Can you use this for Freon or puron? I’m not sure what the differences of compressors are but I’m interested in creating my own air conditioning system.
What is Puron? Google says its R410A Refrigerant, right? This Compressor is designed for R134a. If you use R410A, it would not work propper. R410A has much higher pressure. In fact for R410A you need a smaler compressor (smaller piston) and a stronger Motor, because R410A „works stronger“. I do not know the right words in english. But R410A has a smaller volume at the same power consumption.
@@MrBennisg as of 2020 air conditioners and refrigerators cannot be manufactured in the USA with Freon. It is not illegal to do so because of the EPA (environmental protection agency). I think this is kind of silly because it’s all in a closed system. I’m not very confident the EPA took this into consideration.
@@hinch-man482 I Think there can still Freon be used in the USA. Freon is a trademark. Its a brand by chemours, i think in the past it was dow chemical, but not shure. Maybe even honnywell. These are the big players. Its only important, which kind of Freon you want to use. In europe for example freon 22 aka R22 is strictly forbidden, i think in USA its the same right now. Here Freon 134a is still in use but more and more the replacement gets used, i think its R513A. R513A could maybe used with the purswave tiny compressor. But R513A ist not recommanded. By purswave you only may use R134a. Also R1234yf, but this one is flamable. But the future belongs to the low gwp-refrigerants like R32 and R1234yf and R513A and so on. As i told, the purswave tiny can not be used with R410A and R32 (the replacement for R410A) is the same because both they have a different performance. Higher pressure is one of the reasons.
Not really sure why you connected the discharge to the suction line, you're just pumping already compressed, hot refrigerant into what should be designed for low pressure cooled refrigerant. I wouldn't be surprised if you killed that compressor by doing that. Also not gonna mention that oil slugging.
That was just a test, to hear the sound an to see/fell how it works. I pumped always the same air in a circle so that the oil does not get that much of moisture. I think its PVE oil here, so moisture is not such a big problem as by using POE oil. You can remove moisture from PVE by using vacuum pump and you will not get any acids, if PVE and moisture get in contact. In fact, by the time, i build some small cooling device, but the condenser (even just new from factory) i bought togehther with the compressor is leaking. But the device cooled well. You can see some pics here, but you have to create an account, to sign and whatch pics. kaelte-treffpunkt.de/viewtopic.php?f=18&t=8939
@@MrBennisg Thanks, but you need special permissions to view the pictures. Spent 15 minutes registering and answering skill-testing questions just to see them!
@@haley8004 ohh, you tried to create an account at kaelte-treffpunkt.de? The questions are in german. Can you answere them? Otherwise write a mail to the admin (thomasw), maybe he creates an account for you, without answering the quest. He is a very kind person. 😉
@@MrBennisg Thanks, I was able to make an account, and I saw your pictures. Nice. Its a very similar construction to a water cooler that I have, which I might convert to a cooler fridge.
Schöner Versuch, gibt es für Bastler Bezugsquellen in Deutschland bzw. Alternativen? Ich überlege damit einen Luftentfeuchter fürs Wohnmobil (12V Basis) zu bauen...
Den Kompressor habe ich so mit Steuerung auf aliexpress gekauft. Ca. 150€ incl. der Einfuhrumsatusteuer. Die kommt aber erst vom deutschen Zoll drauf. Du kaufst auf aliexpress (ca. 120 €). Überweisung auf chinesisches Konto. Angst musst du ausblenden. 1-3 Wochen später ruft der deutsche Zoll bei dir an, der bekommt den Beleg von dir per Email und berechnet die Steuer. Die Steuer kassiert UPS an der Haustüre (in bar) und gibt sie an den deutschen Zoll weiter. Alles total easy, aber etwas befremdlich. Das Öl ist original im Kompressor drin, wenn man ihn kauft. Das ist praktisch bei jedem hermetischen Kompressor (Kühlschrank...) so.
Ahh ok, und für welche Anwendung hast Du das Teil gekauft? Ich hatte angenommen das es aus einem Campingkühlschrank o.ä. stammt den Du geschlachtest hast...
Hi, i buy it on aliexpress. m.de.aliexpress.com/item/32812575090.html?aff_trace_key=c9027fe694c343d5a44581a6d767cbad-1515993198242-08722-aUNFm62&aff_short_key=aUNFm62&aff_platform=msite Including taxes it’s about 150€ to Germany. It comes completely with the inverter. I am sad, i didn’t have time already to build some real coolingdevice with that small nice machine, so it’s still waiting in my storage to be used. 😰
Мечта купить такой компрессор....и сделать мини холодильник... когда-то я все же не посмотрю на стоимость и закажу его))
Can you use this for Freon or puron? I’m not sure what the differences of compressors are but I’m interested in creating my own air conditioning system.
What is Puron? Google says its R410A Refrigerant, right?
This Compressor is designed for R134a. If you use R410A, it would not work propper. R410A has much higher pressure. In fact for R410A you need a smaler compressor (smaller piston) and a stronger Motor, because R410A „works stronger“. I do not know the right words in english. But R410A has a smaller volume at the same power consumption.
@@MrBennisg as of 2020 air conditioners and refrigerators cannot be manufactured in the USA with Freon. It is not illegal to do so because of the EPA (environmental protection agency). I think this is kind of silly because it’s all in a closed system. I’m not very confident the EPA took this into consideration.
