THANK YOU! Someone had to say it! I get the concept of this intro and I love these guys but the intros are starting to be a little over the top. Get back to work Steve, we love ya! Mom voice is GOLD. Now curious to know Eric's last name, ED was too funny 🤣🤣
I watch a lot of your videos..👍 You guys do some very clean work. And the tuning is always on point. I don't think anyone would complain with having anything come from your shop.🏁🏁🏁💯🏁🏁
Did that sun shine through when Fran started that white Corvette? Like a sign from God that the prodigal son is among us? lol The intros are getting good.
What’s the wrap you use on the fenders? Did a build on mine this winter and didn’t wrap it... fender covers suck.. front end got scratched to shit... 🤬
What was the size of the lower pulley? Just curious how much more is left in the blower. I run a 3.7 on my D1x with a 8.25 lower and shift at 7000 rpm so spinning the head unit slightly over max recommended impeller speed.
@@reginaldmccall2760 Thank you. I don't own a corvette do you happen to know what the stock lower diameter is on the corvette? On my car it was 7.65, but I'm not sure if that is what they use on all kits.
@@reginaldmccall2760 Thank you. So it has a good amount left in the blower it wouldn't be at max recommended impeller speed until you got down to a 3.7 pulley on the blower. My motor is a 377 LS on E and I've never had it on a dyno that is why I was so curious to kind of guess where I'm at along with my trap speed.
@@lsxtuner6126 I already told Bill I’ll be doing an MSD Intake and Meth with a smaller pulley eventually. I didn’t want to blow my load right away and leave myself smoking the cigarette afterwards with nowhere to go.
Nitto NT05R 345/30/19 Nitto NT555r2 345/30/19 Toyo R888R 345/30/19 All depends what u want, the second one is more daily friendly as far as rain and stuff, also mickey Thompson’s are good just not sure if they are available in that size
When you guys tune a car with meth, do you use straight meth? On my supras methanol, we use boost juice from summit. It's 50/50 mix. I was just curious. A guy I know with a ctsv said he uses straight methanol on his v2. Thanks.
You hit that one rat square on the head these extended warranty companies will go through unearthly measures to sell you a worthless piece of #%+* policy
1 , why wouldn’t someone do meth? And two, you said fueling was at the limit so wouldn’t meth require even more fuel or no? Sorry i’m a just lil na guy lol
Thank's for the love on the intake guys!! Appreciate it greatly.
Steve has too much time with these intros 😂😂 get back to work STEVE! 🤣
You leave Steve alone lol.
@@LICENSEDTOSEND lmao NEVER! When he stops picking on Jerry, I’ll leave him alone 😂😭
THANK YOU! Someone had to say it! I get the concept of this intro and I love these guys but the intros are starting to be a little over the top. Get back to work Steve, we love ya! Mom voice is GOLD. Now curious to know Eric's last name, ED was too funny 🤣🤣
I watch a lot of your videos..👍 You guys do some very clean work. And the tuning is always on point. I don't think anyone would complain with having anything come from your shop.🏁🏁🏁💯🏁🏁
Jerry’s car needs to make an appearance in a video I’m curious as to it’s setup
I'm starting to realize the angrier Eric get's the better the build's come out c7 looking sharp buddy...
That intro is on point
I love when they do the trans tuning!!
That intro alone should get you a raise! 🤣
Love the unexpected drop ins with Eric's mother voice.
It was good to hear from Ericks mom. I haven’t heard from her in a while. We were all worried about her
Classic intro, to funny! Lol, so sick of those calls 🤣
Did that sun shine through when Fran started that white Corvette? Like a sign from God that the prodigal son is among us? lol The intros are getting good.
Great Intro. I must get at least two calls a day for the last 3 week about my warranty about to run out. Great timing on this one. LOL 😂😂👍👍
Phenomenal work, as usual, always impressed. Keep her going!!
Bout time Eric's mom made an appearance.
Perfect timing for lunch!
With an MSD & throttle it would’ve made 30-40 more hp right?
These intros are too damn good lets goooooo
Steve needs a raise with these intros and bringing Eric mom back 🤣😂
Steve, you are going to get a tick!
I think you should make a video of the employees DD and hobby cars.. Curiosity of what everyone has
You are right about those blue gloves, no traction.
That was my favorite so far (intro clip)
That may have been the best Eric’s mother exchange to date.
