Do you test drive the cars you build on the street if so can we see some of those videos Thanks for the great videos it gives me something to watch during this covid bullshit ....
For a $4000 intake! Man, these LT performance parts are crazy. Happy New Year and you guys' videos are awesome! And to think I was excited when I scored a LT2 intake......
Such a simple build, and about doubled the hp.. pretty damn impressive. They sound so good. Can't wait to see what the new Z06 has to come.. if it has twins and a flat plane crank I can't imagine how much difference simple tune will make..
IF you can get it tuned. GM is working pretty hard to keep their ECMs from being written over. C8 is out about 1 year now and nobody has cracked the ECM yet.
Great video guys. Nice to see some new install how-to's. ZO6 makes some scary power. Can't wait to see that Camaro on the Dyno. Thanks and Happy New Year. Hope you get back to the track again. 🇺🇸👍
You can use rubber mallet instead of the spoon. It would be alot easier and it be easier on the bead of the tire and also makes easier to put the bead of tire in the bead the rim. Not trying to be a dick. I've mounted beadlock wheels for a long time on hundreds of tires in off-road community. I enjoy warch you guys. Have a happy new year
Happy New years, liked seeing some different things in the channel. Maybe go through the Guys tool boxes and speciality tools that they use oddities type of tools.
I think the guy working on the orange procharged car "matt" i think explains himself the best on video even though he was doing a fairly simple install
So I was in Maryland this weekend and I knew you guys wouldn't be open, but I looked you up just to see if you were close to place I was visiting only to find out you guys are in Delaware 🤣😂
Hi sir, I have a corvette c7 with the LT1 416 stroker engine and I installed the F1A94 procharger with 4.13 head unit pulley and I'm planning to replace the head pulley to 3.85 with pump gas and I couldn't find a clear lead for the size of the belt that will fits perfectly in my corvette. In addition, my current belt is K080450 could you please advise me what is the best belt number to be fit in my new upgrade? Or I don't have to change the belt just tight it with the procharger tensioner?
Dude..when you ran the catch can hose under the throttle body you mentioned it sits right on top of the water pump. From the angle I could see in the video that hose was going to rub against the belt to the water pump...hope you tied it off so it does not hit the water pump belt
Maybe you guys should downgrade the tire machine. It’s no fun with dual rollers. Single roller and 2 pry bars. Yea damage and cost goes up. But so will your views. Besides. Stickies are easier to mount then like 315/35/20. Lol. I love you guys.
Question for anyone that has a good legit answer. Does this c7 z06's tranny handle that HP? I barely see anything spec wise on the transmissions of these autos with that much power.
These guys are meticulous. Great watching them doing the installs! 👍🏻
I was just thinking the same thing, no wonder they're such a busy shop
I’m with Bill 100%, those orange valvecovers look SICK!
RPM does some killer ass work! Cheers to you all!
RPM installers are at a different level!!! Matt amazing job dude... nice video content!!💪💪
Talk about an awesome shop with top notch mechanics! The knowledge of all involved is reassuring these days.
Great idea ..... let’s all order some rims and rally tires. And send them to RPM to get mounted It would be the best episode ever.
Killer C7 Z06 and sweet beat at the end. RPM’s always cranking out top notch cars. Happy New Year to the entire RPM staff.
The orange SS 1LE looks really nice, never would of thought anyone could pull off a good looking orange paint.
Do you test drive the cars you build on the street if so can we see some of those videos
Thanks for the great videos it gives me something to watch during this covid bullshit ....
For a $4000 intake! Man, these LT performance parts are crazy. Happy New Year and you guys' videos are awesome! And to think I was excited when I scored a LT2 intake......
Billet anything isn't cheap
@@Bmackins94 you ain’t lying!
Never knew that about those welds 👌🏾
Such a simple build, and about doubled the hp.. pretty damn impressive. They sound so good. Can't wait to see what the new Z06 has to come.. if it has twins and a flat plane crank I can't imagine how much difference simple tune will make..
IF you can get it tuned. GM is working pretty hard to keep their ECMs from being written over. C8 is out about 1 year now and nobody has cracked the ECM yet.
Great video guys. Nice to see some new install how-to's. ZO6 makes some scary power. Can't wait to see that Camaro on the Dyno. Thanks and Happy New Year.
Hope you get back to the track again.
🇺🇸👍
Thats good info on the weld wheels and tire setup. Makes sense now. Not that I would ever have a car worth getting these.
Best way to start the New Year!! Looking forward to seeing more.
Wait... 2 install how-to/overview in one video... Steve handing out company secrets 😆 🤣 😂 😹 😆
UPR should pay matt or at least sponsor him with some parts for his fox, Excellent installation
You can use rubber mallet instead of the spoon. It would be alot easier and it be easier on the bead of the tire and also makes easier to put the bead of tire in the bead the rim. Not trying to be a dick. I've mounted beadlock wheels for a long time on hundreds of tires in off-road community. I enjoy warch you guys. Have a happy new year
Happy New years, liked seeing some different things in the channel. Maybe go through the Guys tool boxes and speciality tools that they use oddities type of tools.