@@hinch-man482
I Think there can still Freon be used in the USA. Freon is a trademark. Its a brand by chemours, i think in the past it was dow chemical, but not shure. Maybe even honnywell. These are the big players.
Its only important, which kind of Freon you want to use. In europe for example freon 22 aka R22 is strictly forbidden, i think in USA its the same right now. Here Freon 134a is still in use but more and more the replacement gets used, i think its R513A. R513A could maybe used with the purswave tiny compressor. But R513A ist not recommanded. By purswave you only may use R134a. Also R1234yf, but this one is flamable.
But the future belongs to the low gwp-refrigerants like R32 and R1234yf and R513A and so on.
As i told, the purswave tiny can not be used with R410A and R32 (the replacement for R410A) is the same because both they have a different performance. Higher pressure is one of the reasons.
hi the compressor where u buy?
amazon, aliexpress, anywhere, just search tiny compressor r134a
could you please let me know how many db of noise ?
ruclips.net/user/shortsTQ7t1sT8Fz8.
Not really sure why you connected the discharge to the suction line, you're just pumping already compressed, hot refrigerant into what should be designed for low pressure cooled refrigerant. I wouldn't be surprised if you killed that compressor by doing that. Also not gonna mention that oil slugging.
That was just a test, to hear the sound an to see/fell how it works. I pumped always the same air in a circle so that the oil does not get that much of moisture. I think its PVE oil here, so moisture is not such a big problem as by using POE oil. You can remove moisture from PVE by using vacuum pump and you will not get any acids, if PVE and moisture get in contact.
In fact, by the time, i build some small cooling device, but the condenser (even just new from factory) i bought togehther with the compressor is leaking. But the device cooled well.
You can see some pics here, but you have to create an account, to sign and whatch pics.
kaelte-treffpunkt.de/viewtopic.php?f=18&t=8939
@@MrBennisg Thanks, but you need special permissions to view the pictures. Spent 15 minutes registering and answering skill-testing questions just to see them!
@@haley8004 ohh, you tried to create an account at kaelte-treffpunkt.de?
The questions are in german. Can you answere them? Otherwise write a mail to the admin (thomasw), maybe he creates an account for you, without answering the quest. He is a very kind person. 😉
@@MrBennisg Thanks, I was able to make an account, and I saw your pictures. Nice. Its a very similar construction to a water cooler that I have, which I might convert to a cooler fridge.
Where u buy
Schöner Versuch, gibt es für Bastler Bezugsquellen in Deutschland bzw. Alternativen? Ich überlege damit einen Luftentfeuchter fürs Wohnmobil (12V Basis) zu bauen...
welches Öl hast Du genommen?
Den Kompressor habe ich so mit Steuerung auf aliexpress gekauft. Ca. 150€ incl. der Einfuhrumsatusteuer. Die kommt aber erst vom deutschen Zoll drauf. Du kaufst auf aliexpress (ca. 120 €). Überweisung auf chinesisches Konto. Angst musst du ausblenden. 1-3 Wochen später ruft der deutsche Zoll bei dir an, der bekommt den Beleg von dir per Email und berechnet die Steuer. Die Steuer kassiert UPS an der Haustüre (in bar) und gibt sie an den deutschen Zoll weiter. Alles total easy, aber etwas befremdlich.
Das Öl ist original im Kompressor drin, wenn man ihn kauft. Das ist praktisch bei jedem hermetischen Kompressor (Kühlschrank...) so.
m.de.aliexpress.com/item/32818904562.html?pid=808_0003_0101&spm=a2g0n.search-amp.list.32818904562&aff_trace_key=c9027fe694c343d5a44581a6d767cbad-1515993198242-08722-aUNFm62&aff_platform=msite&m_page_id=2113amp-pYK6KMw_19hNJuhOiBPkCw1545053775624
Ahh ok, und für welche Anwendung hast Du das Teil gekauft? Ich hatte angenommen das es aus einem Campingkühlschrank o.ä. stammt den Du geschlachtest hast...
sir can you please send me link where I can buy the rotary compressor
Where to buy
Use of this compressor ?
Ac
Is it a chinese copy of aspen bldc compressor?
it is similar aspen, but we have developed even larger small dc compressor. www.rigidchill.com/
ruclips.net/user/shortsTQ7t1sT8Fz8.
@@rigidcooling7895
Send the details with price
Thegulfoverseas.uae@gmail.com
Prices kia hai is ki pakistan main
Where can we buy one?
miniature dc compressor manufacturer, www.rigidchill.com/
Da para enviar para o Brasil?
ruclips.net/user/shortsTQ7t1sT8Fz8.
Ini belinya dimana?
Very good video
What is your point !!!??????
hlo bro 12 compressors
Price kiea hay is ke
Price kay hai 🏴
I need this compessor..how it posible..from bangladesg....plz help me
Go online and search for it
Hi,
i buy it on aliexpress.
m.de.aliexpress.com/item/32812575090.html?aff_trace_key=c9027fe694c343d5a44581a6d767cbad-1515993198242-08722-aUNFm62&aff_short_key=aUNFm62&aff_platform=msite
Including taxes it’s about 150€ to Germany. It comes completely with the inverter.
I am sad, i didn’t have time already to build some real coolingdevice with that small nice machine, so it’s still waiting in my storage to be used. 😰