What’s the wrap you use on the fenders? Did a build on mine this winter and didn’t wrap it... fender covers suck.. front end got scratched to shit... 🤬
raceprovenmotorsports.net/products/blue-fender-wrap-24-x-200?_pos=1&_sid=d9461a664&_ss=r
Damn that vette sounds angry 😤
Hilarious Steve!
So Steve’s evil twin is the one who’s been calling me about my extended warranty for my 1921 model t roadster! Explains a lot 🤣🤣🤣🤣. Awesome intro!!!!
So what tires do you guys recommend at certain power levels?
Looking at C7’s. Should I go for a C7 Z06 or should I procharge a C7 GS?
I love these intros lmao
Excellence always fellas.
Did you get the intro idea from VlogCreations?
Lmao. Steve poking at Eric. 😂😂😂 you know you’re getting someone torqued up when..... 😂😂😂
What was the size of the lower pulley? Just curious how much more is left in the blower. I run a 3.7 on my D1x with a 8.25 lower and shift at 7000 rpm so spinning the head unit slightly over max recommended impeller speed.
Stock Procharger lower
@@reginaldmccall2760 Thank you. I don't own a corvette do you happen to know what the stock lower diameter is on the corvette? On my car it was 7.65, but I'm not sure if that is what they use on all kits.
@@lsxtuner6126 8.125. It attaches to the factory crank pulley.
@@reginaldmccall2760 Thank you. So it has a good amount left in the blower it wouldn't be at max recommended impeller speed until you got down to a 3.7 pulley on the blower. My motor is a 377 LS on E and I've never had it on a dyno that is why I was so curious to kind of guess where I'm at along with my trap speed.
@@lsxtuner6126 I already told Bill I’ll be doing an MSD Intake and Meth with a smaller pulley eventually. I didn’t want to blow my load right away and leave myself smoking the cigarette afterwards with nowhere to go.
What do you guys do for the high side fuel system on an lt1 when you do a build like the corvette.
LT4 pump and injectors
@@RaceProvenMotorsports very nice. I suppose the fuel lobe on the cam is much bigger too.
Yes
I have a grand sport putting 500 to the wheel, oem tire sucks ass. What tire would you recommend for the oem 19” rear wheel
Nitto NT05R 345/30/19
Nitto NT555r2 345/30/19
Toyo R888R 345/30/19
All depends what u want, the second one is more daily friendly as far as rain and stuff, also mickey Thompson’s are good just not sure if they are available in that size
Hey thanks for the help! I really appreciate it. I’ll look into them for sure.
I would love to know approx how much this set up cost on this C7?
Please email us. Sales@raceprovenmotorsports.net
Any reason you guys use the A&A kits on the c6's but procharger on everything else?
AA makes the best brackets for C6’s
Quality first, perfect.
When you guys tune a car with meth, do you use straight meth? On my supras methanol, we use boost juice from summit. It's 50/50 mix. I was just curious. A guy I know with a ctsv said he uses straight methanol on his v2. Thanks.
Yes straight Vp M1
I love it my guys rpm keep up the work and I love the video lot and I love c7 lot 💯💯💯💯💯💯💯💯
We have Got to band together and put an end to these dastardly extended warranty sales minions!
RPM is about to be sponsored by blue chew.
I wanna see a full video of Eric's mother talk
Let Eric's Mom do the intro !
Great intros 🤪👍🏻
You should get Andrew on a intro
Call him Brillo pad....lol
Atleast he didn't ask to park a million dollars in your back account for his Nigerian cousin like he did to me! Let me tell ya how that worked out...
Erictile dysfunction lmfao 🤣
Hahah love the intros steeff
How much boost can a d1x make ?
Boost is simply a measure of restriction
We missed Eric’s mom
I put my car on meth, and the grill fell out. Lesson here kids. Don’t do meth 🤣
Where could a guy pick up a pristine c6 z06?
The intro😂
Damn vehicle warranty people. Lol
Lmfao that intro
Good ole erectile disfunction 😂
I USED to skip the intros everytime.
Someone needs attention, with those intros.
You hit that one rat square on the head these extended warranty companies will go through unearthly measures to sell you a worthless piece of #%+* policy
1 , why wouldn’t someone do meth? And two, you said fueling was at the limit so wouldn’t meth require even more fuel or no? Sorry i’m a just lil na guy lol
No meth is a fuel
Steve I love y'all Channel but your videos are getting shorter and shorter come on man give us a little content
Meh so so intro.
intros are unnecessary.
No offence but these little intros are cringe.
So is spelling offense wrong