?
Use duckdns as shown in video.
@@PcMac24x7 I already did that, but how can I get the ip to automatically update ? , I'm I missing something?
i did everything right but its not connecting please help.
Talk to your ISP they will configure your ports and if there any blockage from their end. They will resolve it for you.
Every time I type a host name, i have to reboot. But after it reboots, it never goes into motioneye.. help me plz
Try to update your motioneye software and then check if it work or not.
tried that too... guess i just need to troubleshoot.
I can’t get this to work because I can’t type the pi’s IP address because it only allows me to type the numbers after a good chunk after my routers IP address. Can I change the end of the IP address of my pi, and still get it to work? Because if i could I think I finally could do this.
Set a static ip address for your motion eye. That will resolve the issue.
PcMac I did that, the thing I was wondering about is if I could edit the static ip, and still make it work.
You can but when DHCP lease refresh the ip address will change and port forwarding will not work after that.
PcMac Welp... looks like my router just does not support it then.
Talk to your ISP once.
Hi Mr Mac. Thankyou for a very helpful tutorial. I DID IT!! However... I can only sign in as a surveillance user, It will not let me sign in as Admin therefore i cannot access other cam's connected to it, usb cam for instance. Is there any way to sign in as admin remotely?
Thanks for Watching, Motioneyeos is under development. So, you will see many changes in near future like video recording with voice. I have used USB camera and my phones as network cameras. So, i will check your issue and let you know if it is possible or not.
When I change the ip address from my browser to static in the raspberry pi. I'm unable to view the video anymore. It reboots, but then nothing else happens. It changes the IP address at boot up but I can't access it.
Please check for updates first then try again thanks for watching
i use webcam and motion library and got 192.168.100.20:8081 for viewing is this video works for my setup??
My network lacks some fields here. I have no remote IP field for example. Looks like I have to reflash my motioneye and stream the video with appear.in or something.
If you mean missing network settings in MotionEyeos under general settings turn on advanced settings.
Hello, I have the motioneye in a raspberry pi. What can i do that see the raspberry from de internet? thankyou so much
Follow directions
Can someone help me? It keeps getting timeout... The config is correct. What could it be?
Please contact me on Telegram with your issue I will help you.
Link available on the website.
@@PcMac24x7 thanks, man!
Ur op is 103.82.222.154
And password is: passcode
I've go the port forwarding set up, and image on WiFi network, but not getting image when refreshed off the WiFi network (on 4G).
Is there a way to check that the port forwarding is connected (forwarding data) correctly?
If you are able to connect from mobile network that means port forwarding is working. You can also google for "check port is open or not".
@@PcMac24x7 No, I'm saying I can't get anything on the mobile network.
I checked if the port is open or not and it still says closed, though I've set up virtual server with the same details as used when working on WiFi network?
Could it be blocked by the ISP?
Please check with your ISP.
@@PcMac24x7 Thanks, I'll have to check with them, as everything else seems to be set up.
Hi . Thanks for at good video.
3:34 minuts in the video you settings in "MotionEye". I don't have the options "Network" - "Services" and "Expert Settings". Do you know have I get it ?
Sugestion: make at tutorial, how to use "MotionEye" on mobile device form Wan.
Thanks for watching, you need to login as admin for these options.
@@PcMac24x7 I all ready do.
Se image her : ibb.co/kPk620
Did you add any camera
Add a camera first then under 'general settings' you will find the first option to turn on advanced settings.
Thanks for watching.
I had to disable Authentication Mode to get a video stream. Is this a problem for security or other?
There are continuos updates going on in this build. This might be under development.
i think i didnt configure wifi, because im having issues
This was working for many months, but now when I check my public IP I cant see my Motioneye camera... Even tho it works on local IP! Can someone help?
Check with you ISP maybe the ports were blocked.
@@PcMac24x7 Yea this happen exactly, but yea with a new Public IP this works fine now again :)
So I put Service Name is called Camera, Source Target is the Raspberry Pi's IP address, Port Range is 8081, Local IP is my local IP address, Local Port is 8081 and Protocol is TCP and UDP. And it's not working! Please if anyone can figure out if I'm doing something wrong here please reply! :( Also in my Port forwarding Basic Config the FTP Server Port is set to 2021 is it okay or should I change it? :)
Please check with your ISP for port forwarding.
Well, what should I ask them?
Might be your ports were blocked by your ISP, you can ask them to forward your ports and unblock them.
But I do get an error in the Asus config page "The WAN IP is not the external IP. External IP-based services will not work." Maybe if I could fix this issue, then I might be able to connect to my public IP and the port?
this is your personal router or it given to you by your ISP.
so i got everything working. BUT, it's not asking for password when connecting from my phone, just takes me right to the stream. any idea how to fix that?
solved. port 8081 is a direct link to steam bypassing login but port 80 allows me to log in and control motioneyeos.
Because the password got saved at first time that is why it is not asking for password try another device.
@@PcMac24x7 this was the first time. just installed motioneyeos yesterday. just configured port forwarding today and first ever attempt to access it from my phone with port 8081 took me directly to stream with no request for password and no access to controls. however forwarding port 80 and connecting to that i did get a password request and access to controls.. could be a change in versions perhaps?
also noticed in your video you have ports 80,81 and 8081 all forwarded to motioneyeos
Thanks for all your efforts.
Can i use my pc usb cam with motioneyesos?will it work!
Yes it will work, thanks for watching.
I dont have static ip, does it still work with the process you have shown
You can set static IP on motion eye. Please try again.
nice public ip 103.82.222.154
Time to go nuts xD
Any workarounds for if I don't have public IP?
Use duckdns
I get an ERROR saying "start port and end port cannot be the same" when I enter 8081 for each of them?
The only way I don't get an error is by entering Start-80, End-81.
Is this correct as the port is not open once set up?
Please sahre your router model, i will let you know the settings.
@@PcMac24x7 Thank you very much for quick response.
Router is:
DIR-825
AC1200 Wi-Fi Dual-Band Gigabit Router
Type start port as 75 and end port as 85. This will open these 10 ports for you. or you can select a range of your choice.
@@PcMac24x7 Thanks I'll give it try, and see if it works.
I have the newest motioneye os 2019 something. i have portforwarding the ip on raspberrypi3 in my router. i have made passwords, and everything in your video. i cant still connect to motioneye outside my network, cant connect to video stream and nothing.
I think i need to make another video.
I am unclear after Whats my Ip.
I have my public IP but cant connect, please help
Forward the ports on your router and then try to access your motioneye from a different network with your public ip address.
type in browser from device NOT on the network . format should be xxx.xxx.xxx.xxx:8081 replaces X's with your WAN ip followed with a : then port number
ok so i just figured out that 8081 is the direct port for the stream. if you want to make changes to motioneyeos you need to forward and connect to port 80.
What is Wan IP? Where do I find it?
I can’t access the pi after setting it to static IP. Great, now I will need to reflash again.
Sorry, guess that’s normal. Gotta try to port forward it first
@@CounterFlow64 did reflashing solved it?
@@javiergarciaserrano1663 I was a noob kid back then, I just didn't type in the new static address, i typed the old dynamic address.
Not working
Please check with your ISP for port forwarding.
@@PcMac24x7 I already check ISP port forwarding
6:11 you can see the ip adress xD
103 82 222 154 is your IP address lol
I already changed my ISP