Man a lot of details in this episode. Good deal Steve. 👌🏼🤘🏻
haha no way thanks my dude hope everyone has a great start to the new year
Happy New Year RPM team! Another awesome build. Have a safe and prosperous 2021!!
I think the guy working on the orange procharged car "matt" i think explains himself the best on video even though he was doing a fairly simple install
Hot damn, that C7 is UNREAL! Also, nice to see a high horsepower car that is loud, but not _the neighbours are gonna call the cops_ loud. LOL
So I was in Maryland this weekend and I knew you guys wouldn't be open, but I looked you up just to see if you were close to place I was visiting only to find out you guys are in Delaware 🤣😂
Want to send my V2 to you guys just make sure Eric works on it since he hates working on gen two ctsV’s 😂
Sweet build... Happy New Year all 😎✌️
That C7 is beautiful
Oh what a beast . Beautiful vette
Timmy is gonna be flying!! 🦅 Nice job fellas, it looks great!
Awesome episode !!!!
Was there any fuel modifications besides I’m sure a fuel lobe on the cam?
I'm sure he's more of a pain than it's worth but streetspeed shoulda kept using yall
My guess is he wanted all of his shit for nearly nothing. Notice all Ss717s former friends don’t talk with him anymore.
The entire time you were on the orange camaro I couldn't focus on anything but your nose whistling as you were breathing lmao
Sick Z06
Hi sir, I have a corvette c7 with the LT1 416 stroker engine and I installed the F1A94 procharger with 4.13 head unit pulley and I'm planning to replace the head pulley to 3.85 with pump gas and I couldn't find a clear lead for the size of the belt that will fits perfectly in my corvette. In addition, my current belt is K080450 could you please advise me what is the best belt number to be fit in my new upgrade? Or I don't have to change the belt just tight it with the procharger tensioner?
Excellence always!!!
I love it my guys rpm keep up the work and I love the video lot real true and I love Camaro ss and c7 and happy new year 🎉 💯💯💯💯💯💯
I have those same tires the street ss they are fabulous. Now if i could get my hand on those welds
Love it
Happy New year
Good work
19:50 KACHOW!
you got great tech guys !!steve ahhhhhh !!!lol
I just bought this car. It's fucking awesome.
It was one of the cleanest C7 builds that I have ever seen. Saw it. Had to have it. You guys do amazing work!
Happy 2021
Fran... I'm sorry.
?
Gonna need to build the trans in that white C7 at this point right?
No stock trans can hold the power when tuned properly
Mounting them bead lock wheels aint easy🙄especially while trying not to scratch them🤦♂️
That LT4 has a Procharger on it, why did they keep saying that it was making way more power than the Procharged one?
If you listen we are talking about the Frankenstein intake manifold vs the Procharger intake manifold
@@RaceProvenMotorsports ok thanks, I missed that part.
Does the intake from LME and Frankenstein make about the same amount of hp?
yes
I love the new outro its crazy how much the LT4 can make SBE
I love all your videos I am a small RUclips but I make gameing videos
Dude..when you ran the catch can hose under the throttle body you mentioned it sits right on top of the water pump. From the angle I could see in the video that hose was going to rub against the belt to the water pump...hope you tied it off so it does not hit the water pump belt
Nah we just left it there
STAGE 5 D00000D
Maybe you guys should downgrade the tire machine. It’s no fun with dual rollers. Single roller and 2 pry bars. Yea damage and cost goes up. But so will your views. Besides. Stickies are easier to mount then like 315/35/20. Lol. I love you guys.
The valve covers are nice, but, why not completely relocate the coils, instead of just raising them above the valve covers?
No reason
Looks like that line to the valley pan is laying on the back of the belt.
I thought so also, But if you look a little closer it is actually the pro charger bracket it is close to.
Why does Fran tune with the headlights on?
Probably has the headlights in auto and it’s dark enough In the shop for them to turn on.
So I can see in front of me
@@RaceProvenMotorsports EPIC 😂😂
The Camera guy fucked up lmao
Stage 5 a built trans to?
We listed all mods in the video, if it wasn’t listed it wasn’t included. If it wasn’t included it wasn’t necessary.
@@RaceProvenMotorsports how much is stage 5 package on C7Z? Ballpark
raceprovenmotorsports.com/collections/c7-z06-zr1-performance-packages
@@RaceProvenMotorsports thats awesome. What a beast.
Why don’t you guys do street tests for drive ability
Who said we don’t? .... its just not something we film.
Damn! I'm bored. I'm watching this video twice.
Question for anyone that has a good legit answer. Does this c7 z06's tranny handle that HP? I barely see anything spec wise on the transmissions of these autos with that much power.
Yes. It handles it just fine. It’s all in the tuning
130 likes and zero dislikes
Some dildo, brain 👎 , a rpm video.
Is that other guy frans brother ?
Yes
Before I started watching the channel I ordered an MSD intake from them. I thought Bill was Frans dad when I talked to him. 😂
Mounting beadlocks suck! I have them on my Jeep. Takes a couple hours doing all 5 tires. Round and round we go